With both of these flags, the backup was created via rename(dest, backup)
followed by rename(tmp, dest). This left the destination file missing
for a moment which contradicts the point of -S.
This fixes a race with installworld where PRECIOUSPROG and PRECIOUSLIB
files (which use -S for installation) would briefly be missing. In the
case of installing rtld with parallel installworld it could render an
error due to not having rtld present to run install/cp in another
process.
Reported by: jhb
Reviewed by: jhb
MFC after: 1 week
Sponsored by: EMC / Isilon Storage Division
Differential Revision: https://reviews.freebsd.org/D7451
This is a minor nit after r289391 made all installations to a directory always
end in a trailing '/'.
MFC after: 3 days
Sponsored by: EMC / Isilon Storage Division
removing CFLAGS+= -static
`CFLAGS+= -static` was a carryover from pre-r289195 with
usr.bin/tar/test/Makefile that should have been specified in LDFLAGS
There doesn't seem to be an apparent need for static compilation
of the test binaries.
Differential Revision: https://reviews.freebsd.org/D7430
MFC after: 1 week
Obtained-from: opBSD (418a491eed20d2603ddd1f1bd92c2c0d95094002)
Submitted by: op
Sponsored by: EMC / Isilon Storage Division
2 extra options not available neither on other BSD nor in GNU sdiff:
--diff-pid and --pipe-fd were present in the SoC code, none were usable
Just remove it
Add -sac (space after cast) and -nsac options.
These control whether space character is put after a cast operator or not.
Default is -nsac.
Add -U option for providing a file containing list of types.
This is needed for properly deciding which asterisks denote unary
operation and which denote binary.
These come from PostgreSQL.
Reference:
84b00e3d4649c52cf383
Differential Revision: https://reviews.freebsd.org/D6966 (Partial)
Submitted by: Piotr Stefaniak
trussinfo->curthread must be initialized before calling enter_syscall(),
it is used by t->proc->abi->fetch_args().
Without that truss is segfaulting and the attached program also crash.
Submitted by: Nikita Kozlov (nikita@gandi.net)
Reviewed by: jhb
MFC after: 3 days
Differential Revision: https://reviews.freebsd.org/D7399
or "+" (these are invalid, because there is no preceding operand).
When bsdgrep attempts to emulate GNU grep in discarding and ignoring the
invalid ? or + operators, some later logic in tre_compile_fast() goes
beyond the end of the buffer, leading to a crash.
Fix this by bailing out, and reporting a bad pattern instead.
Reported by: Steve Kargl
MFC after: 1 week
While big, the change was meant to have no effect on behavior and instead
so far we have found two regressions: one in the etcupdate tests and
another one in the games/openttd port[1].
Revert to a known working state. We will likely have to split the patch in
functional parts before bringing back the changes.
PR: 195929
Reported by: danfe, madpilot [1]
For now maintain the local style in this file.
Reviewed by: jilles
Reference:
9099a9f17b
Differential Revision: https://reviews.freebsd.org/D6966 (Partial)
Submitted by: Piotr Stefaniak
clang-analyzer complained that eqin() sets file-scoped pointer param_start
to point into char buffer defined in scan_profile(), and once
scan_profile() exits, param_start is a "dangling reference". param_start
was never used afterwards, but it's cleaner to move it to set_option()
which is the only branch where param_start is needed.
Reference:
ab0e44e5da
Differential Revision: https://reviews.freebsd.org/D6966 (Partial)
Submitted by: Piotr Stefaniak
It's pr_comment.c that should decide whether to put a "star comment
continuation" or not. This duplicates code a bit, but it simplifies
pr_comment() at the same time since pr_comment() no longer has to "signal"
whether a star continuation is needed or not.
This change requires indent(1) to not wrap comment lines that lack a blank
character, but I think it's for the better if you look at cases when that
happens (mostly long URIs and file system paths, which arguably shouldn't
be wrapped).
