159323 Commits

Author SHA1 Message Date
rnoland
ae3bae8fe3 Fix blit pitch for 4 byte transfers on r600.
MFC after:	1 week
2009-09-28 22:38:44 +00:00
rnoland
c27ab7e948 R600 doesn't support IRQs yet, so don't try to use them.
MFC after:	1 week
2009-09-28 22:37:07 +00:00
yongari
beb5c5d2db For AR8132 fast ethernet controller, do not report 1000baseT
capability to mii(4). Even though AR8132 uses the same model/
revision number of F1 gigabit PHY, the PHY has no ability to
establish 1000baseT link. I have no idea why Atheros use the same
device/model id for this PHY.
With this change atphy(4) does not report 1000baseT media
capability and manual 1000baseT configuration is also disabled
which is more desirable behavior for 10/100Mbps PHY.
2009-09-28 22:18:38 +00:00
edwin
5e8dbd8819 MFV of tzdata2009n
Pakistan will go out DST on 1 October.
Headsup for changes in Argentina.
2009-09-28 21:53:28 +00:00
yongari
17f25f17df DGE-560SX is now supported. 2009-09-28 21:15:57 +00:00
yongari
b1cb9fd95c Add DGE-560SX(Yukon XL) to the supported device list. Many thanks
to "Eugene Perevyazko <john <> dnepro dot net>" who kindly gave
remote access to system with DGE-560SX.
2009-09-28 21:11:31 +00:00
yongari
d4cb40b4cb Add workaround for Yukon XL which has hardware bug that can't flush
FIFO.
2009-09-28 21:07:19 +00:00
yongari
7139323b97 Add hack to pass controller specific information to phy driver.
Unlike most other PHYs there is no easy way to know which media
type the PHY supports on Marvell PHYs. MIIF_HAVEFIBER flags is now
passed via bus-specific instance variable of a device. While I'm
here add 88E1112 specific work around to set SIGDET polarity low.
Many thanks "Eugene Perevyazko <john <> dnepro dot net>" who kindly
gave remote access to system with DGE-560SX.
2009-09-28 21:03:28 +00:00
yongari
ac4cfae59c Fix MIB statistics clear routine. This should fix alignment errors on sparc64.
Reported by:	Garrett Damore < gdamore <> opensolaris dot org >
2009-09-28 20:03:37 +00:00
yongari
9c528dca41 Some fiber PHY(88E1112) does not seem to set resolved speed so
always assume we've got IFM_1000_SX.
2009-09-28 19:53:53 +00:00
yongari
898fa4c915 Don't encode model id twice.
Reported by:	Kristof Provost <kristof <> sigsegv dot be>
2009-09-28 19:48:17 +00:00
yongari
af9841a11e It seems some 82559ER controllers do not support Rx checksum
offloading. Datasheet said nothing about the limitation of 82559ER
except WOL. Explicitly disable Rx checksum offloading for
controllers that is known to lack the capability.

PR:	kern/138135
Tested by:	Gooderum, Mark < mgooderum <> websense dot com >
2009-09-28 19:40:16 +00:00
yongari
4d695cf281 Remove unnecessary device reinitialization. 2009-09-28 19:33:52 +00:00
jamie
43639eae2b Set the prison in NFS anon and GSS SVC creds (as I indended to in r197581).
Reviewed by:	marcel
2009-09-28 18:55:29 +00:00
jamie
027431f29f Back out r197581, which replaced this file witk sys/kern/vfs_export.c.
Who knew that "svn export" was an actual command, or that I would have
vfs_export.c stuck in my mind deep enough to type "export" instead of
"commit"?

Pointy Hat to:  jamie
2009-09-28 18:54:26 +00:00
jamie
59de460f51 Set the prison in NFS anon and GSS SVC creds.
Reviewed by:	marcel
MFC after:	3 days
2009-09-28 18:07:16 +00:00
alc
102b592620 Temporarily disable the use of 1GB page mappings by the direct map. There
are currently two problems with the use of 1GB page mappings by the direct
map.  First, at least one device driver uses pmap_extract() rather than
DMAP_TO_PHYS() to translate a direct map address to a physical address.
Unfortunately, neither pmap_extract() nor pmap_kextract() yet support 1GB
page mappings.  Second, pmap_bootstrap() needs to interrogate the MTRRs to
ensure that a 1GB page mapping doesn't span two MTRRs of different types.

