characters was reversed, resulting in some network appliances, including
at least some NAS devices from Ascend, not recognizing our finger(1)
request.
PR: 45914
Submitted by: J R Matthews <jrm@delta-e.com.au>
Approved by: re (rwatson)
MFC after: 2 weeks
The /usr/bin/perl wrapper isn't solving many of the problems it was
imported to deal with. There are limitations to it that don't have a
clear "fix".
Reviewed by: markm, kris
Extorted approval from: re(jhb)
Revert to using the .Tn POSIX and .Tn ANSI instead of \*[Px] and \*[Ai]
strings; using these strings is unsafe in troff mode, as they include a
change in a font size.
Approved by: re
Has been seen to work on several cards and communicating with
several mobile phones to use them as modems etc.
We are still talking with 3com to try get them to allow us to include
the firmware for their pccard in the driver but the driver is here..
In the mean time
it can be downloaded from the 3com website and loaded using the utility
bt3cfw(8) (supplied) (instructions in the man page)
Not yet linked to the build
Submitted by: Maksim Yevmenkin <myevmenk@exodus.net>
Approved by: re
the deprecated utime(3). utimes(2) uses timeval, but utime(3) uses
time_t's. If you do bad things (like I did) by mixing up include files
with libc, then install can do strange things if you mismatch the time_t
stuff. utime() is emulated entirely within libc.
Approved by: re (jhb)
time_t. Deal with the possibility that time_t != int32_t. This boils
down to this sort of thing:
- time(&ut.ut_time);
+ ut.ut_time = time(NULL);
and similar for ctime(3) etc. I've kept it minimal for the stuff
that may need to be portable (or 3rd party code), but used Matt's time32
stuff for cases where that isn't as much of a concern.
Approved by: re (jhb)
Registry (LACNIC) with the -l option and support for recursive IP
address searches.
PR: 44448
Submitted by: David Wolfskill <david@catwhisker.org>
MFC after: 1 week
1) Missing include.
2) Constness.
3) ANSIfication.
4) Avoid some shadowing.
5) Add/clarify some error messages.
6) Some int functions were using return without a value.
7) Mark some parameters as unused.
8) Cast a value we know is non-negative to a size_t before comparing.
to Fatal errors, because the logic that we use to try to continue is far
too broken, and makes things look and act weird, because we end up pointing
past the end of a buffer boundry into freed memory in the caller, as we
don't come close to setting the lengthPtr to a sane value.
Reviewed by: make@
(This only changes failure cases which would have died horrid deaths to
explicit clean death failure cases.)
o Remove static function uuid_print(); use uuid_to_string(3) in
combination with printf(3) to achieve the same,
o Remove unneeded includes,
o Add a reference to uuid(3) to the manpage.
Different code that processes the input in similar ways should be
called in similar ways. File-local stuff should be static. Output
errors should be checked for. Diffs sometimes have to be big.
when the filename comes from the untrusted input. This is a work-around
for careless people who don't routinely check the begin line of the file
or run uudecode -i and instead report "vulnerabilities" to CERT.
http://www.kb.cert.org/vuls/id/336083
a nop, but we'll probably want to keep it for compatibility with other
KAME-based systems.
Complained about by: Andrey Lakhno <land@dnepr.net>
MFC after: 3 days
Don't gratuitously pipe thru a cat(1) if NODOCCOMPRESS.
Only create _stamp.extra when necessary.
Get rid of SOELIMPP and OBJS.
Use Groff version of soelim(1); we need its -I option
for the following to work.
Don't needlessly chdir to SRCDIR. Only a few documents
need CD_HACK, and those that need it either use refer(1)
or .PSPIC macro which internally uses the .psbb call.
to var_modify.c, for readability. constify some low hanging fruit (string
manipulation functions) and the upper layers appropriately. No longer use
the private strstr(3) implementation, while changing string code.
Tested by: lots of successful make buildworld.
Re-add alarm(2) calls around the calls to fetchStat(3) and fetchXGet(3),
since these calls can still time out on DNS lookups or TCP connect(2).
Remove the alarm(2) calls in the main loop, since all methods properly
handle transfer timeouts (as opposed to connection timeouts).
