This interface type ("a parent interface of wlanX") is not used since
r287197
Reviewed by: adrian, glebius
Differential Revision: https://reviews.freebsd.org/D9308
driver to support exposing a GEOM device, which can be used to mount
Avalon-attached ROMs, reserved areas of DRAM, etc, as a filesystem:
commit 9deb1e60eaaaf7a3687e48c58af5efd756f32ec6
Author: Robert N. M. Watson <robert.watson@cl.cam.ac.uk>
Date: Sat Mar 5 20:33:12 2016 +0000
Use format strings with make_dev(9) in avgen(4).
commit 0bf2176c23e7425bfa042c08a24f8a25fe6d8885
Author: Robert N. M. Watson <robert.watson@cl.cam.ac.uk>
Date: Tue Mar 1 10:23:23 2016 +0000
Implement a new "geomio" configuration argument to altera_avgen(4),
the generic I/O device we attach to various BERI peripherals. The new
option requests that, instead of exposing the underlying device via a
special device node in /dev, it instead be exposed via geom(4),
allowing it to be used with filesystems. The current implementation
does not allow a device to be exposed both for file/mmap and geom, so
one of the two models must be selected when configuring it via FDT or
device.hints. A typical use of the new option will be:
sri-cambridge,geomio = "rw";
MFC after: 1 week
Sponsored by: DARPA, AFRL
CheriBSD, which attempt to work around an inherent race in the UART's
control-register design in detecting whether JTAG is currently,
present, which will otherwise lead to moderately frequent output
drops when running in polled rather than interrupt-driven operation.
Now, these drops are quite infrequent.
commit 9f33fddac9215e32781a4f016ba17eab804fb6d4
Author: Robert N. M. Watson <robert.watson@cl.cam.ac.uk>
Date: Thu Jul 16 17:34:12 2015 +0000
Add a new sysctl, hw.altera_jtag_uart.ac_poll_delay, which allows the
(default 10ms) delay associated with a full JTAG UART buffer combined
with a lack of a JTAG-present flag to be tuned. Setting this higher
may cause some JTAG configurations to be more reliable when printing
out low-level console output at a speed greater than the JTAG UART is
willing to carry data. Or it may not.
commit 73992ef7607738b2973736e409ccd644b30eadba
Author: Robert N. M. Watson <robert.watson@cl.cam.ac.uk>
Date: Sun Jan 1 15:13:07 2017 +0000
Minor improvements to the Altera JTAG UART device driver:
- Minor rework to the logic to detect JTAG presence in order to be a bit
more resilient to inevitable races: increase the retry period from two
seconds to four seconds for trying to find JTAG, and more agressively
clear the miss counter if JTAG has been reconnected. Once JTAG has
vanished, stop prodding the miss counter.
- Do a bit of reworking of the output code to frob the control register
less by checking whether write interrupts are enabled/disabled before
changing their state. This should reduce the opportunity for races
with JTAG discovery (which are inherent to the Altera
hardware-software interface, but can at least be minimised).
- Add statistics relating to interrupt enable/disable/JTAG
discovery/etc.
With these changes, polled-mode JTAG UART ttys appear substantially
more robust.
MFC after: 1 week
Sponsored by: DARPA, AFRL
Thank glebius for pointing this out:
"The network stuff shall not be added to sys/eventhandler.h"
Reviewed by: David_A_Bright_DELL.com, sephe, glebius
Approved by: sephe (mentor)
MFC after: 2 weeks
Sponsored by: Microsoft
Differential Revision: https://reviews.freebsd.org/D9345
default, and the fewer changes relative to the upstream u-boot the
better.
Add compatibility links for the old names.
Add dts file for BeagleBone Green while we're here.
Upstream GCC and devel/mips64-gcc use "octeon+" as the CPU setting for
the Octeon processor in the EdgeRouter Lite. As of r312899 the base
system GCC 4.2.1 accepts octeon+ as an alias for the Octeon support
added in r208737 for the same CPU.
Sponsored by: The FreeBSD Foundation
regardless of what the default stack for the system is set to.
With current/default behavior, after changing the default tcp stack, the
application needs to be restarted to pick up that change. Setting this new knob
net.inet.tcp.functions_inherit_listen_socket_stack to '0' would change that
behavior and make any new connection use the newly selected default tcp stack.
