the old TTY implementation; however, take a cut at stripping its
optional Giant-protected code paths enabled using debug.cx.mpsafenet,
which will no longer work once IFF_NEEDSGIANT is removed.
join allocate() and dmainit() atapci subdriver's channel initialization
methods into single ch_attach() method.
As opposite to ch_attach() add new ch_detach() method to deallocate/disable
channel.
members for a kinfo entry on a process-wide system.
- Use the newly introduced function in order to fix cases like
KERN_PROC_PROC where aggregating stats are broken because they just
consider the first thread in the pool for each process.
(Note, additively, that KERN_PROC_PROC is rather inaccurate on
thread-wide informations like the 'state' of the process. Such
informations should maybe be invalidated and being forceably discarded
by the consumers?).
- Simplify the logic of sysctl_out_proc() and adjust the
fill_kinfo_thread() accordingly.
- Remove checks on the FIRST_THREAD_IN_PROC() being NULL but add
assertives.
This patch should fix aggregate statistics for KERN_PROC_PROC.
This is one of the reasons why top doesn't use this option and now it
can be use it safely.
ps, when launched in order to display just processes, now should report
correct cpu utilization percentages and times (as opposed by the old
code).
Reviewed by: jhb, emaste
Sponsored by: Sandvine Incorporated
it instead of overloading sbp_show_sdev_info().
replace calls to printf with calls to device_printf and cleanup debug
messages
Remove a bit of dead, commented out code.
Reviewed by: scottl(mentor)
MFC after: 2 weeks
- Update to firmware 1.4.39 for dual-chip NIC (10G-PCIE2-xxx)
support, and SFP+ i2c support
- Identify newer "B" NICs (10G-PCIEx-8B-x) correctly, rather than
mis-identifying them as "A" NICs (cosmetic only)
- Identify the IFM_10G_LRM ifmedia type, where applicable.
- Identify ifmedia types for SFP+ based NICs
- Update copyright
Sponsored by: Myricom
MFC after: 1 week
Deprecate unused phy_delay Self ID field as it was removed
by 1394a-2000.
Attempt to parse extended Self ID PHY packets if they are detected
Reviewed by: scottl (mentor)
MFC after: 2 weeks
interesting conditional printf's into single device_printf's
Change a couple of variable names so that I don't have to trace what they
acutally do anymore.
Enable the display of the Self ID PHY packet if firewire_debug > 0
Reviewed by: scottl(mentor)
MFC after: 2 weeks
Prior to this fix, IEVENT register was always cleared before calling
tsec_error_intr_locked(), which prevented error recovery actions from
happening with polling enabled (and could lead to serious problems, including
controller hang).
Submitted by: Marcin Ligenza marcinl ! pacomp dot com dot pl
- interrupt coalescing
- polling
- jumbo frames
- multicast
- VLAN tagging
The enhanced version of the chip (eTSEC) can also take advantage of:
- TCP/IP checksum calculation h/w offloading
Obtained from: Freescale, Semihalf
If speed of link between two devices is slower than the reported max
speed of both endpoints, the current driver will fail and be unable to
negotiate.
Summary:
Test negotiated speed by reading the CSRROM into a dummy variable.
If that read fails, decrement our speed and retry. If all else fails,
go to lowest speed possible(0).
Report speed to the user.
Add display of the Bus Info Block when debug.firewire_debug > 1
Support the Bus Info Block(1394a-2000) method of speed detection.
I also should note that I am moving "hold_count" to 0 for future
releases.
This variable determines how many bus resets to "hold" a removed
firewire device before deletion. I don't feel this is useful and will
probably drop support for this sysctl in the future.
Reviewed by: scottl(mentor)
MFC after: 2 weeks
almost once. After we've configured the devices that were present the
first time through, then we know that we're done. If the device has
other devices that are deferred, then it must do a similar dance.
This catches both PC Cards and CardBus cards.
to not allocate them after the recent ata channels enumeration changes.
