Features by CPUID as CPUID.80000008H:EAX[7:0], into variable cpu_maxphyaddr.
Reviewed by: alc
Tested by: pho
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
code in sys/kern/kern_dump.c. Most dumpsys() implementations are nearly
identical and simply redefine a number of constants and helper subroutines;
a generic implementation will make it easier to implement features around
kernel core dumps. This change does not alter any minidump code and should
have no functional impact.
PR: 193873
Differential Revision: https://reviews.freebsd.org/D904
Submitted by: Conrad Meyer <conrad.meyer@isilon.com>
Reviewed by: jhibbits (earlier version)
Sponsored by: EMC / Isilon Storage Division
emulated or when the vcpu incurs an exception. This matches the CPU behavior.
Remove special case code in HLT processing that was clearing the interrupt
shadow. This is now redundant because the interrupt shadow is always cleared
when the vcpu is resumed after an instruction is emulated.
Reported by: David Reed (david.reed@tidalscale.com)
MFC after: 2 weeks
may also halt in C2 and not just C3 (it seems that in some cases the BIOS
advertises its C3 state as a C2 state in _CST). Just play it safe and
disable both C2 and C3 states if a user forces the use of the TSC as the
timecounter on such CPUs.
PR: 192316
Differential Revision: https://reviews.freebsd.org/D1441
No objection from: jkim
MFC after: 1 week
physical address zero. Assume that the lowest page is always mapped
by direct map.
This restores access to the page at zero through /dev/mem after
r263475.
Reported and tested by: neel
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
managing pages from different address ranges. Generally speaking, this
feature is used to increase the likelihood that physical pages are
available that can meet special DMA requirements or can be accessed through
a limited-coverage direct mapping (e.g., MIPS). However, prior to this
change, the configuration of the free lists was static, i.e., it was
determined at compile time. Consequentally, free lists could be created
for address ranges that held no actual pages, for example, on 32-bit MIPS-
based systems with 512 MB or less of physical memory. This change makes
the creation of the free lists dynamic, i.e., it is based on the available
physical memory at boot time.
On 64-bit x86-based systems with 64 GB or more of physical memory, create
free lists for managing pages with physical addresses below 4 GB. This
change is to address reported problems with initializing devices that
require the allocation of physical pages below 4 GB on some systems with
128 GB or more of physical memory.
PR: 185727
Differential Revision: https://reviews.freebsd.org/D1274
Reviewed by: jhb, kib
MFC after: 3 weeks
Sponsored by: EMC / Isilon Storage Division
vm_inject_exception(). This fixes the issue that 'exception.cpuid' is
uninitialized when calling 'vm_inject_exception()'.
However, in practice this change is a no-op because vm_inject_exception()
does not use 'exception.cpuid' for anything.
Reported by: Coverity Scan
CID: 1261297
MFC after: 3 days
The new RTC emulation supports all interrupt modes: periodic, update ended
and alarm. It is also capable of maintaining the date/time and NVRAM contents
across virtual machine reset. Also, the date/time fields can now be modified
by the guest.
Since bhyve now emulates both the PIT and the RTC there is no need for
"Legacy Replacement Routing" in the HPET so get rid of it.
The RTC device state can be inspected via bhyvectl as follows:
bhyvectl --vm=vm --get-rtc-time
bhyvectl --vm=vm --set-rtc-time=<unix_time_secs>
bhyvectl --vm=vm --rtc-nvram-offset=<offset> --get-rtc-nvram
bhyvectl --vm=vm --rtc-nvram-offset=<offset> --set-rtc-nvram=<value>
Reviewed by: tychon
Discussed with: grehan
Differential Revision: https://reviews.freebsd.org/D1385
MFC after: 2 weeks
OpenBSD guests always enable "special mask mode" during boot. As a result of
r275952 this is flagged as an error and the guest cannot boot.
