can be in after receiving a FIN.
FWIW, NetBSD has this change for quite some time.
This has been tested at Netflix and Limelight in production traffic.
Reported by: Sam Kumar <samkumar99 at gmail.com> on transport@
Reviewed by: rrs
MFC after: 4 weeks
Sponsored by: Limelight Networks
Differential Revision: https://reviews.freebsd.org/D7475
- Return appropriate error code instead of ENOMEM when sosend() fails in
send_mpa_req.
- Fix for problematic race during destroy_qp.
- Abortive close in the failure of send_mpa_reject() instead of normal close.
- Remove the unnecessary doorbell flowcontrol logic.
Submitted by: Krishnamraju Eraparaju at Chelsio
MFC after: 1 month
Sponsored by: Chelsio communications
I-FORWARD-TSN chunk before any DATA or I-DATA chunk.
Thanks to Julian Cordes for finding this problem and prividing
packetdrill scripts to reporduce the issue.
MFC after: 3 days
And use new RNDIS set to configure NDIS offloading parameters.
MFC after: 1 week
Sponsored by: Microsoft
Differential Revision: https://reviews.freebsd.org/D7641
And switch MAC address query to use new RNDIS query function.
MFC after: 1 week
Sponsored by: Microsoft
Differential Revision: https://reviews.freebsd.org/D7639
For some odd reason SIGINT is only being delivered once, as opposed to multiple
times.
Disclaimer: this test was run on a kernel built on 08/14/2016. Need to build a
new kernel and rerun the test.
kern.vm_guest == none -> not a virtual machine
It's a bit of a misnomer with the function being named `isQEMU`... but FreeBSD's
support seems to be a bit more all-encompassing than NetBSD's is today.
Sponsored by: EMC / Isilon Storage Division
Summary:
First time BSS is cleared in booke_init(), Second time it's cleared in
powerpc_init(). Any variable initialized between two those guys gets wiped out
what is wrong. In particular it wipes tlb1_entries initialized by tlb1_init(),
which was fine when tlb1_init() was called a second time, but this was removed
in r304656.
Submitted by: Ivan Krivonos <int0dster_gmail.com>
Differential Revision: https://reviews.freebsd.org/D7638
'show active trace', or 'acttrace' for short, prints backtraces from running
threads only.
Reviewed by: mjg
Differential Revision: https://reviews.freebsd.org/D7646
=v is some ye olde gcc "use this specific register as the temp register"
thing that they've deprecated and clang/llvm doesn't implement.
Poked again and again by: sbruno
hardware send and receive PDU limits. Report these limits to ICL and
take them into account when setting the socket's send and receive buffer
sizes. The driver used a single hardcoded limit everywhere prior to
this change.
Sponsored by: Chelsio Communications
i.e. partial line, but set __SERR and errno in the same time, which
is inconsistent.
Now both OpenBSD and NetBSD return failure, i.e. no line and set error
indicators for such case, so make our fgetln() and fgetwln()
(as its wide version) compatible with the rest of *BSD.
PR: 212033
MFC after: 7 days
libifc (pronounced lib-ifconfig) aims to be a light abstraction layer between
programs and the kernel APIs for managing the network configuration.
This should hopefully make programs easier to maintain, and reduce code
duplication.
Work will begin on making ifconfig(8) use this library in the near future.
This code is still evolving. The interface should not be considered stable until
it is announced as such.
Submitted By: Marie Helene Kvello-Aune <marieheleneka@gmail.com>
Reviewed By: kp
Differential Revision: https://reviews.freebsd.org/D7529
Per jemalloc(3)/aligned_alloc(3), the behavior is undefined if the size
isn't an integral multiple of the alignment. Thus, this is a NetBSD-specific
test.
Sponsored by: EMC / Isilon Storage Division
obliterate possible error from sleep with errors from
umtxq_check_susp(), when looping to clear URWLOCK_{READ,WRITE}_WAITERS.
Noted and reviewed by: vangyzen
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
functions.
__SERR is for user and the rest of stdio code do not check it
for error sensing internally, only set it.
In vf(w)printf.c here it is more easy to save __SERR, clear and restore it.
It's not necessarily intuitive that the variables to query contain TRUSTEDBSD
in the prefix. Add non-TRUSTEDBSD prefixed knobs for querying things like
"_PC_ACL_NFS4".
MFC after: 1 week
Relnotes: yes
Reviewed by: wollman
Sponsored by: EMC / Isilon Storage Division
Differential Revision: https://reviews.freebsd.org/D7618
If there was some error, e.g. the sleep was interrupted, as in the
referenced PR, do_rw_rdlock() did not cleared URWLOCK_READ_WAITERS.
Since unlock only wakes up write waiters when there is no read
waiters, for URWLOCK_PREFER_READER kind of locks, the result was
missed wakeups for writers.
