The function name expandstr() and the general idea of doing this kind of
expansion by treating the text as a here document without end marker is from
dash.
All variants of parameter expansion and arithmetic expansion also work (the
latter is not required by POSIX but it does not take extra code and many
other shells also allow it).
Command substitution is prevented because I think it causes too much code to
be re-entered (for example creating an unbounded recursion of trace lines).
Unfortunately, our LINENO is somewhat crude, otherwise PS4='$LINENO+ ' would
be quite useful.
If the here-document is attached to a compound command or subshell, $?
already works properly. This is both a workaround for bin/41410 and a
requirement for a true fix for bin/41410.
PR: bin/41410
MFC after: 1 week
checks for collision/non-collision properties in binding them. This
test would have identified a bug recently reported on current@
involding my disaggregation of the pcbinfo lock.
It would be nice if this test also exercised packet diversion and
injection, but that is for another day.
MFC after: 3 days
Sponsored by: Juniper Networks, Inc.
rather than using a fixed port number. This means that the regression test
can be run many times in a row without waiting on TIMEWAIT to release a
hard-coded port number.
MFC after: 3 days
Sponsored by: Juniper Networks, Inc.
Examples:
LC_ALL=en_US.UTF-8 printf '%d\n' $(printf \'\\303\\244)
LC_ALL=en_US.ISO8859-1 printf '%d\n' $(printf \'\\344)
Both of these should print 228.
Like some other shells, incomplete or invalid multibyte characters yield the
value of the first byte without a warning.
Note that there is no general way to go back from the character code to the
character.
CDPATH should be ignored not only for pathnames starting with '/' but also
for pathnames whose first component is '.' or '..'.
The man page already describes this behaviour.
If IFS is null, unquoted $@/$* should still expand to separate words.
This differs from quoted $@ (which does not depend on IFS) in that pathname
generation is performed and empty words are removed.
This reflects failure to determine the pathname of the new directory in the
exit status (1). Normally, cd returns successfully if it did chdir() and the
call was successful.
In POSIX, -e only has meaning with -P; because our -L is not entirely
compliant and may fall back to -P mode, -e has some effect with -L as well.
This is sometimes used with eval or old-style command substitution, and most
shells other than ash derivatives allow it.
It can also be used with scripts that violate POSIX's requirement on the
application that they end in a newline (scripts must be text files except
that line length is unlimited).
Example:
v=`cat <<EOF
foo
EOF`
echo $v
This commit does not add support for the similar construct with new-style
command substitution, like
v=$(cat <<EOF
foo
EOF)
This continues to require a newline after the terminator.
Because we have no iconv in base, support for other charsets is not
possible.
Note that \u/\U are processed using the locale that was active when the
shell started. This is necessary to avoid behaviour that depends on the
parse/execute split (for example when placing braces around an entire
script). Therefore, UTF-8 encoding is implemented manually.
?, [...] patterns match codepoints instead of bytes. They do not match
invalid sequences. [...] patterns must not contain invalid sequences
otherwise they will not match anything. This is so that ${var#?} removes the
first codepoint, not the first byte, without putting UTF-8 knowledge into
the ${var#pattern} code. However, * continues to match any string and an
invalid sequence matches an identical invalid sequence. (This differs from
fnmatch(3).)
A string between $' and ' may contain backslash escape sequences similar to
the ones in a C string constant (except that a single-quote must be escaped
and a double-quote need not be). Details are in the sh(1) man page.
This construct is useful to include unprintable characters, tabs and
newlines in strings; while this can be done with a command substitution
containing a printf command, that needs ugly workarounds if the result is to
end with a newline as command substitution removes all trailing newlines.
The construct may also be useful in future to describe unprintable
characters without needing to write those characters themselves in 'set -x',
'export -p' and the like.
The implementation attempts to comply to the proposal for the next issue of
the POSIX specification. Because this construct is not in POSIX.1-2008,
using it in scripts intended to be portable is unwise.
Matching the minimal locale support in the rest of sh, the \u and \U
sequences are currently not useful.
Exp-run done by: pav (with some other sh(1) changes)
Note that this only applies to variables that are actually used.