Reviewed by: grehan
Differential Revision: https://reviews.freebsd.org/D1384
MFC after: 1 week
setting call gate, which must be 64 bit, put a code segment descriptor
into ldt slot 0.
This way, syscall shim does not switch temporary to 64bit trampoline,
and does not create a window where signal delivery interrupts 64 bit
mode (signal handler cannot return). The cost is shim running with
non-zero based segment in %cs, which requires vfork() handling make
more assumptions.
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
It's redundant at the moment since it can be obtained from the trapframe
on the architectures where DTrace is supported, but this won't be the case
with ARM.
"hw.vmm.trace_guest_exceptions". To enable this feature set the tunable
to "1" before loading vmm.ko.
Tracing the guest exceptions can be useful when debugging guest triple faults.
Note that there is a performance impact when exception tracing is enabled
since every exception will now trigger a VM-exit.
Also, handle machine check exceptions that happen during guest execution
by vectoring to the host's machine check handler via "int $18".
Discussed with: grehan
MFC after: 2 weeks
- implement 8259 "polled" mode.
- set 'atpic->sfn' if bit 4 in ICW4 is set during master initialization.
- report error if guest tries to enable the "special mask" mode.
Differential Revision: https://reviews.freebsd.org/D1328
Reviewed by: tychon
Reported by: grehan
Tested by: grehan
MFC after: 1 week
Initialize the 8259 such that IRQ7 is the lowest priority.
Reviewed by: tychon
Differential Revision: https://reviews.freebsd.org/D1322
MFC after: 1 week
When returning to usermode, the handler for that exceptions is also
executed with wrong gs base. Handle all three possible faults in the
same way, checking for iret fault, and performing full iret.
Sponsored by: The FreeBSD Foundation
MFC after: 3 days
is deasserted. Prior to this change each assertion on a level triggered irq
pin resulted in two interrupts being delivered to the CPU.
Differential Revision: https://reviews.freebsd.org/D1310
Reviewed by: tychon
MFC after: 1 week
WITNESS and INVARIANTS checking, which are known to have significant
performance impact on running systems. When benchmarking new features
this kernel should be used instead of the standard GENERIC.
This kernel configuration should never appear outside of the HEAD
of the FreeBSD tree.
using the VM_MIN_ADDRESS constant.
HardenedBSD redefines VM_MIN_ADDRESS to be 64K, which results in
bhyve VM startup failing. Guest memory is always assumed to start
at 0 so use the absolute value instead.
Reported by: Shawn Webb, lattera at gmail com
Reviewed by: neel, grehan
Obtained from: Oliver Pinter via HardenedBSD
23bd719ce1
MFC after: 1 week
- Dump an NT_X86_XSTATE note if XSAVE is in use. This note is designed
to match what Linux does in that 1) it dumps the entire XSAVE area
including the fxsave state, and 2) it stashes a copy of the current
xsave mask in the unused padding between the fxsave state and the
xstate header at the same location used by Linux.
- Teach readelf() to recognize NT_X86_XSTATE notes.
- Change PT_GET/SETXSTATE to take the entire XSAVE state instead of
only the extra portion. This avoids having to always make two
ptrace() calls to get or set the full XSAVE state.
- Add a PT_GET_XSTATE_INFO which returns the length of the current
XSTATE save area (so the size of the buffer needed for PT_GETXSTATE)
and the current XSAVE mask (%xcr0).
Differential Revision: https://reviews.freebsd.org/D1193
Reviewed by: kib
MFC after: 2 weeks
It is automatically set when -fPIC is passed to the compiler.
Reviewed by: dim, kib
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D1179
on i386 PAE. Previously, VM_PHYSSEG_SPARSE could not be used on amd64 and
i386 because vm_page_startup() would not create vm_page structures for the
kernel page table pages allocated during pmap_bootstrap() but those vm_page
structures are needed when the kernel attempts to promote the corresponding
kernel virtual addresses to superpage mappings. To address this problem, a
new public function, vm_phys_add_seg(), is introduced and vm_phys_init() is
updated to reflect the creation of vm_phys_seg structures by calls to
vm_phys_add_seg().
