Commit Graph

74 Commits

Author SHA1 Message Date
bdrewery
e13d6f8b3f META MODE: Prefer INSTALL=tools/install.sh to lessen the need for xinstall.host.
This both avoids some dependencies on xinstall.host and allows
bootstrapping on older releases to work due to lack of at least 'install -l'
support.

Sponsored by:	EMC / Isilon Storage Division
2015-11-25 19:10:28 +00:00
bapt
594e07bd1b Revert r284417 it is not necessary anymore 2015-06-15 19:28:07 +00:00
bapt
9fb85ece8b Enforce overwritting SHLIBDIR
Since METAMODE has been added, sys.mk loads bsd.mkopt.mk which ends load loading
bsd.own.mk which then defines SHLIBDIR before all the Makefile.inc everywhere.

This makes /lib being populated again.

Reported by:	many
2015-06-15 15:34:20 +00:00
sjg
008d7c831f Add META_MODE support.
Off by default, build behaves normally.
WITH_META_MODE we get auto objdir creation, the ability to
start build from anywhere in the tree.

Still need to add real targets under targets/ to build packages.

Differential Revision:       D2796
Reviewed by: brooks imp
2015-06-13 19:20:56 +00:00
sjg
75a137820d dirdeps.mk now sets DEP_RELDIR 2015-06-08 23:35:17 +00:00
sjg
65145fa4c8 Merge sync of head 2015-05-27 01:19:58 +00:00
imp
d063373948 Remove the stray DEBUG_FLAGS=-g line that snuck in with the
soft-updates journaling project merge in r207141.
2015-05-21 14:36:11 +00:00
sjg
d7cd1d425c Merge head from 7/28 2014-08-19 06:50:54 +00:00
bapt
1f77f137dc use .Mt to mark up email addresses consistently (part3)
PR:		191174
Submitted by:	Franco Fichtner  <franco at lastsummer.de>
2014-06-23 08:23:05 +00:00
sjg
5860f0d106 Updated dependencies 2014-05-16 14:09:51 +00:00
sjg
1a7e48acf1 Updated dependencies 2014-05-10 05:16:28 +00:00
sjg
6d37b86f2b Updated dependencies 2013-03-11 17:21:52 +00:00
sjg
0ee5295509 Updated dependencies 2013-02-16 01:23:54 +00:00
sjg
9f7bd28e77 Updated/new Makefile.depend 2012-11-08 21:24:17 +00:00
marcel
9dd41e3647 Sync FreeBSD's bmake branch with Juniper's internal bmake branch.
Requested by: Simon Gerraty <sjg@juniper.net>
2012-08-22 19:25:57 +00:00
rmh
2685d3b95b Make berase() work on platforms whose kernel lacks DIOCGDELETE ioctl.
Approved by:	kib (mentor)
2011-12-08 12:31:47 +00:00
kib
0807f5f44f Bump shared libraries version numbers in preparation for 9.0.
This time, only libraries which ABI has been changed compared to
stable/8, are bumped.

ABI analysis done by:	Gleb Kurtsou
Approved by:	re (kensmith)
2011-08-28 09:26:48 +00:00
kib
abc49a2c3b Replace ERROR() macro with inline function. In-tree gcc cannot tolerate
the construct like printf("%\s", NULL) resulting from macroexpand of
ERROR(u, NULL), making it impossible to use LIBUFS_DEBUGGING.

With inline function, compiler cannot detect the NULL argument to
known function and does not try to convert it into puts().

In collaboration with:	pho
2011-02-12 12:46:00 +00:00
emaste
05af891041 Search beyond the first 1/8th of inodes.
Submitted by:	jeff
2010-05-01 18:56:45 +00:00
jeff
a574495410 - Merge soft-updates journaling from projects/suj/head into head. This
brings in support for an optional intent log which eliminates the need
   for background fsck on unclean shutdown.

Sponsored by:   iXsystems, Yahoo!, and Juniper.
With help from: McKusick and Peter Holm
2010-04-24 07:05:35 +00:00
imp
85eb7f9c7d i doesn't need to be signed here, make it unsigned. 2010-02-11 17:30:30 +00:00
imp
9c8581b59c Back to WARNS=3. The breakage wasn't what I thought it was :( 2010-02-11 07:09:04 +00:00
mckusick
f9458438c7 Keep Tinderbox happy. 2010-02-11 06:22:38 +00:00
imp
be7547b385 Increased warnings weren't tested on ARM. Bump warnings back down to
0 until it can be properly tested by those raising the warnings.
Remember: make universe is required when changing the WARNS level.
2010-02-11 04:45:08 +00:00
ed
09818ac28e Build lib/ with WARNS=6 by default.
Similar to libexec/, do the same with lib/. Make WARNS=6 the norm and
lower it when needed.

I'm setting WARNS?=0 for secure/. It seems secure/ includes the
Makefile.inc provided by lib/. I'm not going to touch that directory.
Most of the code there is contributed anyway.
2010-01-02 09:58:07 +00:00
jmallett
a546579eb7 Allow libufs(3) functions to operate on a regular file. This makes it possible to
use almost anything that uses libufs(3) against a file as an unprivileged user, e.g.
tunefs(8) and dumpfs(8) against a makefs(8)-created image.