It allows to save some resources, not bother user with unexisting hardware
and not check unimplemented ports status on every interrupt.
method allows schemes to reject the ctl request, pre-check
the parameters and/or modify/set parameters. There are 2
use cases that triggered the addition:
1. When implementing a R/O scheme, deletes will still
happen to the in-memory representation. The scheme is
not involved in that operation. The pre-check method
can be used to fail the delete up-front. Without this
the write to disk will typically fail, but at that
time the delete already happened.
2. The EBR scheme uses a linked list to record slices.
There's no index. The EBR scheme defines the index
as a function of the start LBA of the partition. The
add verb picks an index for the range and then invokes
the add method of the scheme to fill in the blanks. It
is too late for the add method to change the index.
The pre-check is used to set the index up-front. This
also (silently) overrides/nullifies any (pointless)
user-specified index value.
Works fine with AHCI and theoretically other MSI capable devices.
At this moment support disabled by default. To enable it, set
"hint.atapci.X.msi=1" device hint.
Add two new functions to the libusb20 API and required kernel ioctls.
- libusb20_dev_get_iface_desc
- libusb20_dev_get_info
New command to usbconfig, "show_ifdrv", which will print out the kernel driver
attached to the given USB device aswell.
See "man libusb20" for a detailed description.
Some minor style corrections long-line wrapping.
Submitted by: Hans Petter Selasky
- specification claims that 1 second is just a maximum controller reset time;
implement controller reset properly to save almost 1 second of boot, and
about half second of resume time;
- enable channel interrupts only after channel status reset to fix duplicate
device creation on resume due to unwanted device connection event;
- as described in specification, wait for disk ready status after channel
power-up; it is not so important when disk already touched by BIOS, but
solves device not ready problems on resume and probably some other cases.
- uncomment channel stop/start on soft-reset as it is declared mandatory by
specification; it was commented due to some random drive detection problems
on VIA and JMicron controllers, but I hope it is fixed by previous point.
If the file system backing a process' cwd is removed, and procstat -f PID
is called, then these messages would have been printed. The extra verbosity is
not required in this situation.
Requested by: kib
Approved by: kib
Move channel softc initialization from ata_XXX_probe() to ata_XXX_attach().
Instead of calculating ata channel number as position in child device list,
pass it's real number directly from controller probe routine using ivars.
It is simpler and IMHO more correct.
revealed that a process' current working directory can be VBAD if the
directory is removed. This can trigger a panic when procstat -f PID is
run.
Tested by: pho
Discovered by: phobot
Reviewed by: kib
Approved by: kib
Giving a charactere device execute permissions doesn't have any use.
Right now there isn't a single device node in /dev that has it, except
the USB2 device node, so remove it.
Approved by: hps, thompsa
longer do we require SCTP to be in the kernel for the
lib to be able to handle SCTP. We do this by moving
the CRC32c checksum into libkern/crc32.c and then adjusting
all routines to use the common methods. Note that this
will improve the performance of iSCSI since they were
using the old single 256 bit table lookup versus the
slicing 8 algorithm (which gives a 4x speed up in
CRC32c calculation :-D)
Reviewed by:rwatson, gnn, scottl, paolo
MFC after: 4 week? (assuming we MFC the alias_sctp changes)
fails to attach (possibly due to disable hints) then we get called back for
unload. Correctly handle the case where the keyboard isnt found rather than
calling panic.
- Make usb2_transfer_pending() part of the USB core header file.
- Make usb2_transfer_pending() NULL safe.
- Make sure that USB process functions return if the process has been drained.
- Remove two unused functions.
Submitted by: Hans Petter Selasky
name) (not sure whether this works correctly, but should be close).
Fix the stub attach phase for some Novatel cards. They expect the CSW
(repsonse to CBW, SCSI eject command) to be fetched before switching to
modem mode.
MFC after: 2 weeks
after the LLADDR is reclaimed which causes a null pointer deref with
inherit_mac enabled. Record the ifnet pointer of the interface and then compare
that to find when to re-assign the bridge address.
