for custom vendor-specific changes to FreeBSD's
default settings.
While here, fix a typo: perfomance -> performance
PR: 245404
Submitted by: Jose Luis Duran
r359704 introduced an 'mtu' option for the virtio-net device emulation.
Update the man page to describe the new option.
Reviewed by: bcr
Differential Revision: https://reviews.freebsd.org/D24723
When reading less than sector size but from sector boundary,
the vdev_read() will read full sector into the provided buffer
and therefore corrupting memory past buffer end.
MFC after: 2 days
This can be run as root or normal user with no problem; if they hadn't
twisted the WITHOUT_CAROOT knob, we'll attempt to use the host certctl to
rehash the DESTDIR. This would allow one to build systems WITHOUT_OPENSSL +
WITH_CAROOT with a populated /etc/ssl that they can then use with an
appropriate *ssl from somewhere else.
Cross-builds are fine because this will always use the host certctl, or just
nag if it's missing and it wasn't a WITHOUT_CAROOT build.
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D24641
These two errors have been present since the tests' introduction.
Coincidentally every test (I think there's only one) that cares about that
field also works when the field's value is 0.
MFC after: 2 weeks
Some ethernet switches have very large register windows; for example
the AR8316 switch MIB starts at 0x20000.
Submitted by: Mori Hiroki <yamori813@yahoo.co.jp>
Currently each rtentry has dst&gateway allocated separately from another zone,
bloating cache accesses.
Current 'struct rtentry' has 12 "mandatory" radix pointers in the beginning,
leaving 4 usable pointers/32 bytes in the first 2 cache lines (amd64).
Fields needed for the datapath are destination sockaddr and rt_nhop.
So far it doesn't look like there is other routable addressing protocol other
than IPv4/IPv6/MPLS, which uses keys longer than 20 bytes.
With that in mind, embed dst into struct rtentry, making the first 24 bytes
of rtentry within 128 bytes. That is enough to make IPv6 address within first
128 bytes.
It is still pretty easy to add code for supporting separately-allocated dst,
however it doesn't make a lot of sense in having such code without a use case.
As rS359823 moved the gateway to the nexthop structure, the dst embedding change
removes the need for any additional allocations done by rt_setgate().
Lastly, as a part of cleanup, remove counter(9) allocation code, as this field
is not used in packet processing anymore.
Reviewed by: ae
Differential Revision: https://reviews.freebsd.org/D24669
I'm still not sure whether this is the full solution, but here goes.
I have a two node DWDS setup - a main AP with the ethernet bridge uplink
and a satellite AP in the back of the house. They're both AR9344+AR9580
dual band 11n APs.
The problem was that multicast frames was not going from the DWDS AP to
the DWDS STA. Unicast frames are fine, and multicast frames from the
DWDS STA to AP are fine.
Now, multicast and unicast frames from the STA -> AP are just transmitted
using the unicast key. That's fine. However, the AP -> STA multicast
frames by default are transmitted using the current default / multicast
key, the shared one between all STAs in a BSS. Now, the DWDS implementation
ignores non WDS frames - it only allows about 4 address frames outside
of management / EAPOL frames! - so the STA side ignores the normal multicast
frames.
Instead, the AP side uses ieee80211_dwds_mcast() to send multicast frames
to each WDS VAP that was created as part of the "dynamic" part of DWDS.
This should be queuing them individually to each node instead of using
the normal multicast send path; and this is how they should get turned into
4-addr WDS frames.
HOWEVER, ieee80211_encap() was trying to use the default TX key to queue
them rather than the unicast key that's already setup. Since this synthetic
node doesn't have the default TX key setup, transmission fails. Things
would be fine in WEP and in open mode because in both cases you would
have static keys (or no keys) setup. It just fails in WPA mode.
This resolves the issue. AP DWDS multicast is now sent using the unicast
key just like in STA mode and I'm pretty sure the STA mode side will stil
work fine (as it's a STA VAP with a DWDS flag..)
Tested:
* TL-WDR3600/4300 APs
BINUTILS is needed only for ports, and will be disabled once the failing
ports are addressed (likely by growing a binutils dependency).
BINUTILS_BOOTSTRAP is needed only on amd64, for skein_block_asm.s. There
is no need to enable it on i386.
This will all be removed before FreeBSD 13.0.
Otherwise the initial call to set_top_of_stack(), which occurs before
fpuinit() sets the correct value for cpu_max_ext_state_size, leaves the
stack base at an incorrect location. Then, when the full area is
zeroed, we end up erroneously zeroing part of the following page.
Reviewed by: kib
MFC after: 1 week
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D24754
This test uses a gnop feature (delay probability) that isn't available on
stable/12. But it's unnecessary; the test works fine without it. Removing
it simplifies the test and, once MFCed, will allow it to pass on stable/12.