It also fixes two bugs:
1. Cases where asterisk is a part of the comment's content (like in "*we*
are the champions") and happens to appear at the beginning of the line,
misleading dump_line() into thinking that this is part of the star comment
continuation, leading to misalignment.
2. Cases where blank starred lines had three too many characters on the
line when wrapped.
Reference:
3b41ee78aa
Differential Revision: https://reviews.freebsd.org/D6966 (Partial)
Submitted by: Piotr Stefaniak
After a blank line was printed (to separate paragraphs in comments), the
next line was sometimes wrapped to the column at which the previous
non-empty line ended. The fix is to reset the last blank pointer (last_bl)
on newline.
References:
345663c07a
Differential Revision: https://reviews.freebsd.org/D6966 (Partial)
Submitted by: Piotr Stefaniak
Modify count_spaces() to take a third parameter "end" that will make the
function return when the end is reached. This lets the caller pass a
pointer to non nul-terminated sequence of characters. Rename
count_spaces() to count_spaces_until() and reinstate count_spaces(), this
time based on count_spaces_until().
Use count_spaces_until() to recalculate current column when going through
a comment just before the fragment which decides if current line of the
comment should be wrapped. This move simplifies this code by eliminating
the need for keeping the column counter up to date every time e_com is
advanced and also reduces spread of code that has to know how many columns
a tab will produce.
Deduplicate code that decided if a comment needs a blank line at the top.
References:
d9fa3b481527185b4b33
Differential Revision: https://reviews.freebsd.org/D6966 (Partial)
Submitted by: Piotr Stefaniak
The original indent(1) described unix-style comments as similar to box
comments, except the first non-blank character on each line is lined up
with the '*' of the "/*" which appears on a line by itself.
The code has been turned off for ages and -sc/-nsc make it even
less relevant.
Reference:
89c5fe2c56
Differential Revision: https://reviews.freebsd.org/D6966 (Partial)
Submitted by: Piotr Stefaniak
'\n' was specifically added to -e arguments prior to r303047. Restore
historical behavior which in turn fixes usr.sbin/etcupdate/preworld_test:main .
The fix is being committed to address the issue in the short term and may be
iterated upon as noted in bug 211399
Discussed with: mi, pfg
Differential Revision: https://reviews.freebsd.org/D7368
PR: 195929, 211399 [*]
MFC after: 18 days
X-MFC with: r303047
Reported by: Jenkins
Sponsored by: EMC / Isilon Storage Division
Also increase the stack size still keeping a conservative value of 256.
This is based on a similar changes done for PostgreSQL which instead
uses a stack size of 1000.
Differential Revision: https://reviews.freebsd.org/D6966 (Partial)
Submitted by: Piotr Stefaniak (with changes)
This fixes a very visible issue that may be hidden by some indent.pro
settings as in the example from FreeBSD's /usr/share.
From Piotr's log:
____
To prevent losing tabs from indentation in declarations, FreeBSD indent's
r125624 added code for the most common case when it's an identifier that
is indented, but didn't do anything with the original code that did the
same for any other cases. The other cases are: lparens (function pointer
declaration), asterisks (pointer declaration), stray semicolons, and
commas leading identifiers instead of trailing them.
Use the code added in r125624 (and improved in later commits) to write a
new function indent_declaration() and use it in all places that meant to
indent declarations. In order to indent only once per line, reuse existing
ps.dumped_decl_indent variable that was only used when formatting for
troff (-troff) until now.
____
Reference:
ddd263db2a
Differential Revision: https://reviews.freebsd.org/D6966 (Partial)
Submitted by: Piotr Stefaniak
strchr(3) returns a pointer not a boolean.
Attempt to make the style somewhat more ocnsistent with what indent
had before recent changes.
Pointed out by: bde
Remove the excessive braces from r303485 and align the comments to the
right as done in the rest of the code. This is not nice but there is no
clear way to make it nice (and KNF).
Pointed out by: bde
Actually this just brings back r303487 with the correct commit log.
