- 6to4(stf) interface configuration.
- Static route configuration.
- Comment additions.
- Replaced a still existed '@' to '%' in IPv6 scoped addr format.
(This became necessary as previous IPv6 scoped addr format change.)
Much thanks to ume, who helped me reviewing, testing, and finding problems
with these changes.
Approved by: jkh
Reviewed by: ume
to avoid error messages printed on /var/log/messages.
Recently added "stf" interface has IFF_MULTICAST bit set,
because IPv6 don't work on non IFF_MULTICAST set interfaces
in current implementation.
But "stf" interface is multi-dest IPv6 over IPv4 tunnel, so
can't treat multicast packet with no special configuration.
On the other hand, tools like "rtadvd", "pim6dd", "pim6sd"
send messages on IFF_MULTICAST set interfaces by default.
So there will be many bogus error message on /var/log/messages,
that multicast packets sent to "stf0" failed.
So,
-strip "stf0" from rtadvd sending interfaces in rc.network6
("rtadvd" is a daemon used only for local subnet, so it
will never need to send its packets over "stf0" interfaces.)
-Add default configuration files for "pim6dd" and "pim6sd",
and disable "stf0" in those files.
Approved by: jkh
interfaces passed to rtadvd
-Comment out example sentences more completely
-Redirect error message of ifconfig output into /dev/null, to correctly
find out working IPv6 interfaces
Approved by: jkh
Initial version created by, and kindly much tested by:
bmah@CA.Sandia.GOV (Bruce A. Mah)
Approved by: jkh
Reviewed by: bmah@CA.Sandia.GOV (Bruce A. Mah),
Ollivier Robert <roberto@keltia.freenix.fr>
Obtained from: KAME project
Reviewed by: joerg
The isdnd is able to listen on a socket for isdnmonitor to connect to
it to remotely control it (similar to ppp and pppctl). When this is
enabled in the isdnd config file, it will fail currently because isdnd
is started before the network interfaces are configured.
It is necessary to move the isdnd start after the ifconfig of the network
interfaces, then this problem will not occur.
Changes are:
- rpc.umntall is called at the right places now in /etc/rc*
- rpc.umntall timeout has been lowered from two days (too high) to one
- verbose messages in rpc.umntall have been clarified
- kill double entries in /var/db/mounttab when rpc.umntall is invoked
- ${early_nfs_mounts} has been removed from /etc/rc
- patched mount(8) -p to print different pass/dump values for ufs filesystems.
(last patch recieved from dan <bugg@bugg.strangled.net>)
Submitted by: Martin Blapp <mbr@imp.ch>, dan <bugg@bugg.strangled.net>
in the 3.x branch. Also remove the dependency on /usr to find the
boot address/interface.
Mostly-submitted-abd-tested-by: MIHIRA Sanpei Yoshiro <sanpei@sanpei.org>
Currently we have a problem in that `dhclient' bails when configuring the
second interface as port 68 is already in use (by the `dhclient' started
for the first interface).
PR: 14810
Submitted by: n_hibma
daemons started. Move log_in_vain option there. It is needed to avoid
lot of connections to port 80 logged on production WWW server prior
Apache started from /usr/local/etc/rc.d
case instead of test where appropriate, since case allows case is a sh
builtin and (as a side-effect) allows case-insensitivity.
Changes discussed on freebsd-hackers.
Submitted by: Doug Barton <Doug@gorean.org>
* All variables are now embraced: ${foo}
* All comparisons against some value now take the form:
[ "${foo}" ? "value" ]
where ? is a comparison operator
* All empty string tests now take the form:
[ -z "${foo}" ]
* All non-empty string tests now take the form:
[ -n "${foo}" ]
Submitted by: jkh
respectively logging and dropping ICMP REDIRECT packets.
Note that there is no rate limiting on the log messages, so log_redirect
should be used with caution (preferrably only for debugging purposes).
Originally submitted by: Wayne Self <wself@cdrom.com>
Allow a ppp startup option in rc.conf.
Adjust sysinstall so that it appends to the end of ppp.conf
and uses the generated profile to start ppp in auto mode on
boot.
Submitted by: Josef L. Karthauser <joe@uk.FreeBSD.org>
get a list of interfaces, and then automatically configure them if
${ifconfig_${ifn}} or /etc/start_if.${ifn} exists.
This makes it a lot easier to deal with machines that constantly change
their network configuration as you can leave ifconfig settings for all
the possible cards - just the ones that are present will be configured.
and set it to "/etc/pccard.conf.sample" in /etc/defaults/rc.conf.
Perhaps this default value can be inappropriate,
but I set to this value for the convenience of PC-card boot.flp users.
Please correct it if there are better solutions.
Do discard standard output from the sysctl for approxy_all, and echo
what this sysctl is doing in the usual way. This fix is probably
backwards. We should probably just use the standard sysctl output
in all cases (it needs to have a newline filtered out).
Echo what the sysctls for nfs_reserved_port_only and nfs_access_cache
are doing.
default.
Despite their name it doesn't keep TCP sessions alive, it kills
them if the other end has gone AWOL. This happens a lot with
clients which use NAT, dynamic IP assignment or which has a 2^32
* 10^-3 seconds upper bound on their uptime.
There is no detectable increase in network trafic because of this:
two minimal TCP packets every two hours for a live TCP connection.
Many servers already enable keepalives themselves.
The host requirements RFC is 10 years old, and doesn't know about
the loosing clients of todays InterNet.
log_in_vain:
log_in_vain turns on logging for packets to ports for which
there is no listener.
rc.sysctl:
A generic way to set sysctl values. It reads /etc/syslog.conf
and sets values based on that. No /etc/syslog.conf has been
checked in yet, and I've not added this to the makefile yet
until I get more feedback.
Reviewed by: -current, -hackers and bde especially