Set the sigalrm flag if a timeout occurs in the main loop.
Move the signal: label up a little so we still set the atime and mtime
when the transfer times out or is interrupted, so that restarted transfers
will work as expected (as long as the file still exists).
MFC after: 2 weeks
so this should be officially TC1 before the New Year.)
Add TrustedBSD pathconf parameters.
Add compilation support for -stable (to be merged momentarily).
data that will be modified. And do the appropriate thing now and free the
v->name buffer along with other relinquished memory.
XXX There is duplication here of destroying a Var, which is probably bogus,
and probably missed in a few places.
might help on the systems it could possibly be used as a bandaid for. In
fact, the only thing it's useful for is instrumenting free(3) calls, and in
that capacity, it's better served as a local patch, than a public wrapper.
also set the user's MAC label as part of the user credential setup
by setting setusercontext(3)'s SETMAC flag. By default, change only
traditional process properties.
Approved by: re
Obtained from: TrustedBSD Project
Sponsored by: DARPA, Network Associates Laboratories
Clarify that the USSR no longer exists, but some of the holidays are
celebrated anyway.
Reviewed in part by: ru
Remove Jewish and most Muslim holidays. They're all wrong, since they
don't apply to the Western calendar. The much more complete Jewish
holidays are in calendar.judaic. The Muslim holidays need to be
collected into a file, but there's not much point in having the wrong
date.
Remove many Fiji holidays. They change every year by Government
decree, and some were duplicated as a result.
Remove some duplicates.
There's still a lot to be done; in particular, I think the Japanese
and British holidays are very inaccurate. This file needs checking by
people who know the details.
even if there was no error occured (when trying to dlopen(3) object that
already linked into executable which does dlopen(3) call). This is more
proper fix for `ldd /usr/lib/libc.so' problem, because the new behaviour
conforms to documentation.
Remove workaround from ldd.c (rev.1.32).
PR: 35099
Submitted by: Nathan Hawkins <utsl@quic.net>
MFC after: 1 week
on allocation failure instead of displaying a warning and deferencing NULL
pointer after. Spelling. Add prototypes. Add list of option in synopsis section
of man page, -d is not referenced because available as a compile option. It
should be made a runtime option btw.
for locale related things. So, I think it could be useful for
others. It's not yet implement (or implement in different manner)
all POSIX things, but I think it's good enough for start.
POSIX conformance related updates and manpage to follow relatively soon.
``.'' is not a sentence termination, it must be escaped to be put inside
quotes.
Abort if execv() fails by adding err(). Do not dot terminate error messages.
In "nroff" mode, italic font renders as an underlined text, which
makes it indistinguishable from the bold text on color monitors
(cons25 terminal type), yet it requires the less(1)'s -R option.
(Refer to the new grotty(1) manpage for details.)
So turn off the color support for now (when generating catpages),
until we figure out what do we do with this new feature. I have
a patch for grotty(1) that tells it to use the "reverse video"
attribute to render the italic font. Once this is accepted, we
can turn color support back on (if there won't be any objections
from the community).
compatability-geared util.c. These are things like message printers
and the PrintAddr function for traversing lists. Other general-purpose
utilities inside make(1) can go here, in time.
documentation already adequatedly existed in the description in most
cases. Where it did not, it was added. If no documentation existed
beforehand, then none was added. Some unused dummies for use in the
traversal functions were marked as __unused during the conversion.
Occasionally, local style fixes were applied to lines already being
modified or influenced.
Now make(1) should always build with WARNS=3.
instead of polling for them.
Unfortunately we cannot enable it yet because it panics the kernel
somewhere in kqueue.
Submitted by: Stefan Farfeleder <e0026813@stud3.tuwien.ac.at>
there from being more than 500 processes forked by make(1), to prevent a
forkbomb from happening, in a dumb and mechanical way.
PR: alane
Submitted by: bin/42772
MFC after: 2 weeks
renaming variables to not shadow libc functions or greater scope locals. Kinda
makes one wonder if the extern ones weren't meant in some of these places :)
The only thing I'd still like to do WRT this is possibly combine rstat and
status in compat.c -- that should be fine, as I do not think the codepaths
will want both around at once.