Reported and tested by: Daniel O'Connor
MFC after:	3 days
2009-09-28 17:10:27 +00:00
delphij
79f2f8c774 Add two new fcntls to enable/disable read-ahead:
- F_READAHEAD: specify the amount for sequential access.  The amount is
   specified in bytes and is rounded up to nearest block size.
 - F_RDAHEAD: Darwin compatible version that use 128KB as the sequential
   access size.

A third argument of zero disables the read-ahead behavior.

Please note that the read-ahead amount is also constrainted by sysctl
variable, vfs.read_max, which may need to be raised in order to better
utilize this feature.

Thanks Igor Sysoev for proposing the feature and submitting the original
version, and kib@ for his valuable comments.

Submitted by:	Igor Sysoev <is rambler-co ru>
Reviewed by:	kib@
MFC after:	1 month
2009-09-28 16:59:47 +00:00
delphij
fd5f08e3e8 Use correct sizeof() object for klist 'list'. Currently, struct klist
contained only SLIST_HEAD as its member, thus sizeof(struct klist) would
equal to sizeof(struct klist *), so this change makes the code more
correct in terms of semantics, but should be a no-op to compiler at this
time.

Reported by:	MQ <antinvidia at gmail com>
2009-09-28 10:22:46 +00:00
ru
ae17fd849b Fixed a markup bug. 2009-09-28 09:49:48 +00:00
thompsa
ab04ac3fe9 Add back endpoint swap detection that was disabled in an earlier driver
conversion.

Submitted by:	Hans Petter Selasky
2009-09-28 08:18:14 +00:00
thompsa
f54adffeaf Add new FTDI IDs.
Submitted by:	Maks Verver, Arrigo Marchiori
2009-09-28 08:15:26 +00:00
delphij
987c4a758d Use a 2 clause BSD-style license instead of stating the code as public
domain, as requested by core@ and reviewed by the author.
2009-09-28 08:14:15 +00:00
thompsa
13d838412e Add experimental support for usb serial console and polled mode during DDB.
Submitted by:	Hans Petter Selasky
2009-09-28 08:13:50 +00:00
thompsa
d391f7f701 Add a config number quirk for the ELSA_MODEM1
Submitted by:	Stefan Bethke
2009-09-28 08:09:11 +00:00
thompsa
8a5af25984 add more device IDs
Reported by:	Mike Tancsa
Submitted by:	Hans Petter Selasky
2009-09-28 08:07:20 +00:00
thompsa
1115627740 Allow setting of MAC address for AXE based ethernet adapters.
Submitted by:	yongari
2009-09-28 08:05:14 +00:00
thompsa
7c784df5df Increase the rx buffer size to 16384 bytes, this increases RX performance from
50Mbps to 220Mbps on PLANEX GU-1000T.

Submitted by:	yongari
2009-09-28 08:03:52 +00:00
thompsa
225d046f41 - Remove SAMSUNG_YP_U2 now that it is in the cam layer
- Add quirk from Tobias Grosser for Western Mypassword

Submitted by:	Hans Petter Selasky
2009-09-28 08:00:17 +00:00
thompsa
f0ee409396 MFp4
Add new usbdev entries for Marvell, FTDI, Option and Western.
2009-09-28 07:57:23 +00:00
thompsa
fe6300971a Add basic support for USB Network Control Model (NCM) v1.0 to if_cdce.c.
http://www.usb.org/developers/devclass_docs/NCM10.zip

Submitted by:	Hans Petter Selasky
2009-09-28 07:53:55 +00:00
thompsa
f23c472dc2 Add extra safety locking when clobbering xfer->flags_int.started in start and
stop functions, because xfer->flags_int is also updated by the USB controller,
under the controller lock.

Submitted by:	Hans Petter Selasky
2009-09-28 07:46:22 +00:00
thompsa
0e8d1eea65 Correct buffer sizes used so that they match. The old code could give the
impression that a overflow situation existed but was not possible.

Reported by:	kib
Submitted by:	Hans Petter Selasky
2009-09-28 07:42:59 +00:00
delphij
e9b1045580 Static'ify internal methods and use prototype. 2009-09-28 07:42:52 +00:00
thompsa
20d69c073b Add support for USB language selection.
PR:		usb/138563
Reported by:	Bruce Cran
Submitted by:	Hans Petter Selasky
2009-09-28 07:41:17 +00:00
thompsa
430f344730 Fix NULL-pointer dereference in usb_endpoint_foreach().
PR:		usb/138389
Submitted by:	Patroklos Argyroudis at census, inc
2009-09-28 07:39:51 +00:00
thompsa
af97dcb823 Add support for ChipHead 341 serial port adapter.
Submitted by:	Hans Petter Selasky
2009-09-28 07:32:11 +00:00
thompsa
313dce25ce Clear all interrupts rather than just SETUP packet.
Submitted by:	Hans Petter Selasky
2009-09-28 07:10:32 +00:00
thompsa
9566db332f Simplify logic around setting EHCI_QH_DTC and expand some htohc32(temp.sc, 0)
statements to zero.

