o Remove All Rights Reserved from my notices
o imp@FreeBSD.org everywhere
o regularize punctiation, eliminate date ranges
o Make sure that it's clear that I don't claim All Rights reserved by listing
All Rights Reserved on same line as other copyright holders (but not
me). Other such holders are also listed last where it's clear.
The previous revision missed the exact same error in a copy paste block
of the same code in another function. Fix the identical case, too.
A DHCP client identifier is simply the hardware type (one byte)
concatenated with the hardware address (some variable number of bytes,
but at most 16). Limit the size of the temporary buffer to match and
the rest of the calculations shake out correctly.
PR: 238022
Reported by: Young <yangx92 AT hotmail.com>
Submitted by: Young <yangx92 AT hotmail.com>
MFC after: I don't plan to but you should feel free
Security: yes
Before my refactoring the code reported value as maximum number of sectors,
adding one to the maximum sector number returned by respective command.
While this difference is somewhat confusing, restore previous behavior.
MFC after: 3 days
Previously the mkfs_msdos function (from newfs_msdos) emitted warnings
in the case that an image size is specified and the target is not a
file, or no size is specified and the target is not a character device.
The latter warning (not a character device) doesn't make sense when this
code is used in makefs, regardless of whether an image size is specified
or not.
Sponsored by: The FreeBSD Foundation
mdmfs(8) lacks the ability to populate throwaway memory filesystems from an
existing directory.
This features permits an interesting setup where /var for instance lives on
a device where wear-leveling is something you want to avoid as much as
possible and nonetheless you don't want to lose your logs, ports metadata,
etc. Here are the steps:
1. Copy /var to /var.bak;
2. Mount an mfs into /var using -k /var.bak at startup;
3. Synchronize /var to /var.bak weekly and on shutdown.
Note that this more or less mimics OpenBSD's mount_mfs(8) -P flag.
PR: 146254
Submitted by: jlh (many moons ago)
MFC after: 1 week
This corrects an oversight from r351423.
Submitted by: Ján Sučan <sucanjan@gmail.com>
MFC after: Never
Differential Revision: https://reviews.freebsd.org/D22093
The change is for the example in textdump.4 and the default ddb.conf.
First of all, doadump now requires an argument and it won't do a
textdump if the argument is not 'true'.
And 'textdump dump' is more idiomatic anyway.
For what it's worth, ddb 'dump' command seems to always request a vmcore
dump even if a textdump was requested earlier, e.g., by 'textdump set'.
Finally, ddb 'call' command is not documented.
MFC after: 2 weeks
-o will force the origin to be destroyed unconditionally.
BE_DESTROY_AUTOORIGIN, on the other hand, will only destroy the origin if it
matches the format used by be_snapshot. This lets us clean up the snapshots
that are clearly not user-managed (because we're creating them) while
leaving user-created snapshots in place and warning that they're still
around when the BE created goes away.
By default next_cmd() initializes only first u32 of opcode. O_ICMP6TYPE
opcode has array of bit masks to store corresponding ICMPv6 types.
An opcode that precedes O_ICMP6TYPE, e.g. O_IP6_DST, can have variable
length and during opcode filling it can modify memory that will be used
by O_ICMP6TYPE opcode. Without explicit initialization this leads to
creation of wrong opcode.
Reported by: Boris N. Lytochkin
Obtained from: Yandex LLC
MFC after: 3 days
This change allows to specify a watchdog(9) timeout for a system
shutdown. The timeout is activated when the watchdogd daemon is
stopped. The idea is to a prevent any indefinite hang during late
stages of the shutdown. The feature is implemented in rc.d/watchdogd,
it builds upon watchdogd -x option.
Note that the shutdown timeout is not actiavted when the watchdogd
service is individually stopped by an operator. It is also not
activated for the 'shutdown' to the single-user mode. In those cases it
is assumed that the operator knows what they are doing and they have
means to recover the system should it hang.
