Commit Graph

38 Commits

Author SHA1 Message Date
Eivind Eklund
1d5e9e2255 Make INET a proper option.
This will not make any of object files that LINT create change; there
might be differences with INET disabled, but hardly anything compiled
before without INET anyway.  Now the 'obvious' things will give a
proper error if compiled without inet - ipx_ip, ipfw, tcp_debug.  The
only thing that _should_ work (but can't be made to compile reasonably
easily) is sppp :-(

This commit move struct arpcom from <netinet/if_ether.h> to
<net/if_arp.h>.
1998-01-08 23:42:31 +00:00
Eivind Eklund
430df5f4b7 Throw options IPX, IPXIP and IPTUNNEL into opt_ipx.h.
The #ifdef IPXIP in netipx/ipx_if.h is OK (used from ipx_usrreq.c and
ifconfig.c only).

I also fixed a typo IPXTUNNEL -> IPTUNNEL (and #ifdef'ed out the code
inside, as it never could have compiled - doh.)
1997-12-15 20:31:25 +00:00
Nate Williams
133c8c2f49 - Renamed <pccard/card.h> -> <pccard/cardinfo.h>.
Forgotten by:		me
Reminded by:		Bruce
1997-11-20 15:48:41 +00:00
Poul-Henning Kamp
4a11ca4e29 Remove a bunch of variables which were unused both in GENERIC and LINT.
Found by:	-Wunused
1997-11-07 08:53:44 +00:00
Nate Williams
be8e398409 - Make sure we include <sys/kernel.h> to pick up the definitions of DATA_SET()
Noticed by:	bde
1997-10-29 15:54:19 +00:00
Nate Williams
075a76a29e - Instead of relying on a functional call to register PCARD-capable drivers,
use a Linker Set.  Note, if a driver is loaded as an LKM  if will have
  to use the function call, but since none of the existing drivers
  are loadable, this made things cleaner and boot messages nicer.

Obtained from:	PAO-970616
1997-10-26 21:08:42 +00:00
Nate Williams
8bb7a8fc95 - Functional changes to PCCARD support.
* Kill individual drivers 'suspend' routines, since there's no simple/safe
   way to suspend/resume a card w/out going through the complete probe
   at initialization time.
 * Default to using the apm_pccard_resume sysctl code, which basically
   pretends the card was removed, and then re-inserted.  Suspend/resume
   is now 'emulated' with a fake insert/removal.  (Hence we no longer
   need the driver-specific suspend routines.)
1997-10-26 04:54:16 +00:00
Nate Williams
e7e437dbfa - Do a bunch of gratuitous changes intended to make the code easier to
follow.
 * Rename/reorder all of the pccard structures, change many of the member
   names to be descriptive, and follow more closely other 'bus' drivers
   naming schemes.
 * Rename a bunch of parameter and local variable names to be more
   consistant in the code.
 * Renamed the PCCARD 'crd' device to be the 'card' device
 * KNF and make the code consistant where it was obvious.
 * ifdef'd out some unused code
1997-10-26 04:36:24 +00:00
Bruce Evans
f71d35e402 Removed unused #includes. 1997-07-20 14:10:18 +00:00
Bruce Evans
51a534883a Don't include <sys/ioctl.h> in the kernel. Stage 2: include
<sys/sockio.h> instead of <sys/ioctl.h> in network files.
1997-03-24 11:33:46 +00:00
Peter Wemm
6875d25465 Back out part 1 of the MCFH that changed $Id$ to $FreeBSD$. We are not
ready for it yet.
1997-02-22 09:48:43 +00:00
Garrett Wollman
6a4c899092 Put newlines after log messages.
Submitted by:	seki@sysrap.cs.fujitsu.co.jp PR#2563 (but the patch didn't
		apply)
1997-01-23 16:17:09 +00:00
Garrett Wollman
e7d4c83b3f Update from driver author. Closes PR#2421.
Submitted by:	 seki@sysrap.cs.fujitsu.co.jp
1997-01-14 18:24:59 +00:00
Jordan K. Hubbard
1130b656e5 Make the long-awaited change from $Id$ to $FreeBSD$
This will make a number of things easier in the future, as well as (finally!)
avoiding the Id-smashing problem which has plagued developers for so long.

Boy, I'm glad we're not using sup anymore.  This update would have been
insane otherwise.
1997-01-14 07:20:47 +00:00
Garrett Wollman
477180fbc8 Use the new if_multiaddrs list for multicast addresses rather than the
previous hackery involving struct in_ifaddr and arpcom.  Get rid of the
abominable multi_kludge.  Update all network interfaces to use the
new machanism.  Distressingly few Ethernet drivers program the multicast
filter properly (assuming the hardware has one, which it usually does).
1997-01-13 21:26:53 +00:00
Garrett Wollman
59562606b9 Convert the interface address and IP interface address structures
to TAILQs.  Fix places which referenced these for no good reason
that I can see (the references remain, but were fixed to compile
again; they are still questionable).
1996-12-13 21:29:07 +00:00
Garrett Wollman
d4e29514fc Patches from driver author in PR#2010.
Submitter requests that this patch be merged into 2.2.

