Initialize %ds, %es, and %fs during CPU startup. Otherwise a garbage
value could leak to a 32-bit process if a process migrated to a different
CPU after exec and the new CPU had never exec'd a 32-bit process.
A more complete fix is needed, but this mitigates the most frequent
manifestations.
Obtained from: ups
it's non-NULL, as all callers can and should already do the required
checking. Update comments a bit more to talk about rawcb allocation
for consumers.
Reviewed by: bz
MFC after: 3 weeks
it in detail.
When setting media, don't error out when a specific media is selected.
# Note: There may be some issues still here since the EtherJet PC Card doesn't
# conform to the datasheet. Many different kinds of dongles can be plugged in
# and it is unknown how to ask which one it is.
Also, add a /* bad! */ comment to a 1/2 second delay after we set the
DC/DC parameters. This should be a *sleep of some sort for !cold.
Fortunately it is the only one and is only used when setting media, so
the benefit from removing it is small. Unfortunately, it likely
serves as an exemplar of good programming techniques, which it isn't.
2) Adds some __UserSpace__ on some of the common defines that
the user space code needs
3) Fixes a bug when we send up data to a user that failed. We
need to a) trim off the data chunk headers, if present, and
b) make sure the frag bit is communicated properly for the
msgs coming off the stream queues... i.e. we see if some
of the msg has been taken.
Obtained from: jeli contributed the VIMAGE changes on this pass Thanks Julain!
socket support. These utility routines are used only for routing and
pfkey sockets, neither of which have a notion of address, so were
required to mock up fake socket addresses to avoid connection
requirements for applications that did not specify their own fake
addresses (most of them).
Quite a bit of the removed code is #ifdef notdef, since raw sockets
don't support bind() or connect() in practice. Removing this
simplifies the raw socket implementation, and removes two (commented
out) uses of dtom(9).
Fake addresses passed to sendto(2) by applications are ignored for
compatibility reasons, but this is now done in a more consistent way
(and with a comment). Possibly, EINVAL could be returned here in
the future if it is determined that no applications depend on the
semantic inconsistency of specifying a destination address for a
protocol without address support, but this will require some amount
of careful surveying.
NB: This does not affect netinet, netinet6, or other wire protocol
raw sockets, which provide their own independent infrastructure with
control block address support specific to the protocol.
MFC after: 3 weeks
Reviewed by: bz
when it worked as generic IDE.
PR: 125422
Submitted by: Andrey V. Elsukov <bu7cher at yandex dot ru>
Approved by: imp (mentor, implicit)
MFC after: 1 week
generation of RTL810x PCIe fast ethernet controller. Note, Tx/Rx
descriptor format is different from that of first generation of
RTL8101E series. Jumbo frame is not supported for RTL810x
family.
Tested by: NAGATA Shinya ( maya AT negeta DOT com )
mutexes and replacing the obsolete if_watchdog interface. The ndis_ticktask
function calls into ieee80211_new_state under one condition with NDIS_LOCK
held. The ieee80211_new_state would call into ndis_start in some cases too,
resulting in the occasional case where ndis_start acquires NDIS_LOCK from
inside the NDIS_LOCK held by ndis_ticktask.
Obtained from: Paul B. Mahol <onemda@gmail.com>
MFC after: 1 week
page directory pages from VM_MIN_KERNEL_ADDRESS through the end of the
kernel's bss. Specifically, the dependence was in pmap_growkernel()'s one-
time initialization of kernel_vm_end, not in its main body. (I could not,
however, resist the urge to optimize the main body.)
Reduce the number of preallocated page directory pages to just those needed
to support NKPT page table pages. (In fact, this allows me to revert a
couple of my earlier changes to create_pagetables().)
page table pages have to be preallocated ...'', violates an assumption made
by minidumpsys(): kernel_vm_end is the highest virtual address that has ever
been used by the kernel. Now, however, the kernel code, data, and bss may
reside at addresses beyond kernel_vm_end. This revision modifies the upper
bound on minidumpsys()'s two page table traversals to account for this
possibility.
