Commit Graph

99941 Commits

Author SHA1 Message Date
alc
163a9eabd1 Modify contigmalloc1() so that the free page queues lock is not held when
vm_page_free() is called.  The problem with holding this lock is that it is
a spin lock and vm_page_free() may attempt the acquisition of a different
default-type lock.
2004-03-02 08:25:58 +00:00
grehan
1ae35df349 Increase kernel VA from 256Mb to 512Mb by shifting the segment used
for user copyinout down to 12, and keeping segments 13/14 for
kernel VA.

It would be nice to have more available, but segments lower than
this are reserved for either memory or 1:1 mapped device i/o,
and seg 15 is OpenFirmware ROM. Also, the effort to keep OpenFirmware
available for callbacks limits the use of VA-mapped segments.
Fortunately UMA_MD_SMALL_ALLOC takes away a lot of VM pressure.

Obtained from:  NetBSD
2004-03-02 06:49:21 +00:00
grehan
bfc8874821 Hook libthr to the build for PowerPC 2004-03-02 06:26:37 +00:00
grehan
a0da296615 libthr powerpc support.
Submitted by:  Suleiman Souhlal <refugee@segfaulted.com>
Tested with: most libpthread tests, Apache 'worker' MDM
2004-03-02 06:25:20 +00:00
grehan
da9e056b3c makecontext lib call.
Submitted by: Suleiman Souhlal <refugee@segfaulted.com>
2004-03-02 06:22:24 +00:00
grehan
256bcf5eae Kernel changes for libthr (and probably libpthread).
include/ucontext.h
 - remove trapframe and switch over to 'generic' description of machine
   state. Include version field to help with future modifications.
   Include floating point and altivec state, and hopefully align
   correctly

powerpc/copyinout.c
 - fill out casuptr() sync primitive, required by kern_umtx.c

powerpc/machdep.c
 - shifted proc0/thread0/pcpu setup to before cninit, since
   syscons -> make_dev -> devlock requires a valid curthread
 - implemented get_mcontext/set_mcontext
 - recast sendsig/sigreturn to use get/set_mcontext and new
   ucontext struct. floating point now saved
 - TODO: save/restore altivec state

powerpc/vm_machdep.c
 - implemented cpu_thread_setup/cpu_set_upcall/cpu_set_upcall_kse
 - eliminated trailing whitespace

Submitted by:  Suleiman Souhlal <refugee@segfaulted.com>, ucontext by grehan
2004-03-02 06:13:09 +00:00
julian
3119ae0df5 When we get a packet error, move on, don't go into an infinite loop
looking at it.

fixes at least one cause of "hanging" due to this driver.
2004-03-02 05:43:42 +00:00
dd
ae9f26fffc Add CTLTYPE_QUAD to the list of types for which we don't want an empty
value.  All the other numeric types are doing it . . .
2004-03-02 05:42:52 +00:00
julian
54fa486da2 Whitespace changes to match rest of file.. 2004-03-02 01:46:34 +00:00
jhb
86e3aa5b6c Check for TDF_SINTR before calling sleepq_abort() as there is a narrow
race in between sleepq_add() and sleepq_catch_signals() in that setting
td_wchan and TDF_SINTR is not atomic to sched_lock but only to the sleepq
lock.  This band-aid will stop assertion failures, but there is perhaps a
larger problem with the sleepq_add/sleepq_catch_signals race that I am not
sure how to solve.  For the signals case the race is harmless because we
always call cursig() after setting TDF_SINTR.  However, KSE doesn't do
anything in sleepq_catch_signals() to check that this race was lost, so I
am unsure if this race is harmful for this specific abort.
2004-03-01 23:07:58 +00:00
simon
1dc1bc8010 - Fix typo.
- Use .Fx when I'm here anyway.

PR:		docs/63622
Submitted by:	Andrew Boothman <andrew@mux.org.uk>
2004-03-01 22:58:07 +00:00
rwatson
8da3c338df Rename NET_PICKUP_GIANT() to NET_LOCK_GIANT(), and NET_DROP_GIANT()
to NET_UNLOCK_GIANT().  While they are used in similar ways, the
semantics are quite different -- NET_LOCK_GIANT() and NET_UNLOCK_GIANT()
directly wrap mutex lock and unlock operations, whereas drop/pickup
special case the handling of Giant recursion.  Add a comment saying
as much.