PR: 244158
Reported by: lwhsu
MFC after: 2 weeks
getMainExecutable: Fix hand-rolled AT_EXECPATH for older FreeBSD
Once we hit AT_NULL, we need to bail out of the loop; not just the
enclosing switch. This fixes basic usage (e.g. `cc --version`) when
AT_EXECPATH isn't present on older branches (e.g. under
emu-user-static, at the moment), where we would previously run off
the end of ::environ.
Patch By: kevans
Reviewed By: arichardson
Differential Revision: https://reviews.llvm.org/D79239
MFC after: 3 days
causes so_reuseport_lb_test to fail since it slows down how quickly the program runs until the timeout occurs
and fails the test
Sponsored by: Netflix inc.
Differential Revision: https://reviews.freebsd.org/D24747
This is a general cleanup of the relocatable kernel support on powerpc,
needed to enable kernel ifuncs.
* Fix some relocatable issues in the kernel linker, and change to using
a RELOCATABLE_KERNEL #define instead of #ifdef __powerpc__ for parts that
other platforms can use in the future if they wish to have ET_DYN kernels.
* Get rid of the DB_STOFFS hack now that the kernel is relocated to the DMAP
properly across the board on powerpc64.
* Add powerpc64 and powerpc32 ifunc functionality.
* Allow AIM64 virtual mode OF kernels to run from the DMAP like other AIM64
by implementing a virtual mode restart. This fixes the runtime address on
PowerMac G5.
* Fix symbol relocation problems on post-relocation kernels by relocating
the symbol table.
* Add an undocumented method for supplying kernel symbols on powernv and
other powerpc machines using linux-style kernel/initrd loading -- If
you pass the kernel in as the initrd as well, the copy resident in initrd
will be used as a source for symbols when initializing the debugger.
This method is subject to removal once we have a better way of doing this.
Approved by: jhibbits
Relnotes: yes
Sponsored by: Tag1 Consulting, Inc.
Differential Revision: https://reviews.freebsd.org/D23156
Those function are use to map/unmap io region of a pci device.
Different resource can be mapped depending on the bar so use a
tailq to store them all.
Sponsored-by: The FreeBSD Foundation
Reviewed by: emaste, hselasky
Differential Revision: https://reviews.freebsd.org/D24696
Initially it seemed that there were multiple possible ways to do it.
Processing option -p could conditionally add selected processes and
their descendants to the list for further work, but it is not guaranteed
to know whether the -d option has been used or not, and it also doesn't
have access to the process list just yet.
There is also descendant_sort() which has access to all possibly needed
information, but serves the purely post-processing purpose of sorting
output.
Then there is the loop that uses invocation information and full process
list to create a list of processes for final display. It seems the most
natural place to implement this, but indeterminate state of the process
list and volatility of the final list that is being created obstruct
adding an elegant search for all elements of process descendancy trees.
So I opted for adding another loop, just before the one I mentioned
above. For all selected processes it conditionally adds direct
descendants to the end of this list of selected processes.
Possible usage:
* ps -auxd -p $$
* ps -auxd -p 1
* while x=$(pgrep svnlite); do clear; ps auxd -p $x; sleep 2; done
* ps -auxd -p `pgrep make`
Reviewed by: kevans, kaktus (earlier version)
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D24380
The attach method uses GPIO_GET_BUS() to get a "newbus" device
that provides a pin. But on hints-based systems a GPIO controller
driver might not be fully initialized yet and it does not know gpiobus
hanging off it. Thus, GPIO_GET_BUS() cannot be called yet.
The reason is that controller drivers typically create a child gpiobus
using gpiobus_attach_bus() and that leads to the following call chain:
gpiobus_attach_bus() -> gpiobus_attach() ->
bus_generic_attach(gpiobus) -> gpioiic_attach().
So, gpioiic_attach() is called before gpiobus_attach_bus() returns.
I observed this bug with nctgpio driver on amd64.
I think that the problem was introduced in r355276.
The fix is to avoid calling GPIO_GET_BUS() from the attach method.
Instead, we know that on hints-based systems only the parent gpiobus can
provide the pins.
Nothing is changed for FDT-based systems.
MFC after: 1 week
Sometimes, especially when there is not much memory in the system left,
allocating mbuf jumbo clusters (like 9KB or 16KB) can take a lot of time
and it is not guaranteed that it'll succeed. In that situation, the
fallback will work, but if the refill needs to take a place for a lot of
descriptors at once, the time spent in m_getjcl looking for memory can
cause system unresponsiveness due to high priority of the Rx task. This
can also lead to driver reset, because Tx cleanup routine is being
blocked and timer service could detect that Tx packets aren't cleaned
up. The reset routine can further create another unresponsiveness - Rx
rings are being refilled there, so m_getjcl will again burn the CPU.
This was causing NVMe driver timeouts and resets, because network driver
is having higher priority.
