Commit Graph

110 Commits

Author SHA1 Message Date
manu
329de1d73b arm64: Fix compile when removing SOC_ROCKCHIP_* options
Make every rockchip file depend on the multiple soc_rockchip options
While here make rk_i2c and rk_gpio depend on their device options.

Reported by:	sbruno
2019-02-10 08:14:06 +00:00
cem
78a5bf8935 Revert r343713 temporarily
The COVERAGE option breaks xtoolchain-gcc GENERIC kernel early boot
extremely badly and hasn't been fixed for the ~week since it was committed.
Please enable for GENERIC only when it doesn't do that.

Related fallout reported by:	lwhsu, tuexen (pr 235611)
2019-02-10 07:54:46 +00:00
andrew
22d4af1621 Enable COVERAGE and KCOV by default on arm64 and amd64.
This allows userspace to trace the kernel using the coverage sanitizer
found in clang. It will also allow other coverage tools to be built as
modules and attach into the same framework.

Sponsored by:	DARPA, AFRL
2019-02-03 12:46:27 +00:00
kib
1b7795b92a Make iflib a loadable module.
iflib is already a module, but it is unconditionally compiled into the
kernel.  There are drivers which do not need iflib(4), and there are
situations where somebody might not want iflib in kernel because of
using the corresponding driver as module.

Reviewed by:	marius
Discussed with:	erj
Sponsored by:	The FreeBSD Foundation
MFC after:	2 weeks
Differential revision:	https://reviews.freebsd.org/D19041
2019-01-31 19:05:56 +00:00
andrew
be20ad6345 Extract the coverage sanitizer KPI to a new file.
This will allow multiple consumers of the coverage data to be compiled
into the kernel together. The only requirement is only one can be
registered at a given point in time, however it is expected they will
only register when the coverage data is needed.

A new kernel conflig option COVERAGE is added. This will allow kcov to
become a module that can be loaded as needed, or compiled into the
kernel.

While here clean up the #include style a little.

Reviewed by:	kib
Sponsored by:	DARPA, AFRL
Differential Revision:	https://reviews.freebsd.org/D18955
2019-01-29 11:04:17 +00:00
gonzo
7b97f0ab83 [rpi] Reorganize spigen(4) overlays for Raspberry Pi
- Remove CS=2 entry from spigen-rpi2 since it didn't work
- Add spigen-rpi3 overlay for Raspberry Pi 3
- Enable rpi overlay modules for GENERIC kernel on aarch64

PR:		233489
Submitted by:	bobf@mrp3.com
Reviewed by:	db
MFC after:	1 week
Differential Revision:	https://reviews.freebsd.org/D16088
2019-01-16 01:08:34 +00:00
cognet
38d007eb07 Impleent COMPAT_FREEBSD32 for arm64.
This is based on early work by andrew@.
2019-01-13 19:49:46 +00:00
andrew
5e0e456d9f Add support for the Clang Coverage Sanitizer in the kernel (KCOV).
When building with KCOV enabled the compiler will insert function calls
to probes allowing us to trace the execution of the kernel from userspace.
These probes are on function entry (trace-pc) and on comparison operations
(trace-cmp).

Userspace can enable the use of these probes on a single kernel thread with
an ioctl interface. It can allocate space for the probe with KIOSETBUFSIZE,
then mmap the allocated buffer and enable tracing with KIOENABLE, with the
trace mode being passed in as the int argument. When complete KIODISABLE
is used to disable tracing.

The first item in the buffer is the number of trace event that have
happened. Userspace can write 0 to this to reset the tracing, and is
expected to do so on first use.

The format of the buffer depends on the trace mode. When in PC tracing just
the return address of the probe is stored. Under comparison tracing the
comparison type, the two arguments, and the return address are traced. The
former method uses on entry per trace event, while the later uses 4. As
such they are incompatible so only a single mode may be enabled.