Things like (0 && unsetvar) do not cause an error.
Exp-run done by: pav (with some other sh(1) changes)
In particular, this makes things like ${#foo[0]} and ${#foo[@]} errors
rather than silent equivalents of ${#foo}.
PR: bin/151720
Submitted by: Mark Johnston
Exp-run done by: pav (with some other sh(1) changes)
Ensure that system calls that access global namespaces, e.g. open(2), are not permitted, and that whitelisted sysctls like kern.osreldate are.
Approved by: rwatson
Sponsored by: Google, Inc.
For backgrounded pipelines and subshells, the previous value of $? was being
preserved, which is incorrect.
For backgrounded simple commands containing a command substitution, the
status of the last command substitution was returned instead of 0.
If fork() fails, this is an error.
If EV_EXIT causes an exit, use the exception mechanism to unwind
redirections and local variables. This way, if the final command is a
redirected command, an EXIT trap now executes without the redirections.
Because of these changes, EV_EXIT can now be inherited by the body of a
function, so do so. This means that a function no longer prevents a fork
before an exec being skipped, such as in
f() { head -1 /etc/passwd; }; echo $(f)
Wrapping a single builtin in a function may still cause an otherwise
unnecessary fork with command substitution, however.
An exit command or -e failure still invokes the EXIT trap with the
original redirections and local variables in place.
Note: this depends on SHELLPROC being gone. A SHELLPROC depended on
keeping the redirections and local variables and only cleaning up the
state to restore them.
- Test newslog with clasic naming of rotates files to actually test
the correct number of log files as newsyslog now does the correct
thing post r220926.
- Add some more newsyslog tests which tests keeping 0, 1, and 2
logfiles.
This is only a problem if IFS contains digits, which is unusual but valid.
Because of an incorrect fix for PR bin/12137, "${#parameter}" was treated
as ${#parameter}. The underlying problem was that "${#parameter}"
erroneously added CTLESC bytes before determining the length. This
was properly fixed for PR bin/56147 but the incorrect fix was not backed
out.
Reported by: Seeker on forums.freebsd.org
MFC after: 2 weeks
Of course, strerror_r() may still fail with ERANGE.
Although the POSIX specification said this could fail with EINVAL and
doing this likely indicates invalid use of errno, most other
implementations permitted it, various POSIX testsuites require it to
work (matching the older sys_errlist array) and apparently some
applications depend on it.
PR: standards/151316
MFC after: 1 week
These already worked: $# ${#} ${##} ${#-} ${#?}
These now work as well: ${#+word} ${#-word} ${##word} ${#%word}
There is an ambiguity in the standard with ${#?}: it could be the length of
$? or it could be $# giving an error in the (impossible) case that it is not
set. We continue to use the former interpretation as it seems more useful.
The test was support to check if SUID/SGID bits are removed on first
write, but actually we were checking if they were removed after close.
Now we can check if SUID/SGID bits are gone after first write.
While here add checks to see if when both SUID and SGID bits are set they are
both cleared on first write.
- fchmod(2),
- fchown(2),
- fchflags(2),
- fstat(2),
- ftruncate(2),
- fpathconf(2),
- lpathconf(2).
Make write(2) syscall to take descriptor instead of file name.
We implement descriptors by keeping track of open files and allowing to
reference them by the following syscalls. Because pjdfstest already supports
executing multiple syscalls from one command it works pretty well.
For example, the following command:
pjdfstest open foo "O_CREAT,O_RDWR" 0 : open bar "O_CREAT,O_RDONLY" 640 : fchmod 0 0666 : fchown 0 -1 20 : fchmod 1 0444
is equivalent of (error checking omitted):
int fd[2];
fd[0] = open("foo", O_CREAT | O_RDWR, 0);
fd[1] = open("bar", O_CREAT | O_RDONLY, 0640);
fchmod(fd[0], 0666);
fchown(fd[0], -1, 20);
fchmod(fd[1], 0444);
Preserving $? may cause problems particularly if set -e is in effect.
It may be useful to preserve the old value of $? in the dot script but this
must not be implemented in such a way that it would break this test.