Add NET_ASSERT_GIANT(), which conditionally asserts Giant based
on the value of debug_mpsafenet.
2004-03-01 22:37:01 +00:00
phk
2413c6f29f Move the "fast" but unused eventhandlers to pasture. They're in the
CVS repo should we ever need them.

Objected to by:
2004-03-01 22:36:58 +00:00
kensmith
370584b788 Add command line option for chrootdir, all pkg_add(8) operations will be
done inside of chroot(2) to chrootdir.  Added to help with sysinstall(8)
support of install to alternate root but possibly useful for setting up
jails, etc.

No objection from:	portmgr@
Style(9) abuse due to:	entire program violates style(9)
Approved by:		rwatson (mentor)
2004-03-01 21:58:21 +00:00
kensmith
d48c225260 This is an initial whitespace cleanup commit, new content to follow.
Adding hard line breaks at the end of sentences.

Approved by:	rwatson (mentor)
2004-03-01 21:50:49 +00:00
scottl
08eaf5dabb Change another pointer name that was missed in the previous commit.
Spotted by:	njl
2004-03-01 21:45:49 +00:00
scottl
d3341e79a8 Check and free the actual pointer the was used in a malloc instead of
checking and freeing a different pointer that may or may not have been
assigned the same value.  This should fix panics under load that were
recently reported.
2004-03-01 21:27:14 +00:00
simon
b3c23c70ff Note that the D-Link 530-TXS also works with the ste(4) driver.
PR:		docs/63600
Submitted by:	Christopher Nehren <apeiron@comcast.net>
2004-03-01 20:52:54 +00:00
cperciva
e48332f471 Fixes to output of ls -lh for certain file sizes:
1. Sizes in the range 1000 -- 1023 units require four characters width
   for the integer; increase the field width to accomodate this.
2. Sizes in the range 9.95 -- 10 units were being displayed as "10.0"
   units; adjust the logic to fix this, and now that we've got an extra
   character of field width, print fractional units if the size is less
   than 99.95 units.
3. Don't display sub-byte precision.

This should mean that the following sizes are displayed:
    0B .. 1023B
  1.0U ..  9.9U
 10.0U .. 99.9U
  100U .. 1023U
for values of U in "KMGTPE".

PR:		bin/63547
Pointy hat to:	cperciva
Approved by:	rwatson (mentor)
2004-03-01 19:25:27 +00:00
kensmith
28883a514b The previous commit fixed -current on alpha for machines with
serial console connections but not graphical consoles.  This fixes the
graphical console machines.  It leaves the initial promcons console
driver in place until a bit later in the boot sequence, delaying the
switch to the device drivers more appropriate for the machine's real
console setup.  Note we still need the delayed make_dev() for promcons,
it does not have a proper bus interface so unlike other console drivers
it will not be found later during normal device discovery.

Tested by:			sepotvin <at> videotron <dot> ca
Root cause explained by:	grehan (-current)
Approved by:			rwatson (mentor)
2004-03-01 19:19:15 +00:00
ume
178eaf92b9 fix -O0 compilation without INET6.
Pointed out by:	ru
2004-03-01 19:10:31 +00:00
des
9bdabdf198 While I'm here, add linprocfs (but not pseudofs, since it is no use on
its own)
2004-03-01 18:42:16 +00:00
des
df5a85e9ba Add acpi_video_load (default NO) in the ACPI section 2004-03-01 18:13:00 +00:00
ache
7aeda997f8 Improve GNU compatibility in several places, use internal GNU_COMPATIBLE
define for it.
Don't catch POSIXLY_CORRECT env. into static variable, it can be changed
on the fly by program.
Use P1003.2 standartized illoptchar[]
2004-03-01 17:57:05 +00:00
ru
98df36967c Removed extraneous parentheses. 2004-03-01 17:47:38 +00:00
pjd
dcb69fe7b1 Removed unused fields. 2004-03-01 17:33:11 +00:00
pjd
182ad8928d We don't need d_length field. 2004-03-01 17:32:48 +00:00
ru
2cfb8dc3b2 Restore the sorting broken in rev. 1.256. 2004-03-01 17:26:39 +00:00
ru
5395e1e157 Netgraph node type for IEEE 802.1Q VLAN tagging. 2004-03-01 17:22:16 +00:00
obrien
c056dc56ec Update for reality. 2004-03-01 16:34:39 +00:00
ume
82ed053e22 - reject incoming packets to an interface-local multicast address from
the wire.
- added a generic scope check, and removed checks for loopback src/dst
  addresses.

