process. UFS must check a whiteout name when it uses the
whiteout, but the current implementation does not check
the whileout name, so sometimes UFS writes over a wrong
whtieout. UFS *MUST* check the whiteout name to use a
corrent whiteout. This bug leads unionfs. panic.
This commit fixes this trouble.
Submitted by: Masanori Ozawa <ozawa@ongs.co.jp> (unionfs developer)
Reviewed by: tegge & rodrigc (mentor)
Approved by: rodrigc (mentor)
MFC after: 2 weeks
bread() the UFS superblock. Should eliminate crashes when trying
to do: mount -t ufs on an audio CD.
PR: kern/85893
Reported by: Russell Francis <rfrancis at ev dot net>
MFC after: 1 week
for file types other than VREG, VDIR and shared memory objects.
We already handle VREG, VLNK and VDIR cases. Silently ignore
truncate requests for all the rest. Adjust comments.
PR: kern/98064
Submitted by: bde
Security: local DoS
Regress. test: regression/fifo/fifo_misc
MFC after: 2 weeks
assuming them to be inflight write buffers. This is not always the case.
bufdaemon might hold the buffer lock and give up writing the buffer due to it
having dependencies, the file system being suspended or the vnode lock being
held by another thread. When bufdaemon decides to write the buffer there is
still a window before bufobj_wref() has been called, allowing other threads to
believe that the vnode has no dirty buffers or inflight writes.
Try harder to flush first block of new subdirectory to get rid of MKDIR_BODY
dependency.
same time as it is changed back into a normal file. The locker would
get the shared "snaplk" lock which would no longer be the correct lock
for the vnode.
buffers to go on the buf daemon's DIRTYGIANT queue.
- Set BO_NEEDSGIANT on ffs's devvp since the ffs_copyonwrite handler
runs in the context of the buf daemon and may require Giant.
enables multilabel, or any option for that matter, most likely they have
a reason. This will allow users to see that mulilabel is enabled via an
issued "mount" command and remove an annoying warning - printed only when
a MAC kernel is not installed - on boot up.
Discussed with: green, brueffer, Samy Al Bahra.
Probably ran past: csjp (though I can't remember).
This does not do what I wanted as all dirty buffers must be flushed
by the call to ffs_sync and any remaining dependency work would mean
that this failed.
Pointed out by: tegge
This does not do what I wanted as all dirty buffers must be flushed
by the call to ffs_sync and any remaining dependency work would mean
that this failed.
Pointed out by: tegge
Fix detection of active unlinked files by checking VI_OWEINACT and
VI_DOINGINACT in addition to v_usecount.
Defer inactive handling for unlinked files if the file system is mostly
suspended (secondary writes being blocked).
Perform deferred inactive handling after the file system is resumed.
replacement for vn_write_suspend_wait() to better account for secondary write
processing.
Close race where secondary writes could be started after ffs_sync() returned
but before the file system was marked as suspended.
Detect if secondary writes or softdep processing occurred during vnode sync
loop in ffs_sync() and retry the loop if needed.
be called without any vnode locks held. Remove calls to vn_start_write() and
vn_finished_write() in vnode_pager_putpages() and add these calls before the
vnode lock is obtained to most of the callers that don't already have them.
has many positive effects including improved smp locking, reducing
interdependencies between mounts that can lead to deadlocks, etc.
- Add the softdep worklist and various counters to the ufsmnt structure.
- Add a mount pointer to the workitem and remove mount pointers from the
various structures derived from the workitem as they are now redundant.
- Remove the poor-man's semaphore protecting softdep_process_worklist and
softdep_flushworklist. Several threads may now process the list
simultaneously.
- Add softdep_waitidle() to block the thread until all pending
dependencies being operated on by other threads have been flushed.
- Use softdep_waitidle() in unmount and snapshots to block either
operation until the fs is stable.
- Remove softdep worklist processing from the syncer and move it into the
softdep_flush() thread. This thread processes all softdep mounts
once each second and when it is called via the new softdep_speedup()
when there is a resource shortage. This removes the softdep hook
from the kernel and various hacks in header files to support it.
