r272057:
Import pjdfstest from ^/vendor/pjdfstest/abf03c3a47745d4521b0e4aa141317553ca48f91
- Remove tools/regression/pjdfstest
- Add upgrade directions for contrib/pjdfstest
- Add a note to UPDATING for the move (the reachover Makefiles are coming
soon)
Functional differences:
- ftruncate testcases are added from upstream (github)
Non-functional differences:
- The copyright for the project has been updated to 2012
- pjd's contact information has been updated
Discussed with: -testing, jmmv, pjd
Sponsored by: EMC / Isilon Storage Division
r272083:
Expect ELOOP on Darwin/Linux with "O_NOFOLLOW was specified and the target is a
symbolic link" case. Assume EMLINK on the rest of the OSes (FreeBSD, Solaris,
etc)
Sponsored by: EMC / Isilon Storage Division
r272084:
Fix the executed testplan count
Sponsored by: EMC / Isilon Storage Division
r272087:
Increase the memory disk size in the following testcases to avoid mount
failures, which would cause cascade failures in the rest of the test
run:
link/15.t, open/19.t, mkdir/11.t, mkfifo/11.t, symlink/11.t
Fail quickly in all of the testcases if mdconfig, mount, umount, etc
fails to avoid issues similar to this in the future
Submitted by: Casey Peel <cpeel@isilon.com>
Sponsored by: EMC / Isilon Storage Division
r274016:
Integrate pjdfstest test suite execution into kyua
pjdfstest execution is opt-in and must be done as root due to some of the
assumptions made by the test suite and lack of error checking in the non-root
case
A description of how to execute pjdfstest with kyua is provided in
share/pjdfstest/README
Phabric: D824 (an earlier prototype patch)
Relnotes: yes
Sponsored by: EMC / Isilon Storage Division
------------------------------------------------------------------------
r274792 | n_hibma | 2014-11-21 15:53:42 +0100 (Fri, 21 Nov 2014) | 5
lines
Simply remove the tmp dir before creating the symlink. We are doing
chroots all over the place, so there is bound to be a stale file lying
around in there (in my case samba lock files from creating accounts). If
we don't do that, the symlink later will fail.
------------------------------------------------------------------------
Note: didn't merge r274331 removing gif/faith on purpose.
r268246 | mr | use mkimg and build into separate directories
r269355 | imp | Fix typo in example script
r269362 | imp | use rm -x on 10 and newer
r269363 | imp | NANO_OBJ shouldn't end with '/'
r269423 | imp | -K to suppress installkernel
r269424 | imp | sort usage
r269425 | imp | sort switch
r269983 | imp | only install bootloader if it exists
r269984 | imp | create_diskimage since it never was $ARCH dependent
r270162 | imp | Add support for -X which instales cross native tools
r273627:
- Print out "Bail out!" in die(..) so prove terminates immediately
- Handle the output from newer versions of openssl md5, similar to what
pjd@ did in r248304
Sponsored by: EMC / Isilon Storage Division
r273628:
Move the redirection to stderr out of the cmd variable assignment
Putting 2>/dev/null in cmd= escapes the redirection operation, which causes
mdconfig to think it's a filename
Sponsored by: EMC / Isilon Storage Division
Remove an extra copy of hv_kvp_daemon(8) [1].
While I'm there also correct typos in OptionalObsoleteFiles and add
information of the command line options for hv_kvp_daemon(8).
Reported by: jmg [1]
Reviewed by: jmg
Add a new option, -P, to pkt-gen which reads a single packet from a stored
pcap file and transmits it instead of the default UDP packet.