Prodded by:	kensmith
2009-06-11 18:04:57 +00:00
delphij
f0600f6414 Bail out when memory allocation is failed, rather than referencing
a NULL pointer.

PR:		kern/94480
Submitted by:	Michiel Pelt <m.pelt xs4all nl>
2009-04-02 17:16:39 +00:00
phk
f9bd6ffc2d Add a berase() function which uses ioctl(DIOCGDELETE) to erase a slab
of the disk.
2007-12-16 18:02:37 +00:00
pjd
781b031d07 The ufs_disk_fillout(3) can take special device name (with or without /dev/
prefix) as an argument and mount point path. At the end it has to find
device name file system is stored on, which means when mount point path is
given, it tries to look into /etc/fstab and find special device
corresponding to the given mount point. This is not perfect, because it
doesn't handle the case when file system is mounted by hand and mount point
is given as an argument.

I found this problem while trying to use snapinfo(8), which passes mount
points to the ufs_disk_fillout(3) function, but I had file system mounted
manually, so snapinfo(8) was exiting with the error below:

	ufs_disk_fillout: No such file or directory

I modified libufs(3) to handle those arguments (the order is important):

1. special device with /dev/ prefix
2. special device without /dev/ prefix
3. mount point listed in /etc/fstab, directory exists
4. mount point listed in /etc/fstab, directory doesn't exist
5. mount point of a file system mounted by hand
2007-03-16 03:13:28 +00:00
pjd
51fb042070 Implement cgwrite1(3) function which stored a given cylinder group on disk.
Sponsored by:	home.pl
2006-10-31 21:21:48 +00:00
keramida
5b312e287b minor style.Makefile(5) fixes:
- WARNS before CFLAGS
- CFLAGS -DXXX before -IXXX

Approved by:	ru
2005-09-26 06:23:43 +00:00
jmallett
ae452b72d8 Remove getino(3) manpage. It doesn't document what is here, what is here should
not get documented, and what it does document isn't going to come to CVS any
time in the immediate future.

Patience of a saint:	trhodes
2005-08-31 08:36:05 +00:00
trhodes
2fefdd26d1 Disconnect getino.3 and remove MLINK I added.
Discussed with:	jmallett
2005-08-31 07:44:45 +00:00
trhodes
bd7fc84c8f Hook getino.3 up to the build and link it to putino.3.
PR:	83820
2005-08-25 10:22:29 +00:00
ru
0f1929cc0e Fixed xrefs. 2005-01-21 10:35:40 +00:00
ru
fb1f106142 Markup fixes. 2004-07-05 06:53:34 +00:00
ru
6651f20e0d Sort SEE ALSO references (in dictionary order, ignoring case). 2004-07-04 20:55:50 +00:00
ru
4b39413aeb Removed trailing whitespace. 2004-07-02 19:07:33 +00:00
ru
4498f82b4e Fixed spelling of the document date. 2004-07-02 18:00:03 +00:00
hmp
f280804c96 Remove unneccessary include of sys/types.h in the SYNOPSIS
header.

Sys/param.h includes sys/types.h internally unless LOCORE is
defined.

Approved by:	des (mentor)
2003-10-09 09:45:20 +00:00
phk
02fccf5b64 Add XXX'ed temporary bounce-buffering. 2003-10-07 07:12:22 +00:00
obrien
372364ee0f style.Makefile(5) 2003-08-18 15:25:39 +00:00
gordon
5901302929 Stage 3 of dynamic root support. Make all the libraries needed to run
binaries in /bin and /sbin installed in /lib. Only the versioned files
reside in /lib, the .so symlink continues to live /usr/lib so the
toolchain doesn't need to be modified.
2003-08-17 08:28:46 +00:00
mdodd
38747cd3f8 Correct an apparent typo.
PR:		 bin/53515
Submitted by:	 Lukas Ertl <l.ertl@univie.ac.at>
Approved by:	 jmallett
2003-06-19 22:12:54 +00:00
jmallett
25cc522581 Various cleanups of careless mistakes/omissions.
PR:		53149
Submitted by:	Lukas Ertl <l.ertl@univie.ac.at>
2003-06-10 18:36:16 +00:00
jmallett
e5d76875b9 Left out the critical part of my "public domain" template, a notice saying
that this file is (these files are) in the public domain.

PR:		53149
2003-06-10 18:24:40 +00:00
jmallett
6cf3ba1323 Commit rudimentary libufs manual pages, except for that for
getino(3)/putino(3), inode.c has been reworked in Perforce to the point
where a manual page may not be accurate.  Certainly putino(3) has not
even been merged back yet.

These will need a lot of improvement for most applications, but they
document the API enough to get someone on their feet, most likely.  The
best documentation still exists in the form of libufs(3) consumers in the
base system.
2003-06-09 09:59:11 +00:00
jmallett
088f7e9d08 Remove ufs_disk_ctor and ufs_disk_dtor, they never came to fruition. I do
not know of any software using them, and there is no "published API" for
libufs, as it were.
2003-06-09 09:47:38 +00:00
jmallett
0e96b35689 Reduce diffs with code in Perforce:
Parenthesise return values.
2003-06-09 09:32:29 +00:00
jmallett
17460ae6f3 MFp4: Fix copy&paste English error. 2003-03-30 18:00:24 +00:00