Reviewed by/Discussed with: tegge, truckman, mckusick
Tested by: kris
directory. vrele() may lock the passed vnode, which in these cases would
give an invalid lock order of child -> parent. These situations are
deadlock prone although do not typically deadlock because the vrele
is typically not releasing the last reference to the vnode. Users of
vrele must consider it as a call to vn_lock() and order it appropriately.
MFC After: 1 week
Sponsored by: Isilon Systems, Inc.
Tested by: kkenn
that NetBSD implemented it independently of them (don't know which one
was actually first). This saves about 24k for those times you don't
need snapshot support (like when running off a ram disk, or in an
embedded environment where size matters).
for export structure and pass that to vfs_export().
Currently in userland mount(8), an export structure is unconditionally
passed in, only for UFS. This is an attempt to move that UFS-specific
behavior out of mount(8) and into the UFS filesystem code.
callpath via vfs_getopt(), and set the appropriate MNT_* flag:
-> acls, async, force, multilabel, noasync, noatime,
-> noclusterr, noclusterw, snapshot, update
- Allow errmsg as a valid mount option via vfs_getopt(),
so we can later add a hook to propagate mount errors back
to userspace via vfs_mount_error().
- Prefer '_' to ' ', as it results in more easily parsed results in
memory monitoring tools such as vmstat.
- Remove punctuation that is incompatible with using memory type names
as file names, such as '/' characters.
- Disambiguate some collisions by adding subsystem prefixes to some
memory types.
- Generally prefer lower case to upper case.
- If the same type is defined in multiple architecture directories,
attempt to use the same name in additional cases.
Not all instances were caught in this change, so more work is required to
finish this conversion. Similar changes are required for UMA zone names.
to (max block - 1) * bsize. For DEV_BSIZE, this doubles the limit from
0.5 TB to 1 TB. For the old 4.4 FFS case, decrease the limit from 0.5 TB
to 2 GB - 1. Older systems had a 32 bit off_t so they couldn't access the
larger files anyway.
Collaboration with: bde
case by saving the value of dp->i_ino before unlocking the vnode
for the current directory and passing the saved value to VFS_VGET().
Without this change, another thread can overwrite dp->i_ino after
the current directory is unlocked, causing ufs_lookup() to lock
and return the wrong vnode in place of the vnode for its parent
directory. A deadlock can occur if dp->i_ino was changed to a
subdirectory of the current directory because the root to leaf vnode
lock ordering will be violated. A vnode lock can be leaked if
dp->i_ino was changed to point to the current directory, which
causes the current vnode lock for the current directory to be
recursed, which confuses lookup() into calling vrele() when it
should be calling vput().
The probability of this bug being triggered seems to be quite low
unless the sysctl variable debug.vfscache is set to 0.
Reviewed by: jhb
MFC after: 2 weeks
auto-start, set cnp.cn_lkflags to LK_EXCLUSIVE. This flag must now
be set so that lockmgr knows what kind of lock to acquire, and it
will panic if not specified. This resulted in a panic when using
extended attributes on UFS1 as of locking work present in the 6.x
branch.
This is a RELENG_6_0 merge candidate.
Reported by: lofi
MFC after: 3 days
updated by a process holding the snapshot lock. Another process updating a
different inode in the same inodeblock will do copy on write checks and lock in
the opposite direction.
The snapshot code force a copy on write of these blocks manually (cf. start of
expunge_ufs[12]) and these inode blocks are later put on snapblklist.
This partial fix is to 'drain' the relevant ffs_copyonwrite() operation after
installing new snapblklist. This is not a 100% solution since a failed block
allocation can cause implicit fsync() which might deadlock before the new
snapblklist has been installed.
file is flushed by a process not holding snaplk (e.g. bufdaemon). Another
process might hold snaplk and try to access the block due to ffs_copyonwrite
processing.
the cg map buffer being held when writing indirect blocks. The process ends up
in ffs_copyonwrite(), attempting to get snaplk while holding the cg map buffer
lock.