Differential Revision: https://reviews.freebsd.org/D6966 (Partial)
Obtained from: Piotr Stefaniak
This piece of code removed tabs and space characters from after colons
that follow labels by decrementing the e_lab (end of label) "pointer"
which is later used to calculate the width of the string that fprintf()
puts into "output". But pad_output() gets the length from the actual
string, so it miscalculated what the current column is.
Fixed by putting a string terminator at the e_lab "pointer".
Differential Revision: https://reviews.freebsd.org/D6966
(Partial)
Obtained from: Piotr Stefaniak
indent(1) simply wasn't taught that "else" may be followed by a comment
without any opening brace anywhere on the line, so it was very confused
in such cases.
Differential Revision: https://reviews.freebsd.org/D6966 (Partial)
Obtained from: Piotr Stefaniak
last_bl is a char pointer that tracks the last blank character in a
comment, which is used for wrapping long comment lines. Since the
underlying array may be reallocated, make sure last_bl is up to date when
that happens.
Differential Revision: https://reviews.freebsd.org/D6966 (Partial)
Obtained from: Piotr Stefaniak
dump_line() requires s_code to be a string, because it will call count_spaces().
Differential Revision: https://reviews.freebsd.org/D6966 (Partial)
Obtained from: Piotr Stefaniak
Pull a copy of the filename string before calling basename(). Change the
loop to not return on its own, so we can put a free() statement at the
bottom.
POSIX allows these functions to modify their input buffer, so that they
have storage for the return value. Pull copies of the filename before
calling these utility functions.
which is more efficient.
Note that for now we do not create a separate library for libdivsufsort
because it's not used anywhere else.
Obtained from: Chromium
MFC after: 2 months
A follow-up to r303099, D7255. Basically, apply the exact same change, with
the exact same rationale, to gcore. gcore's elfcore.c is largely a clone of
the kernel imgact_elf coredump facility.
Reviewed by: emaste (earlier version, not substantially different)
Requested by: jhb
Sponsored by: EMC / Isilon Storage Division
Differential Revision: https://reviews.freebsd.org/D7265
When threads were added to the kernel, the pr_pid member of the
NT_PRSTATUS note was repurposed to store LWP IDs instead of process
IDs. However, the process ID was no longer recorded in core dumps.
This change adds a pr_pid field to prpsinfo (NT_PRSINFO). Rather than
bumping the prpsinfo version number, note parsers can use the note's
payload size to determine if pr_pid is present.
Reviewed by: kib, emaste (older version)
MFC after: 2 months
Differential Revision: https://reviews.freebsd.org/D7117
This fixes a bug with link local addresses. This will require and
upcoming change in the kernel to bring SCTP to the same behaviour
as UDP and TCP.
MFC after: 3 days
with the corresponding entry in the table header.
r295136 increased the value width from 14 to 32 without the corresponding
change to the table header. This commit adds the change to the table
header width.
MFC after: 3 days
Fill in pr_psargs in the NT_PRSINFO ELF core dump note with command
line arguments.
Reviewed by: kib
Differential Revision: https://reviews.freebsd.org/D7116
Instead of changing the whole course to another POSIX-permitted way
for consistency and uniformity I decide to completely ignore missing
regex fucntionality and focus on fixing bugs in what we have now,
too many small obstacles we have choicing other way, counting ports.
Corresponding libc changes are backed out in r302824.
- Use varargs properly
- Use pid_t
- Better handling of error conditions on forked jobs.
- Some prototype and warning cleanups.
Obtained from: NetBSD (some originaly from OpenBSD)
Generally the first argument in calloc is supposed to stand for a count
and the second for a size. Try to make that consistent. While here,
attempt to make some use of the overflow detection capability in
calloc(3).
remove collation support for a-z ranges here too.
It was implemented for single byte locales only in any case.
2) Reduce [Cc]flag loop to WCHAR_MAX, WINT_MAX here includes WEOF which is
not a character.
3) Optimize [Cc]flag case: don't repeatedly add the last character of
string2 to squeeze cset when string2 reach its EOS state.
4) Reflect in the manpage that [=equiv=] is implemented for single
byte locales only.