Reviewed by: luigi
Expand the tests structure in test_small(..) to workaround the
"initializer not constant" warning with gcc
Approved by: jmmv (mentor)
Phabric: D744
Sponsored by: EMC / Isilon Storage Division
Complete the usr.bin/yacc kyua integration work I originally
submitted via r268811
- Install the Kyuafile by adding FILES to FILESGROUPS
- Run the testcases with an unprivileged user
Some of the testcases depend upon behavior that's broken when
run as root on FreeBSD because of how permissions are treated
with access(2) vs eaccess(2), open(2), etc
- Simplify the test driver to just inspect the exit code from
run_test because it now exits with 0 if successful and exits
with !0 if unsuccessful
- Don't do ad hoc temporary directory creation/deletion; let Kyua
handle that
- Add entries for files removed in r268811 to
OptionalObsoleteFiles.inc
PR: 191020
X-MFC with: r268811
Approved by: jmmv (mentor)
Reviewed by: bapt
Sponsored by: EMC / Isilon Storage Division
Import HyperV Key-Value Pair (KVP) driver and daemon code by Microsoft,
many thanks for their continued support of FreeBSD.
While I'm there, also implement a new build knob, WITHOUT_HYPERV to
disable building and installing of the HyperV utilities when necessary.
The HyperV utilities are only built for i386 and amd64 targets.
Approved by: re (gjb)
Though this passes the buildworld test, this fails during
installworld with:
make[3]: "/releng/scripts-release/chroots/10/i386/release/etc/devd/Makefile"
line 13: Malformed conditional (${MK_HYPERV} != "no")
Approved by: re (implicit)
Sponsored by: The FreeBSD Foundation
Import HyperV Key-Value Pair (KVP) driver and daemon code by Microsoft,
many thanks for their continued support of FreeBSD.
While I'm there, also implement a new build knob, WITHOUT_HYPERV to
disable building and installing of the HyperV utilities when necessary.
The HyperV utilities are only built for i386 and amd64 targets.
Approved by: re (gjb)
Phabric: https://reviews.freebsd.org/D706
Approved by: rpaulo (mentor)
Approved by: re (gjb)
Reviewed by: jmmv
Sponsored by: EMC / Isilon Storage Division
r267176:
Add the *_TESTS_SH_SED_* functionality to atf.test.mk.
This exists already in plain.test.mk and tap.test.mk and should have been
added to atf.test.mk too when the feature was first introduced.
(It is probably time to address the related TODOs but I will do that
separately.)
r267181:
Move atf-sh from /usr/bin/ to /usr/libexec/
In r266650, we made libatf-c and libatf-c++ private libraries so that no
components outside of the source tree could unintendedly depend on them.
This change does the same for the "atf-sh library" by moving the atf-sh
interpreter from its public location in /usr/bin/ to the private location
in /usr/libexec/. Our build system will ensure that our own test programs
use the right binary, but users won't be able to depend on atf-sh by
"mistake".
Committing this now to ride the UPDATING notice added with r267172 today.
r268445:
Fix atf-sh's integration_test
With the move of atf-sh into /usr/libexec in r267181, some of the
tests in the integration_test program broke because they could not
execute atf-sh from the path any longer.
This slipped through because I do have a local atf installation in
my home directory that appears in my path, hence the tests could
still execute my own version.
Fix this by forcing /usr/libexec to appear at the beginning of the
path when attempting to execute atf-sh.
To make upgrading easy (and to avoid an unnecessary entry in UPDATING),
make integration_test depend on the Makefile so that a rebuild of the
shell script is triggered. This requires a hack in the *.test.mk files
to ensure the Makefile is not treated as a source to the generated
program. Ugly, I know, but I don't have a better way of doing this at
the moment. Will think of one once I address the TODO in the *.test.mk
files that suggests generalizing the file generation functionality.
PR: 191052
Reviewed by: Garrett Cooper
MFC r270653: Update man-pages to correctly refer to changed pathes and namin
MFC r270657: More man pages that need to know about vt in addition to syscon
MFC r270659: (by pluknet@) Missed comma.
MFC r270660: Back-out the references to vt(4) from this man-page. It appears
MFC r270933: Add references to vt(4) to further man-pages.
MFC r270934: Final patches to the tools used to convert syscons keymaps for
MFC r270935: Add vt(4) support to the console initialisation script, specifi
Second batch of MFCs to add support for Unicode keymaps for use with vt(4).
It contains the following changes:
- Add references to vt(4) to relevant man-pages.
- Update comment in defaults/rc.conf to mention vt
- Update rc.d/syscons to warn about syscons keymaps used under vt.
