Commit Graph

9100 Commits

Author SHA1 Message Date
imp
1281a2b1fe In [bsd-nomads:16650] shibagaki-san presented an example product id of
0 in a problem that is being discussed.  That means that the test for
product != 0 may cause problems.  Looking at pccarddevs (which i
should have done earlier) we see:

product	BONDWELL B236		0x0000 Game Card Joystick
product CONTEC CNETPC		0x0000 Contec C-NET(PC)C
product IBM MICRODRIVE		0x0000 IBM Microdrive
product RAYTHEON WLAN		0x0000 WLAN Adapter
product SOCKET EA_ETHER		0x0000 Socket Communications EA
product TDK LAK_CD011WL		0x0000 TDK LAK-CD011WL

so use only the vendor field for the end sentinel.
2003-04-10 04:11:15 +00:00
imp
bab509397b 1.37 was committed prematurely: back out until I can commit all parts at the
same time.
2003-04-09 22:10:28 +00:00
imp
7bba953950 1.77 was bogus: there is no logic bug. Back it out and compare the
correct fields instead.
2003-04-09 22:07:02 +00:00
jhb
4f61f946f2 Fix a logic bug in previous commit (use || rather than &&). In order to
terminate the loop only when both the name and vendor are zero, we should
keep looping so long as either one is not zero.
2003-04-09 21:24:23 +00:00
imp
04fd973e42 Make sure that both pp_name and pp_vendor are zero to know we're at the
end of the list now that some valid entries don't have pp_name set.  Also,
don't print a warning if pp->name is NULL and it is a total wildcard.
2003-04-09 15:54:00 +00:00
jake
041ad7b648 Compile with PAE. 2003-04-09 14:58:02 +00:00
phk
f3a79aea41 Add a couple of undocumented test options to MD(4) to aid in regression
testting of GEOM.
2003-04-09 11:59:29 +00:00
mdodd
5f0dd74a54 At least pretend to handle USB_GET_REPORT_ID. 2003-04-09 08:43:01 +00:00
silby
979ed3a82e Fix if_vr's handling of vr_encap failures. 3 parts:
- Don't bother setting OACTIVE when the descriptors are all full
  or there's a vr_encap failure, it doesn't help anything.
- Correctly roll back on the descriptor list after a failure
  so as not to corrupt the list.
- Add a missing VR_UNLOCK().

Without these changes, vr_encap failure (which is assured during
a low mbuf situation) would result in the card locking until
the watchdog could fire.

MFC after:	1 week
2003-04-09 02:21:54 +00:00
phk
7611c6c351 Almost the finished article.
Boost sample rate to 1.25 MSPS since that allows us to use a 5Mhz
(/4) or 10Mhz (/8) external clock.

Make the interrupt both MPSAFE and FAST, at 610 interrupts a second,
and a max time to service of 5 msec, we brake for nobody.

Use kernel thread to accumulate into the 25 possible wave signals.

Use #ifdef _KERNEL to let .c file double as .h file defining the ioctls.
2003-04-08 19:12:48 +00:00
mux
f8e2ba2ce6 - Pass a busdma tag and a busdma map to fxp_dma_wait() so that
it can do the necessary bus_dmamap_sync() calls.
- While I'm here, reorder arguments to match other functions.
2003-04-08 18:56:45 +00:00
mux
9ca3a50f70 Add an XXX comment for the atomic operation in the __alpha__
case so that it doesn't confuse more people.  Use the more
correct atomic_clear_16() instead of atomic_clear_short().
2003-04-08 18:35:51 +00:00
sos
42a1508521 Fix breakage on sparc64.
Note to self: always test even the smallest changes on all platforms.
2003-04-08 18:01:30 +00:00
mux
d266784cd1 - Endian fixes.
- 6 -> ETHER_ADDR_LEN.
2003-04-08 17:21:15 +00:00
imp
db67e9740f Use the new _ND macros to not include the description strings. If any
of the entries have a description, we'll use that to override the
description that the pccard layer generates for us.

