Commit Graph

266 Commits

Author SHA1 Message Date
nyan
6713e026ef Fix printf format error. 2003-02-24 14:32:27 +00:00
imp
cf874b345d Back out M_* changes, per decision of the TRB.
Approved by: trb
2003-02-19 05:47:46 +00:00
alfred
bf8e8a6e8f Remove M_TRYWAIT/M_WAITOK/M_WAIT. Callers should use 0.
Merge M_NOWAIT/M_DONTWAIT into a single flag M_NOWAIT.
2003-01-21 08:56:16 +00:00
shiba
f5d96fabf6 Add BUFFALO LPC-CF-CLT(10Base-T Compact Flash Ether Card). 2003-01-18 02:14:23 +00:00
schweikh
d3367c5f5d Correct typos, mostly s/ a / an / where appropriate. Some whitespace cleanup,
especially in troff files.
2003-01-01 18:49:04 +00:00
sam
14c32b5f40 network interface driver changes:
o don't strip the Ethernet header from inbound packets; pass packets
  up the stack intact (required significant changes to some drivers)
o reference common definitions in net/ethernet.h (e.g. ETHER_ALIGN)
o track ether_ifattach/ether_ifdetach API changes
o track bpf changes (use BPF_TAP and BPF_MTAP)
o track vlan changes (ifnet capabilities, revised processing scheme, etc.)
o use if_input to pass packets "up"
o call ether_ioctl for default handling of ioctls

Reviewed by:	many
Approved by:	re
2002-11-14 23:54:55 +00:00
imp
3339dd55d9 add some devices from NetBSD 2002-10-11 07:03:09 +00:00
brooks
14e083a35a Use if_printf() instead of printf() to print "ed#: blah". 2002-10-01 00:49:28 +00:00
imp
f88281a4a8 mbuf leak in the error case has been fixed. When we have
an error, go ahead and m_freem the buffer.

PR: 32666
Submitted by: Chi-Fung Fan
2002-09-30 00:18:12 +00:00
phk
1dfc2c167f Be consistent about "static" functions: if the function is marked
static in its prototype, mark it static at the definition too.

Inspired by:    FlexeLint warning #512
2002-09-28 17:15:38 +00:00
takawata
2584e4dbea Add ALLIED TELESIS,K.K. LA-ISA V2 ISA PnP ID.
Submitted by:	nork
MFC after: 3 days
2002-07-26 17:33:58 +00:00
imp
29d1e263c1 integrate from p4 repo:
o Honor NE2000DVF_{AX88190,DL10019} flags by setting the ED_FLAGS_xxxx
  flag.
o Mark linksys combo_ecard as ax88190
o Set the type_str to AX88190 for the ax88190 cards.

This fixes ax88190 based cards, for the most part, but doesn't seem to fix
the mii based dl10019 cards (aka linksys cards).
2002-07-22 21:28:46 +00:00
imp
66063ff556 More newcard devices:
Netgear FA-410TXC
	Netgear FA-411
	Lantech Fastnet TX
	Linksys pcm100
Hide the total wildcard device for SVEC too :-(

Obtained from: NetBSD/OpenBSD
2002-04-02 05:52:52 +00:00
alfred
3264aec746 Remove __P. 2002-03-20 02:08:01 +00:00
imp
1c4600ced3 Add EDIMAX ethernet card for NEWCARD from NetBSD 2002-01-29 07:08:56 +00:00
imp
55262e3b08 Patch to allow the ed driver interrupt routine to terminate if the
card is ejected while we're in this routine.

yamamoto-san's original patch had a small race window for AX88190
chips, which I corrected by limiting the number of iterations we'd try
to reset the bits to be about 15ms rather than forever.  This seems to
work for me, but I don't have a large collections of cards based on
this chipset.