In particular, the most visible victims are ld-elf.so locks in
processes which loaded libthr, because rtld locks are urwlocks in
prefer-reader mode. Normal rwlocks fall into prefer-reader mode only
if thread already owns rw lock in read mode, which is not typical and
correspondingly less visible. In the PR, unowned rtld bind lock was
waited for in the process where only one thread was left alive.
Note that do_rw_wrlock() correctly clears URWLOCK_WRITE_WAITERS in
case of errors.
Reported and tested by: longwitz@incore.de
PR: 211947
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
Move all of the fopen() and open() calls to the top of main()
Restrict each FD to least privilege (read/seek only, write only, etc)
cap_enter(), and make all except the output FD read/seek only.
Reviewed by: emaste, ed, oshogbo, delphij
Approved by: so
MFC after: 3 days
Relnotes: yes
Sponsored by: ScaleEngine Inc.
Differential Revision: https://reviews.freebsd.org/D7358
the l2 entry is a block type and not an l3 page.
While here fix the string to correct the level name and add a missing ')'.
Obtained from: ABT Systems Ltd
MFC after: 1 month
Sponsored by: The FreeBSD Foundation
syscons spinlock for the output routine alone. It is better to extend
the coverage of the first syscons spinlock added in r162285. 2 locks
might work with complicated juggling, but no juggling was done. What
the 2 locks actually did was to cover some of the missing locking in
each other and deadlock less often against each other than a single
lock with larger coverage would against itself. Races are preferable
to deadlocks here, but 2 locks are still worse since they are harder
to understand and fix.
Prefer deadlocks to races and merge the second lock into the first one.
Extend the scope of the spinlocking to all of sc_cnputc() instead of
just the sc_puts() part. This further prefers deadlocks to races.
Extend the kdb_active hack from sc_puts() internals for the second lock
to all spinlocking. This reduces deadlocks much more than the other
changes increases them. The s/p,10* test in ddb gets much further now.
Hide this detail in the SC_VIDEO_LOCK() macro. Add namespace pollution
in 1 nested #include and reduce namespace pollution in other nested
#includes to pay for this.
Move the first lock higher in the witness order. The second lock was
unnaturally low and the first lock was unnaturally high. The second
lock had to be above "sleepq chain" and/or "callout" to avoid spurious
LORs for visual bells in sc_puts(). Other console driver locks are
already even higher (but not adjacent like they should be) except when
they are missing from the table. Audio bells also benefit from the
syscons lock being high so that audio mutexes have chance of being
lower. Otherwise, console drviver locks should be as low as possible.
Non-spurious LORs now occur if the bell code calls printf() or is
interrupted (perhaps by an NMI) and the interrupt handler calls
printf(). Previous commits turned off many bells in console i/o but
missed ones done by the teken layer.
tso_segsz pkthdr field during RX processing, and use the information in TCP for
more correct accounting and as a congestion control input. This is only a start,
and an audit of other uses for the data is left as future work.
Reviewed by: gallatin, rrs
Sponsored by: Netflix, Inc.
Differential Revision: https://reviews.freebsd.org/D7564
set later in the function. This fixes a potential NULL pointer dereference
found on arm64.
Obtained from: ABT Systems Ltd
MFC after: 1 week
Sponsored by: The FreeBSD Foundation
to what the 32-bit arm code does, with the exception that it always assumes
the tag is non-coherent.
Tested by: jmcneill
Obtained from: ABT Systems Ltd
MFC after: 1 week
Sponsored by: The FreeBSD Foundation
Change the vnode tests to use the current directory when creating temporary
files, which we can assume is a volatile work directory, and then make the
kqueue_test.sh driver _not_ abandon the directory created by Kyua.
This makes the various kqueue tests independent of each other, and ensures
the temporary file is cleaned up on failure.
Problem spotted by asomers@ when reviewing D4254.
- Increasing queue depth gives ~100% performance improvement for
randwrite fio test in Azure.
- New channel selection, which takes LUN id and the current cpuid
into consideration, gives additional ~20% performance improvement
for ranwrite fio test in Azure.
Submitted by: Hongzhang Jiang <honzhan microsoft com>
Modified by: sephe
MFC after: 1 week
Sponsored by: Microsoft
Differential Revision: https://reviews.freebsd.org/D7622
Decouple the send and receive limits on the amount of data in a single
iSCSI PDU. MaxRecvDataSegmentLength is declarative, not negotiated, and
is direction-specific so there is no reason for both ends to limit
themselves to the same min(initiator, target) value in both directions.
Allow iSCSI drivers to report their send, receive, first burst, and max
burst limits explicitly instead of using hardcoded values or trying to
derive all of them from the receive limit (which was the only limit
reported by the drivers prior to this change).
Display the send and receive limits separately in the userspace iSCSI
utilities.
Reviewed by: jpaetzel@ (earlier version), trasz@
Sponsored by: Chelsio Communications
Differential Revision: https://reviews.freebsd.org/D7279