Submitted by: sam
Add a note next to fields in network format.
The n_* types are not enough for compiler checks on endianness, and their
use often requires an otherwise unnecessary #include <netinet/in_systm.h>
The typedef in in_systm.h are still there.
the correct behaviour (sorting by distance from the current head position
in the scan direction) and bioq_insert_head() and bioq_insert_tail()
have a well defined (and useful) behaviour, especially when intermixed
with calls to bioq_disksort().
In particular:
- fix a bug in the existing bioq_disksort() that did not use the
current head position correctly;
- redefine semantics of bioq_insert_head() and bioq_insert_tail().
bioq_insert_tail() can now be used as a barrier
between previous and subsequent calls to bioq_disksort().
The code is heavily documented in the source code so please refer
to that for the details.
Much of this code comes from Fabio Checconi. Also thanks to Kirk
for feedback on the (re)definition of bioq_insert_tail().
NOTE: in the current tree there is only a handful of files which
intermix calls to bioq_disksort() with bioq_insert_head() and
bioq_insert_tail(). The ordering of the queue in these situation
was not specified (nor easy to figure out) before, so I doubt any
of that code could be affected by the specification of the API.
Also note that the current implementation is significantly simpler
than the previous one (also used in ata_sort_queue()).
It would be useful to reimplement ata_sort_queue() using
the same code used in bioq_disksort().
MFC after: 1 week
a serial number, fall through to the next case so that initial negotiation
still happens. Without this, devices were showing up with only 1 available
tag opening, leading to observations of very poor I/O performance.
This should fix problems reported with VMWare Fusion and ESX. Early
generation MPT-SAS controllers with SATA disks might also be affected.
HP CISS controllers are also likely affected, as are many other
pseudo-scsi disk subsystems.
references to iv_bss and the sta table; this is equivalent and causes
direct reclaim of the old bss node when any references in packets inflight
are reclaimed (previously the old node would sit in the bss table until
the inactivity processing reclaimed it)
o remove ieee80211_node_reclaim now that it's only use is gone
Reviewed by: avatar, cbzimmer
parent interface tasks to complete. This had been added to the ioctl path but
it is also need elsewhere like detach so its safe to teardown.
Reported by: Hans Petter Selasky
Submitted by: sam
checked whether this applies to builds in /sys/*/compile/* as well):
- Create empty opt_*.h files were missing
- Hook up svr4 to the build. It compiles fine here, so no reason to
disconnect it in the Makefile. were missing
- Hook up svr4 to the build. It compiles fine here, so no reason to
disconnect it in the Makefile.
kernel. Rather than just kick off the page daemon, we actively retire
more mappings. The inner loop now looks a lot like the inner loop of
pmap_remove_all.
Also, get_pv_entry can't return NULL now, so remove panic if it did.
Reviewed by: alc@
- Always read the character device pointer while the associated devfs vnode
is locked. Also, use dev_ref() to obtain a new reference on the vnode for
the mountpoint. This reference is released on unmount. This mirrors the
earlier fix to FFS.
Reviewed by: kib
cleanup. Before the GEOM consumer would not have been closed.
- Bump the reference on the character device being mounted while the
associated devfs vnode is locked.
Reviewed by: kib
guaranteed to initialize its two last arguments. Therefore, there is a
warning in the subsequent caller ar5416FillVpdTable(), which doesn't
initialize those arguments.
Change getLowerUpperIndex() to assign values to indexL and indexR even
in the case of assertion failure.
Submitted by: Pavel Roskin <proski@gnu.org>
Just like the old TTY layer, the current MPSAFE TTY layer does not make
any attempt to serialize calls of write(). Data is copied into the
kernel in 256 (TTY_STACKBUF) byte chunks. If a write() call occurs at
the same time, the data may interleave. This is especially likely when
the TTY starts blocking, because the output queue reaches the high
watermark.
