154948 Commits

Author SHA1 Message Date
kib
9638e6cef5 Enable advisory file locking for devfs vnodes.
Reported by:	Timothy Redaelli <timothy redaelli eu>
MFC after:	1 week
2009-03-11 12:53:16 +00:00
phk
3a7c1a9846 One Pp is more than enough.
Says:	brueffer
2009-03-11 11:42:17 +00:00
phk
5af10de8b8 Some improvements to recoverdisk 2009-03-11 10:37:02 +00:00
yongari
f1ee91324d Replace local CRC32 routine with ether_crc32_be(). This should
have happened long time ago. Also simplify Rx filter logic.
2009-03-11 09:57:11 +00:00
yongari
47e35ac4a2 s/u_int8_t/uint8_t/g
s/u_int16_t/uint16_t/g
s/u_int32_t/uint32_t/g
s/u_int64_t/uint64_t/g
2009-03-11 09:06:39 +00:00
yongari
757b0a460d style(9) - space after keywords. 2009-03-11 08:49:17 +00:00
yongari
19903345aa Remove return statement at the end of function that returns void. 2009-03-11 08:41:57 +00:00
yongari
e40de1b646 Remove extra tab characters. 2009-03-11 08:28:24 +00:00
yongari
6618b14491 K&R -> ANSI C function definitions. 2009-03-11 08:25:18 +00:00
imp
61d6068fc6 Minor nits notice by jhb@ 2009-03-11 08:19:31 +00:00
imp
13986d5ca0 Remove old compat method that's no longer needed (and hasn't been
since just before 6.0).
2009-03-11 08:15:17 +00:00
imp
b8eb062502 Allow zero length memroy space descriptor sections. It is apparently
legal in the spec.  Add newline to the verbose messages we print when
debugging when this happens.  The Hitachi HT-4840-11 is the only card
to hit these in years, and it works well enough if we're liberal about
what we accept.
2009-03-11 08:14:44 +00:00
imp
9ce62c5ad1 Add support for Hitachi HT-4840-11. This card is supposedly just like
the J181, but not quite.  This card's CIS has some quirks that means
we have to ignore CFE's 1-9.
2009-03-11 08:12:28 +00:00
imp
a8b23b6811 Add entry for Hitachi HT-4840-11, which is a fe-based card. 2009-03-11 08:11:11 +00:00
imp
11e0f2f341 Add 3 new cards that I found today in akihabara...
Toshiba LANCT00A
TDK LAK-CD011
TJ PTJ-LAN/T PC-NIC ENCC 990010759-001A
2009-03-11 07:22:11 +00:00
kientzle
6b98ad97fb Hack: *Temporarily* disable reading extended attributes from disk, as
it seems to be badly broken on ZFS.
2009-03-11 05:11:57 +00:00
thompsa
a96a531e14 MFp4 //depot/projects/usb 158981,159016,159024
Sync support for ATMEGA DCI parts.

Submitted by:	Hans Petter Selasky
2009-03-11 04:58:21 +00:00
thompsa
02a143df1f Fix a possible NULL pointer access at controller attach.
Submitted by:	Hans Petter Selasky
2009-03-11 04:56:30 +00:00
nwhitehorn
95651d9cb6 Change the PVO zone for fictitious pages to the unmanaged PVO zone, to match
the unmanaged flag set in the PVO attributes. Without doing this,
pmap_remove() could try to remove fictitious pages (like those created
by mmap of physical memory) from the wrong UMA zone, causing a panic.

Reported by:	Justin Hibbits
MFC after:	1 week
2009-03-11 03:19:19 +00:00
sam
827e98884f o disallow write to RedBoot and FIS directory partitions; these are painful
to resurrect (maybe honor foot shooting bit in kern.geom_debugflags)
o fix match macro so we now recognize we want to merge FIS dir with RedBoot
  config parameters even if we don't actually do it
2009-03-11 01:12:52 +00:00
rwatson
fae6f1ab82 Add INP_INHASHLIST flag for inpcb->inp_flags to indicate whether
or not the inpcb is currenty on various hash lookup lists, rather
than using (lport != 0) to detect this.  This means that the full
4-tuple of a connection can be retained after close, which should
lead to more sensible netstat output in the window between TCP
close and socket close.