Reviewed by: rrs
MFC after: 2 weeks
Sponsored by: Limelight Networks
We found routing performance dropped significantly when configuring
FreeBSD as a router, we are applying the following changes in order to
resolve those issues and hopefully perform better.
- don't prefetch the flags array, we usually don't need it
- prefetch the next cache line of each of the software descriptor arrays as
well as the first cache line of each of the next four packets' mbufs and
clusters
- reduce max copy size to 63 bytes
- convert rx soft descriptors from array of structures to a structure of arrays
- update copyrights
Submitted by: Matt Macy <mmacy@nextbsd.org>
undo_offload_socket() is only called by t4_connect() during a connection
setup failure, but t4_connect() still owns the TOE PCB and frees ita
after undo_offload_socket() returns. Release a reference in
undo_offload_socket() resulted in a double-free which panicked when
t4_connect() performed the second free. The reference release was
added to undo_offload_socket() incorrectly in r299210.
MFC after: 1 week
Sponsored by: Chelsio Communications
FASTTRAP_MAX_INSTR_SIZE is the largest valid value of a tracepoint, so
correct the assertion accordingly. This limit was hit with a 15-byte NOP.
Reported by: bdrewery
MFC after: 1 week
Sponsored by: Dell EMC Isilon
The intended use is to annotate frequently used globals which either rarely
change (and thus can be grouped in the same cacheline) or are an atomic counter
(which means it may benefit from being the only variable in the cacheline).
Linker script support is provided only for amd64. Architectures without it risk
having other variables put in, i.e. as if they were not annotated. This is
harmless from correctness point of view.
Reviewed by: bde (previous version)
MFC after: 1 month
Recent changes in the pseudo header accessor prototypes start to
use common code RxQ handle on datapath. The handle was located
at the end of the structure with members not used on datapath.
Reviewed by: philip
Sponsored by: Solarflare Communications, Inc.
MFC after: 2 days
Differential Revision: https://reviews.freebsd.org/D9359
TxQ is destroyed on stop and last used tag should be reset to default 0
on the next start.
Reviewed by: philip
Sponsored by: Solarflare Communications, Inc.
MFC after: 2 days
Differential Revision: https://reviews.freebsd.org/D9358
The MLX5 driver has four different types of DMA allocations which are
now allocated using busdma:
1) The 4K firmware DMA-able blocks. One busdma object per 4K allocation.
2) Data for firmware commands use the 4K firmware blocks split into four 1K blocks.
3) The 4K firmware blocks are also used for doorbell pages.
4) The RQ-, SQ- and CQ- DMA rings. One busdma object per allocation.
After this patch the mlx5en driver can be used with DMAR enabled in
the FreeBSD kernel.
MFC after: 1 week
Sponsored by: Mellanox Technologies
- When device disappears from PCI indicate error device state and:
1) Trigger command completion for all pending commands
2) Prevent new commands from executing and return:
- success for modify and remove/cleanup commands
- failure for create/query commands
3) When reclaiming pages for a device in error state don't ask FW to
return all given pages, just release the allocated memory
MFC after: 1 week
Sponsored by: Mellanox Technologies
PCI device(s), changes:
- alloc_entry() now clears bit for page slot entry aswell
- update of cmd->ent_arr[] is now under cmd->alloc_lock
- complete command if alloc_entry() fails
MFC after: 1 week
Sponsored by: Mellanox Technologies
By default reading the diagnostic counters is disabled. The firmware
decides which counters are supported and only those supported show up
in the dev.mce.X.diagnostics sysctl tree.
To enable reading of diagnostic counters set one or more of the
following sysctls to one:
dev.mce.X.conf.diag_general_enable=1
dev.mce.X.conf.diag_pci_enable=1
MFC after: 1 week
Sponsored by: Mellanox Technologies
consistent return values from the mlx5e_sq_has_room_for()
function. The two counters are incremented by different threads under
different locks.
MFC after: 1 week
Sponsored by: Mellanox Technologies
register, in addition to configuring it as input with the pinmux driver.
There was a control register bit commented as "no desc in datasheet". A
later revision of the manual reveals the bit to be an input/output control
for the timer pin. In addition to configuring capture or pulse mode, you
apparently have to separately configure the pin direction in the timer
control register.
Before this change, the timer block was apparently driving a signal onto a
pad configured by pinmux as input. Capture mode still accidentally worked
for me during testing because I was using a very strong signal source that
just out-muscled the weaker drive from the misconfigured pin.
