Commit Graph

1134 Commits

Author SHA1 Message Date
Andrey A. Chernov
a0036d23a6 Turn uio_resid/uio_offset comments into KASSERTs
Reviewed by:    bde
2004-01-27 11:28:38 +00:00
Andrey A. Chernov
51cf017614 Copy comment about caller check from ffs_read to ffs_extread, don't
check for uio_resid < 0 here too.
2004-01-23 06:00:41 +00:00
Andrey A. Chernov
070f8eefb1 Fix various panic() strings to reflect true function name to allow
easy grep.
Small code reorganization to look more logic.
Copy ffs_write check from prev. commit to ffs_extwrite.
2004-01-23 05:52:31 +00:00
Andrey A. Chernov
bd0cc17757 ffs_read:
Replace wrong check returned EFBIG with EOVERFLOW handling from POSIX:

36708 [EOVERFLOW] The file is a regular file, nbyte is greater than 0, the
starting position is before the end-of-file, and the starting position is
greater than or equal to the offset maximum established in the open file
description associated with fildes.

ffs_write:
Replace u_int64_t cast with uoff_t cast which is more natural for types
used.

ffs_write & ffs_read:
Remove uio_offset and uio_resid checks for negative values, the caller
supposed to do it already. Add comments about it.

Reviewed by:    bde
2004-01-23 05:38:02 +00:00
Alexander Kabaev
6bd39fe978 Spell magic '16' number as IO_SEQSHIFT. 2004-01-19 20:03:43 +00:00
Alexander Kabaev
291027ce9c Avoid calling vprint on a vnode while holding its interlock mutex.
Move diagnostic printf after vget. This might delay the debug
output some, but at least it keeps kernel from exploding if
DEBUG_VFS_LOCKS is in effect.
2004-01-04 04:08:34 +00:00
Don Lewis
31c81e4bed Set fs_ronly to the correct value in ffs_reload() when reloading the file
system super block after fsck has repaired the file system.  The value of
fs_ronly was getting overwritten, which caused ffs_update() to attempt to
update inode timestamps even though the file system was still mounted
read-only.

This fixes the "giving up on N buffers" error that is triggered by running
fsck on the root file system and then rebooting without mounting the file
system read-write.
2003-12-07 05:16:52 +00:00
Wes Peters
ec52df8eb9 Write the UFS2 superblock with a 'BAD' magic number at the beginning
of newfs, to signify the newfs operation has not yet completed.  Re-
write the superblock with the correct magic number once all of the
cylinder groups have been created to show the operation has finished.

Sponsored by:	St. Bernard Software
2003-11-16 07:08:27 +00:00
Poul-Henning Kamp
00cbe31bd8 Send B_PHYS out to pasture, it no longer serves any function. 2003-11-15 09:28:09 +00:00
Alan Cox
c78b8dfacf Call free(9) after the vnode interlock is released, avoiding a lock-order
reversal.
2003-11-13 03:56:32 +00:00
Kirk McKusick
fde81c7d8e Update the statfs structure with 64-bit fields to allow
accurate reporting of multi-terabyte filesystem sizes.

You should build and boot a new kernel BEFORE doing a `make world'
as the new kernel will know about binaries using the old statfs
structure, but an old kernel will not know about the new system
calls that support the new statfs structure. Running an old kernel
after a `make world' will cause programs such as `df' that do a
statfs system call to fail with a bad system call.

Reviewed by:	Bruce Evans <bde@zeta.org.au>
Reviewed by:	Tim Robbins <tjr@freebsd.org>
Reviewed by:	Julian Elischer <julian@elischer.org>
Reviewed by:	the hoards of <arch@freebsd.org>
Sponsored by:   DARPA & NAI Labs.
2003-11-12 08:01:40 +00:00
Alexander Kabaev
ca430f2e92 Remove mntvnode_mtx and replace it with per-mountpoint mutex.
Introduce two new macros MNT_ILOCK(mp)/MNT_IUNLOCK(mp) to
operate on this mutex transparently.

Eventually new mutex will be protecting more fields in
struct mount, not only vnode list.

Discussed with: jeff
2003-11-05 04:30:08 +00:00
Alexander Kabaev
45d45c6cde Use VOP_UNLOCK/vrele instead of vput. td was erecived as a parameter
and one cannot be sure it is equal to curthread.
2003-11-03 04:46:19 +00:00
Alexander Kabaev
cb9ddc80ae Take care not to call vput if thread used in corresponding vget
wasn't curthread, i.e. when we receive a thread pointer to use
as a function argument. Use VOP_UNLOCK/vrele in these cases.