An attempt is made to identify the vt keymap to load instead.
- Minor changes to the conversion tool based on mail comments on keymaps.
Relnotes: yes
r266650:
Change libatf-c and libatf-c++ to be private libraries.
We should not be leaking these interfaces to the outside world given
that it's much easier for third-party components to use the devel/atf
package from ports.
As a side-effect, we can also drop the ATF pkgconfig and aclocal files
from the base system. Nothing in the base system needs these, and it
was quite ugly to have to get them installed only so that a few ports
could build. The offending ports have been fixed to depend on
devel/atf explicitly.
Reviewed by: bapt
r267172:
Homogenize libatf-* version numbers with upstream.
The libatf-* major version numbers in FreeBSD were one version ahead of
upstream because, when atf was first imported into FreeBSD, the upstream
numbers were not respected. This is just confusing and bound to cause
problems down the road.
Fix this by taking advantage of the fact that libatf-* are now private
and that atf is not yet built by default. However, and unfortunately, a
clean build is needed for tests to continue working once "make
delete-old-libs" has been run; hence the note in UPDATING.
Phabric: D701
Approved by: jmmv (maintainer, mentor)
r269906:
Add missing BSD.tests.dist entry for lib/libutil to unbreak installworld with
MK_TESTS == no
Phabric: D555
Approved by: jmmv (mentor, implicit)
Pointyhat to: ngie
r269904:
Integrate lib/libutil into the build/kyua
Remove the .t wrappers
Rename all of the TAP test applications from test-<test> to
<test>_test to match the convention described in the TestSuite
wiki page
humanize_number_test.c:
- Fix -Wformat warnings with counter variables
- Fix minor style(9) issues:
-- Header sorting
-- Variable declaration alignment/sorting in main(..)
-- Fit the lines in <80 columns
- Fix an off by one index error in the testcase output [*]
- Remove unnecessary `extern char * optarg;` (this is already provided by
unistd.h)
Phabric: D555
Approved by: jmmv (mentor)
Obtained from: EMC / Isilon Storage Division [*]
Submitted by: Casey Peel <cpeel@isilon.com> [*]
Sponsored by: EMC / Isilon Storage Division
Add converter from SYSCONS keymap format to NEWCONS and
configuration files. The convert-keymap.pl script can
be used to convert private SYSCONS keymaps ro NEWCONS
format.
Integrate lib/libmp into the build/kyua
- Remove the .t wrapper
- Fix -Wreturn-type warnings with clang
This change has been tested on amd64/i386
Phabric: D530
Reviewed by: jmmv
Approved by: jmmv (co--mentor)
MFC after: 2 weeks
Sponsored by: EMC / Isilon Storage Division
MFC note: src.opts.mk in the original commit was changed to
bsd.own.mk.
The test locale1.0 depends on locale support; it is meaningless without a
working LC_MESSAGES.
I added an OptionalObsoleteFiles.inc entry.
PR: 181151
Submitted by: Garrett Cooper (original version)
Sponsored by: EMC / Isilon Storage Division
r267011: Make height and width optional arguments
Now defaults to a 16x8 font size. The height and width can be specified
using -h and -w respectively.
r267012: Make the bold font optional
r267035: Use a hash to speed up glyph deduplication
Walking a linked list of all glyphs to look for a duplicate is very slow
for large fonts (e.g., for CJK character sets). In my test the runtime
for a sample 40000 character font went from just over 80 seconds on
average to just over 2 seconds.
r267119: -w sets the width, not height
r267123: Support "GNU Unifont" format font data
The GNU Unifont .hex format is a text file. Each line represents one
glyph and consists of a four-digit hex code point, a colon, and pairs of
hex digits representing the bitmap. By default an 8x16 font is assumed,
with 16x16 double-width glyphs, resulting in either 32 or 64 hex digits
for the bitmap.
Our version of the file format supports comments at the top of the file
to set the height and width:
Each row of bitmap data is rounded up to byte width - for example, a
10-pixel wide font uses 4 characters per row.
