WITHOUT_LIBTHR has been broken for a little over five years now, since the
xz 5.2.0 update introduced a hard liblzma dependency on libthr, and building
a useful system without threading support is becoming increasingly more
difficult.
Additionally, in the five plus years that it's been broken more reverse
dependencies have cropped up in libzstd, libsqlite3, and libcrypto (among
others) that make it more and more difficult to reconcile the effort needed
to fix these options.
Remove the broken options.
PR: 252760
Reviewed by: brooks, emaste, kib
Differential Revision: https://reviews.freebsd.org/D28263
Summary:
Steps 5 and 9:
- Update Mentor and Mentee Information
- Update Ports with Personal Information
Reviewers: tcberner, fernape
Reviewed By: fernape
Subscribers: imp
Differential Revision: https://reviews.freebsd.org/D28281
This reverts commit bd72252aac.
The commit at hand breaks the build for all mips targets and does not
have a one-liner fix.
make[5]: "/usr/src/share/mk/sys.mk" line 169: Malformed conditional (${MACHINE_CPUARCH} == "mips" && ${COMPILER_TYPE} == "gcc")
Currently only amd64, i386 and powerpc build VirtIO modules, yet all other
architectures have at least one kernel configuration that includes the
transport drivers, and so they lack drivers for all the devices they don't
statically compile into the kernel. Instead, enable the build everywhere so all
architectures have the full set of device drivers available.
Reviewed by: bryanv (earlier version), imp (earlier version)
Differential Revision: https://reviews.freebsd.org/D28058
Add separate sections for authentication algorithms, block ciphers,
stream ciphers, and AEAD algorithms. Describe properties commmon to
algorithms in each section to avoid duplication.
Use flat tables to list algorithm properties rather than nested
tables.
List implemented authentication algorithms.
Reviewed by: gbe (manpages)
Sponsored by: Netflix
Differential Revision: https://reviews.freebsd.org/D27833
There is a report that reading of surface/button switch feature report
causes SYN1B7D touchpad malfunction. As specs does not require it to
be readable assume that report usages have default value on attach and
last written value during operation. Do not apply default usage values
on attachment and resume.
While here fix manpage typos and add avg@ to copyright header.
Reported by: Jakob Alvermark <jakob_AT_alvermark_DOT_net>
Reviewed by: avg
Differential revision: https://reviews.freebsd.org/D28196
This patch is a quick hack to change the internal Ethertype used
within the chip. All frames with this type are dropped silently.
This patch allows you to overwrite the factory default 0x88a8, which
is used by IEEE 802.1ad VLAN stacking.
Reviewed by: kp, philip, brueffer
Approved by: kp (mentor)
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D24179
Back when I wrote openfirm.4, sparc64 was the only architecture to
include the corresponding device. However, nowadays all supported
architectures will provied this Open Firmware interface, even x86
when built with FDT support.
As for ofw_console(4), powerpc actually was the first architecture
to ship it but we'll probably not see another consumer in future.
This partially reverts 702547720c and
r357794 respectively, adjusting paths and content as appropriate.
usbhid(4) is disabled by default to avoid conflicts with existing USB HID
drivers. To enable it place following lines to /boot/loader.conf:
hw.usb.usbhid.enable=1
usbhid_load="YES"
Suggested by: jhb
Reviewed by: hselasky
Differential revision: https://reviews.freebsd.org/D28124
When timestamp support has been negotiated, TCP segements received
without a timestamp should be discarded. However, there are broken
TCP implementations (for example, stacks used by Omniswitch 63xx and
64xx models), which send TCP segments without timestamps although
they negotiated timestamp support.
This patch adds a sysctl variable which tolerates such TCP segments
and allows to interoperate with broken stacks.
Reviewed by: jtl@, rscheff@
Differential Revision: https://reviews.freebsd.org/D28142
Sponsored by: Netflix, Inc.
