Add pcie-controller node as a bus-parent of pcie nodes for Armada38x
boards. This reduces diff between Linux and FreeBSD PCIe device tree
representation to the minimum. This commit also allows for using multiple
PCIe ports, thanks to the recent driver updates, which support such
hierarchy. Restore original PCIe nodes in armada-385.dtsi and
apply necessary changes in hitherto unused armada-380.dtsi.
Submitted by: Michal Mazur <mkm@semihalf.com>
Marcin Wojtas <mw@semihalf.com>
Obtained from: Semihalf
Sponsored by: Stormshield, Netgate
Differential revision: https://reviews.freebsd.org/D10907
This commit is another part of preparation for PCIe multi-port
support for Marvell SoCs. Some device trees include pcie-controller
node as a bus-parent of pcie nodes. This patch adds support for
new bus, collects and configures device informations and finally
adds PCIB devices as a childs of pcie-controller in Newbus hierarchy.
Submitted by: Marcin Mazurek <mma@semihalf.com>
Obtained form: Semihalf
Sponsored by: Stormshield
Reviewed by: https://reviews.freebsd.org/D10906
Original PCIe nodes for Marvell SoCs consists of ports' nodes
under main controller node. In order to properly parse
this kind of representation in DT a mechanism for traversing
through the tree required an update. Moreover, processing FDT
data consisting of more than 2 cells had to be fixed,
because the 'reg' property of mrvl,pcie node have additional
parameter in front of 64-bit address. It should be skipped
by default. This commit works properly with old mrvl,pcie
representation for Kirkwood and ArmadaXP SoCs.
Submitted by: Wojciech Macek <wma@semihalf.com>
Michal Mazur <mkm@semihalf.com>
Obtained from: Semihalf
Sponsored by: Stormshield, Netgate
Differential revision: https://reviews.freebsd.org/D10905
This patch fixes sporadic problems with updating time
with mv_rtc driver by configuring access to it via MBUS.
For this purpose already existing second set of resources
in rtc@3800 node of Armada 38x DT is used.
Submitted by: Dominik Ermel <der@semihalf.com>
Obtained from: Semihalf
Sponsored by: Stormshield
Differential revision: https://reviews.freebsd.org/D10901
This commit enables optional reset of the RTC, in case
its registers' contents did not sustain the reboot or power-off/on
sequence. Without it, further usage of RTC is impossible
(e.g. writing values to RTC_TIME register will not succeed).
The reset is performed only if Clock Correction register
does not comprise RTC_NOMINAL_TIMING, what helps to distinguish,
whether the software configured RTC before or it comprises
the default value.
Submitted by: Bartosz Szczepanek <bsz@semihalf.com>
Obtained from: Semihalf
Sponsored by: Stormshield
Differential revision: https://reviews.freebsd.org/D10900
r31386 changed how the size of the VM page array was calculated to be
less wasteful. For most systems, the amount of memory is divided by
the overhead required by each page (a page of data plus a struct vm_page)
to determine the maximum number of available pages. However, if the
remainder for the first non-available page was at least a page of data
(so that the only memory missing was a struct vm_page), this last page
was left in phys_avail[] but was not allocated an entry in the VM page
array. Handle this case by explicitly excluding the page from
phys_avail[].
Reviewed by: alc
Sponsored by: DARPA / AFRL
Differential Revision: https://reviews.freebsd.org/D11000
subtree is already zero, then setting the "largest contiguous free block"
hint for that subtree to anything other than zero makes no sense. To be
clear, assigning a value to the hint that is too large is not a correctness
problem, only a pessimization.
Dragonfly BSD has applied the same change to blst_meta_alloc() but not
blst_meta_fill().
MFC after: 6 weeks
Currently the PCI domain is initialized with the instance GUID in
vmbus_pcib_attach(). It turns out the GUID can change across VM reboot,
while some users want a persistent value for PCI domain. The solution is
that we can change to use the device serial number, which starts with 1
and is unique within a VM.
Obtained from: Haiyang Zhang
MFC after: 1 day
Sponsored by: Microsoft
This happens when closing a socket with upcall, and trace is: soclose()->
... protocol ... -> soisdisconnected() -> socantrcvmore_locked() ->
sowakeup() -> soisconnected().
Right now this case is innocent for two reasons. First, soisconnected()
doesn't clear SS_ISDISCONNECTED flag. Second, the mutex to lock the
socket is the socket receive buffer mutex, and sodisconnected() first
disables the receive buffer. But in future code, the mutex to lock
socket is different to buffer mutex, and we would get undesired mutex
recursion.
The fix is to check SS_ISDISCONNECTED flag before calling upcall.
ARM and MIPS fail universe builds.
ARM and MIPS are missing the following:
* VM_MEMATTR_WRITE_THROUGH
* VM_MEMATTR_WRITE_COMBINING
Pointy-hat to: jhibbits
arm, mips, and powerpc all implement pmap_mapdev_attr() and pmap_unmapdev(),
so add those archs to the checks. powerpc also includes the atomic_swap_*()
functions, so add that to the supported list as well. Not tested except by
compiling powerpc.
