run quite reliably now. I've explicitly tagged them as /* XXX overkill? */
although one does actually check for VM_PROT_EXECUTE.
Based on a suggestion by: Dmitrij Tejblum <tejblum@arc.hq.cti.ru>
Zap symbols.raw and glue to make symbols.* - it's not used on the ELF-only
alpha kernel. Symbol sorting is dead-end anyway once libkvm uses the
in-kernel linker symbol lookup.
if LK_RECURSIVE is not set, as we will simply return that the
lock is busy and not actually deadlock. This allows processes
to use polling locks against buffers that they may already
hold exclusively locked.
can cause a biodone() from a disk interrupt to spin when the interrupt
code tries to grab the simplelock. Masking BIO here means buftimelock
and/or lk->lk_interlock shouldn't be held when an interrupt tries to grab
them.
lockmgr locks. This commit should be functionally equivalent to the old
semantics. That is, all buffer locking is done with LK_EXCLUSIVE
requests. Changes to take advantage of LK_SHARED and LK_RECURSIVE will
be done in future commits.
exit on errors.
If we don't, in_pcbrehash() is called without a preceeding
in_pcbinshash(), causing a crash.
There are apparently several conditions that could cause the crash;
PR misc/12256 is only one of these.
PR: misc/12256
The attached diff attempts to eliminate as much of the difference
between the i386 and the pc98 version of the file as possible. It
should not make any semantic difference (it consists of whitespace
changes, order changes, comment changes, changes of case for hex
constants, and merging in a couple of constants that hadn't made it
from the i386 version.)
Submitted by: eivind
This caused a panic in rtfreee() called with a root node from the
routing socket code (when processing a RTM_GET message looking for
the default route while there is none).
Since no existing code seems to have any use getting the root node
from rn_match(), it seems cleaner never to return it rather than
check for this condition at the caller's.
PR: kern/12265
The atapi subsystem has gotten better error handeling and timeouts,
it also tries a REQUEST SENSE command when devices returns errors,
to give a little more info as to what went wrong. It might be a
little verbose for now, but I'm interested in as much feedback on
errors as possible, especially timeouts, as I'm a bit in doubt if
I've chosen resonable default values everywhere.
The disk driver has been changed a bit to prepare for tagged queing,
which is next on my list.
The disk driver has grown a dump routine, I got one implementation
from Darrell Anderson <anderson@cs.duke.edu> which also did
partial dumps (usefull on big memory machines) I left out the
partial stuff for now, and changed the rest alot to fit into the new
ad_request framework.
Some minor cleanups and rearrangements as well.
As usual USE AT YOUR OWN RISK!!, this is still pre alpha level code.
Especially the DMA support can hose your disk real bad if anything
goes wrong, again you have been warned :)
Notebook owners should be carefull that their machines dont suspend
as this might cause trouble...
But please tell me how it works for you!
Enjoy!
-Søren
and insertion should affect the line the cursor is on only.
This change should have been committed together with syscons.c rev 1.308.
(I forgot to do so, when I committed syscons.c :-(
Pointed out by: sos
If the drive goes down, queue a close to the daemon. In many cases
this function gets called in process context, so it could do it
directly, but it's more trouble finding out where we came from than
getting the daemon to do it.
Don't bzero the buffer structure, it's been done already by
allocrqg.
sdio:
Build up a correct buffer header, don't steal linkages from system
buffer headers.
Noticed-by: mckusick
1. Rise is recognized in identdcpu.c.
2. The TSC is not written to. A workaround for the CPU bug is being
applied to clock.c (the bug being that the mP6 has TSC enabled
in its CPUID-capabilities, but it only supports reading it. If we
try to write to it (MSR 16), a GPF occurs.) The new behavior is that
FreeBSD will _not_ zero the TSC. Instead, we do a bit of 64-bit
arithmetic.