The only case there td != curthread known at the moment is
boot() calling sync with thread0 pointer.

This fixes the panic on shutdown people have reported.
2003-11-02 04:52:53 +00:00
Alexander Kabaev
492c1e68fb Temporarily undo parts of the stuct mount locking commit by jeff.
It is unsafe to hold a mutex across vput/vrele calls.

This will be redone when a better locking strategy is agreed upon.

Discussed with: jeff
2003-11-01 05:51:54 +00:00
Don Lewis
9f206707a5 Tweak the calculation of minbfree in ffs_dirpref() so that only
those cylinder groups that have at least 75% of the average free
space per cylinder group for that file system are considered as
candidates for the creation of a new directory.  The previous formula
for minbfree would set it to zero if the file system was more than
75% full, which allowed cylinder groups with no free space at all
to be chosen as candidates for directory creation, which resulted
in an expensive search for free blocks for each file that was
subsequently created in that directory.

Modify the calculation of minifree in the same way.

Decrease maxcontigdirs as the file system fills to decrease the
likelyhood that a cluster of directories will overflow the available
space in a cylinder group.

Reviewed by:	mckusick
Tested by:	kmarx@vicor.com
MFC after:	2 weeks
2003-10-31 07:25:06 +00:00
John Baldwin
787f162df6 Move the P_COWINPROGRESS flag from being a per-process p_flag to being a
per-thread td_pflag which doesn't require any locks to read or write as it
is only read or written by curthread on itself.

Glanced at by:	mckusick
2003-10-23 21:14:08 +00:00
Tor Egge
f0da6ec99b Initialize bp->b_offset to the physical offset in partition
so GEOM knows where to read from disk.
2003-10-22 18:57:59 +00:00
Poul-Henning Kamp
2c18019f14 DuH!
bp->b_iooffset (the spot on the disk), not bp->b_offset (the offset in
the file)
2003-10-18 14:10:28 +00:00
Poul-Henning Kamp
4e1694ecaf Initialize bp->b_offset before calling VOP_[SPEC]STRATEGY() 2003-10-18 11:16:33 +00:00
Kirk McKusick
bd189c8c3e When expunging unlinked files from a snapshot, skip over holes in the
file rather than panicing with "indiracct: botched params".

Submitted by:	Mark Santcroos <marks@ripe.net>
2003-10-17 13:57:58 +00:00
Jeff Roberson
a844eb934c - My last commit to this file is still not safe, I believe that it may be
due to the recursion in indir_trunc().
2003-10-06 03:28:03 +00:00
Jeff Roberson
8af6a57099 - Reinstate 1.142 this was fixed by 1.144. 2003-10-06 02:39:37 +00:00
Jeff Roberson
69b609a85d - The VCHR case in ffs_sync() is an unneccsary optimization especially
considering how infrequently we access devices via ffs now that we have
   devfs.   Collapse this case with the other case.

Obtained from:	bde
2003-10-05 22:56:33 +00:00
Jeff Roberson
ab1f917b53 - Further simplify ffs_sync(). The vnode lock is required for UFS_UPDATE()
so make the code slightly more uniform.  The vnode lock is acquired in
   all cases and now the only difference between VCHR and other is we
   call UFS_UPDATE instead of VOP_FSYNC().
2003-10-05 09:42:24 +00:00
Jeff Roberson
cffa37d466 - In ffs_update() assert that either the vnode lock or the XLOCK is held. 2003-10-05 09:39:02 +00:00
Jeff Roberson
2f05568aa8 - Check the XLOCK before inspecting v_data.
- Slightly rewrite the fsync loop to be more lock friendly.  We must
   acquire the vnode interlock before dropping the mnt lock.  We must
   also check XLOCK to prevent vclean() races.
 - Use LK_INTERLOCK in the vget() in ffs_sync to further prevent vclean()
   races.
 - Use a local variable to store the results of the nvp == TAILQ_NEXT
   test so that we do not access the vp after we've vrele()d it.
 - Add an XXX comment about UFS_UPDATE() not being protected by any lock
   here.  I suspect that it should need the VOP lock.
2003-10-05 07:16:45 +00:00
Jeff Roberson
53938b4a86 - Skip over xvp if XLOCK is set. 2003-10-05 06:48:37 +00:00
Jeff Roberson
5c014b9d6d - Don't cache_purge() in ufs_reclaim. vclean() does it for us so
this is redundant.
2003-10-05 02:45:00 +00:00
Alan Cox
ccf78b6895 Synchronize access to a vm page's valid field using the containing
vm object's lock.
2003-10-04 20:38:32 +00:00
Jeff Roberson
cac3558da3 - The VI assert in getdirtybuf() is only valid if we're not on a VCHR
vnode.  VCHR vnodes don't do background writes.