Found by the Debian reproducible builds effort -- Debian bug 830259.
Reported by: Reiner Herrmann <reiner@reiner-h.de>
Approved by: re (gjb)
Sponsored by: The FreeBSD Foundation
The time in the output files was ahead by 3 hours on i386. Fix the incorrect
offset.
Differential Revision: https://reviews.freebsd.org/D7079 (as part of a larger diff)
MFC after: 1 week
PR: 210329
Reported by: asomers
Approved by: re (gjb)
Reviewed by: cem
Sponsored by: EMC / Isilon Storage Division
obtained output from lastcomm instead of just printing out a summary, e.g.
"they differed".
This will make failures with results more apparent when running kyua debug,
kyua report-html, etc.
Differential Revision: https://reviews.freebsd.org/D7079 (as part of a larger diff)
MFC after: 1 week
Approved by: re (gjb)
Reviewed by: cem
Sponsored by: EMC / Isilon Storage Division
usr.bin/lastcom/tests/Makefile
usr.sbin/sa/tests/Makefile
Set allow_architectures appropriately. These tests depend on golden
files that must be generated for each architecture, and haven't yet
been generated for all of them.
PR: 210566
PR: 204154
Reviewed by: ngie
Approved by: re (gjb)
MFC after: 4 weeks
Sponsored by: Spectra Logic Corp
Differential Revision: https://reviews.freebsd.org/D6960
* sctp46, tcp46, and udp46 sockets are displayed as such and not as
sctp4 6, tcp4 6, udp4 6. This bug was introduced in
http://svnweb.freebsd.org/base?view=revision&revision=187915
* For SCTP sockets, the the -4 and -6 flags are honoured as much as
possible. This means IPv4 sockets are handled correctly, IPv6
sockets are displayed as sctp46, since it is currently not possible
to distinguish between sctp6 and sctp46.
Approved by: re (gjb)
MFC after: 1 week
Otherwise gcore's ptrace attach operation can race with delivery of a
signal and cause it to be lost.
In collaboration with: Suraj Raju <sraju@isilon.com>
Reviewed by: bdrewery
Approved by: re (gjb, kib)
MFC after: 2 weeks
Sponsored by: EMC / Isilon Storage Division
Update libarchive to 3.2.1 (bugfix and security fix release)
List of vendor fixes:
- fix exploitable heap overflow vulnerability in Rar decompression
(vendor issue 719, CVE-2016-4302, TALOS-2016-0154)
- fix exploitable stack based buffer overflow vulnebarility in mtree
parse_device functionality (vendor PR 715, CVE-2016-4301, TALOS-2016-0153)
- fix exploitable heap overflow vulnerability in 7-zip read_SubStreamsInfo
(vendor issue 718, CVE-2016-4300, TALOS-2016-152)
- fix integer overflow when computing location of volume descriptor
(vendor issue 717)
- fix buffer overflow when reading a crafred rar archive (vendor issue 521)
- fix possible buffer overflow when reading ISO9660 archives on machines
where sizeof(int) < sizeof(size_t) (vendor issue 711)
- tar and cpio should fail if an input file named on the command line is
missing (vendor issue 708)
- fix incorrect writing of gnutar filenames that are exactly 512 bytes
long (vendor issue 682)
- allow tests to be run from paths that are equal or longer than 128
characters (vendor issue 657)
- add memory allocation errors in archive_entry_xattr.c (vendor PR 603)
- remove dead code in archive_entry_xattr_add_entry() (vendor PR 716)
- fix broken decryption of ZIP files (vendor issue 553)
- manpage style, typo and description fixes
Post-3.2.1 vendor fixes:
- fix typo in cpio version reporting (Vendor PR 725, 726)
- fix argument range of ctype functions in libarchive_fe/passphrase.c
- fix ctype use and avoid empty loop bodies in WARC reader
MFC after: 1 week
Security: CVE-2016-4300, CVE-2016-4301, CVE-2016-4302
Approved by: re (kib)
mkimg has had a number of functional additions after the last time the
version was incremented. Do so now, to r292082's commit date, so that
users can determine what is supported.