Reviewed by: msmith
Obtained from: unfurl & msmith
wfd driver code tries to give wd driver first crack at ioctl's,
but incorrectly interprets internal error and never gets to send
eject to ATAPI device.
(this is fixed in the atapi-fd driver)
PR: kern/12218
Submitted by: Simon Walton <simonw@cinesite.com>
* Conformance with Dingo specification. This includes:
Collision/error statistics gathering.
Multicast address filtering, eg. the hash filter.
Initialisation and interrupt handling sequences.
Note that I've started on some of this already in v1.20.
* The probe routine needs some more work, to identify oddities such as the
REM10.
* There are still problems with the autonegotiation code; specifically, it
won't autonegotiate with some 10/100 hubs. This might simply be the hardware
not getting along, in which case there's nothing we can do, but it's still
worth investigating
* CEM28/CEM33 support. Should be able to integrate this directly from the
Linux code.
* Performance enhancements:
Full-duplex on 10Mbit networks.
Virtual shared-memory mode.
Early send and receive modes.
Developed by: Scott Mitchell <scott@uk.freebsd.org>
Obtained from: http://www.freebsd-uk.eu.org/~scott/xe_drv/
* Conformance with Dingo specification. This includes:
Collision/error statistics gathering.
Multicast address filtering, eg. the hash filter.
Initialisation and interrupt handling sequences.
Note that I've started on some of this already in v1.20.
* The probe routine needs some more work, to identify oddities such as the
REM10.
* There are still problems with the autonegotiation code; specifically, it
won't autonegotiate with some 10/100 hubs. This might simply be the hardware
not getting along, in which case there's nothing we can do, but it's still
worth investigating
* CEM28/CEM33 support. Should be able to integrate this directly from the
Linux code.
* Performance enhancements:
Full-duplex on 10Mbit networks.
Virtual shared-memory mode.
Early send and receive modes.
Developed by: Scott Mitchell <scott@uk.freebsd.org>
Obtained from: http://www.freebsd-uk.eu.org/~scott/xe_drv/
- Split syscons source code into manageable chunks and reorganize
some of complicated functions.
- Many static variables are moved to the softc structure.
- Added a new key function, PREV. When this key is pressed, the vty
immediately before the current vty will become foreground. Analogue
to PREV, which is usually assigned to the PrntScrn key.
PR: kern/10113
Submitted by: Christian Weisgerber <naddy@mips.rhein-neckar.de>
- Modified the kernel console input function sccngetc() so that it
handles function keys properly.
- Reorganized the screen update routine.
- VT switching code is reorganized. It now should be slightly more
robust than before.
- Added the DEVICE_RESUME function so that syscons no longer hooks the
APM resume event directly.
- New kernel configuration options: SC_NO_CUTPASTE, SC_NO_FONT_LOADING,
SC_NO_HISTORY and SC_NO_SYSMOUSE.
Various parts of syscons can be omitted so that the kernel size is
reduced.
SC_PIXEL_MODE
Made the VESA 800x600 mode an option, rather than a standard part of
syscons.
SC_DISABLE_DDBKEY
Disables the `debug' key combination.
SC_ALT_MOUSE_IMAGE
Inverse the character cell at the mouse cursor position in the text
console, rather than drawing an arrow on the screen.
Submitted by: Nick Hibma (n_hibma@FreeBSD.ORG)
SC_DFLT_FONT
makeoptions "SC_DFLT_FONT=_font_name_"
Include the named font as the default font of syscons. 16-line,
14-line and 8-line font data will be compiled in. This option replaces
the existing STD8X16FONT option, which loads 16-line font data only.
- The VGA driver is split into /sys/dev/fb/vga.c and /sys/isa/vga_isa.c.
- The video driver provides a set of ioctl commands to manipulate the
frame buffer.
- New kernel configuration option: VGA_WIDTH90
Enables 90 column modes: 90x25, 90x30, 90x43, 90x50, 90x60. These
modes are mot always supported by the video card.
