- to increase performance do not reallocate mbuf when possible,
- to support up to 16K packets (was 2K max) use mbuf cluster of proper size.
This change depends on recent ng_nat and ip_fw_nat changes.
As discussed with Robert Watson and John Baldwin, it would be better if
PTY's are created with proper permissions, turning grantpt() into a
no-op.
Bypassing security frameworks like MAC by passing NOCRED to
VOP_SETATTR() will only make things more complex.
Approved by: philip (mentor)
pretend to be IntelliMouse (which have a few more features than generic mice)
causing the IntelliMouse probe to work and the Synaptics code never to be
called.
This should not break "real" IntelliMouse because the Synaptics detection code
is fairly specific.
PR: kern/120833
Submitted by: Eygene Ryabinkin <rea-fbsd -at- codelabs.ru>
MFC after: 1 week
This fixes packet fragmentation handeling.
Pass really available buffer size to libalias instead of MCLBYTES constant.
MCLBYTES constant were used with believe that m_megapullup() always moves
date into a fresh cluster that sometimes may become not so.
promotion within the kernel's address space. Specifically,
pmap_promote_pde() is only called when the page table page (PTP) that
is referenced by the given PDE has a full "use count", i.e., its
wire_count is 512. Although this guarantees for a user address space
that all 512 PTEs in the PTP hold valid mappings, the same is not true
of the kernel's address space. A kernel PTP always has a use count of
512 regardless of the state of the PTEs. Therefore,
pmap_promote_pde() should not assume (or assert) that the first PTE in
the PTP is valid.
(Don't ask for a vendor import of this yet, we're in the early days of svn)
Instead of using cyclic timers to call the state clean and deadman callbacks,
use a callout on FreeBSD to avoid the deadlock on FreeBSD due to trying to
send interprocessor interrupts with interrupts disabled.
Reported by: ps, jhb, peter, thompsa
In the mpsafetty branch, PTY's are allocated through the posix_openpt()
system call. The controller side of a PTY now uses its own file
descriptor type (just like sockets, vnodes, pipes, etc).
To remain compatible with existing FreeBSD and Linux C libraries, we can
still create PTY's by opening /dev/ptmx or /dev/ptyXX. These nodes
implement d_fdopen(). Devfs has been slightly changed here, to allow
finit() to be called from d_fdopen().
The routine grantpt() has also been moved into the kernel. This routine
is a little odd, because it needs to bypass standard UNIX permissions.
It needs to change the owner/group/mode of the slave device node, which
may often not be possible. The old implementation solved this by
spawning a setuid utility.
When VOP_SETATTR() is called with NOCRED, devfs_setattr() dereferences
ap->a_cred, causing a kernel panic. Change the de_{uid,gid,mode} code to
allow changes when a->a_cred is set to NOCRED.
Approved by: philip (mentor)
whatever frequency it started at instead of always picking the highest
frequency. The first version of this driver attempted to do this, but it
set the speed to the first frequency in the list rather than the value it
had saved.
MFC after: 1 week
Discussed with: rpaulo, phk
clients that have rebooted (or otherwise changed port numbers). If the
client is broken or has no active locks, it won't notify us. Fall back
on the two minute timeout logic used by the userland rpc.lockd code.
MFC after: 1 week
variations from normal 16x50 behaviour however is the the use of a normally
unused bit of IER to control RX timeout interrupts independently of the
generally used RXRDY bit. If this bit is not enabled, we only ever get
interrupts when the FIFO is full, never before. This is not very useful when
the UART is being used as a console.
In order to support this without causing potential problems on more "normal"
16x50 variants, this change introduces two hints for the uart device, ier_mask
and ier_rxbits. These can be used to override which bits get set and cleared
when we're enabling and disabling RX interrupts.
Reviewed by: marcel
some cases, add explicit inpcb locking rather than relying on the global
lock, as we dereference inp_socket, but also allowing us to drop the
global lock more quickly.
MFC after: 1 week
Even though we got rid of device major numbers some time ago, device
drivers still need to provide unique device minor numbers to make_dev().
