time, and this is used to reseed the random number generator at
boot time.
NOTE - this has no hope of working if you halt(); you need to
execute rc.shutdown to get the entropy stash.
- Remove unit numbers in config lines.
- Remove all of logger lines and add logstr lines for some cards. This
changes reduced file size from 84k to 45k.
- Use '/sbin/ifconfig $device delete' instead of /etc/pccard_ether_remove
which haven't merge from PAO yet.
- Cosmetic changes.
MAKE_foo for things like MAKE_KERBEROS etc. Use that. I managed to
confuse myself last time and made make.conf different to the code. ;-(
Reported by: Jun Kuriyama <kuriyama@FreeBSD.org>
Seems to work great in the type II cf<->pccard adapter that came with
the card. Others have reported with different chipsets for the pccard
bridge that additional support is needed to make this card work with
the 3.3 volts it needs.
o The Shining PMIDE-ASC card is also used in Road Warrior's Bullet Drive, so
add that to the comments.
o Eiger Lab's fujitsu based ethernet card: EPX-10BT (thanks to Ryan Losh for
donating the card to the cause).
o Add place holder entry for the 3Com Megahertz 3CXEM556. It doesn't work
yet, but that will change in time.
produced human-readable output. I like this, but it's certainly not
something to change willy-nilly without discussion. Revert to -k.
Anyway, the new variable allows folks to pick any units flag that
fits their fancy.
the command-line arguments to be used for the call to df(1) when
daily_status_disks_enable is set to YES.
The name of the new variable was chosen by the maintainer of our
periodic hierarchy, Brian Somers.
PR: 19631
The only change in the default functionality should be that
the output reports are slightly more verbose WRT files deleted.
Not objected to by: freebsd-arch
options. This allows you to set the standard dynamic port
assignment range prior to any network daemons (like named) starting
up, necessary if you are also using a firewall to restrict lower ports.
will be MFC'd in a few days
world as was our old way, rather than when building a kernel.
Some people do not like the new way, and the release building still assumes
modules are built with the world.
patches to work properly). These are the ones I managed to save since
the first of the year. While I tried to make sure all the entries
would work, some of them were converted by hand from the PAO entries.
MELCO LPC3-TX (Hiroshi Yamashita-san <bluemoon@msj.biglobe.ne.jp>)
Allied Telesis CentreCOM LA100-PCM-T V2
(hideaki yoshimura-san <Hideaki_Yoshimura@YAM-YAMASYS5.ccgw.nec.co.jp>)
Planex FNW-3600-T (Satoru Sawada-san <sawada@angel.ne.jp>)
Planex FNW-3700-T (Shigeru Ishida-san <ishida@isl.intec.co.jp>)
ADVANTECH COMpad-32/85 (Kuo Chun Fan-san) (one of two ports)
TDK DN1280R (Toshihisa Eto-san <eto@clave.gr.jp> and
<masahiro@inet.isogo.yokohama.jp> Masahiro Higuchi-san)
Panasonic TO-CAF56K FAX/Data Modem (katsutoshi ito
<itokatsu@mns.lsi.melco.co.jp>)
NTT DoCoMo (formerly NTT Personal) Paldio 611S (Yoshihiko SARUMARU-san
<mistral@imasy.or.jp>)
KME (TAXAN ICD-400PN, etc.) (ncv not in tree yet) (HASEGAWA-san Tomoki
<thasegawa@mta.biglobe.ne.jp>)
WORKBIT Ninja SCSI series (nsp not in tree yet) (HASEGAWA-san Tomoki
<thasegawa@mta.biglobe.ne.jp>)
SMC EtherEZ Combo (Masanori Takeishi-san <marina@yaya.forks.co.jp>)
KANSAI ELECTRIC KLA-PCM/T (Hideaki FUKUI-san <hideman@infosakyu.ne.jp>)
Plus Two cards from Kazuya Kodama-san <kodama@rd.nacsis.ac.jp> which
were in the last commit.