Submitted by:	Hans Petter Selasky
2009-09-28 07:09:17 +00:00
thompsa
1e9eba768b Import two PCI quirks from Linux
- Add quirk for ATI SB600 and SB700 to free SMB controller
 - Correct schedule sleep time to 10us on the VIA ehci controller

Reported by:	Dorian B<FC>ttner, Andriy Gapon
Submitted by:	Hans Petter Selasky
2009-09-28 07:06:47 +00:00
thompsa
d0aa741310 MFp4 @ 168387
- clean up USB detach logic. There seems to be some problems detaching multiple
  USB HUBs connected in series from the root.

- after this patch the rule is:
  1) Always use device_detach() on the USB HUB first.
  2) Never just device_delete_child() on the USB HUB, because that function
  will traverse to all the device leaves and free them first, and then the USB
  stack will free the devices twice which doesn't work very well.

- make sure the did DMA delay gets set after the timeout has elapsed to make
  logic more clear. There is no functional difference.

Submitted by:	Hans Petter Selasky
2009-09-28 07:01:54 +00:00
cperciva
d2f83e3acd Silence warning printed by getfsspec(3) when /etc/fstab does not exist
fstab: /etc/fstab:0: No such file or directory
and from dump(8) when setfsent(3) fails due to /etc/fstab not existing:
  DUMP: Can't open /etc/fstab for dump table information: No such...

This makes daily and security periodic runs somewhat cleaner in jails
which lack /etc/fstab files.

MFC after:	1 month
2009-09-28 03:32:35 +00:00
mav
cf5b119219 Fethch more information from IDENTIFY result. 2009-09-27 22:00:26 +00:00
gabor
7d74cbec33 - Add share/nls/gl_ES.ISO8859-1, which I forgot in my last commit
Submitted by:	Andrzej Tobola <ato@iem.pw.edu.pl> (via private mail)
2009-09-27 21:27:11 +00:00
bz
0262ee3c53 Add a simple C program to check mmap calls to various different addresses.
The most important test is the mapping fixed at address 0 depending on the
new sysctl.

Things will be updated and possibly converted to m4/.t style once the
details about the kernel patch will be shaken out.

Submitted by:	simon (initial version)
2009-09-27 21:03:33 +00:00
simon
ce60425faf - When we run our trap cleanup handler, echo that we are running this
handler to make it more clear why we are 'suddenly' running df,
  umount, and mdconfig.
- Remove trap handler again after we have unconfigured the memory
  device etc.  Before we could end up running the trap handler if a
  later stage failed, which was a bit confusing and not really useful.

MFC after:	2 weeks
2009-09-27 21:01:07 +00:00
mav
d397ebb9a8 Report SATA 3.x devices. 2009-09-27 20:50:54 +00:00
mav
3d913d7f04 Add more defines from recent and not only specs. 2009-09-27 20:48:10 +00:00
ed
9ed9beeb2c Add support for VT200-style mouse input.
Right now if applications want to use the mouse on the command line,
they use sysmouse(4) and install a signal handler in the kernel to
deliver signals when mouse events arrive. This conflicts with my plan to
change to TERM=xterm, so implement proper VT200-style mouse input.

Because mouse input is now streamed through the TTY, it means you can
now SSH to another system on the console and use the mouse there as
well. The disadvantage of the VT200 mouse protocol, is that it doesn't
seem to generate events when moving the cursor. Only when pressing and
releasing mouse buttons.

There are different protocols as well, but this one seems to be most
commonly supported.

Reported by:	Paul B. Mahol <onemda gmail com>
Tested with:	vim(1)
2009-09-27 18:19:41 +00:00
simon
a0b7c793b4 Do not allow mmap with the MAP_FIXED argument to map at address zero.
This is done to make it harder to exploit kernel NULL pointer security
vulnerabilities.  While this of course does not fix vulnerabilities,
it does mitigate their impact.

Note that this may break some applications, most likely emulators or
similar, which for one reason or another require mapping memory at
zero.

This restriction can be disabled with the security.bsd.mmap_zero
sysctl variable.

Discussed with:	rwatson, bz
Tested by:	bz (Wine), simon (VirtualBox)
Submitted by:	jhb
2009-09-27 14:49:51 +00:00