LPC devices. Among other things, the LPC serial ports now appear as
ACPI devices.
- Move the info for the top-level PCI bus into the PCI emulation code and
add ResourceProducer entries for the memory ranges decoded by the bus
for memory BARs.
- Add a framework to allow each PCI emulation driver to optionally write
an entry into the DSDT under the \_SB_.PCI0 namespace. The LPC driver
uses this to write a node for the LPC bus (\_SB_.PCI0.ISA).
- Add a linker set to allow any LPC devices to write entries into the
DSDT below the LPC node.
- Move the existing DSDT block for the RTC to the RTC driver.
- Add DSDT nodes for the AT PIC, the 8254 ISA timer, and the LPC UART
devices.
- Add a "SuperIO" device under the LPC node to claim "system resources"
aling with a linker set to allow various drivers to add IO or memory
ranges that should be claimed as a system resource.
- Add system resource entries for the extended RTC IO range, the registers
used for ACPI power management, the ELCR, PCI interrupt routing register,
and post data register.
- Add various helper routines for generating DSDT entries.
Reviewed by: neel (earlier version)
hides the setjmp/longjmp semantics of VM enter/exit. vmx_enter_guest() is used
to enter guest context and vmx_exit_guest() is used to transition back into
host context.
Fix a longstanding race where a vcpu interrupt notification might be ignored
if it happens after vmx_inject_interrupts() but before host interrupts are
disabled in vmx_resume/vmx_launch. We now called vmx_inject_interrupts() with
host interrupts disabled to prevent this.
Suggested by: grehan@
i. e. the POSIX:5.6.1 st_ino field, which can be used to detect hard links
in the file system. This is also the default in mkisofs(8) and according to
its man page, no system only being able to cope with Rock Ridge version 1.10
is known to exist.
PR: 185138
Submitted by: Kurt Lidl
MFC after: 1 week
to SIGTERM when ACPI is enabled. Sending SIGTERM to the hypervisor when an
ACPI-aware OS is running will now trigger a soft-off allowing for a graceful
shutdown of the guest.
- Move constants for ACPI-related registers to acpi.h.
- Implement an SMI_CMD register with commands to enable and disable ACPI.
Currently the only change when ACPI is enabled is to enable the virtual
power button via SIGTERM.
- Implement a fixed-feature power button when ACPI is enabled by asserting
PWRBTN_STS in PM1_EVT when SIGTERM is received.
- Add support for EVFILT_SIGNAL events to mevent.
- Implement support for the ACPI system command interrupt (SCI) and assert
it when needed based on the values in PM1_EVT. Mark the SCI as active-low
and level triggered in the MADT and MP Table.
- Mark PCI interrupts in the MP Table as active-low in addition to level
triggered.
Reviewed by: neel
- Implement the PM1_EVT and PM1_CTL registers required by ACPI.
The PM1_EVT register is mostly a dummy as bhyve doesn't support any
of the hardware-initiated events. The only bit of PM1_CNT that is
implemented are the sleep request bits (SPL_EN and SLP_TYP) which
request a graceful power off for S5. In particular, for S5, bhyve
exits with a non-zero value which terminates the loop in vmrun.sh.
- Emulate the Reset Control register at I/O port 0xcf9 and advertise
it as the reset register via ACPI.
- Advertise an _S5 package.
- Extend the in/out interface to allow an in/out handler to request
that the hypervisor trigger a reset or power-off.
- While here, note that all vCPUs in a guest support C1 ("hlt").
Reviewed by: neel (earlier version)
- Add a generic routine to trigger an LVT interrupt that supports both
fixed and NMI delivery modes.
- Add an ioctl and bhyvectl command to trigger local interrupts inside a
guest. In particular, a global NMI similar to that raised by SERR# or
PERR# can be simulated by asserting LINT1 on all vCPUs.
- Extend the LVT table in the vCPU local APIC to support CMCI.
- Flesh out the local APIC error reporting a bit to cache errors and
report them via ESR when ESR is written to. Add support for asserting
the error LVT when an error occurs. Raise illegal vector errors when
attempting to signal an invalid vector for an interrupt or when sending
an IPI.
- Ignore writes to reserved bits in LVT entries.
- Export table entries the MADT and MP Table advertising the stock x86
config of LINT0 set to ExtInt and LINT1 wired to NMI.
Reviewed by: neel (earlier version)
state before the requested state transition. This guarantees that there is
exactly one ioctl() operating on a vcpu at any point in time and prevents
unintended state transitions.
More details available here:
http://lists.freebsd.org/pipermail/freebsd-virtualization/2013-December/001825.html
Reviewed by: grehan
Reported by: Markiyan Kushnir (markiyan.kushnir at gmail.com)
MFC after: 3 days
location of /etc/rc.local on the install media is more appropriate as it
knows serial vs. non-serial and can also do the change earlier (so that
even the initial Install dialog can benefit from the change).
MFC after: 3 days
installation to 3-4+ (depending on vdev type) vdevs would result in odd
error messages where the zpool `create' command appeared to repeat itself
(an artifact of printf when you supply too many arguments -- caused by
neglecting to properly quote the multi-word expansion of $*vdevs when
creating the pool(s)). Example error below (taken from bsdinstall_log):
DEBUG: zfs_create_boot: Creating root pool...