* In {(...) <redir1;} <redir2, do not drop redir1.
* Maintain the difference between (...) <redir and {(...)} <redir:
In (...) <redir, the redirection is performed in the child, while in
{(...)} <redir it should be performed in the parent (like {(...); :;}
<redir)
POSIX requires this and it is simpler than the previous code that remembered
command locations when appending directories to PATH.
In particular,
PATH=$PATH
is no longer a no-op but discards all cached command locations.
If execve() returns an [ENOEXEC] error, check if the file is binary before
trying to execute it using sh. A file is considered binary if at least one
of the first 256 bytes is '\0'.
In particular, trying to execute ELF binaries for the wrong architecture now
fails with an "Exec format error" message instead of syntax errors and
potentially strange results.
When a foreground job exits on a signal, a message is printed to stdout
about this. The buffer was not flushed after this which could result in the
message being written to the wrong file if the next command was a builtin
and had stdout redirected.
Example:
sh -c 'kill -9 $$'; : > foo; echo FOO:; cat foo
Reported by: gcooper
MFC after: 1 week
This is useful so that it is easier to exit on a signal than to reset the
trap to default and resend the signal. It matches ksh93. POSIX says that
'exit' without args from a trap action uses the exit status from the last
command before the trap, which is different from 'exit $?' and matches this
if the previous command is assumed to have exited on the signal.
If the signal is SIGSTOP, SIGTSTP, SIGTTIN or SIGTTOU, or if the default
action for the signal is to ignore it, a normal _exit(2) is done with exit
status 128+signal_number.
* Make 'trap --' do the same as 'trap' instead of nothing.
* Make '--' stop option processing (note that '-' action is not an option).
Side effect: The error message for an unknown option is different.
When running with a custom locale setup, it's easy to confuse the
date regression tests and cause them to fail, e.g. when LANG='C'
but LC_ALL='el_GR.UTF-8'. Set LC_ALL to 'C', which overrides all
other LC_xxx options, to avoid this sort of problem.
Reviewed by: uqs, edwin
All builtins are now always found before a PATH search.
Most ash derivatives have an undocumented feature where the presence of an
entry "%builtin" in $PATH will cause builtins to be checked at that point of
the PATH search, rather than before looking at any directories as documented
in the man page (very old versions do document this feature).
I am removing this feature from sh, as it complicates the code, may violate
expectations (for example, /usr/bin/alias is very close to a forkbomb with
PATH=/usr/bin:%builtin, only /usr/bin/builtin not being another link saves
it) and appears to be unused (all the %builtin google code search finds is
in some sort of ash source code).
Note that aliases and functions took and take precedence above builtins.
Because aliases work on a lexical level they can only ever be overridden on
a lexical level (quoting or preceding 'builtin' or 'command'). Allowing
override of functions via PATH does not really fit in the model of sh and it
would work differently from %builtin if implemented.
Note: POSIX says special builtins are found before functions. We comply to
this because we do not allow functions with the same name as a special
builtin.
Silence from: freebsd-hackers@ (message sent 20101225)
Discussed with: dougb
It should use the original exit status, just like falling off the
end of the trap handler.
Outside an EXIT trap, 'exit' is still equivalent to 'exit $?'.
- Sort the includes of pack.c, moving sys/*.h files near the top.
- Add a couple of missing #include lines, and remove the need for
custom -include options in the CFLAGS of the test Makefile.
- Remove the ad-hoc 'all' target, but keep its 'regress' bits for
testing.
- Convert the ad-hoc 'clean' target to proper CLEANFILES stuff,
so that the normal bsd.prog.mk machinery can clean up.
- Use `make -V .OBJDIR' to detect the place where 'pack' lives,
so that regress.t works both with and without 'make obj'.
Reviewed by: uqs
MFC after: 1 week
An error message is written, the builtin is not executed, nonzero exit
status is returned but the shell does not abort.
This was already checked for special builtins and external commands, with
the same consequences except that the shell aborts for special builtins.