Reviewed by: marcel
Approved by: re (gjb)
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D6882
ar output is already deterministic by default for ar -q and ar -r, and
when invoked as ranlib. Make ar -s equivalent to ranlib and enable
deterministic output by default in that case too.
PR: 210330
Reviewed by: bdrewery
Approved by: re (gjb)
MFC after: 1 week
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D6871
The bsd.dep.mk yacc targets rely on only the .c file getting a .meta
file. However the previous code here relying on only the .h file meant
that it would be generated with a .meta file. r301285 made it so that
the .h file is never expected to get a .meta file. To keep this
restriction in place add in an extra dependency on the .c file so that
it is generated at this time. It's a hack but the best for the patterns
we have at the moment for handling build-tools and side-effect-generated
files.
Reported by: Mark Millard
Approved by: re (implicit)
Sponsored by: EMC / Isilon Storage Division
Rather than guarding close(fd) with an fd >= 0 test and setting fd
to -1 when it is closed to avoid a potential double-close, just
move the close() call after the conditional "goto make_token". This
moves the close() call totally outside the loop to avoid the
possibility of calling it twice. This should also prevent a Coverity
warning about checking fd for validity after it was previously passed
to read().
Reported by: Coverity
CID: 1355335
MFC after: 1 week
X-MFC with: r299484
mkimg(1) uses a swap file to back input file chunks. When the output file
is being written out, blocks of the swap file are mapped and their contents
copied. This causes the backing VM pages to enter the active queue, and when
the output file is large relative to system memory (as is generally the
case), can result in a shortfall of inactive memory. This causes the
pagedaemon to aggressively scan the active queue and swap out process
memory in an attempt to meet the shortfall. Because mkimg's input files
are typically the intermediate result of some build process, there's no
need to push them all through the active queue. Use madvise(2) to indicate
that the backing pages may be reclaimed in preference to active pages. In
the case of the swap file, these pages will be freed as soon as mkimg
exits anyway.
When using mkimg on a desktop-class system with large amounts of dirty
process memory, this change substantially improves mkimg runtime and
reduces swap usage.
Reviewed by: marcel
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D6654
discovery without attaching to the targets ("iscsictl -Ad ... -e off"),
and then attach to selected ones ("iscsictl -Mi ... -e on").
PR: 204129
MFC after: 1 month
Relnotes: yes
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D6633
Somehow the /usr/include path got lost in this particular case.
Just pass it along from --sysroot as was already done for
DIRDEPS_BUILD.
Sponsored by: EMC / Isilon Storage Division
In addition to the previous change I made to ar.c, pull in another
basename() related fix. This change is similar to the one made to the
ELF Toolchain version of ar, with the difference that the ELF Toolchain
version lacks error handling for the strdup() call.
Reviewed by: emaste
Differential Revision: https://reviews.freebsd.org/D6467
Summarizing the findings in the OpenBSD list:
This solves a reproduceable issue with very recent Mesa where REG_NOTBOL
combined with a match at the begin of the string causes our regex library
to treat the word as not begin of word.
Thanks to Martijn van Duren and Ingo Schwarze for taking the time to
solve this in the least invasive way.
PR: 209352, 209387
Taken from: openbsd-tech (Martijn van Duren)
MFC after: 1 month
st_mtim was being incorrectly described as "stime=", not "mtime=". This was
introduced with the original feature commit (r176471).
MFC after: 1 week
PR: 209699
Submitted by: naddy
Sponsored by: EMC / Isilon Storage Division
The density code and bits per mm values were obtained from an
actual drive density report.
The number of tracks were obtained from an LTO-7 hardware
announcement on IBM's web site.
Sponsored by: Spectra Logic
MFC after: 3 days
If basename() uses "char *", we shouldn't do the intermediate
assignment, as that field is of type "const char *". Simply call
basename() on the command line argument directly.
