The old way of just returning could result in a file system
extremely likely to panic the kernel. The warning printed
wouldn't help much since tools invoking newfs(8), e.g., mdmfs(8),
couldn't detect the error.
PR: bin/55078
MFC after: 1 week
1: add 'const' to char * where needed;
2: mark unused variables with __unused;
3: remove double prototypes for mode_edit and mode_list.
4: moves the global variables 'bus', 'target', and 'lun' into
the main function and protect them with #ifndef MINIMALISTIC,
5: renames 3 variable in order not to shadow other things
index -> indx -- in modepage_dump since index is a function
from <strings.h.>
arglist -> arglst -- in the function parse_btl since arglist
is also a global variable
convertend -> convertend2 -- in the function editentry_set
since that name is used two times within the function.
6: cast 0xffffffff in the macro RESOLUTION_MAX(size) to (int)
since it is unsigned otherwise.
Tested by: make universe
Approved by: ken
The old firmware (3.0.1) can still be used by specifying the '-3' option
to fore_dnld.
Document the -r option that resets the adapter prior to the download.
Ther newer firmware version allows traffic shaping.
requests if the interface has an active link. This is a
great benefit if you often change networks with your laptop
and you do not like to kill/restart dhclient all the time.
Changes are automatically detected and the link is refreshed.
The change allows us to start dhclient in background mode
Enable dhclient to poll the interface state and send only
requests if the interface has an active link. This is a
great benefit if you often change networks with your laptop
and you do not like to kill/restart dhclient all the time.
Changes are automatically detected and the link is refreshed.
The change allows us to start dhclient in background mode
while the network cable is not plugged in.
To control the polling interval, the option -i has been
introduced. It takes seconds as parameter, the minimum is
one second, the default is five seconds.
Polling is done in seconds, not microseconds, because dhclient
does internally work with timeouts in seconds.
This change will be part of the next major ISC-dhcpd release.
Tested by: bms, imp, and many many others.
Reviewed by: murray, eivind, dhclient folks
- remove some instances of __P()
- use real prototypes and un-K&R function headers
- constify where necessary (mostly strings and structures containing
strings)
- make functions and variables static that need not to be global
- tag unused function parameters as __unused
Testing: a fresh universe
than at the vendor. We have three different Fore cards and only the PCA200
need the microcode. Look also at the RAM address and load the code only if
it is not zero. A zero RAM address means either a bug in the driver or
this is a interface created by harp(4) in which case fatm(4) handles the
microcode issue.
The output format specifier for the round-trip time in ping6 should be
changed to %.3f instead of %g since %g doesn't accurately represent the
precision of the number being output. In particular, %g truncates trailing
zeroes. 0.01 ms does not mean the same thing as 0.010 ms. Although they
are numerically identical, they do not have the same precision.
PR: bin/52324, bin/52750
Submitted by: dg
MFC after: 1 week
and make it work more reliably in a number of cases that have
traditionally been troublesome. The new behaviour is:
1) If the filesystem can be determined by the fsid or device,
or uniquely identified by the mountpoint, then just go ahead
and call unmount(2) using the file system ID.
2) Otherwise use fstatfs(2) to resolve the path into a file system
ID (checking with stat(2) that it is a filesystem root directory).
Case 2 can potentially block if an NFS server is down, but it can
always be avoided by using an unambiguous specification. It handles
all the hard cases such as symlinks and mismatches between the mount
list and reality. For example, if a filesystem was mounted as /mnt
inside a chroot, it will show up in the mount list as /mnt, but now
you can unmount it from outside the chroot with "umount /chroot_path/mnt".
ID for each file system in addition to the normal information.
In umount(8), accept filesystem IDs as well as the usual device and
path names. This makes it possible to unambiguously specify which
file system is to be unmounted even when two or more file systems
share the same device and mountpoint names (e.g. NFS mounts from
the same export into different chroots).
Suggested by: Dan Nelson <dnelson@allantgroup.com>
of by mount point, umount had to take care not to unmount the wrong
file system if another file system was covering the requested one.
Now that the file system to unmount is specified to the kernel using
the filesystem ID, this confusion cannot occur, so remove the code
that checked for it.
Allow set 31 to be used for rules other than 65535.
Set 31 is still special because rules belonging to it are not deleted
by the "ipfw flush" command, but must be deleted explicitly with
"ipfw delete set 31" or by individual rule numbers.
This implement a flexible form of "persistent rules" which you might
want to have available even after an "ipfw flush".
Note that this change does not violate POLA, because you could not
use set 31 in a ruleset before this change.
Suggested by: Paul Richards
o Warn when recieved packet length is not equal to length of the
packet we sent out. Idea from NetBSD.
o Fit the dump of packet with wrong data to 80 columns (from NetBSD).
Comments from: bde
introduced in the latest commits).
Also:
* update the 'ipfw -h' output;
* allow rules of the form "100 add allow ..." i.e. with the index first.
(requested by Paul Richards). This was an undocumented ipfw1 behaviour,
and it is left undocumented.
and minor code cleanups.
* make the code compile with WARNS=5 (at least on i386), mostly
by adding 'const' specifier and replacing "void *" with "char *"
in places where pointer arithmetic was used.
This also spotted a few places where invalid tests (e.g. uint < 0)
were used.
* support ranges in "list" and "show" commands. Now you can say
ipfw show 100-1000 4000-8000
which is very convenient when you have large rulesets.
* implement comments in ipfw commands. These are implemented in the
kernel as O_NOP commands (which always match) whose body contains
the comment string. In userland, a comment is a C++-style comment:
ipfw add allow ip from me to any // i can talk to everybody
The choice of '//' versus '#' is somewhat arbitrary, but because
the preprocessor/readfile part of ipfw used to strip away '#',
I did not want to change this behaviour.
If a rule only contains a comment
ipfw add 1000 // this rule is just a comment
then it is stored as a 'count' rule (this is also to remind
the user that scanning through a rule is expensive).
* improve handling of flags (still to be completed).
ipfw_main() was written thinking of 'one rule per ipfw invocation',
and so flags are set and never cleared. With readfile/preprocessor
support, this changes and certain flags should be reset on each
line. For the time being, only fix handling of '-a' which
differentiates the "list" and "show" commands.
* rework the preprocessor support -- ipfw_main() already had most
of the parsing code, so i have moved in there the only missing
bit (stripping away '#' and comments) and removed the parsing
from ipfw_readfile().
Also, add some more options (such as -c, -N, -S) to the readfile
section.
MFC after: 3 days