Obtained from: NetBSD
Change the criterion for builtins to be safe to execute in the same process
in optimized command substitution from a blacklist of only cd, . and eval to
a whitelist.
This avoids clobbering the main shell environment such as by $(exit 4) and
$(set -x).
The builtins jobid, jobs, times and trap can still show information not
available in a child process; this is deliberately permitted. (Changing
traps is not.)
For some builtins, whether they are safe depends on the arguments passed to
them. Some of these are always considered unsafe to keep things simple; this
only harms efficiency a little in the rare case they are used alone in a
command substitution.
Before considering to execute a command substitution in the same process,
check if any of the expansions may have a side effect; if so, execute it in
a new process just like happens if it is not a single simple command.
Although the check happens at run time, it is a static check that does not
depend on current state. It is triggered by:
- expanding $! (which may cause the job to be remembered)
- ${var=value} default value assignment
- assignment operators in arithmetic
- parameter substitutions in arithmetic except ${#param}, $$, $# and $?
- command substitutions in arithmetic
This means that $((v+1)) does not prevent optimized command substitution,
whereas $(($v+1)) does, because $v might expand to something containing
assignment operators.
Scripts should not depend on these exact details for correctness. It is also
imaginable to have the shell fork if and when a side effect is encountered
or to create a new temporary namespace for variables.
Due to the $! change, the construct $(jobs $!) no longer works. The value of
$! should be stored in a variable outside command substitution first.
This test verifies that certain expansions without side effects do not
cause the command substitution to be executed in a child process.
This is not a correctness requirement, but it involves a nontrivial amount
of code and it would be unfortunate if it stopped working.
Command substitutions consisting of a single simple command are executed in
the main shell process but this should be invisible apart from performance
and very few exceptions such as $(trap).
If a command substitution consists of one special builtin and there is a
redirection error, this should not abort the outer shell.
It was fixed in r201366 by ignoring special builtin properties for command
substitutions consisting of one builtin.
The #define for warnx now behaves much like the libc function (except that
it uses sh command name and output).
Also, it now uses C99 __VA_ARGS__ so there is no need for three different
macros for 0, 1 or 2 parameters.
Constants in arithmetic starting with 0 should be octal only.
This avoids the following highly puzzling result:
$ echo $((018-017))
3
by making it an error instead.
The CTLESC byte to protect a special character was output before instead of
after a newline directly preceding the special character.
The special handling of newlines is because command substitutions discard
all trailing newlines.
When a fast machine first brings up some non TCP networking program
it is quite possible that we will drop packets due to the fact that
only one packet can be held per ARP entry. This leads to packets
being missed when a program starts or restarts if the ARP data is
not currently in the ARP cache.
This code adds a new sysctl, net.link.ether.inet.maxhold, which defines
a system wide maximum number of packets to be held in each ARP entry.
Up to maxhold packets are queued until an ARP reply is received or
the ARP times out. The default setting is the old value of 1
which has been part of the BSD networking code since time
immemorial.
Expose the time we hold an incomplete ARP entry by adding
the sysctl net.link.ether.inet.wait, which defaults to 20
seconds, the value used when the new ARP code was added..
Reviewed by: bz, rpaulo
MFC after: 3 weeks
Convert the tests to the perl prove format.
Remove obsolete TEST.README (results of an old TEST.sh for some old Unices)
and TEST.csh (old tests without correct values, far less complete than
TEST.sh).
MFC after: 1 week
This moves the function of the noaliases variable into the checkkwd
variable. This way it is properly reset on errors and aliases can be used
normally in the commands for each case (the case labels recognize the
keyword esac but no aliases).
The new code is clearer as well.
Obtained from: dash
Apart from detecting breakage earlier or at all, this also fixes a segfault
in the testsuite. The "handling" of the breakage left an invalid internal
representation in some cases.
Examples:
echo a; do echo b
echo `) echo a`
echo `date; do do do`
Exp-run done by: pav (with some other sh(1) changes)
subevalvar() incorrectly assumed that CTLESC bytes were present iff the
expansion was quoted. However, they are present iff various processing such
as word splitting is to be done later on.