Significant subchanges and implementation details:
- the argument to rc.shutdown, completely unused before, is assigned to
rc_shutdown variable that can be inspected by rc scripts
- init(8) passes "single" or "reboot" as the argument, this is not
changed
- the argument is not mandatory and if it is not set then rc_shutdown is
set to "unspecified"
- however, the default jail management scripts and jail configuration
examples have been updated to pass "jail" to rc.shutdown, just in case
- the new timeout can be set via watchdogd_shutdown_timeout rc option
- for consistency, the regular timeout can now be set via
watchdogd_timeout rc option
- watchdogd_shutdown_timeout and watchdogd_timeout override timeout
specifications in watchdogd_flags
- existing configurations, where the new rc options are not set, should
keep working as before
I am not particularly wed to any of the implementation specifics.
I am open to changing or removing any of them as long as the provided
functionality is the same (or very close) to the proposed one.
For example, I think it can be implemented without using watchdogd -x,
by means of watchdog(1) alone. In that case there would be a small
window between stopping watchdogd and running watchdog, but I think that
that is acceptable.
Reviewed by: bcr (man page changes)
MFC after: 5 weeks
Relnotes: yes
Differential Revision: https://reviews.freebsd.org/D21221
The kernel won't crash if you have a bad value and I'd rather not have
nvmecontrol know the internal details about how the nvme driver limits
the transfer size.
addition, the flags are optional, but were made to be mandatory. Set
these things, as well as santiy check the specified size.
Submitted by: Stefan Rink
PR: 240798
The two options are
* nocover/cover: Prevent/allow mounting over an existing root mountpoint.
E.g., "mount -t ufs -o nocover /dev/sd1a /usr/local" will fail if /usr/local
is already a mountpoint.
* emptydir/noemptydir: Prevent/allow mounting on a non-empty directory.
E.g., "mount -t ufs -o emptydir /dev/sd1a /usr" will fail.
Neither of these options is intended to be a default, for historical and
compatibility reasons.
Reviewed by: allanjude, kib
Differential Revision: https://reviews.freebsd.org/D21458
ping(8) uses SO_TIMESTAMP, which attaches a timestamp to each IP datagram at
the time it's received by the kernel. Except that occasionally it doesn't.
Add a check to see whether such a timestamp was actually set before trying
to read it. This fixes segfaults that can happen when the kernel doesn't
attach a timestamp.
The bug has always existed, but prior to r351461 it manifested as an
implausible round-trip-time, not a segfault.
Reported by: pho
MFC after: 3 days
MFC-With: 351461
':'. It's slightly wasteful, but much easier (and the savings in bytes
at runtime would be tiny, but the code to do it larger).
Submitted by: Sebastian Huber
This command simply returns 0 at the moment and explicitly takes no
arguments. This should be used by utilities wanting to see if bectl can
operate on the system they're running, or with a specific root (`bectl -r`).
It may grow more checks than "will libbe successfully init" in the future,
but for now this is enough as that checks for the dataset mounted at "/" and
that it looks capable of being a BE root (e.g. it's not a top-level dataset)
bectl commands can now specify if they want to be silent, and this will turn
off libbe_print_on_error so they can control the output as needed. This is
already used in `bectl check`, and may be turned on in the future for some
other commands where libbe errors are better suppressed as the failure mode
may be obvious.
Requested by: David Fullard
MFC after: 3 days
Previously without -m parameter it worked mostly by concodence.
While there, make page/subpage values validation more strict.
MFC after: 5 days
Sponsored by: iXsystems, Inc.
This turns into a warning in GCC 4.2 that 'reverse' may be used
uninitialized in this function. While I don't immediately see where it's
deciding this from (there's only two paths that make column != NULL, and
they both set reverse), initializing reverse earlier is good for clarity.
MFC after: 3 days
- Remove incomplete and dangerous ata_res decoding from ata_do_cmd().
Instead switch all functions that need the result to use get_ata_status(),
doing the same, but more careful, also reducing code duplication.
- Made get_ata_status() to also decode fixed format sense. In many cases
it is still not enough to make it useful, since it can only report results
of 28-bit command, but it is slightly better then nothing.
- Organize error reporting in ata_do_cmd(), so that if caller specified
AP_FLAG_CHK_COND, it is responsible for command errors (non-ioctl ones).
- Make HPA/AMA errors not fatal for `identify` subcommand.
- Fix reprobe() not being called on HPA/AMA when in quiet mode.
- Remove not very useful messages from `format` and `sanitize` commands
with -y flag. Once they started, they often can't be stopped any way.