KCOV is expected to help fuzzing the kernel, and while in development has
already found a number of issues. It is required for the syzkaller system
call fuzzer [1]. Other kernel fuzzers could also make use of it, either
with the current interface, or by extending it with new modes.

A man page is currently being worked on and is expected to be committed
soon, however having the code in the kernel now is useful for other
developers to use.

[1] https://github.com/google/syzkaller

Submitted by:	Mitchell Horne <mhorne063@gmail.com> (Earlier version)
Reviewed by:	kib
Testing by:	tuexen
Sponsored by:	DARPA, AFRL
Sponsored by:	The FreeBSD Foundation (Mitchell Horne)
Differential Revision:	https://reviews.freebsd.org/D14599
2019-01-12 11:21:28 +00:00
manu
a3af78d3ad mv_thermal: Add thermal driver for AP806 and CP110 thermal sensor
Sponsored by:	Rubicon Communications, LLC ("Netgate")
2018-12-12 22:33:05 +00:00
manu
46170dc3e9 arm64: Add mv_cp110_icu and mv_cp110_gicp
icu is a interrupt concentrator in the CP110 block and gicp
is a gic extension to allow interrupts in the CP block to be turned
into GIC SPI interrupts

Sponsored by:	Rubicon Communications, LLC ("Netgate")
2018-12-12 22:08:43 +00:00
manu
c6fea0d9a5 arm64: mv_gpio: Add Marvell 8K support
While here put the interrupts setup in it's own function

Sponsored by:	Rubicon Communications, LCC ("Netgate")
2018-12-12 22:02:57 +00:00
manu
7abba6b3dd arm64: mvebu_pinctrl: Add driver for Marvell Pinmux Controller
Add a driver compatible with Marvell mvebu-pinctrl and add ap806-pinctrl
support.

Sponsored by:	Rubicon Communications, LCC ("Netgate")
2018-12-12 22:00:05 +00:00
manu
a3e7e99078 arm64: Add new SoC type MARVELL_8K
Sponsored by:	Rubicon Communications, LLC ("Netgate")
2018-12-12 21:58:30 +00:00
manu
f7c033a4e8 arm64: allwinner: Add pwm driver
Add a pwm driver for Allwinner PWM
Add pwm and aw_pwm to the GENERIC kernel
2018-12-12 20:58:43 +00:00
andreast
4fd47b16f4 Build the dtb for the rock64 board.
Reviewed by:	manu@
2018-12-02 19:36:20 +00:00
manu
0fec4403f4 Add Silergy SYR827 PMIC driver
SYR827 is a PMIC that can output a voltage from 0.7125V to 1.5V in 12.5mV steps
It's controlled via I2C.

MFC after:	1 month
2018-12-01 20:31:49 +00:00
manu
eb7da2ff3a arm64/rockchip: add RK3399 support
Add CRU (Clock and Reset Unit) driver for RK3399.
Add support in rk_pinctrl driver.

Submitted by:  Greg V <greg@unrelenting.technology> (Original version)
Differential Revision: https://reviews.freebsd.org/D16732

MFC after:	1 month
2018-12-01 20:28:16 +00:00
manu
0dd2c459cb arm64: Add rk_i2c and rk805 to GENERIC
MFC after:	1 month
2018-11-28 13:54:39 +00:00
manu
1df86997a0 arm64: Add evdev support to GENERIC 2018-11-26 17:59:25 +00:00
andrew
ddce67d5c4 Add the KUBSAN options to the arm64 and amd64 GENERIC kernel config files.
As the kernel file size may be too large to run with a stock loader comment
them out for now.

Sponsored by:	DARPA, AFRL
2018-11-06 17:47:58 +00:00
kevans
17b90b88be Compile in VERBOSE_SYSINIT support by default, remain silent by default
The loader tunable 'debug.verbose_sysinit' may be used to toggle verbosity.
This is added to the debugging section of these kernconfs to be turned off
in stable branches for clarity of intent.