PR: i386/7510
Submitted by: kbyanc@freedomnet.com and alexv@sui.gda.itesm.mx.
- The header file machine/console.h is reorganized; its contents is now
split into sys/fbio.h, sys/kbio.h (a new file) and sys/consio.h
(another new file). machine/console.h is still maintained for
compatibility reasons.
- Kernel console selection/installation routines are fixed and
slightly rebumped so that it should now be possible to switch between
the interanl kernel console (sc or vt) and a remote kernel console
(sio) again, as it was in 2.x, 3.0 and 3.1.
- Screen savers and splash screen decoders
Because of the header file reorganization described above, screen
savers and splash screen decoders are slightly modified. After this
update, /sys/modules/syscons/saver.h is no longer necessary and is
removed.
fix; it doesn't address the problem of removing the module. If you do
the following:
vinum stop
fsck /dev/vinum/VOLUME
you *will* get a system crash. What we need is a cdevsw_remove
corresponding to cdevsw_add, but that hasn't been written yet.
Submitted-by: phk
at which we may sleep. So, after completing our buffer allocation
we must ensure that another process has not come along and allocated
a different buffer with the same identity. We do this by keeping a
global counter of the number of buffers that getnewbuf has allocated.
We save this count when we enter getnewbuf and check it when we are
about to return. If it has changed, then other buffers were allocated
while we were in getnewbuf, so we must return NULL to let our parent
know that it must recheck to see if it still needs the new buffer.
Hopefully this fix will eliminate the creation of duplicate buffers
with the same identity and the obscure corruptions that they cause.
This should resolve the problem raised in PR 12315, and incidentally
makes it easier to determine what geometry the BIOS is actually using
(by way of boot -v and dmesg).
done is less-than cute, but this whole file is suffering from some amount
of bitrot. Execution of zipped files should probably be implemented in a
manner similar to that of #!/interpreted files.
PR: kern/10780
usbd_get_interface_descriptor
2) remove soft reset. It's been dropped from the USB Mass Storage Bulk-Only
Specification
3) move the clear feature halt to the reset routine.
few changes:
- there was a bug in rl_list_tx_init(): it was calculating the registers
to initialize incorrectly. Not a problem on the x86 where unaligned
access are allowed, but a problem on the alpha.
- set rl_btag accordingly depending on the machine type
- rl_rxeof() needs to be sure to longword-align the packet data. This
is a little tricky since we copy the data out of the receive buffer
using m_devget(), however there's no way to tell m_devget() to fill
in the mbufs starting at a particular offset. To get around this,
we tell m_devget to copy bytes+2 bytes starting at offset offset-2. This
results in the proper alignment, and we can trim off the two leading
bytes afterwards with m_adj(). We also allocate some extra space before
the start of the receive buffer so that we don't get into trouble in
the case where offset == 0.
- redefine vtophys() in if_rlreg.h for the alpha.
Making this chipset work on the alpha is sort of the inverse of putting
a jet engine on a rowboat (putting a propeller on a 747?) but when
you can get these things for $5 a pop, it's hard to stop people from
buying them.
mount point for seeing whether or not the new nfsnode is already in the
hash queue. We're pretty much guaranteed that the old nfsnode is already
in the hash queue. Wank! Infinite Loop! Looks like just a minor typo....
(ah the influence of fortran ... np && np2... why not nfsnode_the_first &&
nfsnode_the_second???)...
This is inteded for to allow ifconfig to print various unstructured
information from an interface.
The data is returned from the kernel in ASCII form, see the comment in
if.h for some technicalities.
Canonical cut&paste example to be found in if_tun.c
Initial use:
Now tun* interfaces tell the PID of the process which opened them.
Future uses could be (volounteers welcome!):
Have ppp/slip interfaces tell which tty they use.
Make sync interfaces return their media state: red/yellow/blue
alarm, timeslot assignment and so on.