Added two ata devices (Kazuya Kodama <kodama@rd.nacsis.ac.jp> in nomads)
Added CyQ've ELA-110E (mihira-san <sanpei@sanpei.org>)
The CyQ card doesn't have a PR number (yet).
Fix D-Link 660 entry (PR 1340, Annelise Anderson)
Add more comments to very generic pcmcia ethernet card
entry (PR 17006, Georg Graf)
Add Linksys EtherFast 10/100 Intergrated PC Card (PCM100) (private mail
from Sean O'Connell)
PRs: 17006, 13402, 17992
batch the rest:
Add EXP DVD-780 DVD rom drive (brian reichert)
Generic cdrom (???)
Two modems eicon DIVA and com1 mc218 from oliver breuninger
Farallon SkyLINE (Dirk-Willem van Gulik)
Nits to the xe cards for xe driver!
maintained, and has been replaced by msun. The libm sources
shouldn't be removed just yet as there are parts that should be
merged into msun first.
PR: misc/17848
Discussed with: phk & bde
from the sys Makefile's SUBDIRs. This is conditioned in make.conf by the
NO_MODULES variable and the existence of the modules directory. The
actual location of the modules is not modified. Changes in Makefiles
only, this does not affect Peter's recent changes.
Reviewed by: Peter Wemm, who warned me I would get some flack, and
he had the good idea for the NO_MODULES variable.
scripts may use to source safely overrides in ${rc_conf_files}
files.
This protects users who insist on the bad practice of copying
/etc/defaults/rc.conf to /etc/rc.conf from a recursive loop
that exhausts available file descriptors.
Several people have expressed interest in breaking this function
out into its own shell script. Anyone who wants to embark on
such an undertaking would do well to study the attributed PR.
PR: 17595
Reported by: adrian
Submitted by: Doug Barton <Doug@gorean.org>
for pccardd.
Please install /etc/defaults/pccard.conf and update /etc/defaults/rc.conf
as well.
Note that old pccard.conf.sample still remains for while but
no longer to be maintained.
Reviewed by: imp, -mobile ML and nomads ML in Japan.
reserve, in maximal NFS packets. Originally only 2 packets worth of
space was reserved. The default is now 4, which appears to greatly
improve performance for slow to mid-speed machines on gigabit networks.
Add documentation and correct some prior documentation.
Problem Researched by: Andrew Gallatin <gallatin@cs.duke.edu>
Approved by: jkh
have set me. This goes from now back to sometime in January 2000. Last
years' entries might result in more. But it will need to wait for another
time.
o XJEM3288 entry (Ron Rosson <insane@lunatic.oneinsane.net>)
o Fix Xircom CreditCard Modem 56 entry ("Juriy Goloveshkin <juriy@avias.com> ")
o Add pcmcia cd-rom entry from juriy as well, even though it doesn't work
o Add Intellegent Modem (sos)
o 3C562 entries (Marat Fayzullin <fms@cs.umd.edu>)
o Digiteam expresso modem (joerg_wunsch)
o RFI Hotline serial card (joerg_wunsch)
o EP401 Ethernet (jkoshy)
o Novatel wireless modem (nsayer)
o Intel modem 2400+ (aka US Roboitcs Worldport 14400) (sos)
o Option I18n GSM fax modem (markm)
o Toshiba SLIMV90 (roberto)
On a K6-2/450 with fairly fast SCSI disks, building+installing src/share/
takes 2m51.3s, where src/share/doc/ is 1m9.9s of that.
However on a slow Alpha (233MHz) the times are 7m39.3s and 4m58.3s
respectively.
This commit allows one to speed up their build time, without not getting
any important and required changes if one used "NOSHARE".
driver that they use, followed by the MFG CIS string, followed by the
model CIS.
Future entries *WILL* follow this convention, or I'll be grumpy.
Please let me know if this messes anybody up. There were one or two
pentries that were duplicated. Some were removed since they were
identical, others were left in place.
Approved, in principle, by the nomads mailing list.
- 6to4(stf) interface configuration.