Another process might be in ffs_copyonwrite(), trying to allocate a new block
for a copy. It would hold snaplk while trying to get the cg map buffer lock.
Release the cg map buffer early and use the copy for most of the cgaccount
processing to avoid this deadlock.
skipping the call from ffs_snapremove() if the block number is zero.
Simplify snapshot locking in ffs_copyonwrite() and ffs_snapblkfree() by using
the same locking protocol for low block numbers as for larger block numbers.
This removes a lock leak that could happen if vn_lock() succeeded after
lockmgr() failed in ffs_snapblkfree().
Check if snapshot is gone before retrying a lock in ffs_copyonwrite().
reclamation. If the vnode previously was a fifo then v_op would point to
ffs_fifoops[12] instead of the expected ffs_vnodeops[12], causing a panic at
the end of ffsext_strategy.
stale flag bits left over from before the inode was recycled.
Without this change, a leftover IN_SPACECOUNTED flag could prevent
softdep_freefile() and softdep_releasefile() from incrementing
fs_pendinginodes. Because handle_workitem_freefile() unconditionally
decrements fs_pendinginodes, a negative value could be reported at
file system unmount time with a message like:
unmount pending error: blocks 0 files -3
The pending block count in fs_pendingblocks could also be negative
for similar reasons. These errors can cause the data returned by
statfs() to be slightly incorrect. Some other cleanup code in
softdep_releasefile() could also be incorrectly bypassed.
MFC after: 3 days
Add a new private thread flag to indicate that the thread should
not sleep if runningbufspace is too large.
Set this flag on the bufdaemon and syncer threads so that they skip
the waitrunningbufspace() call in bufwrite() rather than than
checking the proc pointer vs. the known proc pointers for these two
threads. A way of preventing these threads from being starved for
I/O but still placing limits on their outstanding I/O would be
desirable.
Set this flag in ffs_copyonwrite() to prevent bufwrite() calls from
blocking on the runningbufspace check while holding snaplk. This
prevents snaplk from being held for an arbitrarily long period of
time if runningbufspace is high and greatly reduces the contention
for snaplk. The disadvantage is that ffs_copyonwrite() can start
a large amount of I/O if there are a large number of snapshots,
which could cause a deadlock in other parts of the code.
Call runningbufwakeup() in ffs_copyonwrite() to decrement runningbufspace
before attempting to grab snaplk so that I/O requests waiting on
snaplk are not counted in runningbufspace as being in-progress.
Increment runningbufspace again before actually launching the
original I/O request.
Prior to the above two changes, the system could deadlock if enough
I/O requests were blocked by snaplk to prevent runningbufspace from
falling below lorunningspace and one of the bawrite() calls in
ffs_copyonwrite() blocked in waitrunningbufspace() while holding
snaplk.
See <http://www.holm.cc/stress/log/cons143.html>
the directory's inode after queuing the dirrem that will decrement
the parent directory's link count. This will force the update of
the parent directory's actual link to actually be scheduled. Without
this change the parent directory's actual link count would not be
updated until ufs_inactive() cleared the inode of the newly removed
directory, which might be deferred indefinitely. ufs_inactive()
will not be called as long as any process holds a reference to the
removed directory, and ufs_inactive() will not clear the inode if
the link count is non-zero, which could be the result of an earlier
system crash.
If a background fsck is run before the update of the parent directory's
actual link count has been performed, or at least scheduled by
putting the dirrem on the leaf directory's inodedep id_bufwait list,
fsck will corrupt the file system by decrementing the parent
directory's effective link count, which was previously correct
because it already took the removal of the leaf directory into
account, and setting the actual link count to the same value as the
effective link count after the dangling, removed, leaf directory
has been removed. This happens because fsck acts based on the
actual link count, which will be too high when fsck creates the
file system snapshot that it references.