PR: 252449
MFC after: 1 week
Now that I have -head fitting in 8MB of flash again, I can test
out freebsd-head on my home AP test setup. Unfortunately,
the introduction of -O2 in r366664 causes the following infinite
loop shortly after boot:
------
MAP: No valid partition found at map/rootfs.uzip
Warning: no time-of-day clock registered, system time will not be set accurately
start_init: trying /sbin/init
BAD_PAGE_FAULT: pid 1 tid 100001 (init), uid 0: pc 0x4042c320 got a read fault (type 0x2) at 0x2e3a0
Trapframe Register Dump:
zero: 0 at: 0 v0: 0 v1: 0
a0: 0x1af34 a1: 0 a2: 0 a3: 0x7fffeff0
t0: 0 t1: 0 t2: 0 t3: 0
t4: 0 t5: 0 t6: 0 t7: 0
t8: 0 t9: 0x152e8 s0: 0x7fffee84 s1: 0
s2: 0 s3: 0 s4: 0 s5: 0
s6: 0 s7: 0 k0: 0 k1: 0
gp: 0x362c0 sp: 0x7fffedf0 s8: 0 ra: 0x40417df0
sr: 0xf413 mullo: 0 mulhi: 0 badvaddr: 0x2e3a0
cause: 0xffffffff80000008 pc: 0x4042c31c
Page table info for pc address 0x4042c320: pde = 0x80712000, pte = 0xa002065a
Dumping 4 words starting at pc address 0x4042c320:
8f9980e0 80820000 10400067 00809825
Page table info for bad address 0x2e3a0: pde = 0, pte = 0
------
I'm not yet sure why, but until I figure it out with the mips64/cheri
folk this should be reverted.
This should only use -O on GCC generated code for MIPS platforms.
Tested:
* QCA934x (mips74k) - WDR-3600/WDR-4300 APs
Differential Revision: https://reviews.freebsd.org/D28122
which(1) accepts both relative/absolute paths as well as lone binary
names. Set KYUA to kyua and use which(1) to confirm that it can find one;
if it cannot, just advise the user to set KYUA directly to the kyua binary
rather than assuming a relative location from LOCALBASE.
This allows `make check` to be operated with the version of kyua in base
without losing the flexibility of specifying another one.
ngie@ notes that the original intention was to avoid redundant $PATH lookups
and improve the determinism of the target. A future change will likely push
us back to this state, perhaps in the form of reverting this entirely and
just switching to using kyua in base. Accepting any in $PATH should be
considered a transitional move, at least until it's declared otherwise,
since kyua was only semi-recently added to base.
Reviewed-by: brooks, emaste, lwhsu, ngie
Differential-Revision: https://reviews.freebsd.org/D28045
is enabled.
This builds wpa_supplicant / hostpad using internal encryption routines
rather than using libcrypt.
This has been supported in wpa for years now, however since we use
local makefiles for this, we bitrotted dependencies and configuration
options.
Reviewed by: emaste
Differential Revision: https://reviews.freebsd.org/D27958
Add 64-bit address support to Cadence CGEM Ethernet driver for use in
other SoCs such as the Zynq UltraScale+ and SiFive HighFive Unleashed.
Reviewed by: philip, 0mp (manpages)
Differential Revision: https://reviews.freebsd.org/D24304
Currently only libexec/rtld-elf32 uses internal LIBC_NOSSP_PIC during
the build but it gets it directly from the objdir rather than a sysroot.
For example, /usr/obj/usr/src/amd64.amd64/obj-lib32/lib/libc/libc_nossp_pic.a.
We don't stage lib32 libraries in WORLDTMP/usr/lib32 and doing so doesn't
buy much. If we want to use a staged lib32 library then we need to look in
LIBCOMPATTMP where they were staged. For example if LIBC_PIC were wanted then
look for /usr/obj/usr/src/amd64.amd64/obj-lib32/tmp/usr/lib32/libc_pic.a.
Reported by: rlibby
Reviewed by: rlibby
Sponsored by: Dell EMC
Differential Revision: https://reviews.freebsd.org/D27648
This is just like debug.kdb.panic, except the string that's passed in
is reported in the panic message. This allows people with automated
systems to collect kernel panics over a large fleet of machines to
flag panics better. Strings like "Warner look at this hang" or "see
JIRA ABC-1234 for details" allow these automated systems to route the
forced panic to the appropriate engineers like you can with other
types of panics. Other users are likely possible.