I've implemented this by adding a new flag, TTY_BUSY_OUT, which is used
to mark a TTY as having a thread stuck in write(). Because I don't want
non-blocking processes to be possibly blocked by a sleeping thread, I'm
still allowing it to bypass the protection. According to this message,
the Linux kernel returns EAGAIN in such cases, but I think that's a
little too restrictive:
http://kerneltrap.org/index.php?q=mailarchive/linux-kernel/2007/5/2/85418/thread
PR: kern/118287
from the parent to the child process if they have an operation vector
of &badfileops. This narrows a set of races involving system calls that
allocate a new file descriptor, potentially block for some extended
period, and then return the file descriptor, when invoked by a threaded
program that concurrently invokes fork(2). Similar approches are used
in both Solaris and Linux, and the wideness of this race was introduced
in FreeBSD when we moved to a more optimistic implementation of
accept(2) in order to simplify locking.
A small race necessarily remains because the fork(2) might occur after
the finit() in accept(2) but before the system call has returned, but
that appears unavoidable using current APIs. However, this race is
vastly narrower.
The fix can be validated using the newfileops_on_fork regression test.
PR: kern/130348
Reported by: Ivan Shcheklein <shcheklein at gmail dot com>
Reviewed by: jhb, kib
MFC after: 1 week
in 'sc_state'. This allows the lpt_release_ppbus() calls in those two
routines to actually release the ppbus and thus fixes the hangs noticed
with the lpt(4) driver since the recent ppbus changes. The old lpt(4)
driver didn't actually check the HAVEBUS flag in lpt_release_ppbus() which
is why these bugs weren't noticed before.
use patches so far:
+ Envy24:
- fix: broken init data for M Audio Delta DiO 2496
- add: support for M Audio Delta 44
- add: support for M Audio Delta 1010LT
Tested by: Dominique Goncalves, dominique.goncalves at gmail.com
- add: support for Terratec EWX 2496
Tested by: Stefan Sperling, stsp at stsp.name
- add: support for M Audio Delta 66
Tested by: Richard Bown, richard.bown at blueyonder.co.uk
- add: support for M Audio Delta 1010
Tested by: Andrew Reilly, areilly at bigpond.net.au
+ Envy24HT:
- add: support for Terrasoniq TS22PCI
- fix: M-Audio Revolution 5.1 sound volume is very low
Reported by: Oliver Hartmann, ohartman at zedat.fu-berlin.de
Andrey Slusar, anrays at gmail.com
Tested by: Andrey Slusar, anrays at gmail.com
Rusu Silviu, arol.the at gmail.com
- fix: M-Audio Revolution 7.1 sound is distorted and very quiet
Reported by: Olev Hannula, hannula at gmail.com
Tested by: Olev Hannula, hannula at gmail.com
Stanislav Belansky, stanislav at icmail.ru
- fix: Terratec PHASE 22 codec is power-off due to wrong init data
Reported by: Philipp Ost, pj at smo.de
Tested by: Philipp Ost, pj at smo.de
+ SpicDS:
- fix: AK4381 produce hiss sound on 192kHz sample rate
- fix: stupid bug with volume control for AK4396
Submitted by: Konstantin Dimitrov <kosio.dimitrov@gmail.com>
kernel one as the non-faulting flush address in the loader so
we can can change KERNBASE and VM_MIN_KERNEL_ADDRESS if we
ever want to without needing to worry about using a compatible
loader.
- Correctly check for LOADER_DEBUG.
- Add a missing const for page_sizes[].
This file was missed in r188455.
o Fix a minor indentation problem.
o Put in the extra-strict KOBJMETHOD define, but commented out since
the tree isn't yet ready.
Reviewed by: (1) was posted to arch@ without objection (and 1 go for it)
Attach call without devclass set crashes the system.
On resume AHCI driver sometimes tries to create duplicate adX device.
It is surely his own problem, but IMHO it is not a reason to crash here.