Reported by:	kan
2003-10-04 15:57:05 +00:00
Jeff Roberson
04a17687ea - Increase the scope of the interlock in ffs_reload(). Acquire it before
we release the mntvnode_mtx.
 - Call vgonel() directly instead of going through vrecycle() since we own
   the interlock now.
 - Remove a few cases where we locked the interlock just so that we could
   call VOP_UNLOCK with interlock held.
2003-10-04 14:27:49 +00:00
Jeff Roberson
934914d2ef - Fix an unlocked call to GETATTR by slightly shuffling the code in
ffs_snapshot() around.
 - Acquire the interlock before releasing the mntvnode_mtx.  Use the
   interlock to protect v_usecount access.
2003-10-04 14:25:45 +00:00
Jeff Roberson
90e1659e41 - Use the VI_LOCK macro in two places where we directly called mtx_lock()
before.  Direct calls indicated places that needed review and these have
   now been reviewed.
2003-10-04 14:03:28 +00:00
Jeff Roberson
8f2e9e4388 - Properly acquire the vnode interlock before releasing the
mntvnode_mtx.
 - Use a local variable to store the results of the test to see if the
   next vnode on the mount list has changed.  This is so that we no longer
   acess the vnode after we vput() it.
2003-10-04 14:02:32 +00:00
Jeff Roberson
04c81ad83c - Remove a mp_fixme() and some locks that weren't necessary. I now
understand how this works.
2003-10-04 11:06:43 +00:00
Jeff Roberson
cfd5600c66 - Several of the callers to getdirtybuf() were erroneously changed to pass
in a list head instead of a pointer to the first element at the time of
   the first call.  These lists are subject to change, and getdirtybuf()
   would refetch from the wrong list in some cases.

Spottedy by:	tegge
Pointy hat to:	me
2003-09-03 04:08:15 +00:00
Jeff Roberson
23efe6dafc - Backout rev 1.142. This caused a deadlock that I do not understand. More
investigation is required.
2003-08-31 11:26:52 +00:00
Jeff Roberson
d919a11d06 - Define a new flag for getblk(): GB_NOCREAT. This flag causes getblk() to
bail out if the buffer is not already present.
 - The buffer returned by incore() is not locked and should not be sent to
   brelse().  Use getblk() with the new GB_NOCREAT flag to preserve the
   desired semantics.
2003-08-31 08:50:11 +00:00
Jeff Roberson
a0ebaaddef - Don't acquire the vnode interlock in drain_output(). Instead, require the
caller to acquire it.  This permits drain_output() to be done atomically
   with other operations as well as reducing the number of lock operations.
 - Assert that the proper locks are held in drain_output().
 - Change getdirtybuf() to accept a mutex as an argument.  This mutex is used
   to protect the vnode's buf list and the BKGRDWAIT flag.  This lock is
   dropped when we successfully acquire a buffer and held on return
   otherwise.  These semantics reduce the number of cumbersome cases in
   calling code.
 - Pass the mtx from getdirtybuf() into interlocked_sleep() and allow this
   mutex to be used as the interlock argument to BUF_LOCK() in the LOCKBUF
   case of interlocked_sleep().
 - Change the return value of getdirtybuf() to be the resulting locked buffer
   or NULL otherwise.  This is for callers who pass in a list head that
   requires a lock.  It is necessary since the lock that protects the list
   head must be dropped in getdirtybuf() so that we don't have a lock order
   reversal with the buf queues lock in bremfree().
 - Adjust all callers of getdirtybuf() to match the new semantics.
 - Add a comment in indir_trunc() that points at unlocked access to a buf.
   This may also be one of the last instances of incore() in the tree.
2003-08-31 07:29:34 +00:00
Jeff Roberson
9dbfeb0ae6 - Move BX_BKGRDWAIT and BX_BKGRDINPROG to BV_ and the b_vflags field.
- Surround all accesses of the BKGRD{WAIT,INPROG} flags with the vnode
   interlock.
 - Don't use the B_LOCKED flag and QUEUE_LOCKED for background write
   buffers.  Check for the BKGRDINPROG flag before recycling or throwing
   away a buffer.  We do this instead because it is not safe for us to move
   the original buffer to a new queue from the callback on the background
   write buffer.
 - Remove the B_LOCKED flag and the locked buffer queue.  They are no longer
   used.
 - The vnode interlock is used around checks for BKGRDINPROG where it may
   not be strictly necessary.  If we hold the buf lock the a back-ground
   write will not be started without our knowledge, one may only be
   completed while we're not looking.  Rather than remove the code, Document
   two of the places where this extra locking is done.  A pass should be
   done to verify and minimize the locking later.
2003-08-28 06:55:18 +00:00
Alan Cox
9cf8f2f707 The previous change necessitates the addition of a new #include. Otherwise,
there is a compilation warning.
2003-08-18 17:27:08 +00:00
Poul-Henning Kamp
b103854847 Don't use a VOP_*() function on our own vnodes, go directly to the
relevant internal function, in this case ufs_bmaparray().
2003-08-17 19:26:03 +00:00
Alan Cox
f6c098e569 Revision 1.44 of ufs/ufs/inode.h has made it necessary to add two new
#includes to this file.  Otherwise, it doesn't compile.
2003-08-16 06:15:17 +00:00
Poul-Henning Kamp
5c24d6ee26 Eliminate the i_devvp field from the incore UFS inodes, we can
get the same value from ip->i_ump->um_devvp.