This change has the fortunate side effect of more quickly cleaning
up the large number dirrem structures that linger for an extended
time after the removal of a large directory tree. It also fixes a
potential problem with the shutdown of the syncer thread timing out
if the system is rebooted immediately after removing a large directory
tree.
Submitted by: tegge
MFC after: 3 days
osf1_signal.c:1.41, amd64/amd64/trap.c:1.291, linux_socket.c:1.60,
svr4_fcntl.c:1.36, svr4_ioctl.c:1.23, svr4_ipc.c:1.18, svr4_misc.c:1.81,
svr4_signal.c:1.34, svr4_stat.c:1.21, svr4_stream.c:1.55,
svr4_termios.c:1.13, svr4_ttold.c:1.15, svr4_util.h:1.10,
ext2_alloc.c:1.43, i386/i386/trap.c:1.279, vm86.c:1.58,
unaligned.c:1.12, imgact_elf.c:1.164, ffs_alloc.c:1.133:
Now that Giant is acquired in uprintf() and tprintf(), the caller no
longer leads to acquire Giant unless it also holds another mutex that
would generate a lock order reversal when calling into these functions.
Specifically not backed out is the acquisition of Giant in nfs_socket.c
and rpcclnt.c, where local mutexes are held and would otherwise violate
the lock order with Giant.
This aligns this code more with the eventual locking of ttys.
Suggested by: bde
in rev. 1.40 of ufs_inode.c, which allows an inode being truncated
even when the filesystem itself is marked RDONLY. A subsequent
call of UFS_TRUNCATE (ffs_truncate) would panic the system as it
asserts that it can only be called when the filesystem is mounted
read-write (same changeset, rev. 1.74 of sys/ufs/ffs/ffs_inode.c).
Because ffs_mount() already takes care of sync'ing the filesystem
to disk before being downgraded to readonly, it appears to be more
desirable that we should not permit this sort of writes to disk.
This change would fix a panic that occours when read-only mounted
a corrupted filesystem and doing some file operations.
MT6/5/4 candidate
Reviewed by: mckusick
as they both interact with the tty code (!MPSAFE) and may sleep if the
tty buffer is full (per comment).
Modify all consumers of uprintf() and tprintf() to hold Giant around
calls into these functions. In most cases, this means adding an
acquisition of Giant immediately around the function. In some cases
(nfs_timer()), it means acquiring Giant higher up in the callout.
With these changes, UFS no longer panics on SMP when either blocks are
exhausted or inodes are exhausted under load due to races in the tty
code when running without Giant.
NB: Some reduction in calls to uprintf() in the svr4 code is probably
desirable.
NB: In the case of nfs_timer(), calling uprintf() while holding a mutex,
or even in a callout at all, is a bad idea, and will generate warnings
and potential upset. This needs to be fixed, but was a problem before
this change.
NB: uprintf()/tprintf() sleeping is generally a bad ideas, as is having
non-MPSAFE tty code.
MFC after: 1 week
Also introduce an aclinit function which will be used to create the UMA zone
for use by file systems at system start up.
MFC after: 1 month
Discussed with: rwatson
Don't free a struct inodedep if another process is allocating saved inode
memory for the same struct inodedep in initiate_write_inodeblock_ufs[12]().
Handle disappearing dependencies in softdep_disk_io_initiation().
Reviewed by: mckusick
or unreadable blocks, make sure to destroy the mutex we created.
Also fix an unrelated typo in a comment.
Found by: Peter Holm's stress tests
Reviewed by: dwmalone
MFC after: 3 days
make the b_iodone callback responsible for setting it if it is needed.
Previously, it was set unconditionally by bufdone() without holding
whichever lock is shared by the b_iodone callback and the corresponding
top-half function. Consequently, in a race, the top-half function could
conclude that operation was done before the b_iodone callback finished.
See, for example, aio_physwakeup() and aio_fphysio().
Note: I don't believe that the other, more widely-used b_iodone callbacks
are affected.
Discussed with: jeff
Reviewed by: phk
MFC after: 2 weeks
