'net.inet.ip.fw.default_to_accept'. The current value can also be queried
via a read-only sysctl of the same name.
Requested by: plosher
MFC after: 1 week
(i.e. seems to be) already set.
This should reduce console noise due to curvnet recursion reports.
This change has no impact on nooptions VIMAGE builds.
Approved by: julian (mentor)
previously always pointing to the default vnet context, to a
dynamically changing thread-local one. The currvnet context
should be set on entry to networking code via CURVNET_SET() macros,
and reverted to previous state via CURVNET_RESTORE(). Recursions
on curvnet are permitted, though strongly discuouraged.
This change should have no functional impact on nooptions VIMAGE
kernel builds, where CURVNET_* macros expand to whitespace.
The curthread->td_vnet (aka curvnet) variable's purpose is to be an
indicator of the vnet context in which the current network-related
operation takes place, in case we cannot deduce the current vnet
context from any other source, such as by looking at mbuf's
m->m_pkthdr.rcvif->if_vnet, sockets's so->so_vnet etc. Moreover, so
far curvnet has turned out to be an invaluable consistency checking
aid: it helps to catch cases when sockets, ifnets or any other
vnet-aware structures may have leaked from one vnet to another.
The exact placement of the CURVNET_SET() / CURVNET_RESTORE() macros
was a result of an empirical iterative process, whith an aim to
reduce recursions on CURVNET_SET() to a minimum, while still reducing
the scope of CURVNET_SET() to networking only operations - the
alternative would be calling CURVNET_SET() on each system call entry.
In general, curvnet has to be set in three typicall cases: when
processing socket-related requests from userspace or from within the
kernel; when processing inbound traffic flowing from device drivers
to upper layers of the networking stack, and when executing
timer-driven networking functions.
This change also introduces a DDB subcommand to show the list of all
vnet instances.
Approved by: julian (mentor)
active network stack instance. Turning on options VIMAGE at compile
time yields the following changes relative to default kernel build:
1) V_ accessor macros for virtualized variables resolve to structure
fields via base pointers, instead of being resolved as fields in global
structs or plain global variables. As an example, V_ifnet becomes:
options VIMAGE: ((struct vnet_net *) vnet_net)->_ifnet
default build: vnet_net_0._ifnet
options VIMAGE_GLOBALS: ifnet
2) INIT_VNET_* macros will declare and set up base pointers to be used
by V_ accessor macros, instead of resolving to whitespace:
INIT_VNET_NET(ifp->if_vnet); becomes
struct vnet_net *vnet_net = (ifp->if_vnet)->mod_data[VNET_MOD_NET];
3) Memory for vnet modules registered via vnet_mod_register() is now
allocated at run time in sys/kern/kern_vimage.c, instead of per vnet
module structs being declared as globals. If required, vnet modules
can now request the framework to provide them with allocated bzeroed
memory by filling in the vmi_size field in their vmi_modinfo structures.
4) structs socket, ifnet, inpcbinfo, tcpcb and syncache_head are
extended to hold a pointer to the parent vnet. options VIMAGE builds
will fill in those fields as required.
5) curvnet is introduced as a new global variable in options VIMAGE
builds, always pointing to the default and only struct vnet.
6) struct sysctl_oid has been extended with additional two fields to
store major and minor virtualization module identifiers, oid_v_subs and
oid_v_mod. SYSCTL_V_* family of macros will fill in those fields
accordingly, and store the offset in the appropriate vnet container
struct in oid_arg1.
In sysctl handlers dealing with virtualized sysctls, the
SYSCTL_RESOLVE_V_ARG1() macro will compute the address of the target
variable and make it available in arg1 variable for further processing.
Unused fields in structs vnet_inet, vnet_inet6 and vnet_ipfw have
been deleted.
Reviewed by: bz, rwatson
Approved by: julian (mentor)
import from p4 bms_netdev. Summary of changes:
* Connect netinet6/in6_mcast.c to build.
The legacy KAME KPIs are mostly preserved.
* Eliminate now dead code from ip6_output.c.
Don't do mbuf bingo, we are not going to do RFC 2292 style
CMSG tricks for multicast options as they are not required
by any current IPv6 normative reference.
* Refactor transports (UDP, raw_ip6) to do own mcast filtering.
SCTP, TCP unaffected by this change.
* Add ip6_msource, in6_msource structs to in6_var.h.
* Hookup mld_ifinfo state to in6_ifextra, allocate from
domifattach path.
* Eliminate IN6_LOOKUP_MULTI(), it is no longer referenced.
Kernel consumers which need this should use in6m_lookup().
* Refactor IPv6 socket group memberships to use a vector (like IPv4).