See http://czyborra.com/unifont/ for more background on the original
format.
r267126: Accept space after BITMAP in .bdf parser
The Unifont BDF generator incorrectly adds a space after BITMAP, and
and that error has been widely propagated.
r267173: use -h height and -w width args
r267298: Hide stats by default and improve error handling
The font stats are interesting, but rather verbose.
r267301: Speed up bold glyph map deduplication
Perform an O(n) deduplication pass over the bold maps at the end, rather
than walking the normal map list to look for a duplicate glyph each time
a bold mapping entry is added.
r267324: handle failure writing output font
r267337: move to usr.bin/vtfontcvt
vtfontcvt is useful for end users to convert arbitrary bitmap fonts
for use by vt(4). It can also be used as a build tool, allowing us
to keep the source font data in the src tree rather than uuencoded
binaries.
Reviewed by: ray, wblock (D183)
r267366: Avoid leaking file pointer on error
CID: 1222506, 1222505
r268022: Rename the WITHOUT_VT_SUPPORT knob to WITHOUT_VT
The _SUPPORT knobs have a consistent meaning which differs from the
behaviour controlled by this knob. As the knob is opt-out and has not
appeared in a release the impact should be low.
r268172: correct width calculation (.hex files and commandline)
r268948: Use the standard way of printing the usage string
r268949: Remove redundant return statement after errx
Also update vtfontcvt(8), based on inclusion in FreeBSD 10.1
Sponsored by: The FreeBSD Foundation
Avoid hardcoding "gcc" in the DTrace tests.
At least one test doesn't work yet without gcc, however gcc is
not always available in base. Using the environment compiler
is more trustable and will also work with an external compiler.
Reviewed by: markj
The _SUPPORT knobs have a consistent meaning which differs from the
behaviour controlled by this knob. As the knob is opt-out and has not
appeared in a release the impact should be low.
Don't install GSS-API headers when the GSSAPI option has been disabled.
Some ports assume GSS-API is supported when they find the headers.
PR: 189156
Submitted by: Garrett Cooper <yanegomi@gmail.com>
(NANO_CONFIG): New variable containing path of config file, so that
the configuration can reference additional files relative to its own
location.
(NANO_MODULES): If set to "default", install all built modules.
Reviewed by: imp
r263189,r263190,r263192,r263193,r263287,r263288,r263890,r264281,
r264655,r264656,r264856,r264857,r264858,r264859,r264860,r264861,
r264891,r264892,r264909
Catch up on all the referenced changes in -current, in brief:
r258705 | n_hibma | Use NANO_PMAKE for build, but not install
r258709 | mr | pkgng goo + bootstrap
r263140 | glebius | Axe IPX.
r263184 | imp | Fix build with spaces in names.
r263185 | imp | Make pcengines config files compile again.
r263186 | imp | Use UFS2 by default, but allow fallback to UFS1
r263187 | imp | Print an error message when we exit out early.
r263188 | imp | Sometimes only copy MBR when backing via swap
r263189 | imp | Update save_cfg
r263190 | imp | Be more explicit about setting SRCCONF to /dev/null
r263192 | imp | Rely on default UFS type
r263193 | imp | Remove TARGET_BIG_ENDIAN. It's no longer relevant.
r263287 | bdrewery | pkg(8) has no limits
r263288 | bdrewery | Remove comment meant for removal in r263287
r263890 | imp | Up default media size to 1GB.
r264281 | imp | Ignore .hg and .git files
r264655 | imp | rm -x for safety
r264656 | imp | new example: dhcpd derived from FreeNAS/BSDRP
r264856 | imp | Override the parallel make target to use all CPUs.
r264857 | imp | No need for true here, remove it.
r264858 | imp | NANO_PKG_META_BASE
r264859 | imp | stylize umount hack
r264860 | imp | switch dhcpd to pkg(8).
r264861 | imp | CR and CR0 added from dhcpd
r264891 | imp | Try to alwaays use () for functions
r264892 | imp | bash whines about r264857, revert
r264909 | imp | Move back to {} for functions that need global effects
- r263220 Migrate tools/regression/sbin/ to the new tests layout.