Submitted by:	YAMAMOTO Shigeru
2001-11-24 16:15:18 +00:00
imp
3212bd4f7f Comment out some bogus entries. somehow they match everything, which
is bad.  I need to correct pccarddev, but I'm not sure how just at the
moment.  So I'm firewalling the damage.
2001-11-20 06:18:36 +00:00
imp
246c6c7de1 MF NetBSD's if_ne_pcmcia.c rev 1.82's list of devices 2001-11-15 08:15:44 +00:00
imp
6fdb4db61f Migrate to PCMCIA_CARD() macros 2001-11-15 07:52:49 +00:00
imp
249aae3888 s/PCCARD_/PCMCIA_/g in NEWCARD device tables to enable easier NetBSD sharing 2001-11-11 20:17:10 +00:00
luigi
f565e0a1df MFS: sync the ipfw/dummynet/bridge code with the one recently merged
into stable (mostly , but not only, formatting and comments changes).
2001-11-04 22:56:25 +00:00
luigi
f10c64732a Always compile in bridge hooks, or this code will not work (efficiently) with
the loadable bridge module.
2001-11-01 17:10:52 +00:00
asmodai
460dbf267c Fix obvious bug where return from probe was botched.
People with HP PCLAN+ NICs can now happily use the card again

PR:		21087
Submitted by:	M. B. Buchanan <buchanan@orbitworld.net>
2001-10-31 19:43:33 +00:00
luigi
f6153dda13 Make this compile again after the changes to make bridge kld'able 2001-10-07 00:18:48 +00:00
iedowse
20a6cccd28 Add an option ED_NO_MIIBUS, which causes the `ed' driver to be
built without support for miibus PHYs. Most ed cards don't need
miibus support, so it's useful to be able to avoid the bloat of
all the mii devices for small fixed-purpose kernels.
2001-09-29 22:32:03 +00:00
iedowse
08e82b6d3d Add a few missing spl calls in preparation for an MFC of the miibus
support.
2001-07-22 21:39:54 +00:00
iedowse
25fd88c17a Remove an old hack that remembered if the card type was Linksys by
storing a flag in the global variable 'linksys' during the probe
routine and reading it during the attach routine. We now have the
ED_VENDOR_LINKSYS vendor code stored in sc->vendor, so check that
instead.
2001-07-22 21:31:44 +00:00
iedowse
6e2ef43eed Attach the miibus for Linksys/Dlink cards from the attach routine,
not from the probe routine. This was an oversight when I originally
ported the miibus support to -current, though it was mostly harmless.

We now set the vendor code to the new value ED_VENDOR_LINKSYS in
ed_pccard_Linksys() at probe time. Then ed_pccard_attach() checks
the vendor code, and sets up the miibus if appropriate.

Reviewed by:	imp
2001-07-22 18:58:44 +00:00
imp
c2257f6c8a Add support for Dlink DL10022 to the ed driver. This is a mii part
bolted to a ne-2000 chip.  This is necessary for the NetGear FA-410TX
and other cards.

This also requires you add mii to your kernel if you have an ed driver
configured.

This code will result in a couple of timeout messages for ed on the
impacted cards.  Additional work will be needed, but this does work
right now, and many people need these cards.

Submitted by: Ian Dowse <iedowse@maths.tcd.ie>
2001-03-03 08:31:37 +00:00
luigi
38a15079cd Whoops... forgotten a few pieces in previous patch:
* a ">" is really ">=" ;
 * do not try to fetch zero-sized blocks from the card;
 * make sure that bpf gets the packets it wants even with
   bridging active;
2001-02-08 22:54:57 +00:00
luigi
d0c5714da1 Make sure that we do not accept packets shorter than a full ethernet
header, or we would have a negative length passed to ether_input().
2001-02-08 22:21:30 +00:00
phk
d214ae2171 Convert if_multiaddrs from LIST to TAILQ so that it can be traversed
backwards in the three drivers which want to do that.

Reviewed by:    mikeh
2001-02-06 10:12:15 +00:00
asmodai
e69fe706f1 Fix typo: wierd -> weird.
There is no such thing as wierd in the english language.
2001-02-06 09:25:10 +00:00
phk
709379c1ae Another round of the <sys/queue.h> FOREACH transmogriffer.
Created with:   sed(1)
Reviewed by:    md5(1)
2001-02-04 16:08:18 +00:00
phk
e87f7a15ad Mechanical change to use <sys/queue.h> macro API instead of
fondling implementation details.