* Update ifmcstat(8) for IPv6 SSM.
* Add witness lock order for IN6_MULTI_LOCK.
* Move IN6_MULTI_LOCK out of lower ip6_output()/ip6_input() paths.
* Introduce IP6STAT_ADD/SUB/INC/DEC as per rwatson's IPv4 cleanup.
* Update carp(4) for new IPv6 SSM KPIs.
* Virtualize ip6_mrouter socket.
Changes mostly localized to IPv6 MROUTING.
* Don't do a local group lookup in MROUTING.
* Kill unused KAME prototypes in6_purgemkludge(), in6_restoremkludge().
* Preserve KAME DAD timer jitter behaviour in MLDv1 compatibility mode.
* Bump __FreeBSD_version to 800084.
* Update UPDATING.
NOTE WELL:
* This code hasn't been tested against real MLDv2 queriers
(yet), although the on-wire protocol has been verified in Wireshark.
* There are a few unresolved issues in the socket layer APIs to
do with scope ID propagation.
* There is a LOR present in ip6_output()'s use of
in6_setscope() which needs to be resolved. See comments in mld6.c.
This is believed to be benign and can't be avoided for the moment
without re-introducing an indirect netisr.
This work was mostly derived from the IGMPv3 implementation, and
has been sponsored by a third party.
incorrectly output, if the RB-tree enumeration happened to reuse the
same chain for a mode switch: that is, both ALLOW and BLOCK records
were appended for the same group, in the same mbuf packet chain.
This was introduced during an mbuf chain layout bug fix involving
m_getptr(), which obviously cannot count from offset 0 on the
second pass through the RB-tree when serializing the IGMPv3
group records into the pending mbuf chain.
Cut over to KTR_INET for IGMPv3 CTR usage.
processed by ipfw once - avoid second ipfw_chk() call.
This saves us from unnecessary IPFW_RLOCK(), m_tag_find() calls and
ip/tcp/udp header parsing.
MFC after: 2 month
rearrange / replace / adjust several INIT_VNET_* initializer
macros, all of which currently resolve to whitespace.
Reviewed by: bz (an older version of the patch)
Approved by: julian (mentor)
(colloquially known as if_addrlist). Currently not acquired around
interface address loops that call out to the routing code due to
potential lock order issues.
MFC after: 3 weeks
lookup of 'ia' from if_addrhead through most use. Note that we
currently have to drop it prematurely in some cases due to calls out to
the routing and interface code while using 'ia', but this closes many
races. Annotate several potential races that persist after this change.
Move to using M_NOWAIT for allocating new interface addresses due to
lock(s) being held.
MFC after: 3 weeks
of the implementation of ioctls. This makes the mapping of ioctls to
specific privileges more explicit, and also simplifies the
implementation by reducing the use of FALLTHROUGH handling in switch.
While this is not intended to be a functional change, it does mean
that certain privilege checks are now performed earlier, so EPERM
might be returned in preference to EADDRNOTAVAIL for management
ioctls that could have failed for both reasons.
MFC after: 3 weeks
that it is easier to lock:
- Handle the unsupported ioctl case at the beginning of in_control(),
handing off to ifp->if_ioctl, rather than looking up interfaces and
addresses unnecessarily in this case.
- Make it an invariant that ifp is always non-NULL when running
in_control()-implemented ioctls, simplifying the code structure.
MFC after: 3 weeks
Match the bracketing in netstat.
Since the cleanup of MROUTING, ports have broken because they
expect to include <netinet/ip_mroute.h> without including
<sys/queue.h>. Fix breakage at source.
The real fix, of course, is to fix the MROUTING APIs by blowing them
away and replacing them with something else...
variable. Acquire the interface address list lock when iterating over
the interface address list searching for a matching received broadcast
address.
MFC after: 2 weeks
we recognize its a retransmit, ahead of the PR-SCTP
work. Without this fix, we end up NOT reducing flight
size and causing an miscalculation when PR-SCTP is active
and data is skipped.
Obtained from: Michael Tuexen.
and CARPSTATS_INC(), rather than directly manipulating the fields of
the structure. This will make it easier to change the implementation
of these statistics, such as using per-CPU versions of the data
structure.
MFC after: 3 days
and PIMSTAT_INC(), rather than directly manipulating the fields of
the structure. This will make it easier to change the
implementation of these statistics, such as using per-CPU versions
of the data structure.
MFC after: 3 days
and MRTSTAT_INC(), rather than directly manipulating the fields of
the structure. This will make it easier to change the
implementation of these statistics, such as using per-CPU versions
of the data structure.
MFC after: 3 days