MFC after:	2 weeks
2009-03-11 00:29:22 +00:00
sam
fc149b72fe switch to !legacy usb stack 2009-03-11 00:12:45 +00:00
rwatson
9997d44640 Prefer ENETDOWN to ENXIO when returning queuing errors due to a link
down, interface down, etc, with if_cxgb's if_transmit routine.

MFC after:	3 days
Reviewed by:	kmacy
2009-03-10 22:35:45 +00:00
sam
4e26404a14 choose the size of the last region for d_stripsize instead of the first;
this fixes geom_redboot on boards that have multiple parts/regions as it
uses the value to locate the FIS directory which is in the last erase
region of flash
2009-03-10 22:29:42 +00:00
imp
7d9e6453e4 Restore blank line removed when fixing my earlier botch. Never do
just one last change before bed...

Pointy had to: imp
2009-03-10 22:04:52 +00:00
sam
e72559bcd4 configure flash support 2009-03-10 21:49:51 +00:00
sam
f9723c20c0 add IXP4XX_FLASH_SIZE config knob that can be used to override the default
flash size; this is necessary at the moment because we map all of flash at
boot, eventually we'll do this on the fly
2009-03-10 21:49:22 +00:00
sam
96c45a369c map CS0 on 2358 so flash is accessible 2009-03-10 21:47:17 +00:00
jhb
50289fd1c1 - Make maxpipekva a signed long rather than an unsigned long as overflow
is more likely to be noticed with signed types.
- Make amountpipekva a long as well to match maxpipekva.

Discussed with:	bde
2009-03-10 21:28:43 +00:00
jhb
c8dd604fc2 In the ABI shim for vfs.bufspace, rather than truncating values larger than
INT_MAX to INT_MAX, just go ahead and write out the full long to give an
error of ENOMEM to the user process.

Requested by:	bde
2009-03-10 21:27:15 +00:00
delphij
e7929cb0bc Reflect license change from NetBSD.
Obtained from:	NetBSD
2009-03-10 21:13:26 +00:00
thompsa
8f54fa169e Make sure HID has a default usage, this fixes recent mouse problems.
Tested by:	Renato Botelho
Tested by:	beech (earlier version)
Submitted by:	Hans Petter Selasky
2009-03-10 19:35:41 +00:00
sam
102dd06b50 mark device capable of vlan-size frames
Obtained from:	netbsd
2009-03-10 19:35:37 +00:00
gnn
73c9516af4 Update the Chelsio driver to the latest bits from Chelsio
Firmware upgraded to 7.1.0 (from 5.0.0).
T3C EEPROM and SRAM added; Code to update eeprom/sram fixed.
fl_empty and rx_fifo_ovfl counters can be observed via sysctl.
Two new cxgbtool commands to get uP logic analyzer info and uP IOQs
Synced up with Chelsio's "common code" (as of 03/03/09)

Submitted by:	 Navdeep Parhar at Chelsio
Reviewed by:	gnn
MFC after:	2 weeks
2009-03-10 19:22:45 +00:00
sam
4bac5fc418 turn off inclusion of FCS in rx'd frames; we don't use it anywhere and
dhclient gets annoyed when it receives FCS in frames via bpf
2009-03-10 19:18:11 +00:00
sam
384ed4accc o add missing bus_release_resource and bus_deactivate_resource that just
operate on the resource (we have no local resources to manage); this
  fixes drivers that alloc/release resources in their probe method and
  then do it again in attach
o while here add some prints to catch failures and massage style a bit
2009-03-10 19:15:35 +00:00
jhb
62fc1c4fbf - Remove code to set SAVENAME for CREATE or RENAME requests that get a -ve
hit in the name cache.  cache_lookup() doesn't actually return ENOENT
  for such requests to force the filesystem to do an explicit lookup, so
  this was effectively dead code.
- Grab the nfsnode mutex while writing to n_dmtime.  We don't grab the lock
  when comparing the time against the cached directory mod time (just as
  we don't when comparing ctime's for +ve name cache hits) since the
  attribute caching is already racy for NFS clients as it is.