Sponsored by: Bright Path Solutions
in compat.c which doesn't even have preprocessor-conditional-hidden support
code, and add a debugging statement where we might end up with a nil list
somehow, but where I doubt it.
First confirmed userland kill for Flexelint.
Sponsored by: Bright Path Solutions
constant controlling expressions: in particular, removing #if 0 sections
is considered "rude". This commit changes the default so that such
things are passed through unchanged, and the old behaviour can be had
with the -k "kill konsts" flag.
Suggested by: markm
MFC after: 3 weeks
variable natively. It should allow you to use any sysctl mib set, but due
to limitations of what I can do with macros, right now it's limited to two,
which is all this program used anyway.
Sponsored by: Bright Path Solutions
hack, thereby allowing future extensions to the structure (e.g., for extended
attributes) without rebreaking the ABI. FTSENT now contains a pointer to the
parent stream, which fts_compar() can then take advantage of, avoiding the
undefined behavior previously warned about. As a consequence of this change,
the prototype of the comparison function passed to fts_open() has changed
to reflect the required amount of constness for its use. All callers in the
tree are updated to use the correct prototype.
Comparison functions can now make use of the new parent pointer to access
the new stream-specific private data pointer, which is intended to assist
creation of reentrant library routines which use fts(3) internally.
Not objected to in spirit by: -arch
intent of the Standard.
- Make getconf able to distinguish between configuration variables which
are entirely unknown and those which are merely not defined in the
compilation environment. The latter now get a more appropriate
"undefined\n" result rather than a diagnostic. This may not be
exactly right, but it's closer to the intent of the Standard than
the previous behavior.
- Support ``programming environments'' by validating that the environment
requested with the `-v' flag is the one-and-only execution environment.
(If more environments are supported for some platforms in the future,
multiple getconf(1) executables will be required, but a simple edit in
progenv.gperf will enable automatic support for it.) Document POSIX
standard programming environments.
- Add all of the 1003.1-2001 configuration variables. FreeBSD does not
support all of these (including some that are mandatory); getconf will
later be fixed to break the world should a required variable not be
defined.
As a result of all these changes, gperf is no longer adequate. Keep the
overall format and names of the files for now, to preserve revision history.
Use an awk script to process the .gperf files into C source, which does a
few things that gperf, as a more general tool, cannot do. The keyword
recognition function is no longer a perfect hash function.
This may obviate the need for gperf in the source tree.
- Add a small compile-time regression test to break the build if any of the
.gperf files declare conflicting token sets. (gperf itself would have done
this for the simple case of duplicate tokens in the same input file.)
sbsize. Also, correct the format string in getopt(3) usage to reflect
that -b takes an argument, and correct another case of RLIMIT_SBSIZE
having been forgotten.
whois.apnic.net. To properly receive hints for recursive IP searches,
we convert a buffer to lowercase before searching for magic words.
PR: 42834
Submitted by: Andre Albsmeier <andre.albsmeier@mchp.siemens.de> (mostly)
X-MFC-After: re approval
gperf's behavior as we ever actually needed here. This generates
a much-less-efficient keyword recognizer, but it's not like that matters
in this application. Makefile changes coming once this passes the world
test.
variable length arguments to a macro. Bump version as this makes DEBUG
statements *always* go to stderr rather than sometimes stdout. There are
a few stragglers, which I will take care of as soon as I can. Mostly these
relate to the need-for-death-of some of the remote job code.
Nearby stylistic nits and XXX added/fixed where appropriate.
under way to move the remnants of the a.out toolchain to ports. As the
comment in src/Makefile said, this stuff is deprecated and one should not
expect this to remain beyond 4.0-REL. It has already lasted WAY beyond
that.
Notable exceptions:
gcc - I have not touched the a.out generation stuff there.
ldd/ldconfig - still have some code to interface with a.out rtld.
old as/ld/etc - I have not removed these yet, pending their move to ports.
some includes - necessary for ldd/ldconfig for now.
Tested on: i386 (extensively), alpha
file so that we have a chance of using gcore on non-i386 platforms. Use
linker sets to reduce the registration glue. Remove md-sparc.c, we do not
have an a.out sparc32 port. aoutcore.c was repocopied from gcore.c.