Example:
v=@$e@$e@$e@
y="${v##*"$e"}"
echo "$y"
failed if $e contained the magic CTLESC byte.
Exp-run done by: pav (with some other sh(1) changes)
The code is inspired by NetBSD sh somewhat, but different because we
preserve the old Almquist/Bourne/Korn ability to have an unquoted part in a
quoted ${v+word}. For example, "${v-"*"}" expands to $v as a single field if
v is set, but generates filenames otherwise.
Note that this is the only place where we split text literally from the
script (the similar ${v=word} assigns to v and then expands $v). The parser
must now add additional markers to allow the expansion code to know whether
arbitrary characters in substitutions are quoted.
Example:
for i in ${$+a b c}; do echo $i; done
Exp-run done by: pav (with some other sh(1) changes)
If double-quote state does not match, treat the '}' literally.
This ensures double-quote state remains the same before and after a
${v+-=?...} which helps with expand.c.
It makes things like
${foo+"\${bar}"}
which I have seen in the wild work as expected.
Exp-run done by: pav (with some other sh(1) changes)
This is a syntax error.
POSIX does not say explicitly whether defining a function with the same name
as a special builtin is allowed, but it does say that it is impossible to
call such a function.
A special builtin can still be overridden with an alias.
This commit is part of a set of changes that will ensure that when
something looks like a special builtin to the parser, it is one. (Not the
other way around, as it remains possible to call a special builtin named
by a variable or other substitution.)
Exp-run done by: pav (with some other sh(1) changes)
Add some conservative checks on function names:
- Disallow expansions or quoting characters; these can only be called via
strange control characters
- Disallow '/'; these functions cannot be called anyway, as exec.c assumes
they are pathnames
- Make the CTL* bytes work properly in function names.
These are syntax errors.
POSIX does not require us to support more than names (letters, digits and
underscores, not starting with a digit), but I do not want to restrict it
that much at this time.
Exp-run done by: pav (with some other sh(1) changes)
This is how ksh93 treats ! within a pipeline and makes the ! in
a | ! b | c
negate the exit status of the pipeline, as if it were
a | { ! b | c; }
Side effect: something like
f() ! a
is now a syntax error, because a function definition takes a command,
not a pipeline.
Exp-run done by: pav (with some other sh(1) changes)
and why. The first case is correct usage which has but one correct output.
The 2nd and 3rd cases are incorrect usage in which the exact output is
not standardized and various shells give various allowable output.
immediately written into the stack after the call. Instead let the caller
manage the "space left".
Previously, growstackstr()'s assumption causes problems with STACKSTRNUL()
where we want to be able to turn a stack into a C string, and later
pretend the NUL is not there.
This fixes a bug in STACKSTRNUL() (that grew the stack) where:
1. STADJUST() called after a STACKSTRNUL() results in an improper adjust.
This can be seen in ${var%pattern} and ${var%%pattern} evaluation.
2. Memory leak in STPUTC() called after a STACKSTRNUL().
Reviewed by: jilles
A closing bracket immediately after '[=' should not be treated as special.
Different from the submitted patch, a string ending with '[=' does not cause
access beyond the terminating '\0'.
PR: bin/150384
Submitted by: Richard Lowe
MFC after: 2 weeks
to growing the filesystem.
Refuse to attach providers where the metadata provider size is
wrong. This makes post-boot attaches behave consistently with
pre-boot attaches. Also refuse to restore metadata to a provider
of the wrong size without the new -f switch. The new -f switch
forces the metadata restoration despite the provider size, and
updates the provider size in the restored metadata to the correct
value.
Helped by: pjd
Reviewed by: pjd
into un-zeroed storage.
The original patch was questioned by Kirk as it forces the filesystem
to do excessive work initialising inodes on first use, and was never
MFC'd. This change mimics the newfs(8) approach of zeroing two
blocks of inodes for each new cylinder group.
Reviewed by: mckusick
MFC after: 3 weeks
are too long. Filenames escaping this test are caught later on,
so the bug doesn't cause any breakage.
Document the correct ustar limitations in pax. As I have no access
to the IEEE 1003.2 spec, I can only assume that the limitations
imposed are in fact correct.