Instead of 16KB jumbo clusters for the Rx buffers, 9KB clusters are
enough - ENA MTU is being set to 9K anyway, so it's very unlikely that
more space than 9KB will be needed.
However, 9KB jumbo clusters can still cause issues, so by default the
page size mbuf cluster will be used for the Rx descriptors. This can have a
small (~2%) impact on the throughput of the device, so to restore
original behavior, one must change sysctl "hw.ena.enable_9k_mbufs" to
"1" in "/boot/loader.conf" file.
As a part of this patch (important fix), the version of the driver
was updated to v2.1.2.
Submitted by: cperciva
Reviewed by: Michal Krawczyk <mk@semihalf.com>
Reviewed by: Ido Segev <idose@amazon.com>
Reviewed by: Guy Tzalik <gtzalik@amazon.com>
MFC after: 3 days
PR: 225791, 234838, 235856, 236989, 243531
Differential Revision: https://reviews.freebsd.org/D24546
a few extra arguments). Recently that changed to only have one arg extra so
that two ifdefs around the call are no longer needed. Lets take out the
extra ifdef and arg.
Sponsored by: Netflix Inc
Differential Revision: https://reviews.freebsd.org/D24736
Create rib_lookup() wrapper around per-af dataplane lookup functions.
This will help in the cases of having control plane af-agnostic code.
Switch ifa_ifwithroute() to use this function instead of rtalloc1().
Reviewed by: ae
Differential Revision: https://reviews.freebsd.org/D24731
The bus is independent of the device, so all devices can be attached to
either a PCI bus or an MMIO bus. For example, QEMU's virtio-rng-device
gives the MMIO variant of virtio-rng-pci, and is now detected.
Reviewed by: andrew, br, brooks (mentor)
Approved by: andrew, br, brooks (mentor)
Differential Revision: https://reviews.freebsd.org/D24730
The non-legacy virtio MMIO specification drops the use of PFNs and
replaces them with physical addresses. Whilst many implementations are
so-called transitional devices, also implementing the legacy
specification, TinyEMU[1] does not. Device-specific configuration
registers have also changed to being little-endian, and must be accessed
using a single aligned access for registers up to 32 bits, and two
32-bit aligned accesses for 64-bit registers.
[1] https://bellard.org/tinyemu/
Reviewed by: br, brooks (mentor)
Approved by: br, brooks (mentor)
Differential Revision: https://reviews.freebsd.org/D24681
With the removal of in-tree consumers of DES, Triple DES, and
MD5-HMAC, the only algorithm this driver still supports is SHA1-HMAC.
This is not very useful as a standalone algorithm (IPsec AH-only with
SHA1 would be the only user).
This driver has also not been kept up to date with the original driver
in OpenBSD which supports a few more cards and AES-CBC on newer cards.
The newest card currently supported by this driver was released in
2005.
Reviewed by: cem
MFC after: 1 week
Relnotes: yes
Sponsored by: Chelsio Communications
Differential Revision: https://reviews.freebsd.org/D24691
[PowerPC] Add clang -msvr4-struct-return for 32-bit ELF
Summary:
Change the default ABI to be compatible with GCC. For 32-bit ELF
targets other than Linux, Clang now returns small structs in
registers r3/r4. This affects FreeBSD, NetBSD, OpenBSD. There is no
change for 32-bit Linux, where Clang continues to return all structs
in memory.
Add clang options -maix-struct-return (to return structs in memory)
and -msvr4-struct-return (to return structs in registers) to be
compatible with gcc. These options are only for PPC32; reject them on
PPC64 and other targets. The options are like -fpcc-struct-return and
-freg-struct-return for X86_32, and use similar code.
To actually return a struct in registers, coerce it to an integer of
the same size. LLVM may optimize the code to remove unnecessary
accesses to memory, and will return i32 in r3 or i64 in r3:r4.
Fixes PR#40736
Patch by George Koehler!
Reviewed By: jhibbits, nemanjai
Differential Revision: https://reviews.llvm.org/D73290
Requested by: jhibbits
MFC after: 3 days
The in-tree binutils is old and will not be updated. It does not support
all archs supported by FreeBSD, and for the archs it does support not all
CPU features are supported.
Other tools have migrated to copyfree alternatives. Although llvm-objdump
is nearly a drop-in replacement for GNU objdump it is missing a few options
and has some differences in output format. For now just remove GNU objdump;
ports and developers can use a contemporary, maintained version from ports
or packages. We can revisit installing llvm-objdump as objdump in the
future.
PR: 212319 [exp-run]
Relnotes: Yes
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D7338
unsupported relocation on symbol" when assembling arm 'adr' pseudo
instructions. However, the upstream commit did not take big-endian arm
into account.
Applying the same changes to the big-endian handling is straightforward,
thanks to Andrew Turner and Peter Smith for the hint. This will also be
submitted upstream.
MFC after: immediately, since this fix is meant for stable/11