MFC after: 5 days
Sponsored by: iXsystems, Inc.
Error there mean that command was not even executed, and all information
we have about it is errno, and cam_error_print() call is not very useful.
Plus it is most likely a programmatic error, that shoud not happen.
MFC after: 1 week
Sponsored by: iXsystems, Inc.
This is a rework of r344701, that noticed that number of bytes passes to
8 bit sector count field gets truncated. First decision was to not pass
anything, since ATA specs define the field as N/A. But it appeared to be a
problem for some SAT devices, that require information about data transfer
to operate properly. Some additional investigation shown that it is quite
a common practice to set unused fields of ATA commands (fortunately ATA
specs formally allow it) to supply the information to SAT layer. I have
found SAS-SATA interposer that does not allow pass-through without it.
As side effect, reduce code duplication by removing ata_do_28bit_cmd()
function, replacing it with more universal ata_do_cmd().
MFC after: 1 week
Sponsored by: iXsystems, Inc.
The default package use to be FreeBSD-runtime but it should only contain
binaries and libs enough to boot to single user and repair the system, it
is also very handy to have a package that can be tranform to a small mfsroot.
So create a new package named FreeBSD-utilities and make it the default one.
Also move a few binaries and lib into this package when it make sense.
Reviewed by: bapt, gjb
Differential Revision: https://reviews.freebsd.org/D21506
It doesn't need to be in runtime and might help people who want to
experiment with other rc system or don't use one (like in small
embedded mfsroot).
Reviewed by: bapt, gjb
Differential Revision: https://reviews.freebsd.org/D21499
The Host Buffer feature (NVMe 1.4 section 89) allows for the NVMe card
request the host provide it buffer for lookaside tables and maybe
other things. Report the card's minimum and preferred sizes with
nvmecontrol/camcontrol identify.
Allow 'bectl list' to sort output by a given property name. The property
name is passed in using a command-line flag, '-c' for ascending order and
'-C' for descending order. The properties allowed to sort by are:
- name (the default output, even if '-c' or '-C' are not used)
- creation
- origin
- used
- usedds
- usedsnap
- usedrefreserv
The default output for 'bectl list' is now ascending alphabetical order of
BE name.
To sort by creation time from earliest to latest, the command would be
'bectl list -c creation'
Submitted by: Rob Fairbanks <rob.fx907 gmail com>
Reviewed by: ler
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D20818
KTLS adds support for in-kernel framing and encryption of Transport
Layer Security (1.0-1.2) data on TCP sockets. KTLS only supports
offload of TLS for transmitted data. Key negotation must still be
performed in userland. Once completed, transmit session keys for a
connection are provided to the kernel via a new TCP_TXTLS_ENABLE
socket option. All subsequent data transmitted on the socket is
placed into TLS frames and encrypted using the supplied keys.
Any data written to a KTLS-enabled socket via write(2), aio_write(2),
or sendfile(2) is assumed to be application data and is encoded in TLS
frames with an application data type. Individual records can be sent
with a custom type (e.g. handshake messages) via sendmsg(2) with a new
control message (TLS_SET_RECORD_TYPE) specifying the record type.
At present, rekeying is not supported though the in-kernel framework
should support rekeying.
KTLS makes use of the recently added unmapped mbufs to store TLS
frames in the socket buffer. Each TLS frame is described by a single
ext_pgs mbuf. The ext_pgs structure contains the header of the TLS
record (and trailer for encrypted records) as well as references to
the associated TLS session.
KTLS supports two primary methods of encrypting TLS frames: software
TLS and ifnet TLS.
Software TLS marks mbufs holding socket data as not ready via
M_NOTREADY similar to sendfile(2) when TLS framing information is
added to an unmapped mbuf in ktls_frame(). ktls_enqueue() is then
called to schedule TLS frames for encryption. In the case of
sendfile_iodone() calls ktls_enqueue() instead of pru_ready() leaving
the mbufs marked M_NOTREADY until encryption is completed. For other
writes (vn_sendfile when pages are available, write(2), etc.), the
PRUS_NOTREADY is set when invoking pru_send() along with invoking
ktls_enqueue().