Use the new inline function in ia64_invalidate_icache().
While there, add proper synchronization so that we know
the fc.i instructions have taken effect when we return.
to vm_page_alloc() instead of VM_ALLOC_SYSTEM. VM_ALLOC_SYSTEM was the
logical choice before FreeBSD 7.0 because VM_ALLOC_INTERRUPT could not
reclaim a cached page. Simply put, there was no ordering between
VM_ALLOC_INTERRUPT and VM_ALLOC_SYSTEM as to which "dug deeper" into the
cache and free queues. Now, there is; VM_ALLOC_INTERRUPT dominates
VM_ALLOC_SYSTEM.
While I'm here, teach pmap_growkernel() to request a prezeroed page.
MFC after: 1 week
inpcb. When directly invoking udp_notify() from udp_ctlinput(), acquire
only a read lock; we may still see write locks in udp_notify() as the
in_pcbnotifyall() routine is shared with TCP and always uses a write lock
on the inpcb being notified.
MFC after: 1 month
some code paths, global or inpcb write locks are required, but for other
code paths, read locks or no locking at all are sufficient for the data
structures.
MFC after: 1 month
source or a specific destination address is requested as part of a send
on a UDP socket, read lock the inpcb rather than write lock it. This
will allow fully parallel transmit down to the IP layer when sending
simultaneously from multiple threads on a connected UDP socket.
Parallel transmit for more complex cases, such as when sendto(2) is
invoked with an address and there's already a local binding, will
follow.
MFC after: 1 month
the syscall code and acquires various event subsystem locks as needed.
The handling of the NOTE_TRACK for EVFILT_PROC is currently done by
calling the kqueue_register() from filt_proc() filter, causing recursive
entrance of the kqueue code. This results in the LORs and recursive
acquisition of the locks.
Implement the variant of the knote() function designed to only handle
the fork() event. It mostly copies the knote() body, but also handles
the NOTE_TRACK, removing the handling from the filt_proc(), where it
causes problems described above. The function is called from the fork1()
instead of knote().
When encountering NOTE_TRACK knote, it marks the knote as influx
and drops the knlist and kqueue lock. In this context call to
kqueue_register is safe from the problems.
An error from the kqueue_register() is reported to the observer as
NOTE_TRACKERR fflag.
PR: 108201
Reviewed by: jhb, Pramod Srinivasan <pramod juniper net> (previous version)
Discussed with: jmg
Tested by: pho
MFC after: 2 weeks
just like BIOCSETF but it doesn't drop all the packets buffered on
the discriptor and reset the statistics.
Also, when setting the write filter, don't drop packets waiting to
be read or reset the statistics.
PR: 118486
Submitted by: Matthew Luckie <mluckie@cs.waikato.ac.nz>
MFC after: 1 month
KQ_FLUX_WAKEUP(). Since the later macro clears the KQ_FLUXWAIT, the
kqueue_scan() thread may be not woken up.
Move the setting of KQ_FLUXWAIT after wakeup to correct the issue.
Reported and tested by: pho
MFC after: 3 days
level. The distinction was artificial. Some more movement around the
deck charis is likely depending on the fallout from this one.
Paths were corrected after the svn mv. Hope that's OK.
appropriate (versions not appropriate to merge omitted):
o 1.226 imp nop, save for NetBSD string (minor merging the other way)
o 1.225 jnemeth Coreage LAPCCTXD
o 1.224 martin (remove 3rd and 4th clauses)
o 1.223 kiyohara (TDK bluetooth PC Card)
o 1.222 kiyohara (Anycom BlueCard)
o 1.221 ichiro (NEC Infrontia AX420N)
o 1.219 jmcneill (EDIMAX EP-4101)
o 1.213 tsutsui (TEAC IDECARDII entry fix)
Also, while I'm here, fix some tab problems that have crept in.
Our hook creates the sysctl node before root is mounted, but after cpu
is probed. It seems that k8temp can be loaded before the cpu module and,
in those cases, dev.cpu.0.temperature was not created.
PR: 124939