These numbers are only used inside the kernel. They are not related to
device major and minor numbers which are visible in devfs. These are
actually based on the inode number of the device.
It would eventually be nice to remove minor numbers entirely, but we
don't want to be too agressive here.
Because the 8-15 bits of the device number field (si_drv0) are still
reserved for the major number, there is no 1:1 mapping of the device
minor and unit numbers. Because this is now unused, remove the
restrictions on these numbers.
The MAXMAJOR definition was actually used for two purposes. It was used
to convert both the userspace and kernelspace device numbers to their
major/minor pair, which is why it is now named UMINORMASK.
minor2unit() and unit2minor() have now become useless. Both minor() and
dev2unit() now serve the same purpose. We should eventually remove some
of them, at least turning them into macro's. If devfs would become
completely minor number unaware, we could consider using si_drv0 directly,
just like si_drv1 and si_drv2.
Approved by: philip (mentor)
monitoring UDP connections using sysctls. In some cases, add
previously missing locking of inpcbs, as inp_socket is followed,
which also allows us to drop global locks more quickly.
MFC after: 1 week
clocked at 10x normal speed. That is, when you set it for 9600
baud, it actually does 96000 baud. In order to make it plug and
play with other serial ports, it has to have its clock rate
reduced by a factor of 10.
Discussed with: Marcel Moolenaar
MFC after: 2 weeks
o do not put the chip into full sleep in ath_stop as it gains
nothing and causes many parts to hang in ath_detach because we
may touch the chip during vap teardown; this may also fix issues
with unloading the module
o add a note in ath_detach to explain ath_hal_detach puts the
chip in low power mode; this is useful to know as it means
unloading the module will place a pci device in the lowest
possible power state
o leave an #ifdef notyet marker for powering down the chip when
a device is marked down; we can't do that until we handle all
the ways the driver may be entered and touch the chip
o fix resume by reloading the h/w key cache as it's been clobbered
(for pci) by the socket being powered off; for station mode we
directly stop+init the chip and then simulate a beacon miss to
get the upper layers sync'd up; for other configs we must brute
force stop+start the vaps so they go through the state machine
address specified in the ioctl and for drivers that need the address
to locate a key (e.g. for delete).
Note this changes net80211-private api's but not the driver callback;
may want to change that in the future.
Reviewed by: sephe, thompsa
on amd64. Note the only difference is the iovec32 part so I use the
native structure for everything else.
Also I plan to MFC all the changes in -current to 7-stable and 6-stable
shortly since I've been running them. This does not include the cam
changes.
MFC after: 3 days
o construct a name for the com lock as done for other locks
o pass the device name to IEEE80211_LOCK_INIT so the mtx name
is constructed as foo_com_lock
o introduce *_LOCK_OBJ macro's to hide the lock contents and
minimize redundant code
Right now we perform some of the checks inside the fcntl()'s F_DUPFD
operation twice. We first validate the `fd' argument. When finished,
we validate the `arg' argument. These checks are also performed inside
do_dup().
The reason we need to do this, is because fcntl() should return different
errno's when the `arg' argument is out of bounds (EINVAL instead of
EBADF). To prevent the redundant locking of the PROC_LOCK and
FILEDESC_SLOCK, patch do_dup() to support the error semantics required
by fcntl().
Approved by: philip (mentor)
inlining resulted in constant propagation to the extend that cmpval
was known to the compiler to be URWLOCK_WRITE_OWNER (= 0x80000000U).
Unfortunately, instead of zero-extending the unsigned constant, it
was sign-extended. As such, the cmpxchg instruction was comparing
0x0000000080000000LU to 0xffffffff80000000LU and obviously didn't
perform the exchange.
But, since the value returned by cmpxhg equalled cmpval (when zero-
extended), the _thr_rtld_lock_release() function thought the exchange
did happen and as such returned as if having released the lock. This
was not the case. Subsequent locking requests found rw_state non-zero
and the thread in question entered the kernel and block indefinitely.
The work-around is to zero-extend by casting to uint64_t.
