Respect MAXIMUM TRANSFER LENGTH field of Block Limits VPD page.
Nobody yet reported disk supporting I/Os less then our MAXPHYS value, but
since we any way have code to read Block Limits VPD page, that is easy.
Do not reread SCSI disk VPD pages on every device open.
Instead of rereading VPD pages on every device open, do it only on initial
device probe, and in cases when device reported via UNIT ATTENTIONs that
something has changed. Capacity is still rereaded on every open because
it is more critical for operation and more probable to change in run time.
On my tests with Intel 530 SSDs on mps(4) HBA this change reduces time
GEOM needs to retaste the device (that includes few open/close cycles)
from ~150ms to ~30ms.
Remove limits on size of READ/WRITE operations.
Instead of allocating up to 16MB or RAM at once to handle whole I/O,
allocate up to 1MB at a time, but do multiple ctl_datamove() and storage
I/Os if needed.
Make CAM target CTL frontend respect SIM I/O size limitations.
If datamove size is bigger then SIM can handle, or it has more segments
then this code can handle -- split it into several CTIO requests.
Add support for SCSI UNMAP commands to CTL.
This patch adds support for three new SCSI commands: UNMAP, WRITE SAME(10)
and WRITE SAME(16). WRITE SAME commands support both normal write mode
and UNMAP flag. To properly report UNMAP capabilities this patch also adds
support for reporting two new VPD pages: Block limits and Logical Block
Provisioning.
UNMAP support can be enabled per-LUN by adding "-o unmap=on" to `ctladm
create` command line or "option unmap on" to lun sections of /etc/ctl.conf.
At this moment UNMAP supported for ramdisks and device-backed block LUNs.
It was tested to work great with ZFS ZVOLs. For file-backed LUNs UNMAP
support is unfortunately missing due to absence of respective VFS KPI.
Sponsored by: iXsystems, Inc
Replace several instances of -1 with appropriate CAM_*_WILDCARD and types.
It was equal before r259397, but for good or bad, not any more for LUNs.
This change fixes at least CAM debugging.
Remove an unnecessary level of indirection for an argument.
This simplifies the code and should avoid the clang sparc
port from generating an abort() call.
Modify the NFSv4 client's Pathconf RPC (actually a Getattr Op.)
so that it only does the RPC for names that are answered by the RPC.
Doing the RPC for other names is harmless, but unnecessary.
Fix several panics when initialization of an ISA or PC-CARD device fails:
o Assign sc->an_dev in an_probe() (which isn't really a probe function in
the standard newbus sense) as we may need it for printing errors.
o Use device_printf() rather than if_printf() in an_reset() - this is
called from an_probe() long before the ifp structure is initialised
in an_attach().
o Initialize the ifp structure early in an_attach() as we use if_printf()
in cases where allocation of descriptors etc fails.
Retire smp_active. It was racey and caused demonstrated problems with
the cpufreq code. Replace its use with smp_started. There's at least
one userland tool that still looks at the kern.smp.active sysctl, so
preserve it but point it to smp_started as well.
Obtained from: Netflix, Inc.
Add the -a option to pmcstat. This produces a full stack track on the
sampled points. See the man page for details on how this works.
Obtained from: Netflix, Inc.
r265385 does not need to be MFCed, because the obsolete files in question
were never MFCed to any stable branch.
r265385
Remove the ifconfig test added in rev 263445. After discussion with
melifaro, we agreed that ifconfig's behavior was not a bug. The main
motivation for bin/187551 was to partially resolve kern/187549, but we
resolved kern/187549 in a different way instead.
ObsoleteFiles.inc
etc/mtree/BSD.tests.dist
sbin/ifconfig/tests/fibs_test.sh
sbin/ifconfig/tests/Makefile
sbin/ifconfig/Makefile
Remove /usr/tests/sbin/ifconfig
r263445
Add several ATF tests that deal with multiple fibs. They're described in
several different PRs, but the tests share some common code, so I'm
committing them together.
sbin/ifconfig/tests
sbin/ifconfig/tests/fibs_test.sh
sbin/ifconfig/tests/Makefile
sbin/ifconfig/Makefile
Add fibs_test.sh, which regresses bin/187551
tests/sys/netinet
tests/sys/netinet/fibs_test.sh
tests/sys/netinet/udp_dontroute.c
tests/sys/netinet/Makefile
tests/sys/Makefile
Add fibs_test.sh, which regresses kern/167947, kern/187552
kern/187549, kern/187550, and kern/187553
etc/mtree/BSD.tests.dist
Add newly created directories
nvme: Remove the software progress marker SET_FEATURE command during
controller initialization.
The spec says OS drivers should send this command after controller
initialization completes successfully, but other NVMe OS drivers are
not sending this command. This change will therefore reduce differences
between the FreeBSD and other OS drivers.
For IDENTIFY passthrough commands to Chatham prototype controllers, copy
the spoofed identify data into the user buffer rather than issuing the
command to the controller, since Chatham IDENTIFY data is always spoofed.
While here, fix a bug in the spoofed data for Chatham submission and
completion queue entry sizes.
For "nvmecontrol devlist", show namespace sizes in terms of MB instead of
GB to improve granularity of the reporting - especially for namespaces
that are on the order of 1 or 2 GB.
Check for special status code from FIRMWARE_ACTIVATE command
signifying that a reboot is required to complete activation
of the requested firmware image.
Make it possible for the initiator side to operate in both proxy
and normal mode; this makes it possible to compile with the former
by default, but use it only when neccessary. That's especially
important for the userland part.
Sponsored by: The FreeBSD Foundation
Improve use of socket buffer upcalls.
Use soreadable()/sowriteable() in socket upcalls to avoid extra wakeups
until we have enough data to read or space to write.
Increase partial receive len from 1K to 128K to not wake up on every
received packet.
This significantly reduces locks congestion and CPU usage and improves
throughput for large I/Os on NICs without TSO and LRO.
MFC r264552 by mav@:
Close the race in older code, that caused connection stuck after r264348.
Sponsored by: iXsystems, Inc.