This saves a pointer in the memory copies of inodes, which can
easily run into several hundred kilobytes.

The extra indirection is unmeasurable in benchmarks.

Approved by:	mckusick
2003-08-15 20:03:19 +00:00
John Baldwin
8b149b5131 Consistently use the BSD u_int and u_short instead of the SYSV uint and
ushort.  In most of these files, there was a mixture of both styles and
this change just makes them self-consistent.

Requested by:	bde (kern_ktrace.c)
2003-08-07 15:04:27 +00:00
Robert Watson
2495048579 Now that the central POSIX.1e ACL code implements functions to
generate the inode mode from a default ACL and creation mask,
implement ufs_sync_inode_from_acl() using acl_posix1e_newfilemode().

Since ACL_OVERRIDE_MASK/ACL_PRESERVE_MASK are defined, we no
longer need to explicitly pass in a "preserve_mask" field: this
is implicit in the use of POSIX.1e semantics.

Note: this change contains a semantic bugfix for new file creation:
we now intersect the ACL-generated mode and the cmode requested by
the user process.  This means permissions on newly created file
objects will now be more conservative.  In the future, we may want
to provide alternative semantics (similar to Solaris and Linux) in
which the ACL mask overrides the umask, permitting ACLs to broaden
the rights beyond the requested umask.

PR:		50148
Reported by:	Ritz, Bruno <bruno_ritz@gmx.ch>
Obtained from:	TrustedBSD Project
2003-08-04 03:29:13 +00:00
Robert Watson
7942b925b8 In ufs_chmod(), use privilege only when required in the following
cases:

- Setting sticky bit on non-directory
- Setting setgid on a file with a group that isn't in the effective
  or extended groups of the authorizing credential

I.e., test the requirement first, then do the privilege test,
rather than doing the privilege test regardless of the need for
privilege.

Obtained from:	TrustedBSD Project
Sponsored by:	DARPA, Network Associates Laboratories
2003-08-04 00:31:01 +00:00
Robert Watson
9080ff25cf Rename VOP_RMEXTATTR() to VOP_DELETEEXTATTR() for consistency with the
kernel ACL interfaces and system call names.

Break out UFS2 and FFS extattr delete and list vnode operations from
setextattr and getextattr to deleteextattr and listextattr, which
cleans up the implementations, and makes the results more readable,
and makes the APIs more clear.

Obtained from:	TrustedBSD Project
Sponsored by:	DARPA, Network Associates Laboratories
2003-07-28 18:53:29 +00:00
Poul-Henning Kamp
7c89f162bc Add fdidx argument to vn_open() and vn_open_cred() and pass -1 throughout. 2003-07-27 17:04:56 +00:00