Relnotes: Yes
Sponsored by: Netflix
Reviewed by: allanjude (earlier version)
Suggestions from review folded in by: 0mp, emaste, lwhsu
Differential Revision: https://reviews.freebsd.org/D28041
The debugger is always entered after some kind of kernel trap, often a
breakpoint in kdb_enter(). This means that the most recent trapframe
will include kernel state at the time of the trap, when often it is
desirable to the developer to view the contents of the previous
trapframe. This trapframe often corresponds to the entry from userspace.
The ddb(4) man page claims the ability to display user register state
via the 'u' modifier to `show registers`, but this appears untrue. It is
not obvious from a quick search of the history when this feature was
added, or when it was removed. (Re)implement this feature in
db_show_regs, noting that it is not necessarily populated with userspace
state.
Reviewed by: jhb (earlier version), markj, bcr (manpages)
MFC after: 2 weeks
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D27705
Remove wi(4). pccard is going away, and wi only supports PC Card
devices, though it has a minor amount of glue to also support
PCI cards. However, removing the one without removing the other
is hard, so the whole driver is being removed.
Relnotes: Yes
pccard is being removed, so remove bt3c driver since it only has PC
Card attachment. Also remove bt3cfw(8) since it's the firmware for this
driver.
Relnotes: Yes
PC Card support is being removed, so remove its attachment here. ndis
is slated to be removed entirely for 13, but that's not been done yet.
Relnotes: Yes
This change includes:
hpen - Generic / MS Windows compatible HID pen tablet driver.
hgame - Generic game controller and joystick driver.
xb360gp - Xbox360-compatible game controller driver.
Submitted by: Greg V <greg_unrelenting.technology>
Reviewed by: hselasky (as part of D27993)
hidmap is a kernel module that maps HID input usages to evdev events.
Following dependent drivers is included in the commit:
hms - HID mouse driver.
hcons - Consumer page AKA Multimedia keys driver.
hsctrl - System Controls page (Power/Sleep keys) driver.
ps4dshock - Sony DualShock 4 gamepad driver.
Reviewed by: hselasky
Differential revision: https://reviews.freebsd.org/D27993
This driver provides raw access to HID devices through uhid(4)-compatible
interface and is based on pre-8.x uhid(4) code. Unlike uhid(4) it does
not take devices in to monopoly ownership and allows parallel access
from other drivers.
hidraw supports Linux's hidraw-compatible interface as well.
Reviewed by: hselasky
Differential revision: https://reviews.freebsd.org/D27992
This change implements hid_if.m methods for HID-over-USB protocol [1].
Also, this change adds USBHID_ENABLED kernel option which changes
device_probe() priority and adds/removes PnP records to prefer usbhid
over ums, ukbd, wmt and other USB HID device drivers and vice-versa.
The module is based on uhid(4) driver. It is disabled by default for
now due to conflicts with existing USB HID drivers.
[1] https://www.usb.org/sites/default/files/hid1_11.pdf
Reviewed by: hselasky
Differential revision: https://reviews.freebsd.org/D27893
hidquirk(4) is derived from usb_quirk(4) and inherits all its HID-related
functionality. It does not support ioctl(2) interface yet.
Reviewed by: hselasky
Differential revision: https://reviews.freebsd.org/D27890
This driver provides support for multiple HID driver attachments
to single HID transport backend. This ability existed in Net/OpenBSD
(uhidev and ihidev drivers) but has never been ported to FreeBSD.
Unlike Net/OpenBSD we do not use report number alone to distinct report
source but we follow MS way and use a top level collection (TLC) usage
index that report belongs to as a location key.
The driver performs child device autodiscovery based on HID report
descriptor data, proxying of HID requests from child devices to parent
transport backends and broadcasting of interrupts in backward direction.
Differential revision: https://reviews.freebsd.org/D27888