This saves about 930 bytes in the module, so I feel it won't hurt the
crowded boot disks....

# other modules to follow
2003-04-08 15:36:43 +00:00
imp
ec272b22bc Create new _ND versions to allow one to not specify the description be
stored in the table.
2003-04-08 15:28:58 +00:00
imp
0fb4f74599 Don't set the decription, since the pccard layer does that for us now.
Remove the duplicate entries that were there to disambiguate different
cards that were the same, yet people wanted to have different dmesg.
2003-04-08 15:26:02 +00:00
des
567ac2b268 Introduce an M_ASSERTPKTHDR() macro which performs the very common task
of asserting that an mbuf has a packet header.  Use it instead of hand-
rolled versions wherever applicable.

Submitted by:	Hiten Pandya <hiten@unixdaemons.com>
2003-04-08 14:25:47 +00:00
mux
e105056ea6 Fix the hangs people have been seeing. For some reason, the
atomic operation change caused this, so backout it until I
can figure out what's wrong with it.
2003-04-08 13:05:11 +00:00
sos
8568dcf658 Fix a long standing bug in handling the last part of a stripe
on "odd" size disks.

Add printout of the RAID structure on verbose boot.
2003-04-08 07:48:52 +00:00
imp
bc776ad450 MFp4: when you can't allocate a resource, print a message, don't panic. 2003-04-08 07:05:16 +00:00
imp
5f6f6eb722 MFP4:
o don't access struct resource members directly.
o Set a default device description based on the CIS name.
2003-04-08 07:02:03 +00:00
imp
3a32b339c9 u_int*_t -> uint*_t
-1 -> 0xffffffff
2003-04-08 06:59:20 +00:00
imp
6c830bb5b8 Don't need to read this config register if we're just going to
overwrite it in the next line.
2003-04-08 06:54:10 +00:00
imp
7f0b9b11f9 MFp4: Massively unbreak module loading/unloading:
o Only complain about detached children that aren't pccard/cardbus.
o Don't NULL out the pccarddev and cbdev devices.  detach just
  disassociates the device and driver.  It doesn't delete the child.
o on driver added, just probe_and_attach the children.  If there's
  any children attached, wakeup the device add/delete thread.
o wakeup the add/delete thread with the correct cv_signal() rather
  than the bogus wakeup(sc).  It used to be that we did a tsleep on
  sc in this thread, but switched to the more reliable cv stuff a while
  ago w/o changing this.
o Remove bogus checks when reallocating memory for the registers.  They
  weren't needed and turned out to be completely bogus.

This lets me load/unload pccard with a pccard in a slot and have the
child correctly detach/attach.  This should help people that have wi
in their kernel, but that kldload cbb and pccard, for example.
2003-04-08 06:52:16 +00:00
mux
9c534b08bc Correct the maxsize and maxsegsz parameters for the
bus_dma_tag_create() calls.  Without this, fxp(4) + PAE
would consume insane amounts of bounce pages.
2003-04-07 17:02:44 +00:00
imp
c0491eef73 resync 2003-04-07 15:36:46 +00:00
mux
e4566c3ff2 Remove an erroneous htole16(). The byte_count field in the
struct fxp_cb_config is a 6-bit field, not a 16-bit integer
as in struct fxp_cb_tx.
2003-04-07 14:53:30 +00:00
sos
a014051b02 Minor cleanup of the ATA RAID code. 2003-04-07 14:14:29 +00:00
sos
d6ec3d03e8 Third round of updates to the ATA driver.
More DMA cleanups, including fix for breakage on older Promise controllers.

Add more ways of getting to the ATA registers.
2003-04-07 14:12:12 +00:00
murray
9cbd3070ae Add ID for Kawasaki LSI Inc. USB-Ethernet, rev 1.00/2.02 adapter.
PR:		kern/50064
Submitted by:	Scott Renfro <scott@renfro.org>
MFC after:	3 days
2003-04-07 10:26:59 +00:00
mdodd
d3c5efd512 - Add PCI support (Adaptec AHA-2920/A,Future Domain TMC-18XX/3260).
- Reduce duplicated code.