Obtained from:	KAME
2004-03-01 15:34:29 +00:00
sos
16b335106f Remember to mtx_destroy mutexes. 2004-03-01 13:17:07 +00:00
ache
46a9b8739b Comment out things related to getopt() replacement we not use 2004-03-01 10:59:23 +00:00
ache
67499340a7 Change "-"-started options when POSIX_CORRECTLY is set handling
in favour of GNU instead of NetBSD, because configure's use us and
expect GNU.
2004-03-01 10:12:45 +00:00
ache
ce580280f4 Change "-"-started options when POSIX_CORRECTLY is set handling
in favour of GNU instead of NetBSD, because configure's use us and
expect GNU.
2004-03-01 10:03:34 +00:00
ache
15469f77d2 Merge conflicts, upgrade 2004-03-01 08:37:20 +00:00
ache
3bd1cc91fa This commit was generated by cvs2svn to compensate for changes in r126432,
which included commits to RCS files with non-trunk default branches.
2004-03-01 08:24:49 +00:00
ache
a28ccb3d69 Trimmed grep 2.4.2 2004-03-01 08:24:49 +00:00
njl
0b1110f652 Hook acpi_video up to the build. 2004-03-01 08:15:26 +00:00
njl
f373398488 Add the ACPI standard video extensions driver. I've done some style cleanup
but a bit more reamins to be done.  For now, it is usable.

Submitted by:	Taku YAMAMOTO <taku@cent.saitama-u.ac.jp>
2004-03-01 08:12:56 +00:00
njl
c1c7eeec3c Add the ACPI standard video extensions driver. I've done some style cleanup
but a bit more reamins to be done.  For now, it is usable.

PR:
Submitted by:	Taku YAMAMOTO <taku@cent.saitama-u.ac.jp>
Reviewed by:
Approved by:
Obtained from:
MFC after:
2004-03-01 08:12:55 +00:00
bde
280876b890 Fixed some insertion sort errors for usb devcies (mainly for serial ones). 2004-03-01 07:51:51 +00:00
scottl
c687163156 Add a manual page for the umct(4) driver. 2004-03-01 03:49:05 +00:00
rwatson
b0b5f961bd Rename dup_sockaddr() to sodupsockaddr() for consistency with other
functions in kern_socket.c.

Rename the "canwait" field to "mflags" and pass M_WAITOK and M_NOWAIT
in from the caller context rather than "1" or "0".

Correct mflags pass into mac_init_socket() from previous commit to not
include M_ZERO.

Submitted by:	sam
2004-03-01 03:14:23 +00:00
kan
9fe9a30730 Pich up a do {} while(0) cleanup by phk that was discarded accidentally in
previous revision.

Submitted by:	alc
2004-03-01 02:44:33 +00:00
ticso
fe22b3cc39 add driver for BWCT console management serials 2004-03-01 02:34:49 +00:00
scottl
48b0575f79 Convert the other use of flags to mflags in soalloc(). 2004-03-01 01:14:28 +00:00
kientzle
48517ca7da Back out the "clean_environment()" function from libutil.
Further contemplation has convinced me that this was
not going to really solve the problem of environment-poisoning
without raising serious administrative headaches.  There
must be a better way...
2004-02-29 22:13:28 +00:00
mikeh
9d29f488ff Add the -e (mail presence test), -H (header summary mode), and -F
(message save as first recipient) options for standards
conformance.

Submitted by:	Wartan Hachaturow <wart@tepkom.ru> (with some changes)
PR:		standards/61934
2004-02-29 20:44:44 +00:00
maxim
1631601f6d o Typo: Ternal -> Thermal. 2004-02-29 18:30:35 +00:00