- Static route configuration.
- Comment additions.
- Replaced a still existed '@' to '%' in IPv6 scoped addr format.
(This became necessary as previous IPv6 scoped addr format change.)
Much thanks to ume, who helped me reviewing, testing, and finding problems
with these changes.
Approved by: jkh
Reviewed by: ume
modem side of my Xircom CreditCard Ethernet+Modem 33.6. Eliminate bad
Xircom entry. Complete IBM Push/Pop Modem(14.4 -> Push/Pop
Modem(14.4K).
Approved in concept by: jkh
o Correct Entry for Intel EtherExpress (jkoshy)
o Add Option International 56K modem (markm)
o Socket LP-E low power WinCE ethernet card (imp)
Correction approved by: jkh
Adding devices approved in principle by: jkh
o use ata2 consistanty, even though it doesn't matter too much
o SunDisk (aka SanDisk) SDP's need a different config to actualy work
(tested on the 10M part) by me.
o Non-name ata card.
o WIT IDE controller
o IBM FLASH card
o Megahert 28.8 cellular modem that I thought I'd added before.
o LinkMake LM 336 combo modem/fax.
Submitted by various people and gleaned from the nomads and mobile
mailing lists, but I've lost the names. I'm sorry.
Initial version created by, and kindly much tested by:
bmah@CA.Sandia.GOV (Bruce A. Mah)
Approved by: jkh
Reviewed by: bmah@CA.Sandia.GOV (Bruce A. Mah),
Ollivier Robert <roberto@keltia.freenix.fr>
Obtained from: KAME project
/etc/Makefile so that if it is defined, MAKEDEV all is not called
during a make distribution. This helps clean up the messy userland
in jail(), by reducing the number of devices exposed in jail.
Modifications to jail(2) to follow.
Approved by: jkh-arius
# Apollo PCMCIA Ethernet Adapter
# Olicom OC2220
# National Semiconductor InfoMover NE4100
I forgot who submitted the first two, but the third one was submitted
by Jim Bloom.
o Fix entry for Megahertz XJ4336-CC4336. Old config (sio1) seems
conflict with IrDA port or COM port on some laptop and sometimes
totally hang up after insertion.
o Add 'NTT DoCoMo Mobile D Card 96P1' which is used by many
people in Japan.
Reviewed by: imp
o Make sure every entry has a logger event on insert/delete
o Make sure that the order of loggers is consistant
o Add D-Link DEF-650
o use /sbin/ifconfig consistantly
o Add Elecom Laneed LD-CDE, NTT DoCoMo Paldio 321S and 341S
(from shige@FreeBSD.org)
NICs. (Finally!) The PCMCIA, ISA and PCI varieties are all supported,
though only the ISA and PCI ones will work on the alpha for now.
PCCARD, ISA and PCI attachments are all provided. Also provided an
ancontrol(8) utility for configuring the NIC, man pages, and updated
pccard.conf.sample. ISA cards are supported in both ISA PnP and hard-wired
mode, although you must configure the kernel explicitly to support the
hardwired mode since you have to know the I/O address and port ahead
of time.
Special thanks to Doug Ambrisko for doing the initial newbus hackery
and getting it to work in infrastructure mode.
PC Card (PCMPC100). the entry was one character
short...the final ")" was missing.
Pointed out by: Chris D. Faulhaber - jedgar@fxp.org - jedgar@FreeBSD.org
this is no longer the right way to start Vinum unless you are doing some
kind of maintenance, and that's not the sort of thing that would go into
rc.conf.
respectively logging and dropping ICMP REDIRECT packets.
Note that there is no rate limiting on the log messages, so log_redirect
should be used with caution (preferrably only for debugging purposes).
Prompted by docs/12343, in which people seemed to get a little confused.
The original text in the file said:
[...]
# By default we use COM1 as our serial console port *if* we're going to use
# a serial port as our console at all. (0x3E8 = COM2)
#
#BOOT_COMCONSOLE_PORT= 0x3F8
[...]