Reviewed by: emaste
Differential Revision: https://reviews.freebsd.org/D6463
This should fix the build on older stable/10, since install is a bootstrap
tool.
Pending a decision how to fix this properly, revert utimensat usage. Copies
with the -p option will again appear older than the original almost always,
but -p is not commonly used.
expand(). Never return the name parameter, which could be a the buf[]
buffer which is allocated on the stack by getdeadletter() and which
would then be used after getdeadletter() has returned.
Reported by: Coverity
CID: 1199383
MFC after: 1 week
memcpy() instead. It's probably a bit more optimal in this case
anyway. [1]
The program logic leading up to the creation of the strncpy/memcpy
destination buffer is a bit hairy. Add a call to assert() to make
it clear what is happening here and detect any potential buffer
overruns in the future.
Check a couple syscall error returns. Ignore the EEXIST error from
link() to preserve existing behavior. [2] [3]
Reported by: Coverity
CID: 1009659 [1], 1009349 [2], 1009350 [3]
Update libarchive to 3.2.0
New features:
- new bsdcat command-line utility
- LZ4 compression (in src only via external utility from ports)
- Warc format support
- 'Raw' format writer
- Zip: Support archives >4GB, entries >4GB
- Zip: Support encrypting and decrypting entries
- Zip: Support experimental streaming extension
- Identify encrypted entries in several formats
- New --clear-nochange-flags option to bsdtar tries to remove noschg and
similar flags before deleting files
- New --ignore-zeros option to bsdtar to handle concatenated tar archives
- Use multi-threaded LZMA decompression if liblzma supports it
- Expose version info for libraries used by libarchive
Patched files (fixed compiler warnings):
contrib/libarchive/cat/bsdcat.c (vendor PR #702)
contrib/libarchive/cat/bsdcat.h (vendor PR #702)
contrib/libarchive/libarchive/archive_read_support_format_mtree.c (PR #701)
contrib/libarchive/libarchive_fe/err.c (vendor PR #703)
MFC after: 1 month
Relnotes: yes
to ensure that the destination is NUL terminated. Length truncation
of one more character should not be an issue since encoding values
that long are not supported by libc. The destination string is
treated as a NUL terminated string, but it is only passed to strcmp()
for comparison to a set of shorter, fixed length strings, so this
is not a serious problem.
Reported by: Coverity
CID: 974769
MFC after: 1 week
In the case where a file lacks a trailing newline, there is some "evil" code to
reverse goto the tokenizing code ("make_token") for the final token in the
file. In this case, 'fd' is closed more than once. Use a negative sentinel
value to guard close(2), preventing the double close.
Ideally, this code would be restructured to avoid this ugly construction.
Reported by: Coverity
CID: 1006123
Sponsored by: EMC / Isilon Storage Division
Close the fd the poll error was detected on, rather than the last opened fd, to
fix the double-close.
Use -1 to make it explict which int variables no longer own socket file
descriptors.
Actually shrink, rather than grow, the poll timeout to match comment.
Reported by: Coverity
CID: 1304860, 1305616
Sponsored by: EMC / Isilon Storage Division
This logic was added to the whois() function in r281959, but could easily be
its own routine. In this case, I think the abstraction makes both functions
easier to reason about.
This precedes some Coverity-suggested cleanup.
Sponsored by: EMC / Isilon Storage Division
Use size of destination buffer, rather than a constant that may or may not
correspond to the source buffer, to restrict the length of copied strings. In
particular, pr_fname has 16+1 characters but MAXCOMLEN is 18+1.
Use strlcpy instead of strncpy to ensure the result is nul-terminated. This
seems to be what is expected of these fields.
Reported by: Coverity
CIDs: 1011302, 1011378
Sponsored by: EMC / Isilon Storage Division
In the presence of the --diff-pid argument, it is possible for 'diffpipe' to be
NULL. Only fclose() it if it was initialized.
Reported by: Coverity
CID: 1355183
Sponsored by: EMC / Isilon Storage Division
When getline(3) in 2009 was added a _WITH_GETLINE guard has also been added.