Submitted by:	seki@sysrap.cs.fujitsu.co.jp
1996-11-15 16:15:56 +00:00
Garrett Wollman
545c48b83a Fix padding of short packets (PR#1701).
Submitted by: seki@sysrap.cs.fujitsu.co.jp
1996-10-07 17:50:00 +00:00
Poul-Henning Kamp
40f3771f7f Various cleanups for remanents of devconf. 1996-09-08 10:44:18 +00:00
Poul-Henning Kamp
bfbb029d87 Remove devconf, it never grew up to be of any use. 1996-09-06 23:09:20 +00:00
Poul-Henning Kamp
26a8b0bf7e Megacommit to straigthen out ETHER_ mess.
I'm pretty convinced after looking at this that the majority of our
drivers are confused about the in/exclusion of ETHER_CRC_LEN :-(
1996-08-06 21:14:36 +00:00
Bruce Evans
9b2b0822b7 Removed unused #includes of <i386/isa/icu.h> and <i386/isa/icu.h>. icu.h
is only used by the icu support modules and by a few drivers that know
too much about the icu (most only use it to convert `n' to `IRQn').  isa.h
is only used by ioconf.c and by a few drivers that know too much about
isa addresses (a few have to, because config is deficient).
1996-06-18 01:22:40 +00:00
Gary Palmer
c23670e294 Clean up -Wunused warnings.
Reviewed by:		bde
1996-06-12 05:11:41 +00:00
Nate Williams
e12ac36c96 Format the already applied PCCARD additions to use KNF form. No
functional changes.
1996-04-23 18:36:56 +00:00
Bruce Evans
5670f8fbd7 Changed #includes of <i386/include/foo.h> to #includes of <machine/foo.h>. 1996-04-07 17:50:10 +00:00
Jordan K. Hubbard
2dbb98e0af This is a revised fe, Ethernet driver for MB8696x based adapters. 1996-03-17 08:36:38 +00:00
Garrett Wollman
9b44ff2214 Clean up Ethernet drivers:
- fill in and use ifp->if_softc
	- use if_bpf rather than private cookie variables
	- change bpf interface to take advantage of this
	- call ether_ifattach() directly from Ethernet drivers
	- delete kludge in if_attach() that did this indirectly
1996-02-06 18:51:28 +00:00
Mike Pritchard
6c5e9bbdf5 Fix a bunch of spelling errors in the comment fields of
a bunch of system include files.
1996-01-30 23:02:38 +00:00
Poul-Henning Kamp
18b7be4064 The last part of the ether_sprint -> %6D change.
Sorry for the delay.
(%D is for hexdumping.)
1996-01-26 09:29:29 +00:00
Bruce Evans
0dfe10a65c Completed function declarations and/or added prototypes and/or added
#includes to get prototypes.
1995-12-15 00:54:32 +00:00
Poul-Henning Kamp
6f4e0beb7e Staticize and cleanup. 1995-12-10 13:40:44 +00:00
David Greenman
4a5f1499b0 all:
Removed ifnet.if_init and ifnet.if_reset as they are generally unused.
Change the parameter passed to if_watchdog to be a ifnet * rather than
a unit number. All of this is an attempt to move toward not needing an
array of softc pointers (which is usually static in size) to point to
the driver softc.

if_ed.c:
Changed some of the argument passing to some functions to make a little
more sense.

if_ep.c, if_vx.c:
Killed completely bogus use of if_timer. It was being set in such a way
that the interface was being reset once per second (blech!).
1995-12-05 02:01:59 +00:00
Bruce Evans
4ff3de8e80 Added `#include "ioconf.h"' to <machine/conf.h> and cleaned up the
misplaced extern declarations (mostly prototypes of interrupt handlers)
that this exposed.  The prototypes should be moved back to the driver
sources when the functions are staticalized.

Added idempotency guards to <machine/conf.h>.  "ioconf.h" can't be
included when building LKMs so define a wart in bsd.kmod.mk to help
guard against including it.
1995-11-04 17:08:13 +00:00
Julian Elischer
cc6a66f20e Reviewed by: julian and jhay@mikom.csir.co.za
Submitted by:	Mike Mitchell, supervisor@alb.asctmd.com

This is a bulk mport of Mike's IPX/SPX protocol stacks and all the
related gunf that goes with it..
it is not guaranteed to work 100% correctly at this time
but as we had several people trying to work on it
I figured it would be better to get it checked in so
they could all get teh same thing to work on..

Mikes been using it for a year or so
but on 2.0

more changes and stuff will be merged in from other developers now that this is in.

Mike Mitchell, Network Engineer
AMTECH Systems Corporation, Technology and Manufacturing
8600 Jefferson Street, Albuquerque, New Mexico 87113 (505) 856-8000
supervisor@alb.asctmd.com
1995-10-26 20:31:59 +00:00
Garrett Wollman
233b60cec4 Say goodbye to IFF_NOTRAILERS. Support for trailers was officially
dropped for 4.4, but for some reason this flag lived on.  (Until
today, that is.)
1995-10-13 19:48:06 +00:00
Bruce Evans
bf25be48a5 Make everything except the unsupported network sources compile cleanly
with -Wnested-externs.
1995-08-16 16:14:28 +00:00
Rodney W. Grimes
9b2e535452 Remove trailing whitespace. 1995-05-30 08:16:23 +00:00
Garrett Wollman
ca55ea923a Added `fe' device drive r for Fujitsu MB86960A family.
Submitted by: M.S. <seki@sysrap.cs.fujitsu.co.jp>
1995-04-23 18:31:50 +00:00