MFC after:	never
2018-10-31 22:38:19 +00:00
tuexen
9d144c6451 Address the warning regarding duplicate option 'GEOM_PART_GPT' when
configuring kernels for i386, amd64, and arm64.
The 'GEOM_PART_GPT' option was added to the DEFAULTS configuration
in r337967.

Approved by:		re (kib@)
Reviewed by:		ler@
Differential Revision:	https://reviews.freebsd.org/D17458
Sponsored by:		Netflix, Inc.
2018-10-07 15:54:13 +00:00
manu
cf3e18f4f6 a10_timer: Update the driver so we can use it on other SoC
a10_timer is currently use in UP allwinner SoC (A10 and A13).
Those don't have the generic arm timer.
The arm generic timecounter is broken in the A64 SoC, some attempts have
been made to fix the glitch but users still reported some minor ones.
Since the A64 (and all Allwinner SoC) still have this timer controller, rework
the driver so we can use it in any SoC.
Since it doesn't have the 64 bits counter on all SoC, use one of the
generic 32 bits counter as the timecounter source.

PR:	229644
2018-08-23 18:46:05 +00:00
manu
4bc02baf1f arm64: GENERIC: Compile allwinner dtbs 2018-08-23 13:25:32 +00:00
gonzo
e843abc9ba Add muge(4) to the arm64 GENERIC kernel
muge(4) is the USB ethernet adapter that is used in RPi 3B+. Shipping it
in GENERIC kernel allows using NFS root out of the box instead of either
building custom kernel or modifying loader.conf for early loading of if_muge.ko

No objections:	emaste
2018-08-21 21:30:19 +00:00
manu
a6f0cd92bb arm64: allwinner: Add aw_syscon driver to GENERIC
Recent DTS use the syscon for the emac controller.
We support this but since U-Boot is still using old DTS it was never
needed for us to add this support, but this is a problem when using upstream
recent DTS and will be when U-Boot will catch up.

While here add a new compatible to the aw_syscon driver as Linux changed it ...
2018-08-19 18:55:33 +00:00
jhb
5f8e558a6b Make 'device crypto' lines more consistent.
- In configurations with a pseudo devices section, move 'device crypto'
  into that section.
- Use a consistent comment.  Note that other things common in kernel
  configs such as GELI also require 'device crypto', not just IPSEC.

Reviewed by:	rgrimes, cem, imp
Differential Revision:	https://reviews.freebsd.org/D16775
2018-08-18 20:32:08 +00:00
loos
21f5deb5e6 Add support to the Marvell Xenon SDHCI controller.
Tested on Espresso.bin (37x0) and Macchiato.bin (8k) with SD cards and
eMMCs.

Obtained from:	pfSense
Sponsored by:	Rubicon Communications, LLC (Netgate)
2018-08-14 16:33:30 +00:00
manu
730b0d8415 nvmem: Add nvmem interface and helpers
The nvmem interface helps provider of nvmem data to expose themselves to consumer.
NVMEM is generally present on some embedded board in a form of eeprom or fuses.
The nvmem api are helpers for consumer to read/write the cell data from a provider.

Differential Revision:	https://reviews.freebsd.org/D16419
2018-07-31 19:08:24 +00:00
andrew
f9a484901c Enable VIMAGE on arm64 again. A workaround for modules with static VNET
variables has been committed so these should work now.

PR:		223670
Sponsored by:	DARPA, AFRL
2018-07-30 15:57:58 +00:00
manu
4ff235e635 arm64: Add vt_efifb to GENERIC
We can now have efifb being setup correctly.
Enjoy video output on some boards when you couldn't before.

Tested-On:  Pine64
Tested-On:  Pine64-LTS
Tested-On:  Pinebook
2018-07-19 21:59:52 +00:00
mw
3d41e80ced Enable UART support for Xilinx Ultrascale+ SoCs
Xilinx Ultrascale+ are based on Cortex-A53 and use existing
UART driver (uart_dev_cdnc). Enable it in arm64 GENERIC config.