Discussed with:	bde
2009-03-10 18:41:06 +00:00
rwatson
f0bf25503d Remove unused v6 macro aliases for inpcb fields:
in6p_ip6_nxt
        in6p_vflag
        in6p_flags
        in6p_socket
        in6p_lport
        in6p_fport
        in6p_ppcb

Remove unused v6 macro aliases for inpcb flags:

        IN6P_HIGHPORT
        IN6P_LOWPORT
        IN6P_ANONPORT
        IN6P_RECVIF
        IN6P_MTUDISC
        IN6P_FAITH
        IN6P_CONTROLOPTS

References to in6p_lport and in6_fport in sockstat are also replaced with
normal inp_lport and inp_fport references.

MFC after:	3 days
Reviewed by:	bz
2009-03-10 17:57:41 +00:00
gnn
c831f97201 Complete removal of cardbus_write_ivar which was left hanging. 2009-03-10 17:54:04 +00:00
bms
b00c7265e0 Don't print inm_print() chatter when KTR_IGMPV3 is not enabled
in the KTR_COMPILE mask.

Found by:	gnn
2009-03-10 17:48:49 +00:00
sam
500112f44a bring in ddb "show gpio" support from Cambria branch 2009-03-10 17:19:45 +00:00
sam
3d9037abb9 Small cleanup of memory resource allocation from Cambria branch:
o encode need for A4 bus space tag hackery according to the memory
  address; checking for "uart" breaks down with the GPS chip support
  which is also a uart but does not require the same hackery
o encode the correct memory window instead of carving up all of i/o
  space, potentially with a larger window than a device should have;
  this likely should be handled in the drivers by using a proper bus
  alloc call but since some drivers depend on the bus support to figure
  this out we cannot simply mod them
o add optional GPS and RS485 support (conditionally as the support
  isn't ready yet)
2009-03-10 17:16:16 +00:00
jhb
0849234614 - Remove a recently added comment from kernel_sysctlbyname() that isn't
needed.
- Move the release of the sysctl sx lock after the vsunlock() in
  userland_sysctl() to restore the original memlock behavior of
  minimizing the amount of memory wired to handle sysctl requests.

MFC after:	1 week
2009-03-10 17:00:28 +00:00
sam
3c6380766d catch up with r189306; handle delayed activation of resources
Submitted by:	jhb
2009-03-10 16:42:49 +00:00
thompsa
b7b3dfd998 Remove these files, they refer to module bundles that do not exist anymore. 2009-03-10 15:54:37 +00:00
thompsa
0a8a5a5f61 Update libusb.3 name and add mlinks for usb.3 and libusb20.3 2009-03-10 15:49:43 +00:00
jhb
0372a61a28 Add an ABI compat shim for the vfs.bufspace sysctl for sysctl requests that
try to fetch it as an int rather than a long.  If the current value is
greater than INT_MAX it reports a value of INT_MAX.
2009-03-10 15:26:50 +00:00
jhb
1d8bab3200 Update top and systat for vfs.bufcache now being a long rather than an int. 2009-03-10 15:25:19 +00:00
guido
887100e88a When attaching a geli on boot make sure that it is detached
upon last close. (needed for a gmirror to properly shutdown
upon reboot when a geli is on top the gmirror)
2009-03-10 15:23:43 +00:00
guido
6ff61b7dce When swap resides on a mirror and it is not stopped, the mirror
is degraded upon the next reboot and will have to be rebuild.
Thus call swapoff when rebooting (read: when stopping swap1)
2009-03-10 15:19:49 +00:00