Add regression tests for the filename limitations imposed by pax.
MFC after: 3 weeks
This Almquist extension was disabled long ago.
In pathname generation, components starting with '!!' were treated as
containing wildcards, causing unnecessary readdir (which could fail, causing
pathname generation to fail while it should not).
POSIX does not allow constructs like:
if cmd; then fi
{ }
Add a colon dummy command, except in a test that verifies that such empty
lists do not cause crashes when used as a function definition.
In our implementation and most others, a break or continue in a dot script
can break or continue a loop outside the dot script. This should cause all
further commands in the dot script to be skipped. However, cmdloop() did not
know about this and continued to parse and execute commands from the dot
script.
As described in the man page, a return in a dot script in a function returns
from the function, not only from the dot script. There was a similar issue
as with break and continue. In various other shells, the return appears to
return from the dot script, but POSIX seems not very clear about this.
The buffer for generated pathnames could be too small in some cases. It
happened to be always at least PATH_MAX long, so there was never an overflow
if the resulting pathnames would be usable.
This bug may be abused if a script subjects input from an untrusted source
to pathname generation, which a bad idea anyhow. Most shell scripts do not
work on untrusted data. secteam@ says no advisory is necessary.
PR: bin/148733
Reported by: Changming Sun snnn119 at gmail com
MFC after: 10 days
This makes a difference if there is a command substitution.
To make this work, evalstring() has been changed to set exitstatus to 0 if
no command was executed (the string contained only whitespace).
Example:
eval $(false); echo $?
should print 0.
If an ; or & token was followed by an EOF token, pending here-documents were
left uninitialized. Execution would crash, either in the main shell process
for literal here-documents or in a child process for expanded
here-documents. In the latter case the problem is hard to detect apart from
the core dumps and log messages.
Side effect: slightly different retries on inputs where EOF is not
persistent.
Note that tools/regression/bin/sh/parser/heredoc6.0 still causes a similar
crash in a child process. The text passed to eval is malformed and should be
rejected.
test of newsyslog, as they were mainly made to test 'newsyslog -t',
but they do test the basic functionality.
The test 'framework' was based on dds@'s code in
src/tools/regression/bin/mv/.
Note that currently these tests are not fully correct for the
non-timestamp based rotation case, as it seems like newsyslog actually
by default keeps a file too much around.
MFC after: 3 weeks
expansion.
The comma operator is not listed in POSIX.1-2008 XCU 1.1.2.1 Arithmetic
Precision and Operations (referenced by XCU 2.6.4 Arithmetic Expansion) and
is therefore not required.
Example (in interactive mode):
cat <<EOF && )
The next command typed caused sh to segfault, because the state for the here
document was not reset.
Like parser_temp, this uses the fact that the parser is not re-entered.
If a command substitution contains a newline token, this no longer starts
here documents of outer commands. This way, we follow POSIX's idea of the
command substitution being a separate script more closely. It also matches
other shells better and is consistent with newline characters in quotes not
starting here documents.
The extension tested in parser/heredoc3.0 ($(cat <<EOF)\ntext\nEOF\n)
continues to be supported.
In particular, this change allows things like
cat <<EOF && echo `pwd`
(a `` command substitution after a here document)
which formerly silently used an empty file as the here document, because the
EOF of the inner command "pwd" also forced an empty here document.
Although "--" historically has not been required to be recognized for
certain special builtins that do not take options in POSIX, some other
implementations recognize options for them, requiring scripts to use "--" or
avoid operands starting with "-".
Operands starting with "-" can be avoided with eval by prepending a space,
and cannot occur with break, continue, exit, return and shift as they only
take numbers, nor with times as it does not take operands. With . and exec,
avoiding "-" is not so easy as it may require reimplementing the PATH
search; therefore the current proposal for POSIX is to require recognition
of "--" for them.
We continue to accept other strings starting with "-" as operands to . and
exec, and also "--" if it is alone to . (which would otherwise be invalid
anyway).
improperly from one of two instances of close(2) being called
simultaneously on both ends of a connected UNIX domain socket. The test
tool is slightly tweaked to improve failure modes, and while often does
trigger the problem, doesn't do so consistently due to the nature of the
race.