This rename is made in preparation for the removal of this guard
Obtained from: NetBSD
Simplify redundant malloc'ing in sed -e.
It is causing havoc in the ports tree:
===> Configuring for wxsvg-1.5.7
sed: 1: "/gcc_dir=\\`/s/gcc /$CC /": bad flag in substitute command: '/'
*** Error code 1
===> Patching for vips-8.3.1
sed: 1: "1s|^#![[:space:]]*/usr/ ...": bad flag in substitute command: 's'
*** Error code 1
PR: 195929
Reported by: danilo
When encountering an -e argument, sed currently mallocs a string to COPY
the optarg -- with '\n' appended. The appendage does not seem necessary --
indeed, the same call to add_compunit processing the sole command (given
without -e) passes the *argv verbatim: without making a copy, and without
appending newline.
This matches what is done in other BSDs.
Submitted by: Mikhail T.
PR: 195929
MFC after: 2 weeks
Rewrite the main loop of the "sed s/..." command, shortening it by ten
lines and simplifying it by removing the switch statement implementing
/g, /1, and /2 separately and repetitively.
This will be needed to bring a fix from OpenBSD later.
Obtained from: OpenBSD (schwarze CVS Rev. 1.18)
MFC after: 3 weeks
after r298107
Summary of changes:
- Replace all instances of FILES/TESTS with ${PACKAGE}FILES. This ensures that
namespacing is kept with FILES appropriately, and that this shouldn't need
to be repeated if the namespace changes -- only the definition of PACKAGE
needs to be changed
- Allow PACKAGE to be overridden by callers instead of forcing it to always be
`tests`. In the event we get to the point where things can be split up
enough in the base system, it would make more sense to group the tests
with the blocks they're a part of, e.g. byacc with byacc-tests, etc
- Remove PACKAGE definitions where possible, i.e. where FILES wasn't used
previously.
- Remove unnecessary TESTSPACKAGE definitions; this has been elided into
bsd.tests.mk
- Remove unnecessary BINDIRs used previously with ${PACKAGE}FILES;
${PACKAGE}FILESDIR is now automatically defined in bsd.test.mk.
- Fix installation of files under data/ subdirectories in lib/libc/tests/hash
and lib/libc/tests/net/getaddrinfo
- Remove unnecessary .include <bsd.own.mk>s (some opportunistic cleanup)
Document the proposed changes in share/examples/tests/tests/... via examples
so it's clear that ${PACKAGES}FILES is the suggested way forward in terms of
replacing FILES. share/mk/bsd.README didn't seem like the appropriate method
of communicating that info.
MFC after: never probably
X-MFC with: r298107
PR: 209114
Relnotes: yes
Tested with: buildworld, installworld, checkworld; buildworld, packageworld
Sponsored by: EMC / Isilon Storage Division
There are a couple of places in the source three where we call
basename() on constant strings. This is bad, because the prototype
standardized by POSIX allows the implementation to use its argument as a
storage buffer.
This change eliminates some of these unportable calls to basename() in
cases where it was only added for cosmetical reasons, namely to trim
argv[0]. There's nothing wrong with setting argv[0] to the full path.
Reviewed by: jilles
Differential Revision: https://reviews.freebsd.org/D6093
This contains only bug fixes, no new features. The repository format is
also unchanged from 1.9.2. Full list of changes between 1.9.4 and
earlier versions:
https://svn.apache.org/repos/asf/subversion/tags/1.9.4/CHANGES
Note that the two security issues fixed in 1.9.4 (CVE-2016-2167 and
CVE-2016-2168) do not affect the version of Subversion in the FreeBSD
base system, since neither SASL nor Apache modules are enabled.
Relnotes: yes
MFC after: 2 weeks
Import sdiff(1) from the diff version written by Raymond Lai,
improved during GSoC 2012 by Jesse Hagewood.