- r263222 Add Makefile missed in r263220.
- r263226 Migrate tools/regression/{usr.bin/lastcomm,usr.sbin}/ to the new tests layout.
- r263227 Migrate most of tools/regression/usr.bin/ to the new tests layout.
- r263345 Expand tabs that sneaked in into spaces.
- r263346 Migrate tools/regression/usr.bin/make/ to the new tests layout.
- r263348 Add Makefiles missed in r263346.
- r263351 Migrate tools/regression/usr.bin/pkill/ to the new tests layout.
- r263388 Mark multi_test as requiring /usr/share/dict/words.
- r263814 Fix path to the run.pl script to let these tests run.
- r264742 Prevent building tests when bootstrapping make.
This is 'make tinderbox' clean.
- r258014 Document WITH_TESTS src.conf(5) option.
- r263089 Fix description of WITHOUT_BMAKE's purpose.
- r264408 Fix test suite name in src.conf(5).
- r264410 Document how to install the test suite.
- r264412 Add FreeBSD 10.1 to the list of recognized releases for Fx.
- r264413 Miscellaneous fixes to tests(7).
- r262953 Fix m4 tests so that they run cleanly with prove.
- r262954 Fix printf tests so that they run cleanly with prove.
- r262959 Fix sed tests so that they run cleanly with prove.
- r262960 Fix yacc tests so that they run cleanly with prove.
- r262961 Fix pkill tests so that they run cleanly with prove.
- r262962 Fix ncal tests so that they run cleanly with prove.
- r263081 Fix lastcomm tests under amd64.
- r263082 Only run the make tests when make is fmake.
- r263083 Fix sa tests.
- r263084 Turn a test precondition into a skip in the mdconfig tests.
- r263085 Make the strerror tests work without libtap.
- r263087 Remove broken tests for eui64_line.
- r263221 Change etcupdate tests to return 1 on test failures.
- r263352 Make the priv test program exit with non-zero if any failures are detected.
- r263353 errx prepends the program name to the message; don't do it by hand.
- r263362 Include strings.h so that bpf_filter.c can be built in userland.
Upgrade our copy of llvm/clang to 3.4 release. This version supports
all of the features in the current working draft of the upcoming C++
standard, provisionally named C++1y.
The code generator's performance is greatly increased, and the loop
auto-vectorizer is now enabled at -Os and -O2 in addition to -O3. The
PowerPC backend has made several major improvements to code generation
quality and compile time, and the X86, SPARC, ARM32, Aarch64 and SystemZ
backends have all seen major feature work.
Release notes for llvm and clang can be found here:
<http://llvm.org/releases/3.4/docs/ReleaseNotes.html>
<http://llvm.org/releases/3.4/tools/clang/docs/ReleaseNotes.html>
MFC 262121 (by emaste):
Update lldb for clang/llvm 3.4 import
This commit largely restores the lldb source to the upstream r196259
snapshot with the addition of threaded inferior support and a few bug
fixes.
Specific upstream lldb revisions restored include:
SVN git
181387 779e6ac
181703 7bef4e2
182099 b31044e
182650 f2dcf35
182683 0d91b80
183862 15c1774
183929 99447a6
184177 0b2934b
184948 4dc3761
184954 007e7bc
186990 eebd175
Sponsored by: DARPA, AFRL
MFC 262186 (by emaste):
Fix mismerge in r262121
A break statement was lost in the merge. The error had no functional
impact, but restore it to reduce the diff against upstream.
MFC 262303:
Pull in r197521 from upstream clang trunk (by rdivacky):
Use the integrated assembler by default on FreeBSD/ppc and ppc64.
Requested by: jhibbits
MFC 262611:
Pull in r196874 from upstream llvm trunk:
Fix a crash that occurs when PWD is invalid.
MCJIT needs to be able to run in hostile environments, even when PWD
is invalid. There's no need to crash MCJIT in this case.
The obvious fix is to simply leave MCContext's CompilationDir empty
when PWD can't be determined. This way, MCJIT clients,
and other clients that link with LLVM don't need a valid working directory.