DEBUG: zfs_create_boot: zpool create -o altroot=/mnt -m none -f "zroot" \
ada0p3.nop ada1p3.nopzpool create ada2p3.nop "ada3p3.nop"
DEBUG: zfs_create_boot: retval=1 <output below>
cannot open 'ada1p3.nopzpool': no such GEOM provider
DEBUG: Running installation step: hostname
rm: /tmp/bsdinstall_etc/fstab: No such file or directory
The two lines are unrelated, and the rm is spurious. Let's add `-f' to
that rm(1) so it doesn't confuse us when debugging an install.
MFC after: 3 days
should not have used DIALOG_CANCEL because dialog.subr wasn't included to
define it. The effect of the error was that you could not cancel the
partition dialog. Discovered by checking bsdinstall_log for something else.
MFC after: 3 days
callers treat the MSI 'addr' and 'data' fields as opaque and also lets
bhyve implement multiple destination modes: physical, flat and clustered.
Submitted by: Tycho Nightingale (tycho.nightingale@pluribusnetworks.com)
Reviewed by: grehan@
required in such a case). But don't prevent the user from pointing the
gun at his/her foot -- you can disable 4k alignment after enabling geli).
MFC after: 3 days
and subsequent headaches caused by multiple pools with the same name.
Specifically, blast away any labels on the designated swap partition.
Problem was when you install to a given layout *with* swap and then turn
around and re-install the same layout *without* swap (we weren't doing a
labelclear for the swap device, so would end up with an "UNAVAIL" status
zroot pool that may only exist in the pool cache).
MFC after: 3 days
+ For GPT, always provision zfs# partition after swap [for resizability]
+ For MBR, always use a boot pool to relialy place root vdevs at EOD
NB: Fixes edge-cases where MBR combination failed boot (e.g. swap-less)
+ Generalize boot pool logic so it can be used for any scheme (namely MBR)
+ Update existing comments and some whitespace fixes
+ Change some variable names to make reading/debugging the code easier
in zfs_create_boot() (namely prepend zroot_ or bootpool_ to property)
+ Because zroot vdevs are at EOD, no longer need to calculate partsize
(vdev consumes remaining space after allocating swap)
+ Optimize processing of disks -- no reason to loop over the disks 3-4
separate times when we can logically use a single loop to do everything
Discussed on: -stable
MFC after: 3 days
+ De-obfuscate debugging to show actual values
+ Change graid(8) syntax; s/destroy/delete/ [destroy is not invalid syntax]
+ Log commands that were previously quiet
+ Added some new comemnts and updated some existing ones
+ Add missing local for `disk' used in zfs_create_boot()
+ Use $disks instead of multiply-expanding $* in zfs_create_boot()
+ Pedantically unset variable holding geli(8) passphrase after use
+ Pedantically add double-quotes around zpool names and zfs datasets
+ Fix quotation expansion for zpool_cache entries of loader.conf(5)
+ Some limited whitespace changes
MFC after: 3 days
https://communities.vmware.com/thread/107230https://communities.vmware.com/docs/DOC-11677
Basically, ignore the ``function 62'' and ``function 63'' interpretations
of the left/right command key when we're in the lengthiest portion of the
installation (initiated by the `auto' module).
The net effect is that you can now (once you've started the installer from
the media) escape the VM without prematurely terminating the current action
due to spurious escape sequence.
MFC after: 3 days
installation is cdrom. This enables bsdconfig(8) to make use
of the on-disc pkg(8) repository configuration, which fixes
package selection and installation from the dvd installer.
MFC after: 3 days
M-MFC-With: r259426
X-MFC-Before: -RC3
Sponsored by: The FreeBSD Foundation
===
DEBUG: Running installation step: services
local: Not in a function
/usr/libexec/bsdinstall/services: cannot create : Read-only file system
/usr/libexec/bsdinstall/services: /tmp/bsdinstall/etc/rc.conf.services: \
Permission denied
===
The `local: Not in a function' is obvious, and was introduced by myself in
SVN revision 256348.
The latter two are caused by the attempt to use "\" to continue the line
after using the ">>" redirect. This appears to attempt to write a file with
the name " " in the current directory and subsequently attempts to execute
the file that was originally intended for writing (which is not executable;
hence the `Permission denied'). That was introduced in SVN r228192 about
2 years ago, apparently unnoticed until I started going over the debug
outputs very carefully.
MFC after: 3 days
This will read the REPOS_DIR env/config setting (default is /etc/pkg
and /usr/local/etc/pkg/repos) and use the last enabled repository.
This can be changed in the environment using a comma-separated list,
or in /usr/local/etc/pkg.conf with JSON array syntax of:
REPOS_DIR: ["/etc/pkg", "/usr/local/etc/pkg/repos"]
Approved by: bapt
MFC after: 1 week
would either exit on assertion, or, if assertions are not enabled,
fail to authenticate the target.
MFC after: 2 days
Sponsored by: The FreeBSD Foundation