Compared to the version done in during that summer of code:
- Remove the zlib frontend: zsdiff
- Compatible output (column size and separators) with GNU sdiff
Compared to GNU sdiff in ports:
- The only difference is padding using spaces vs tabs
Compared to OpenBSD and NetBSD import:
- Implement missing options (including long options) from GNU sdiff
- Improved support for the edition mode (signal handling)
- Output visually compatible with GNU sdiff: size of columns
While here import regression tests from NetBSD adapted to fit the output as
expected by GNU sdiff
Reviewed by: emaste (in part)
Obtained from: OpenBSD, NetBSD, GSoC 2012
Relnotes: yes
Differential Revision: https://reviews.freebsd.org/D5981
Differential Revision: https://reviews.freebsd.org/D6032 (diff with NetBSD version)
Differential Revision: https://reviews.freebsd.org/D6033 (diff with OpenBSD version)
Fix a related typo while here.
Note, this change results in the Kyuafile inclusion in the runtime
package, which needs to be fixed, however addresses the PR as far
as I can tell in my tests.
PR: 209114
Submitted by: ngie
Sponsored by: The FreeBSD Foundation
o Split the compression across several worker threads. By default, "several"
matches number of CPUs, capped at 24 for sanity when running on a very big
hardwares. Provide option to set that number manually;
o Fix bug inherited from the mkulzma (R.I.P) which degraded already slow LZMA
compression even further by calling function to release compression state
after processing each block.
It is neither documented as required nor actually required by the LZMA
library. This caused spree of system calls to release memory and then map
it again for every block. LZMA compression is more than 2x faster after this
change alone;
o Record time it takes to do compression and report throughput achieved.
o Add simple first-level 256 entry hash table for de-dup code, so it's not
becoming a bottleneck at big files.
It's provided by sys.mk so there's no need to derive it from ${.CURDIR}.
Suggested by: ngie
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D5998
- notionally support a 'history file' flag. This doesn't do much now,
but is there to prevent scripts written against GNU units from
breaking
- correctly gracefully quit rather than exit (this will make it easier
to support a history file in the future)
- remove the "t" flag from fopen which was there to support windows. We
have not supported windows since at the latest, the introduction of
capsicum.
mklocale and colldef has been replaced by localedef, but they have to be kept
until 10.2 is EOL for mklocale (it has been added to 10.3 as a bootstrap tools)
and until 10.3 is EOL for colldef (it has never been added to bootstrap tools)
This avoids 'build command changed' due to CFLAGS/CC changes during the
normal build. Without this the build-tools targets end up rebuilding
for the *target* rather than keeping the native versions built in
build-tools.
Sponsored by: EMC / Isilon Storage Division
This is rather ugly, because the RIPE and APNIC whois servers do
not provide referrals for address blocks that they do not manage.
However ARIN is usually the right place or knows the right place
so we try there.
The particular instance which clued me in to this bug is U.Mich.
141.211.0.0/16 for which the referral chain should be IANA ->
RIPE -> ARIN. RIPE's RDAP does provide useful redirects (for
example try `curl -I http://rdap.db.ripe.net/ip/141.211.0.0)
so maybe their whois server can be improved.
AfriNIC's whois server gives more direct referrals, but they are
designed to be human-readable. Ugly, but we can manage.
The issue of referrals between RIRs is likely to become more important
in the future whith the increasing number of cross-region IP address
block transfers increases.
This matches with uudecode's -r option to decode raw data without initial and
final framing lines.
$ echo Test | uuencode -mr - | uudecode -mr
Test
Approved by: cognet
MFC after: 1 week
for limiting disk (actually filesystem) IO.
Note that in some cases these limits are not quite precise. It's ok,
as long as it's within some reasonable bounds.
Testing - and review of the code, in particular the VFS and VM parts - is
very welcome.
MFC after: 1 month
Relnotes: yes
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D5080
This appears to be implementation dependent but convenient and makes
our sed behave more like GNU sed.
Given that it is not the historic behavior, bump FreeBSD_version
should userland/ports somehow depend on it.
Obtained from: NetBSD (bin/49872)
Reviewed by: bdrewery
PR: 208554
Merge after: NEVER