Discussed with: Svatopluk Kraus
MFC after: 3 weeks
Sponsored by: EMC / Isilon Storage Division
In vt_efifb_init the framebuffer's physaddr is passed to PHYS_TO_DMAP
before the DMAP is setup. The result is not actually accessed until
after the mapping is setup, though. Loosen the assertion in PHYS_TO_DMAP
for now, to allow use when dmaplimit == 0.
Reviewed by: kib
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D1142
have chosen different (and more traditional) stateless/statuful
NAT64 as translation mechanism. Last non-trivial commits to both
faith(4) and faithd(8) happened more than 12 years ago, so I assume
it is time to drop RFC3142 in FreeBSD.
No objections from: net@
Create a proper stack frame for amd64 version of bcopy(). Note that
this also makes the stack properly aligned in the function, despite it
is not strictly needed.
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
support for AVX on i386.
- Similar to amd64, move the FPU save area out of the PCB and instead
store saved FPU state in a variable-sized buffer after the PCB on the
stack.
- To support the variable PCB location, alter the locore code to only use
the bottom-most page of proc0stack for init386(). init386() returns
the correct stack pointer to locore which adjusts the stack for thread0
before calling mi_startup().
- Don't bother setting cr3 in thread0's pcb in locore before calling
init386(). It wasn't used (init386() overwrote it at the end) and
it doesn't work with the variable-sized FPU save area.
- Remove the new-bus attachment from npx. This was only ever useful for
external co-processors using IRQ13, but those have not been supported
for several years. npxinit() is now called much earlier during boot
(init386()) similar to amd64.
- Implement PT_{GET,SET}XSTATE and I386_GET_XFPUSTATE.
- npxsave() is now only called from context switch contexts so it can
use XSAVEOPT.
Differential Revision: https://reviews.freebsd.org/D1058
Reviewed by: kib
Tested on: FreeBSD/i386 VM under bhyve on Intel i5-2520
- Move the existing code to x86/x86/identcpu.c since it is x86-specific.
- If the CPUID2_HV flag is set, assume a hypervisor is present and query
the 0x40000000 leaf to determine the hypervisor vendor ID. Export the
vendor ID and the highest supported hypervisor CPUID leaf via
hv_vendor[] and hv_high variables, respectively. The hv_vendor[]
array is also exported via the hw.hv_vendor sysctl.
- Merge the VMWare detection code from tsc.c into the new probe in
identcpu.c. Add a VM_GUEST_VMWARE to identify vmware and use that in
the TSC code to identify VMWare.
Differential Revision: https://reviews.freebsd.org/D1010
Reviewed by: delphij, jkim, neel
and casuword(9), but do not mix value read and indication of fault.
I know (or remember) enough assembly to handle x86 and powerpc. For
arm, mips and sparc64, implement fueword() and casueword() as wrappers
around fuword() and casuword(), which means that the functions cannot
distinguish between -1 and fault.
On architectures where fueword() and casueword() are native, implement
fuword() and casuword() using fueword() and casuword(), to reduce
assembly code duplication.
Sponsored by: The FreeBSD Foundation
Tested by: pho
MFC after: 2 weeks (ia64 needs treating)
'struct vm *'. Previously it used to be a 'void *' but there is no reason
to hide the actual type from the handler.
Discussed with: tychon
MFC after: 1 week
This reduces variability during timer calibration by keeping the emulation
"close" to the guest. Additionally having all timer emulations in the kernel
will ease the transition to a per-VM clock source (as opposed to using the
host's uptime keep track of time).
Discussed with: grehan
Most I/O port handlers return -1 to signal an error. If this value is returned
without modification to vm_run() then it leads to incorrect behavior because
'-1' is interpreted as ERESTART at the system call level.
Fix this by always returning EIO to signal an error from an I/O port handler.
MFC after: 1 week