Submitted by: Michal Stanek <mst@semihalf.com>
Obtained from: Semihalf
2018-07-13 19:54:22 +00:00
manu
653ad25d24 if_dwc_rk: Add DesignWare driver for RockChip SoCs.
Add driver for the designware ethernet controller found in some RockChip SoCs.
The driver still rely on a lot of things setup by the bootloader like clocks
and phy mode.
But since netbooting is the only/easiest way to boot rockchip board at the
moment add the driver so other people can test/dev on thoses boards.
2018-06-14 06:28:09 +00:00
db
5cacb41edf Add a driver for the BCM2835 Mini-UART as seen on the RPi3
Reviewed by:	andrew
Approved by:	andrew
Differential Revision:	https://reviews.freebsd.org/D15684
2018-06-12 13:26:31 +00:00
andrew
128c3e8914 Remove the psci option from arm64. It is now a standard option as it is
required to boot correctly.

Sponsored by:	DARPA, AFRL
2018-06-10 19:42:44 +00:00
markj
5594f37668 Enable kernel dump features in GENERIC for most platforms.
This turns on support for kernel dump encryption and compression, and
netdump. arm and mips platforms are omitted for now, since they are more
constrained and don't benefit as much from these features.

Reviewed by:	cem, manu, rgrimes
Tested by:	manu (arm64)
Relnotes:	yes
Differential Revision:	https://reviews.freebsd.org/D15465
2018-05-19 19:53:23 +00:00
andrew
359ac3e429 Enable the Qualcomm MSM UART driver. This is needed for some Qualcomm
Snapdragon SoCs.

Obtained from:	ABT Systems Ltd
Sponsored by:	Turing Robotic Industries
2018-05-18 11:32:48 +00:00
manu
6caecdadde arm64: Add ALT_BREAK_TO_DEBUGGER to GENERIC
It is useful to enter kdb with an escape sequence.
While here move the USB_DEBUG with the others debug options and define
nooptions USB_DEBUG for GENERIC-NODEBUG
2018-05-10 09:37:50 +00:00
br
976dcf366c Enable Qualcomm Debug Subsystem (QDSS) block on MSM8916 SoC.
This is required for ARM Coresight operation on Dragonboard 410c.

Sponsored by:	DARPA, AFRL
Differential Revision:	https://reviews.freebsd.org/D14987
2018-04-10 12:53:48 +00:00
manu
b7a05ac56b rk3328: Add support for this SoC
* rk_cru is a cru driver that needs to be subclassed by
  the real CRU driver
* rk_clk_pll handle the pll type clock on RockChip SoC, it's only read
  only for now.
* rk_clk_composite handle the different composite clock types (with gate,
  with mux etc ...)
* rk_clk_gate handle the RockChip gates
* rk_clk_mux handle the RockChip muxes (unused for now)
* Only clocks for supported devices are supported for now, the rest will be
  added when driver support comes
* The assigned-clock* property are not handled for now so we rely a lot on the
  bootloader to setup some initial values for some clocks.
2018-02-26 21:25:50 +00:00
pkelsey
91dbc8d21a Greatly reduce the number of #ifdefs supporting the TCP_RFC7413 kernel option.
The conditional compilation support is now centralized in
tcp_fastopen.h and tcp_var.h. This doesn't provide the minimum
theoretical code/data footprint when TCP_RFC7413 is disabled, but
nearly all the TFO code should wind up being removed by the optimizer,
the additional footprint in the syncache entries is a single pointer,
and the additional overhead in the tcpcb is at the end of the
structure.

This enables the TCP_RFC7413 kernel option by default in amd64 and
arm64 GENERIC.