PR:             50427
Submitted by:   Bob Bishop <rb@gid.co.uk>
2003-04-07 10:13:25 +00:00
murray
e37a3b039d Fix typo.
PR:		kern/50504
Submitted by:	Alex Semenyaka <alexs@snark.ratmir.ru>
MFC after:	3 days
2003-04-07 10:06:48 +00:00
murray
d56efcb743 Correct typos.
PR:		kern/50619
Submitted by:	Gavin Atkinson <gavin.atkinson@ury.york.ac.uk>
MFC after:	3 days
2003-04-07 09:42:45 +00:00
mux
4744a04dfb Move a bus_dmamap_sync() to the correct place. 2003-04-06 23:16:00 +00:00
mux
f11ab00778 Because alpha can't access memory in 16-bit granularity,
we're using an atomic operation to clear the suspend flag
in fxp_start().  Since other architectures may need the
same thing, we want to do it all the time and not only
in the __alpha__ case.  However, we don't want to use
atomic operations on 16-bit integers, because those may
not be available on any architecture.  We're thus faking
a 32-bit atomic operation here.  This patch also deals
with endianness here.
2003-04-06 23:09:57 +00:00
mux
669d8d48a3 Revert the s/u_int/u_int8_t/ changes, we can't really use other
integer types than int with bit-fields in a portable way.

Prodded by:	bde
2003-04-06 21:35:45 +00:00
scottl
13536dd031 Add support for the CLIE 5.0 series of PDAs 2003-04-06 17:34:50 +00:00
scottl
5d70c28720 Regen from usbdevs v.116 2003-04-06 17:34:08 +00:00
scottl
7aaf395850 Regen 2003-04-06 17:32:39 +00:00
scottl
b2cf831bbe Add ID's for the CLIE 5.0 series and the Belkin F5U109 usb->serial adapter. 2003-04-06 17:32:12 +00:00
mux
28332bda3b Use __FBSDID. 2003-04-06 01:27:12 +00:00
mux
8da74262e1 Correct the definition of the link_addr and rbd_addr fields
in struct fxp_rfa.  This should have been committed with my
last endianness fixes.
2003-04-06 01:11:38 +00:00
mux
90f8d39b6c - Instead of rolling our own alignment-safe function, use le32enc()
which deals with both endianness and alignment issues.
- Collect low-hanging fruits for endianness safety.
- Use 0xffffffff instead of -1 where appropriate.
2003-04-06 01:04:17 +00:00
mux
f8837dfb26 - Use __FXP_BITFIELDX macros to make the configuration bitfield
endian safe.
- Change some u_int to u_int8_t which make more sense here since
  we're really defining bytes.  That produces the same code due to
  how bitfields work.
- Add the definition of the vlan_drop_en bit (not used yet).
- Add some useful comments.

Obtained from:	NetBSD
2003-04-05 23:46:58 +00:00
cognet
975f6df38d Fix ed compilation with PAE by using %jx instead of %x. 2003-04-05 18:12:36 +00:00
mux
f6dd92222f - Change a FXP_NRFABUFS which would have been a FXP_NTXCB.
- Correct some bus_dmamap_sync() calls.

Submitted by:	jake
2003-04-05 12:43:21 +00:00
mux
5780526be0 Setup our interrupt only at the end of fxp_attach(), when all
other allocations/initializations have been successful.  I kinda
doubt it will fix the recent breakage that some people are seeing,
but this could have caused problems for sure.
2003-04-05 01:27:17 +00:00
phk
d7028ab722 Add a rudimentary but working driver for the Adlink "NuDaq PCI-9812".
This is a 4 channel 20 msps 12 bit ADC card.

Anyone wanting to play with GNUradio or similar can start here.
2003-04-04 18:53:04 +00:00
sanpei
4ea6a23f8d Add NE2000DVF_AX88190 flag to Corega FEther PCC-TXD
(see also /etc/defaults/pccard.conf rev.1.172)
2003-04-04 14:46:50 +00:00