Reviewed by: markj
testing purposes. However, over the years, various changes to the kernel
have broken this feature. This revision applies some fixes to get user-
space compilation working again. There are no changes in this revision
to code that is used by the kernel.
MFC after: 3 days
beginning of a swap area for a disk label. However, neither r118390 nor
r118544, which increased the reservation from one to two blocks, correctly
accounted for these blocks when updating the variable "swap_pager_avail".
This change corrects that error.
Reviewed by: kib
MFC after: 5 days
CPU_FOREACH() is not available until SI_SUB_CPU at SI_ORDER_ANY
when the LinuxKPI is loaded as part of the kernel.
MFC after: 1 week
Sponsored by: Mellanox Technologies
pager used a different scheme for striping the allocation of swap space
across multiple devices. And, although blist_fill() was intended to support
fill operations with large counts, the old striping scheme never performed a
fill larger than the stripe size. Consequently, the misplacement of a
sanity check in blst_meta_fill() went undetected. Now, moving forward in
time to r118390, a new scheme for striping was introduced that maintained a
blist allocator per device, but as noted in r318995, swapoff_one() was not
fully and correctly converted to the new scheme. This change completes what
was started in r318995 by fixing the underlying bug in blst_meta_fill() that
stops swapoff_one() from simply performing a single blist_fill() operation.
Reviewed by: kib
MFC after: 5 days
Differential Revision: https://reviews.freebsd.org/D11043
You may now optionally specify allow.noreserved_ports to prevent root
inside a jail from using privileged ports (less than 1024)
PR: 217728
Submitted by: Matt Miller <mattm916@pulsar.neomailbox.ch>
Reviewed by: jamie, cem, smh
Relnotes: yes
Differential Revision: https://reviews.freebsd.org/D10202
short, half of the memory that is allocated to implement the radix tree is
wasted because we did not change "u_daddr_t" to be a 64-bit unsigned int
when we changed "daddr_t" to be a 64-bit (signed) int. (See r96849 and
r96851.)
Reviewed by: kib, markj
Tested by: pho
MFC after: 5 days
Differential Revision: https://reviews.freebsd.org/D11028
inode number or link count for the ABI compat binaries.
Right now, and by default after the change, too large 64bit values are
silently truncated to 32 bits. Enabling the knob causes the system to
return EOVERFLOW for stat(2) family of compat syscalls when some
values cannot be completely represented by the old structures. For
getdirentries(2), knob skips the dirents which would cause non-trivial
truncation of d_ino.
EOVERFLOW error is specified by the X/Open 1996 LFS document
('Adding Support for Arbitrary File Sizes to the Single UNIX
Specification').
Based on the discussion with: bde
Sponsored by: The FreeBSD Foundation
It turns out that this is useful on hornet and wasp SoCs but it isn't
enabled in ye olde HAL /unless/ you were using a version from one of the
business units building USB targetted devices. It eventually got fixed
for all of them as people started wanting to use the USB ports on their
SoCs (eg for flash storage, bluetooth, 4G/LTE widgets, etc.)
This is actually a fix from ath9k but I'm merging it with the available-but-
disabled code in the QCA reference HAL.
Tested:
* AR9331 SoC
* Firmware versions 21 and 22 generate some IWM_DEBUG_LOG_MSG notifications,
which seem to be harmless. Avoid spamming the system log with
"frame ... UNHANDLED (this should not happen)" messages.
Obtained from: dragonflybsd.git dda889ac57d8e5b46bb1b1ecf53c17a18481c7c8
* If device family is 8000 then iwm_pcie_load_cpu_sections()
won't be called at all (iwm_pcie_load_cpu_sections_8000() is
called in that case) so this piece of code never gets called.
Obtained from: dragonflybsd.git 3e9aaef308100a4d630feffc131e3aca2ae12f8a
* LAR can be disabled with the hw.iwm.lar.disable tunable now.
* On Family 8000 devices we need to check the lar_enabled flag from
nvm_data in addition to the TLV_CAPA_LAR_SUPPORT flag from the firmware.
* Add a separate IWM_DEBUG_LAR debugging flag.
Obtained from: dragonflybsd.git 0593e39cb295aa996ecf789ed4990c3b255f1770
* This change also fixes a possible issue in the existing smart-fifo code,
which set the IWM_SF_CFG_DUMMY_NOTIF_OFF bit on AC8260 chipsets, although
that's only used in iwlwifi for Family 8000 chipsets connected via SDIO
interface.
Obtained from: Dragonflybsd.git cb650b01526b0aeef3c4307d926e7f1428997d50
Coverity warned that the switch statement fell through. While this was
intentional, the pattern wasn't especially clear. I just changed it to a
conventional if pattern.
Reported by: Coverity
CIDs: 1375851 (false positive), 1375853
Sponsored by: Dell EMC Isilon
The ICMP6 packets might not be contained in a single mbuf. So don't
assume this. Keep the IPv4 and IPv6 code in sync and make explicit
that the syncache code only need the TCP sequence number, not the
complete TCP header.
MFC after: 3 days
Sponsored by: Netflix, Inc.