If we do want to guarantee valid CompilationDir, that should be done
only for clients of getCompilationDir(). This is as simple as checking
for an empty string.
The only current use of getCompilationDir is EmitGenDwarfInfo, which
won't conceivably run with an invalid working dir. However, in the
purely hypothetically and untestable case that this happens, the
AT_comp_dir will be omitted from the compilation_unit DIE.
This should help fix assertions occurring with ports-mgmt/tinderbox,
when it is using jails, and sometimes invalidates clang's current
working directory.
Reported by: decke
MFC 262809:
Pull in r203007 from upstream clang trunk:
Don't produce an alias between destructors with different calling conventions.
Fixes pr19007.
(Please note that is an LLVM PR identifier, not a FreeBSD one.)
This should fix Firefox and/or libxul crashes (due to problems with
regparm/stdcall calling conventions) on i386.
Reported by: multiple users on freebsd-current
PR: bin/187103
MFC 263048:
Repair recognition of "CC" as an alias for the C++ compiler, since it
was silently broken by upstream for a Windows-specific use-case.
Apparently some versions of CMake still rely on this archaic feature...
Reported by: rakuco
MFC 263049:
Garbage collect the old way of adding the libstdc++ include directories
in clang's InitHeaderSearch.cpp. This has been superseded by David
Chisnall's commit in r255321.
Moreover, if libc++ is used, the libstdc++ include directories should
not be in the search path at all. These directories are now only used
if you pass -stdlib=libstdc++.
This is a MFC of all the commits listed below.
My original goal of this change was to only merge the move of the tests
from tools/regression/bin/ into the new layout (which include tests for
sh(1) and other tools as well). However, doing so is tricky due to the
ongoing work in sh(1) and, especially, the many changes to its tests
since stable/10 was first branched.
Merging everything is the simplest way to achieve this goal and, as a
bonus point, we get various fixes and miscellaneous improvements into
the branch.
Per jilles' suggestion, I'm avoiding the merge of a couple of changes
(r256850 and r257506) that required depending kernel changes. I'm also
avoiding very recent changes that have not had a long enough time to be
validated in current.
This is "make tinderbox" clean.
r256735 sh: Remove one syscall when waiting for a foreground job.
r257399 sh: Allow trapping SIGINT/SIGQUIT after ignore because of '&'.
r257504 sh: Reorder union node to reduce its size on 64-bit platforms.
r257920 sh: Add a test case for would-be assignments that are not due to quoting.
r257929 sh: Properly quote alias output from command -v.
r258489 sh: Add tests for the </dev/null implicit in a background command.
r258533 sh: Add more tests for the </dev/null implicit in a background command.
r258535 sh: Make <&0 disable the </dev/null implicit in a background command.
r258776 sh: Prefer memcpy() to strcpy() in most cases. Remove the scopy macro.
r259047 sh: Split set -x output into a separate function.
r259210 Migrate tools/regression/bin/ tests to the new layout.
r259844 sh: Remove an unused variable.
r259846 sh: Initialize OPTIND=1 even if it came from the environment.
r259874 sh: Simplify code related to PPID variable.
r259946 sh: Don't check input for non-whitespace if history is disabled.
r260246 sh(1): Discourage use of -e.
r260506 Run the sh(1) and test(1) tests as unprivileged.
r260586 Mark the bin/pax tests as requiring perl.
r260634 Use TAP_TESTS_PERL to register the legacy_test in bin/pax.
r260635 Replace hand-crafted Kyuafiles with automatic generation.
r260654 sh: Remove SIGWINCH handler and just check for resize before every read.
r261121 sh: Add test for nested alias.
r261125 sh: Solve the alias recursion problem in a less hackish way.
r261141 sh: Do not depend on parse/execute split in new alias test.
r261160 sh: Add tests for alias names after another alias.
r261192 sh: Allow aliases to force alias substitution on the following word.
r262533 sh: Make expari() static.
r262565 sh: Do not corrupt internal representation if LINENO inner expansion fails.
r262697 sh: Simplify expari().
Reviewed by: jilles