Make ethernets warn about missing heartbeats and/or cables
positively not let ti_encap() fill up the TX ring all the way and wrap
around. This fixes a potential transmit lockup where a really fast
machine (or particular TX traffic pattern) can overrun the end of the
ring.
Reported by: John Plevyak <jplevyak@inktomi.com>
This is tested, but I really can't say whether it works entirely. I
don't know exactly what to look for when testing it. So let's say this
is open for testing. Send any results to green@FreeBSD.org
Reviewed by: msmith (long ago)
sure that i686_mem was only used when
1. CPUID had MTRR set (this was there before)
2. the CPU was GenuineIntel (not there)
3. the CPU is a 686 (also not there)
This should prevent any problems with CPUs that set MTRR but aren't
compatibile with Intel's interface (none that I know of yet.)
uni-directional parallel port should use olpt driver instead of lpt
driver.
Files ppc.c and ppcreg.h are copied form i386/isa directory with PC98
change.
Submitted by: Akio Morita <amorita@meadow.scphys.kyoto-u.ac.jp>
automatically hacks on the active copy of the IDT if f00f_hack()
has changed it. This also allows simplifications in setidt().
This fixes breakage of FP exception handling by rev.1.55 of
sys/kernel.h. FP exceptions were sent to npx.c's probe handlers
because npx.c "restored" the old handlers to the wrong copy of the
IDT. The SYSINIT for f00f_hack() was purposely run quite late to
avoid problems like this, but it is bogusly associated with the
SYSINIT for proc0 so it was moved with the latter.
Problem reported and fix tested by: Martin Cracauer <cracauer@cons.org>
This is the change to struct sockets that gets rid of so_uid and replaces
it with a much more useful struct pcred *so_cred. This is here to be able
to do socket-level credential checks (i.e. IPFW uid/gid support, to be added
to HEAD soon). Along with this comes an update to pidentd which greatly
simplifies the code necessary to get a uid from a socket. Soon to come:
a sysctl() interface to finding individual sockets' credentials.
creating a new entry. vm_map_stack and vm_map_growstack can panic when
a new entry isn't created. Fixed vm_map_stack and vm_map_growstack.
Also, when extending the stack, always set the protection to VM_PROT_ALL.
like the original PNIC and the MX98715A (from which the PNIC II is derived).
This requires special handling. Save the card type, and in mx_calchash(),
if we see that the card is a PNIC, return only the low 7 bits of the
hash instead of the low 9 bits.
would occur when clustering them - caused by running out of buffers
and taking a degenerate code path as a result. It appears that waiting
instead for buffers to become available is okay.
Submitted by: Matthew Dillon <dillon@apollo.backplane.com>
Discovered by: Craig A Soules <soules+@andrew.cmu.edu>
make sure we've freed any allocated resources (to avoid a memory leak)
and and do the right thing with respect to the nfs node hash lock we'd
acquired.
Also add offsets into the IDE parameter block so that it is humanly
possible to match the structure to the manufacturer's documentation.
(basically this is just changes to comments)
but it's more complex, and in his words
Commit your version, since it is the only one that is clearly permitted
(if not best), and I'll untangle it later.
PR: docs/11589
Reviewed by: Bruce "he kicks ass" Evans
support is compiled in)
2) Add probing for generic USB host controllers as well so we get them all
3) make the returned strings look alike in the whole file
Also removed the BSDI support (for now)
This allows the driver to be loaded/unloaded as a KLD
and loaded in the boot loader phase whithout making a custom kernel.
- this causes POSIX locking to use the thread group leader
(p->p_leader) as the locking thread for all advisory locks.
In non-kernel-threaded code p->p_leader == p, so this will have
no effect.
This results in (more) correct POSIX threaded flock-ing semantics.
It also prevents the leader from exiting before any of the children.
(so that p->p_leader will never be stale) in exit1().
We have been running this patch for over a month now in our lab
under load and at customer sites.
Submitted by: John Plevyak <jplevyak@inktomi.com>
