- add show as alias for get
- add weights to allow mpath to do more than equal cost
- add sticky / nostick to disable / re-enable per-connection load balancing
This adds a field to rt_metrics_lite so network bits of world will need to be re-built.
Reviewed by: jeli & qingli
calculation was too agressive. Instead we should only
look at each nibble. This makes it so we make
10.2.0.0 become 10.2/16 NOT 10.2/17.
Need to explore the non-cidr address issue. The two
may not be seperable..
MFC after: 1 week
if a entry is not route add -net xxx/bits then we should use
the addr (xxx) to establish the number of bits by looking at
the first non-zero bit. So if we enter
route add -net 10.1.1.0 10.1.3.5
this is the same as doing
route add -net 10.1.1.0/24
Since the 8th bit (zero counting) is set to 1 we set bits
to 32-8.
Users can of course still use the /x to change this behavior
or in cases where the network is in the trailing part
of the address, a "netmask" argument can be supplied to
override what is established from the interpretation of the
address itself. e.g:
route add -net 10.1.1.8 -netmask 0xff00ffff
should overide and place the proper CIDR mask in place.
PR: 131365
MFC after: 1 week
1. separating L2 tables (ARP, NDP) from the L3 routing tables
2. removing as much locking dependencies among these layers as
possible to allow for some parallelism in the search operations
3. simplify the logic in the routing code,
The most notable end result is the obsolescent of the route
cloning (RTF_CLONING) concept, which translated into code reduction
in both IPv4 ARP and IPv6 NDP related modules, and size reduction in
struct rtentry{}. The change in design obsoletes the semantics of
RTF_CLONING, RTF_WASCLONE and RTF_LLINFO routing flags. The userland
applications such as "arp" and "ndp" have been modified to reflect
those changes. The output from "netstat -r" shows only the routing
entries.
Quite a few developers have contributed to this project in the
past: Glebius Smirnoff, Luigi Rizzo, Alessandro Cerri, and
Andre Oppermann. And most recently:
- Kip Macy revised the locking code completely, thus completing
the last piece of the puzzle, Kip has also been conducting
active functional testing
- Sam Leffler has helped me improving/refactoring the code, and
provided valuable reviews
- Julian Elischer setup the perforce tree for me and has helped
me maintaining that branch before the svn conversion
'get'. Since rtmsg() always gets called and returns 0 on success and -1
on failure, it's possible to exit with a suitable exit code by calling
exit(ret != 0) instead, as is done at the end of newroute().
PR: bin/112303
Submitted by: bruce@cran.org.uk
MFC after: 1 week
command would add incorrect routing entries if network numbers weren't
fully "spelled" out according to their class. For example:
# route add 128.0/16 (works)
# route add 128/16 (doesn't work)
# route add 193.0.0/24 (works)
# route add 193/24 (doesn't work)
Also, rework the way a netmask is deduced from network number if
it [netmask] is not specified.
Submitted by: Nuno Antunes <nuno.antunes@gmail.com> (mostly)
MFC after: 1 week
- Add description for EEXIST.
- Change description for ENOBUFS. Routing socket can return
this error for many different reasons, including general
memory shortage, mbuf memory shortage and rtentry zone.
PR: kern/64090 [1]
root is allowed to create raw sockets, then they will be able to create
routing sockets, too. However prison-root is not able to manipulate
routing tables. So when route(8) attempts to write to a routing
socket and recieves EPERM from the kernel, exit rather than moving
on with execution.
Approved by: bmilekic (mentor)
prior sysctl due to the structure growing between calls try again.
Also try again for deleting routes if things fail. We've seen
route -f fail this way which does not actually flush all routes.
This fixes it. It will whine but it will do the work.
PR: 56732
Obtained from: IronPort
answer for the euid. As a result, fix it such that setuid scripts or
programs may call route(8) to do work on their behalf.
Reviewed by: ru
MFC after: 3 days
- /0 if matches ::/128
- /64 if matches 2000::/3 and lowermost 64 bit is all 0
- /128 if matches 2000::/3 and lowermost 64 bit is non-zero 0
Obtained from: KAME/NetBSD
It does not help modern compilers, and some may take some hit from it.
(I also found several functions that listed *every* of its 10 local vars with
"register" -- just how many free registers do people think machines have?)
socket so that routing daemons and other interested parties
know when an interface is attached/detached.