PR: kern/144061
Submitted by: Mikolaj Golub <to.my.trociny@gmail.com>
MFC after: 3 days
These are git commits 36f0fa8fcbc8c7b2b194addd29100fb40e73e4e9 and
d6d06ff5c2ea0fa44becc5ef4340e5f2f15073e4 in dash.
Because this is the first code I'm importing from dash to expand.c, add the
Herbert Xu copyright notice which is in dash's expand.c.
When pathname expanding *\/, the CTLESC representing the quoted state was
erroneously taken as part of the * pathname component. This CTLESC was then
seen by the pattern matching code as escaping the '\0' terminating the
string.
The code is slightly different because dash converts the CTLESC characters
to backslashes and removes all the other CTL* characters to allow
substituting glob(3).
The effect of the bug was also slightly different from dash (where nothing
matched at all). Because a CTLESC can escape a '\0' in some way, whether
files were included despite the bug depended on memory that should not be
read. In particular, on many machines /*\/ expanded to a strict subset of
what /*/ expanded to.
Example:
echo /*"/null"
This should print /dev/null, not /*/null.
PR: bin/146378
Obtained from: dash
case1.0 tests POSIX requirements and one more for keywords in case
statements. The others test very special cases of command substitution.
These also work on stable/8.
This allows doing things like LC_ALL=C some_builtin to run a builtin under a
different locale, just like is possible with external programs. The
immediate reason is that this allows making printf(1) a builtin without
breaking things like LC_NUMERIC=C printf '%f\n' 1.2
This change also affects special builtins, as even though the assignment is
persistent, the export is only to the builtin (unless the variable was
already exported).
Note: for this to work for builtins that also exist as external programs
such as /bin/test, the setlocale() call must be under #ifndef SHELL. The
shell will do the setlocale() calls which may not agree with the environment
variables.
Unset PWD if it is incorrect and no value for it can be determined.
This preserves the logical current directory across shell invocations.
Example (assuming /home is a symlink):
$ cd
$ pwd
/home/foo
$ sh
$ pwd
/home/foo
Formerly the second pwd would show the physical path (symlinks resolved).
Current versions pass this test trivially by never importing PWD, but I plan
to change sh to import PWD if it is an absolute pathname for the current
directory, possibly containing symlinks.
This applies to word in ${v-word}, ${v+word}, ${v=word}, ${v?word} (which
inherits quoting from the outside) and in ${v%word}, ${v%%word}, ${v#word},
${v##word} (which does not inherit any quoting).
In all cases tilde expansion is only attempted at the start of word, even if
word contains spaces. This agrees with POSIX and other shells.
This is the last part of the patch tested in the exp-run.
Exp-run done by: erwin (with some other sh(1) changes)
Note that this depends on r206145 for allowing pattern match characters to
have their special meaning inside a double-quoted expansion like "${v%pat}".
PR: bin/117748
Exp-run done by: erwin (with some other sh(1) changes)
* remove the backslash from \} inside double quotes inside +-=?
substitutions, e.g. "${$+\}a}"
* maintain separate double-quote state for ${v#...} and ${v%...};
single and double quotes are special inside, even in a double-quoted
string or here document
* keep track of correct order of substitutions and arithmetic
This is different from dash's approach, which does not track individual
double quotes in the parser, trying to fix this up during expansion.
This treats single quotes inside "${v#...}" incorrectly, however.
This is similar to NetBSD's approach (as submitted in PR bin/57554), but
recognizes the difference between +-=? and #% substitutions hinted at in
POSIX and is more refined for arithmetic expansion and here documents.
PR: bin/57554
Exp-run done by: erwin (with some other sh(1) changes)
Redirection errors on subshells already did not abort the shell because
the redirection is executed in the subshell.
Other shells seem to agree that these redirection errors should not abort
the shell.
Also ensure that the redirections will be cleaned up properly in cases like
command eval '{ shift x; } 2>/dev/null'
Example:
{ echo bad; } </var/empty/x; echo good