From what I can make out, some people have assumed that means that if
they just uncomment the BOOT_COMCONSOLE_PORT then it will use COM2:
These same people then assume that "0x3F8" on that line is a typo for
"0x3E8".
What it actually means is that if you uncomment the line then the default
stays as "Ox3F8" (COM1:), and that you have to uncomment the line, *and*
change the value of the variable in order to use COM2:.
So I've made that a little bit clearer. I've also listed the hex values
for COM1: thru COM4:, snarfed from sys/isa/isareg.h.
PR: docs/12343
Submitted by: Bill Grunfelder <wjgrun@dippy.cyberwar.com>
Originally submitted by: Wayne Self <wself@cdrom.com>
Allow a ppp startup option in rc.conf.
Adjust sysinstall so that it appends to the end of ppp.conf
and uses the generated profile to start ppp in auto mode on
boot.
Submitted by: Josef L. Karthauser <joe@uk.FreeBSD.org>
get a list of interfaces, and then automatically configure them if
${ifconfig_${ifn}} or /etc/start_if.${ifn} exists.
This makes it a lot easier to deal with machines that constantly change
their network configuration as you can leave ifconfig settings for all
the possible cards - just the ones that are present will be configured.
and set it to "/etc/pccard.conf.sample" in /etc/defaults/rc.conf.
Perhaps this default value can be inappropriate,
but I set to this value for the convenience of PC-card boot.flp users.
Please correct it if there are better solutions.
twice to enable wrapping for internal wrapping as well. If the option is
not specified wrapping is turned off so that inetd will behave exactly
as it used to before TCP Wrappers was imported.
Change etc/defaults/rc.conf so as to encourage wrapping on new systems.
Clarify the use of TCP Wrappers in the IMPLEMENTATION NOTES of the
manual page.
Approved by: jkh
default.
Despite their name it doesn't keep TCP sessions alive, it kills
them if the other end has gone AWOL. This happens a lot with
clients which use NAT, dynamic IP assignment or which has a 2^32
* 10^-3 seconds upper bound on their uptime.
There is no detectable increase in network trafic because of this:
two minimal TCP packets every two hours for a live TCP connection.
Many servers already enable keepalives themselves.
The host requirements RFC is 10 years old, and doesn't know about
the loosing clients of todays InterNet.
adapter (and some workalikes). Also add man pages and a wicontrol
utility to manipulate some of the card parameters.
This driver was written using information gleaned from the Lucent HCF Light
library, though it does not use any of the HCF Light code itself, mainly
because it's contaminated by the GPL (but also because it's pretty gross).
The HCF Light lacks certain featurs from the full (but proprietary) HCF
library, including 802.11 frame encapsulation support, however it has
just enough register information about the Hermes chip to allow someone
with enough spare time and energy to implement a proper driver. (I would
have prefered getting my hands on the Hermes manual, but that's proprietary
too. For those who are wondering, the Linux driver uses the proprietary
HCF library, but it's provided in object code form only.)
Note that I do not have access to a WavePOINT access point, so I have
only been able to test ad-hoc mode. The wicontrol utility can turn on
BSS mode, but I don't know for certain that the NIC will associate with
an access point correctly. Testers are encouraged to send their results
to me so that I can find out if I screwed up or not.
automagically find all the partitions. This is to be preferred to the
somewhat emetic usage of vinum_slices and the equally obnoxious 'vinum
read' command.
log_in_vain:
log_in_vain turns on logging for packets to ports for which
there is no listener.
rc.sysctl:
A generic way to set sysctl values. It reads /etc/syslog.conf
and sets values based on that. No /etc/syslog.conf has been
checked in yet, and I've not added this to the makefile yet
until I get more feedback.
Reviewed by: -current, -hackers and bde especially
enable_quotas - use quotas on your system
check_quotas - check for violations on startup
By assuming that a system was neat and without violation before it booted
we can skip a long (and at that point needless) process.
Submitted by: Alex Perel <veers@disturbed.net>