Created with: sed(1)
Reviewed by: md5(1)
2001-02-04 13:13:25 +00:00
imp
dd1ea82faf Add a bunch of entries from NetBSD's if_ne_pcmcia.c v1.67. We still
need to verify that all the entries in pccard.conf are present in this
table.
2001-01-21 08:20:23 +00:00
wollman
70c88bb8da select() DKI is now in <sys/selinfo.h>. 2001-01-09 04:33:49 +00:00
imp
e60a899d71 Minor newbus/style(9) cleanups.
o Move the ax88190 code to its own function.
o Move all device_method_t, driver_t and DRIVER_MODULE definitions to the
  end of files.
o Wrap a few lines > 80 characters.
o Use the same devclass for all ed drivers.  This allows machines with
  multiple types of cards to have their cards numbered correctly.  Before,
  you could wind up with two ed0's.
o Protect if_edvar.h from multiple includes because I was there.
2000-12-26 06:38:04 +00:00
toshi
7a40368050 Fix my previous commit. Remove ed_get_Linksys() function prototypes. 2000-12-20 17:10:28 +00:00
toshi
3918bafb69 Linksys Fast Ethernet PCCARD cards supported by the ed driver now
require the addition of flag 0x80000 to their config line in
pccard.conf(5).  This flag is not optional.  These Linksys cards will
not be recognized without it.

Reviewed by:    imp, iwasaki
2000-12-18 15:28:53 +00:00
imp
e483aa0cee Call ed_probe_Novel in the AX88190 case as well.
Remove stary blank line.

Submitted by:	Seigo Tanimura <tanimura@r.dl.itc.u-tokyo.ac.jp>
2000-12-17 18:15:15 +00:00
imp
5d550a5aa9 Remove unnecessary includes found by phk's script. I've been building
these locally for ages.
2000-12-13 06:28:37 +00:00
imp
bf19b62fab Fix problem with ax88190 based cards trying to probe further after
matching the ax88190.
2000-12-13 06:27:23 +00:00
peter
b7953dc82c Argh, I have fixed this cut/paste error twice before. I must have
committed the wrong patch. :-(  sn_pccard_products[] should have
been static anyway.
2000-11-25 07:25:08 +00:00
peter
7c1d527781 Update the ed driver to probe and attach under a NEWCARD kernel (I was
using a cardbus based system with pccbb providing the pcic interface).
Something isn't quite right.. when the driver allocates and activates
its resources, the IO space that was requested reads as all zeros (versus
the original 0xff's as it normally is when there is no device responding).

Also, deactivate the resources before releasing them.  OLDCARD doesn't
seem to care but NEWCARD/CARDBUS get rather unhappy if you release
a resource that hasn't been deactivated yet.

Make pcic_p.c only compile with oldcard kernels.
2000-11-25 03:36:09 +00:00
msmith
3f1cd5592b Network modules are all "if_foo" not "foo". Avoid the confusing spew that
ensues when ifconfig tries to load if_ed.ko when it's already in the kernel.
2000-10-15 20:23:27 +00:00
phk
beadbd4365 Remove unneeded #include <machine/clock.h> 2000-10-15 14:19:01 +00:00
tanimura
25b044e9f1 Allocate memory resource to access the attribute memory of a card.
Reviewed by:	imp
2000-09-25 06:01:42 +00:00
ps
5f7726f4e7 Move the detection of Linksys PCMCIA cards from attach to probe.
This should solve the problems people were seeing with this driver.

Reported by:	phk & others.
2000-09-12 11:03:12 +00:00
nyan
25d5946a2e - Fixed the conversion to bus_space interface.
- Added PC-98 Cbus devices support.
  The original patch is submitted by chi@bd.mbn.or.jp (Chiharu Shibata)
- Removed old ed driver.
2000-08-17 12:15:45 +00:00