A pool of worker threads (the "KTLS" kernel process) encrypts TLS
frames queued via ktls_enqueue(). Each TLS frame is temporarily
mapped using the direct map and passed to a software encryption
backend to perform the actual encryption.
(Note: The use of PHYS_TO_DMAP could be replaced with sf_bufs if
someone wished to make this work on architectures without a direct
map.)
KTLS supports pluggable software encryption backends. Internally,
Netflix uses proprietary pure-software backends. This commit includes
a simple backend in a new ktls_ocf.ko module that uses the kernel's
OpenCrypto framework to provide AES-GCM encryption of TLS frames. As
a result, software TLS is now a bit of a misnomer as it can make use
of hardware crypto accelerators.
Once software encryption has finished, the TLS frame mbufs are marked
ready via pru_ready(). At this point, the encrypted data appears as
regular payload to the TCP stack stored in unmapped mbufs.
ifnet TLS permits a NIC to offload the TLS encryption and TCP
segmentation. In this mode, a new send tag type (IF_SND_TAG_TYPE_TLS)
is allocated on the interface a socket is routed over and associated
with a TLS session. TLS records for a TLS session using ifnet TLS are
not marked M_NOTREADY but are passed down the stack unencrypted. The
ip_output_send() and ip6_output_send() helper functions that apply
send tags to outbound IP packets verify that the send tag of the TLS
record matches the outbound interface. If so, the packet is tagged
with the TLS send tag and sent to the interface. The NIC device
driver must recognize packets with the TLS send tag and schedule them
for TLS encryption and TCP segmentation. If the the outbound
interface does not match the interface in the TLS send tag, the packet
is dropped. In addition, a task is scheduled to refresh the TLS send
tag for the TLS session. If a new TLS send tag cannot be allocated,
the connection is dropped. If a new TLS send tag is allocated,
however, subsequent packets will be tagged with the correct TLS send
tag. (This latter case has been tested by configuring both ports of a
Chelsio T6 in a lagg and failing over from one port to another. As
the connections migrated to the new port, new TLS send tags were
allocated for the new port and connections resumed without being
dropped.)
ifnet TLS can be enabled and disabled on supported network interfaces
via new '[-]txtls[46]' options to ifconfig(8). ifnet TLS is supported
across both vlan devices and lagg interfaces using failover, lacp with
flowid enabled, or lacp with flowid enabled.
Applications may request the current KTLS mode of a connection via a
new TCP_TXTLS_MODE socket option. They can also use this socket
option to toggle between software and ifnet TLS modes.
In addition, a testing tool is available in tools/tools/switch_tls.
This is modeled on tcpdrop and uses similar syntax. However, instead
of dropping connections, -s is used to force KTLS connections to
switch to software TLS and -i is used to switch to ifnet TLS.
Various sysctls and counters are available under the kern.ipc.tls
sysctl node. The kern.ipc.tls.enable node must be set to true to
enable KTLS (it is off by default). The use of unmapped mbufs must
also be enabled via kern.ipc.mb_use_ext_pgs to enable KTLS.
KTLS is enabled via the KERN_TLS kernel option.
This patch is the culmination of years of work by several folks
including Scott Long and Randall Stewart for the original design and
implementation; Drew Gallatin for several optimizations including the
use of ext_pgs mbufs, the M_NOTREADY mechanism for TLS records
awaiting software encryption, and pluggable software crypto backends;
and John Baldwin for modifications to support hardware TLS offload.
Reviewed by: gallatin, hselasky, rrs
Obtained from: Netflix
Sponsored by: Netflix, Chelsio Communications
Differential Revision: https://reviews.freebsd.org/D21277
The following checks are now being enforced:
- bpbBytesPerSec: only accept 512, 1024, 2048 and 4096.
- bpbSecPerClust: only accept 1, 2, 4, 8, 16, 32, 64 and 128.
- bpbResSectors: require non-zero.
- bpbFATs: require non-zero.
- bpbSectors: require zero for FAT32.
- bpbFATsmall: require zero for FAT32.
- bpbHugeSectors: require non-zero for FAT32.
Bail out if the BPB contained values that do not meet these requirements.
We also require FATsecs * FATsecs to not overflow 32-bit unsigned
integer.
Check for backup boot block was removed because the checker does not take
corrective action, and msdosfs driver ignores it too.
