If gnttab_grant_foreign_access() fails for any of the indirection
pages, the code breaks out of both the loops without freeing the local
variable indirectpages, causing a memory leak.
Submitted by: Pratyush Yadav <pratyush@freebsd.org>
Differential Review: https://reviews.freebsd.org/D16136
Length is an unsigned integer, so checking against < 0 doesn't make
sense. While there also make clear that a length of 0 always succeeds.
Submitted by: Pratyush Yadav <pratyush@freebsd.org>
Differential Review: https://reviews.freebsd.org/D16045
sending an invalid segment into the reassembly
queue. This would happen if you enabled the
data after close option.
Sponsored by: Netflix
Differential Revision: https://reviews.freebsd.org/D16453
Precompute the new PTE before entering the critical section.
Eliminate duplication of the pmap and pv list unlock operations in
pmap_enter() by implementing a single return path. Otherwise, the
duplication will only increase with the upcoming support for psind == 1.
Reviewed by: mmel
Tested by: mmel
Discussed with: kib, markj
MFC after: 3 weeks
Differential Revision: https://reviews.freebsd.org/D16443
Ifuncs selectors dispatch copyin(9) family to the suitable variant, to
set rflags.AC around userspace access. Rflags.AC bit is cleared in
all kernel entry points unconditionally even on machines not
supporting SMAP.
Reviewed by: jhb
Sponsored by: The FreeBSD Foundation
Differential revision: https://reviews.freebsd.org/D13838
According to the man page, getrusage(2) should return EFAULT if the rusage
argument lies outside of the process's address space. But due to an
oversight in r100384, that's never been the case during 32-bit emulation.
Fix it.
PR: 230153
Reported by: tests(7)
Reviewed by: cem
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D16500
It allows locking or unlocking physical pages in memory within a jail
This allows running elasticsearch with "bootstrap.memory_lock" inside a jail
Reviewed by: jamie@
Differential Revision: https://reviews.freebsd.org/D16342
from being installed in the correct directory.
Resurrect a few rc.d scripts that were prematurely deleted from the
Makefile by r336845.
Reviewed by: brd
Since all post-installkernel steps are assumed to operate in the updated
installation, it's necessary to chroot all of the followup steps in the new
boot environment. Set up and mount the source and object directories at the
same paths inside the BE root, and clean up to the extent changes were made.
This commit fixes upgrading using beinstall past the new ntpd user change.
Improve testability of changes to this script while I'm here.
Reported by: rpokala (earlier patch)
initial call to sched_balance() during startup is meant to initialize
balance_ticks, but does not actually do that since smp_started is
still zero at that time. Since balance_ticks does not get set,
there are no further calls to sched_balance(). Fix this by setting
balance_ticks in sched_initticks() since we know the value of
balance_interval at that time, and eliminate the useless startup
call to sched_balance(). We don't need to randomize the intial
value of balance_ticks.
Since there is now only one call to sched_balance(), we can hoist
the tests at the top of this function out to the caller and avoid
the overhead of the function call when running a SMP kernel on UP
hardware.
PR: 223914
Reviewed by: kib
MFC after: 2 weeks
Update vendor/libarchive/dist to git 2c8c83b9731ff822fad6cc8c670ea5519c366a14
Important vendor changes:
PR #993: Chdir to -C directory for metalog processing
OSS-Fuzz #4969: Check size of the extended time field in zip archives
PR #973: Record informational compression level in gzip header
MFC after: 1 week
Important vendor changes:
PR #993: Chdir to -C directory for metalog processing
OSS-Fuzz #4969: Check size of the extended time field in zip archives
PR #973: Record informational compression level in gzip header
This produce a generic sdcard image using armv7 GENERIC kernel that
just need some u-boot (or none if the board have u-boot or a SPI flash
for example).
Reviewed by: imp, gjb
Differential Revision: https://reviews.freebsd.org/D16410
This keeps most startup scripts as CONFS per discussion on src-committers from
back during BSDCan.
Approved by: will (mentor)
Differential Revision: https://reviews.freebsd.org/D16466
The padding makes it much easier to read, but occasionally means that commits
like this one have to be done to follow up. I intentionally kept this
separate from r336841 to try and make things easier to follow later on.
Approved by: bapt (mentor)
I believe that a ReclaimComplete with rca_one_fs == TRUE is only
to be used after a file system has been transferred to a different
file server. However, RFC5661 is somewhat vague w.r.t. this and
the ESXi 6.7 client does both a ReclaimComplete with rca_one_fs == TRUE
and one with ReclaimComplete with rca_one_fs == FALSE.
Therefore, just ignore the rca_one_fs == TRUE operation and return
NFS_OK without doing anything instead of replying NFS4ERR_NOTSUPP.
This allows the ESXi 6.7 NFSv4.1 client to do a mount.
After discussion on the NFSv4 IETF working group mailing list, doing this
along with setting a flag to note that a ReclaimComplete with rca_one_fs TRUE
was an appropriate way to handle this.
The flag that indicates that a ReclaimComplete with rca_one_fs == TRUE was
done may be used to disable replies of NFS4ERR_GRACE for non-reclaim
state operations in a future commit.
This patch along with r332790, r334492 and r336357 allow ESXi 6.7 NFSv4.1 mounts
work ok. ESX 6.5 NFSv4.1 mounts do not work well, due to what I believe are
violations of RFC-5661 and should not be used.
Reported by: andreas.nagy@frequentis.com
Tested by: andreas.nagy@frequentis.com, daniel@ftml.net (earlier version)
MFC after: 2 weeks
Relnotes: yes
Along with some pending upstream changes, this will allow raising the WARNS
level.
Reviewed by: cem, aniketp
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D16486
Note when we've found a 8250 PNP node. Only try to set hw.uart.console
if we see one (otherwise ignore serial hints). The 8250 is the only
one known to have I/O ports, so limit the guessing to when we've
positively seen one. And limit this to x86 since that's the only
platform where we have I/O ports. Otherwise, we'd set the serial port
to something crazy for the platform and fall off the cliff early in
boot.
Differential Revision: https://reviews.freebsd.org/D16463
They were added for unclear reasons in r277263. The current OpenSSH
defaults (7.5+) are reasonable, and do not include the insecure rc4 cipher:
chacha20-poly1305@openssh.com,
aes128-ctr,aes192-ctr,aes256-ctr,
aes128-gcm@openssh.com,aes256-gcm@openssh.com,
aes128-cbc,aes192-cbc,aes256-cbc
I think I recall there being a reason for a specific list of ciphers on GCE
at the time, but I do not recall what it was, and cannot find any
current GCE documentation of such a list.
So, just revert the explicit configuration and use sane openssh defaults.
PR: 230092
Submitted by: Gustavo Scalet <gustavo.scalet AT collabora.com>
MFC after: 3 days
Security: yes
Rendering of execle was missing a comma between the NULL argument and envp.
For unclear reasons, POSIX' definition of these routines comments out the
mandatory trailing NULL argument. That seems unnecessary and probably
(reasonably) confuses mdoc.
For unclear reasons, POSIX' definition of these routines spells NULL as
"(char *)0." This is needlessly unclear. One guess might be that POSIX
targets more exotic computer architectures than FreeBSD does. Fortunately,
there is no such problem on any reasonable platform for FreeBSD to support.
Spell NULL as NULL.
The comma was probably removed in r117204 while the comment and creative
spelling of NULL were added in r116537 (both 15 years ago).