Other reasons are also possible.
kernel one as the non-faulting flush address in the loader so
we can can change KERNBASE and VM_MIN_KERNEL_ADDRESS if we
ever want to without needing to worry about using a compatible
loader.
- Correctly check for LOADER_DEBUG.
- Add a missing const for page_sizes[].
result in errors for a format loading but subsequent correct recognizing
for another format.
File format loading functions should avoid printing any additional
informations but just returning appropriate (and different between each
other) error condition, characterizing different informations.
Additively, the linker should handle appropriately different format
loading errors.
While a general mechanism is desired, fix a simple and common case on
amd64: file type is not recognized for link elf and confuses the linker.
Printout an error if all the registered linker classes can't recognize
and load the module.
Reviewed by: jhb
Sponsored by: Sandvine Incorporated
MFp4 //depot/projects/usb; 157412
Sync from svn.freebsd.org/base/user/thompsa/usb which is a minimal changeset
from oldUSB (no config_td).
This excludes the taskqueue changes (for the moment) as requested.
Sync from svn.freebsd.org/base/user/thompsa/usb which is a minimal changeset
from oldUSB (no config_td).
This excludes the taskqueue changes (for the moment) as requested.
- Change "usb2_pause_mtx" so that it takes the timeout value in ticks
- Make sure that attach waits for the generic probe to leave room for firware
loader drivers and device specific USB Audio drivers like USB phone adapters
Submitted by: Hans Petter Selasky
- USB serial drivers cleanup, factor out code
- Simplify line state programming
- Integrate uslcom from old USB stack
Submitted by: Hans Petter Selasky
1. Move most of the ifnet logic into the usb2_ethernet module, this includes,
- make all usb ethernet interfaces named ue%d
- handle all threading in usb2_ethernet
- provide default ioctl handler
- handle mbuf rx
- provide locked callbacks for init,start,stop,etc
2. Cleanup CDC-Ethernet driver.
Submitted by: Hans Petter Selasky
Obtained from: svn.freebsd.org/base/user/thompsa/usb [1]
- Change "usb2_pause_mtx" so that it takes the timeout value in ticks
- Factor out USB ethernet and USB serial driver specific control request.
- USB process naming cleanup.
Submitted by: Hans Petter Selasky
- Change "usb2_pause_mtx" so that it takes the timeout value in ticks
- USB controller: EHCI High Speed Interrupt endpoint fix.
- Fix OHCI and EHCI counting bug when multiple TD's are involved in
a short USB transfer and a short packet happens on the non-last TD in the
USB transfer frame.
- USB process naming cleanup.
Submitted by: Hans Petter Selasky
lookups:
- Honor the caller's locking flags in udf_root() and udf_vget().
- Set VV_ROOT for the root vnode in udf_vget() instead of only doing it in
udf_root().
- Honor the requested locking flags during pathname lookups in udf_lookup().
- Release the buffer holding the directory data before looking up the vnode
for a given file to avoid a LOR between the "udf" vnode locks and
"bufwait".
- Use vn_vget_ino() to handle ".." lookups.
- Special case "." lookups instead of calling udf_vget(). We have to do
extra checking for the vnode lock for "." lookups.
the same dma tag. However, it can happen multiple dma tags share the same
bounce zone too, so add a per-bounce zone map counter, and check it instead of
the dma tag map counter, to know if we have to alloc more pages.
Reported by: miwi
Reviewed by: scottl
controllers that lose Tx completion interrupts under certain
conditions. With this change it's safe to use MSI on PCIe
controllers so enable MSI on these controllers.
found inside extended partitions and used to create logical partitions.
At this time write/modify support is not (yet) present.
The EBR and MBR schemes both check the parent scheme. The MBR will
back-off when nested under another MBR, whereas the EBR only nests
under a MBR.
offset. This is needed for the ehci hardware buffer rings that assume
this behavior.
This is an interim solution, and a more general one is being worked
on. This solution doesn't break anything that doesn't ask for it
directly. The mbuf and uio variants with this flag likely don't work
and haven't been tested.