Reviewed by:	hiren
MFC after:	1 month
Sponsored by:	Limelight Networks
Differential Revision:	https://reviews.freebsd.org/D14048
2018-02-26 03:03:41 +00:00
kevans
e9f76e5656 if_awg: Use syscon prop if it exists
The emac bindings that are landing in Linux 4.15 specify a syscon property
on the emac node that point to /soc/syscon. Use this property if it's
specified, but maintain backwards compatibility with the old method.

The older method is still used for boards that we get .dtb from u-boot, such
as pine64, that did not yet have stable emac bindings.

Tested on:	Banana Pi-M3 (a83t)
Tested on:	Pine64 (a64)
Reviewed by:	manu
Differential Revision:	https://reviews.freebsd.org/D13296
2018-01-04 22:37:15 +00:00
ed
5a2c860a91 Make COMPAT_FREEBSD32 part of GENERIC on arm64.
The cloudabi32.ko kernel modules can only be loaded on AMD64 and ARM64
by kernels built with COMPAT_FREEBSD32. Even though COMPAT_FREEBSD32
does not support the execution of native FreeBSD executables, do add it
to GENERIC, to make cloudabi32.ko usable.

According to size(1), this makes the kernel image approximately 0.7%
larger.

Reviewed by:	andrew, imp, emaste
Differential Revision:	https://reviews.freebsd.org/D13311
2017-12-03 19:26:14 +00:00
emaste
40ebf27a67 Temporarily disable VIMAGE on arm64
Loading a kernel module with a static VNET_DEFINE'd variable (e.g.
if_lagg) currently results in a kernel panic.

PR:		223670
2017-11-24 19:21:21 +00:00
andrew
826cc84370 Add a driver for the EFI RTC. This uses the EFI Runtime Services to query
the system time.

As we seem to only read this time on boot, and this is the only source of
time on many arm64 machines we need to enable this by default there. As
this is not always the case with U-Boot firmware, or when we have been
booted from a non-UEFI environment we only enable the device driver when
the Runtime Services are present and reading the time doesn't result in an
error.

PR:		212185
Reviewed by:	imp, kib
Tested by:	emaste
Relnotes:	yes
Sponsored by:	DARPA, AFRL
Differential Revision:	https://reviews.freebsd.org/D12650
2017-11-21 17:23:16 +00:00
eadler
45275e3a26 Update several more URLs
- Primarily http -> https
- Primarily FreeBSD project URLs
2017-10-29 08:17:03 +00:00
bz
48b1992757 With r181803 on 2008-08-17 23:27:27Z the first VIMAGE commit went into
HEAD.  Enable VIMAGE in GENERIC kernels and some others (where GENERIC does
not exist) on HEAD.

Disable building LINT-VIMAGE with VIMAGE being default.

This should give it a lot more exposure in the run-up to 12 to help
us evaluate whether to keep it on by default or not.
We are also hoping to get better performance testing.
The feature can be disabled using nooptions.

Requested by:		many
Reviewed by:		kristof, emaste, hiren
X-MFC after:		never
Relnotes:		yes
Differential Revision:	https://reviews.freebsd.org/D12639
2017-10-20 21:40:59 +00:00
jpaetzel
b35131985b Fix indentation for r323068
PR:	220170
Reported by:	lidl
MFC after:	3 days
Pointyhat to:	jpaetzel
2017-09-19 20:40:05 +00:00
mw
87549eced1 Expand Marvell NIC description in arm64 GENERIC config
Suggested by: emaste
2017-09-11 19:00:53 +00:00
mw
9397c58678 Enable compilation of Marvell NETA controller with arm64 GENERIC
This patch enables network operation on Marvell Armada 3700 SoC.

Submitted by: Patryk Duda <pdk@semihalf.com>
Obtained from: Semihalf
Sponsored by: Semihalf
Differential Revision: https://reviews.freebsd.org/D12259
2017-09-09 11:56:48 +00:00