PR: kern/33747
Obtained from: NetBSD
MFC after: 2 weeks
Allow non-superuser to open, listen to, and send safe commands on the
routing socket. Superuser priviledge is required for all commands
but RTM_GET.
Lose `setuid root' bit of route(8).
Reviewed by: wollman, dd
to use 0xffffffff (INADDR_NONE) as a netmask value. The fix
is to use inet_addr(3) which doesn't suffer from this problem.
PR: bin/28873
Also, while here, fixed the bug when netmask value was ignored
(RTF_HOST flag was set) if the "destination gateway netmask"
syntax is used, e.g. ``route add 1.2.3.4 127.1 255.255.255.255''.
in revision 1.48. It is pretty valid and often feasible to use
a non-point-to-point interface as the gateway. One might, for
example, use this to route some hosts through an ARP on a local
interface, without having to assign an additional IP address:
Script started on Tue Jun 12 16:16:09 2001
# ifconfig rl0 inet
rl0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500
inet 192.168.4.115 netmask 0xffffff00 broadcast 192.168.4.255
# netstat -arn -finet | grep -w rl0
192.168.4 link#1 UC 3 0 rl0 =>
192.168.4.65 0:d0:b7:16:9c:c6 UHLW 1 0 rl0 1197
# route add -net 192.168.100 -iface rl0
add net 192.168.100: gateway rl0
# ping 192.168.100.1
PING 192.168.100.1 (192.168.100.1): 56 data bytes
64 bytes from 192.168.100.1: icmp_seq=0 ttl=255 time=0.551 ms
64 bytes from 192.168.100.1: icmp_seq=1 ttl=255 time=0.268 ms
^C
--- 192.168.100.1 ping statistics ---
2 packets transmitted, 2 packets received, 0% packet loss
round-trip min/avg/max/stddev = 0.268/0.410/0.551/0.142 ms
# netstat -arn -finet | grep -w rl0
192.168.4 link#1 UC 3 0 rl0 =>
192.168.4.65 0:d0:b7:16:9c:c6 UHLW 1 0 rl0 1165
192.168.100 link#1 UCSc 1 0 rl0 =>
192.168.100.1 0:d0:b7:16:9c:c6 UHLW 1 4 rl0 1192
Script done on Tue Jun 12 16:17:12 2001
This work was based on kame-20010528-freebsd43-snap.tgz and some
critical problem after the snap was out were fixed.
There are many many changes since last KAME merge.
TODO:
- The definitions of SADB_* in sys/net/pfkeyv2.h are still different
from RFC2407/IANA assignment because of binary compatibility
issue. It should be fixed under 5-CURRENT.
- ip6po_m member of struct ip6_pktopts is no longer used. But, it
is still there because of binary compatibility issue. It should
be removed under 5-CURRENT.
Reviewed by: itojun
Obtained from: KAME
MFC after: 3 weeks
a route to the gateway and caches it in the route structure.
It may happen (if the routing table is screwed) that the gateway
route is the same route as the one being modified, in which case
a kernel reports EDQUOT. Be more verbose about this:
# route add -net 10 192.168.4.65
add net 10: gateway 192.168.4.65
# netstat -rn -finet
Routing tables
Internet:
Destination Gateway Flags Refs Use Netif Expire
default 192.168.4.65 UGSc 1 7 rl0
10 192.168.4.65 UGSc 0 0 rl0
127.0.0.1 127.0.0.1 UH 0 178 lo0
192.168.4 link#1 UC 2 0 rl0 =>
192.168.4.65 0:d0:b7:16:9c:c6 UHLW 2 0 rl0 1123
Before:
# route change -net 10 10.0.0.1
route: writing to routing socket: Disc quota exceeded
change net 10: gateway 10.0.0.1: Disc quota exceeded
After:
# ./route change -net 10 10.0.0.1
route: writing to routing socket: Disc quota exceeded
change net 10: gateway 10.0.0.1: gateway uses the same route
PR: bin/1093, misc/26833
PR: bin/12489
- Use inet_ntoa(3) where it should have been used. This
part of code simply wasn't converted to the "new" style
after the routename() function was converted from the
protocol-generic version to protocol-specific version
in CSRG revision 5.6.
MFC after: 1 week
argument only. Before that, the `route add default gateway' first tried
the `gateway' as network address and passed its name to getnetbyname(3),
which in the BIND resolution case does the T_PTR lookup on that name.