Universe builds with these changes. I don't have a huge-memory
machine to test these changes with, but will be happy to work with
folks that do and hps if this changes turns out not to be sufficient.
Submitted by: alfred@ from Hans Peter Selasky's original
hold the map lock there, and might need the vnode lock for OBJT_VNODE
objects. Postpone object deallocation until caller of vm_map_delete()
drops the map lock. Link the map entries to be freed into the freelist,
that is released by the new helper function vm_map_entry_free_freelist().
Reviewed by: tegge, alc
Tested by: pho
Reference object, drop the map lock, and then call vm_object_sync().
The object sync might require vnode lock for OBJT_VNODE type objects.
Reviewed by: tegge
Tested by: pho
acquire vnode lock for OBJT_VNODE object after map lock is dropped.
Because we have the busy page(s) in the object, sleeping there would
result in deadlock with vnode resize. Try to get lock without sleeping,
and, if the attempt failed, drop the state, lock the vnode, and restart
the fault handler from the start with already locked vnode.
Because the vnode_pager_lock() function is inlined in vm_fault(),
axe it.
Based on suggestion by: alc
Reviewed by: tegge, alc
Tested by: pho
underlying partitioning scheme.
o Put the start and end of the partition in the XML configuration.
The start and end are the LBAs of the first and last sector
(resp.) of the partition. They are currently identical to the
offset and size attributes, which describe the partition as an
offset and size in bytes, but may not in the future. The start
and end will be used for the logical partition boundaries and
may include metadata. The offset and size will always represent
the useful storage space within the partition. Typically these
two notions are the same, but for logical partitions in an
extended partition, the EBR is more naturally treated as being
part of the partition.
describing why several calls to vm_deallocate_object() with locked map
do not result in the acquisition of the vnode lock after map lock.
Suggested and reviewed by: tegge
be accessible outside vmspace_fork() yet, but locking it would satisfy
the protocol of the vm_map_entry_link() and other functions called
from vmspace_fork().
Use trylock that is supposedly cannot fail, to silence WITNESS warning
of the nested acquisition of the sx lock with the same name.
Suggested and reviewed by: tegge
both node pointer and name component. This does the right thing for
hardlinks to the same node in the same directory.
Submitted by: Yoshihiro Ota <ota j email ne jp>
PR: kern/131356
MFC after: 2 weeks
(duplicate) code in sys/netipsec/ipsec.c and fold it into
common, INET/6 independent functions.
The file local functions ipsec4_setspidx_inpcb() and
ipsec6_setspidx_inpcb() were 1:1 identical after the change
in r186528. Rename to ipsec_setspidx_inpcb() and remove the
duplicate.
Public functions ipsec[46]_get_policy() were 1:1 identical.
Remove one copy and merge in the factored out code from
ipsec_get_policy() into the other. The public function left
is now called ipsec_get_policy() and callers were adapted.
Public functions ipsec[46]_set_policy() were 1:1 identical.
Rename file local ipsec_set_policy() function to
ipsec_set_policy_internal().
Remove one copy of the public functions, rename the other
to ipsec_set_policy() and adapt callers.
Public functions ipsec[46]_hdrsiz() were logically identical
(ignoring one questionable assert in the v6 version).
Rename the file local ipsec_hdrsiz() to ipsec_hdrsiz_internal(),
the public function to ipsec_hdrsiz(), remove the duplicate
copy and adapt the callers.
The v6 version had been unused anyway. Cleanup comments.
Public functions ipsec[46]_in_reject() were logically identical
apart from statistics. Move the common code into a file local
ipsec46_in_reject() leaving vimage+statistics in small AF specific
wrapper functions. Note: unfortunately we already have a public
ipsec_in_reject().
Reviewed by: sam
Discussed with: rwatson (renaming to *_internal)
MFC after: 26 days
X-MFC: keep wrapper functions for public symbols?
