This allows specifying a %job (which is equivalent to the corresponding
process group).
Additionally, it improves reliability of kill from sh in high-load
situations and ensures "kill" finds the correct utility regardless of PATH,
as required by POSIX (unless the undocumented %builtin mechanism is used).
Side effect: fatal errors (any error other than kill(2) failure) now return
exit status 2 instead of 1. (This is consistent with other sh builtins, but
not in NetBSD.)
Code size increases about 1K on i386.
Obtained from: NetBSD
The #define for warnx now behaves much like the libc function (except that
it uses sh command name and output).
Also, it now uses C99 __VA_ARGS__ so there is no need for three different
macros for 0, 1 or 2 parameters.
Constants in arithmetic starting with 0 should be octal only.
This avoids the following highly puzzling result:
$ echo $((018-017))
3
by making it an error instead.
c is assigned 0 and *loc is pointing to NULL, so c!=0 cannot be true,
and dereferencing loc would be a bad idea anyway.
Coverity Prevent: CID 5113
Reviewed by: jilles
The CTLESC byte to protect a special character was output before instead of
after a newline directly preceding the special character.
The special handling of newlines is because command substitutions discard
all trailing newlines.
* Prefer kill(-X) to killpg(X).
* Remove some dead code.
* No additional SIGINT is needed if int_pending() is already true.
No functional change is intended.
The herefd hack wrote out partial here documents while expanding them. It
seems unnecessary complication given that other expansions just allocate
memory. It causes bugs because the stack is also used for intermediate
results such as arithmetic expressions. Such places should disable herefd
for the duration but not all of them do, and I prefer removing the need for
disabling herefd to disabling it everywhere needed.
Here documents larger than 1024 bytes will use a bit more CPU time and
memory.
Additionally this allows a later change to expand here documents in the
current shell environment. (This is faster for small here documents but also
changes behaviour.)
Obtained from: dash
The code to translate the internal representation to text did not know about
various additions to the internal representation since the original ash and
therefore wrote binary stuff to the terminal.
The code is used in the jobs command and similar output.
Note that the output is far from complete and mostly serves for recognition
purposes.
If describing the status of a pipeline, write all elements of the pipeline
and show the status of the last process (which would also end up in $?).
Only write one report per job, not one for every process that exits.
To keep some earlier behaviour, if any process started by the shell in a
foreground job terminates because of a signal, write a message about the
signal (at most one message per job, however).
Also, do not write messages about signals in the wait builtin in
non-interactive shells. Only true foreground jobs now write such messages
(for example, "Terminated").
In r208489, I added code to reap zombies when forking new processes, to
limit the amount of zombies. However, this can lead to marking a job as done
or stopped if it consists of multiple processes and the first process ends
very quickly. Fix this by only checking for zombies before forking the first
process of a job and not marking any jobs without processes as done or
stopped.
The getpgid() call will fail if the first process in the job has already
terminated, resulting in output of "-1".
The pgid of a job is always the pid of the first process in the job and
other code already relies on this.
Make sure all built-in commands are in the subsection named such, except
exp, let and wordexp which are deliberately undocumented. The text said only
built-ins that really need to be a built-in were documented there but in
fact almost all of them were already documented.
* Prefer one CHECKSTRSPACE with multiple USTPUTC to multiple STPUTC.
* Add STPUTS macro (based on function) and use it instead of loops that add
nul-terminated strings to the stack string.
No functional change is intended, but code size is about 1K less on i386.
If getcwd fails, do not treat this as an error, but print a warning and
unset PWD. This is similar to the behaviour when starting the shell in a
directory whose name cannot be determined.
Since is_alpha/is_name/is_in_name were made ASCII-only, this can no longer
happen.
Additionally, the check was wrong because it did not include the new
CTLQUOTEEND.
This was removed in 2001 but I think it is appropriate to add it back:
* I do not want to encourage people to write fragile and non-portable echo
commands by making printf much slower than echo.
* Recent versions of Autoconf use it a lot.
* Almost no software still wants to support systems that do not have
printf(1) at all.
* In many other shells printf is already a builtin.
Side effect: printf is now always the builtin version (which behaves
identically to /usr/bin/printf) and cannot be overridden via PATH (except
via the undocumented %builtin mechanism).
Code size increases about 5K on i386. Embedded folks might want to replace
/usr/bin/printf with a hard link to /usr/bin/alias.
The information in sh(1) about the echo builtin is equivalent, though less
extensive.
The echo(1) man page (bin/echo/echo.1) is different.
Unfortunately, sh's echo builtin and /bin/echo have gone out of sync and
this probably cannot be fixed any more.
Reported by: uqs (list of untouched files)
MFC after: 1 week
In particular, remove the text about ksh-like features, which are usually
taken for granted nowadays. The original Bourne shell is fading away and for
most users our /bin/sh is one of the most minimalistic they know.
Convert the tests to the perl prove format.
Remove obsolete TEST.README (results of an old TEST.sh for some old Unices)
and TEST.csh (old tests without correct values, far less complete than
TEST.sh).
MFC after: 1 week
This moves the function of the noaliases variable into the checkkwd
variable. This way it is properly reset on errors and aliases can be used
normally in the commands for each case (the case labels recognize the
keyword esac but no aliases).
The new code is clearer as well.
Obtained from: dash
I've noticed various terminal emulators that need to obtain a sane
default termios structure use very complex `hacks'. Even though POSIX
doesn't provide any functionality for this, extend our termios API with
cfmakesane(3), which is similar to the commonly supported cfmakeraw(3),
except that it fills the termios structure with sane defaults.
Change all code in our base system to use this function, instead of
depending on <sys/ttydefaults.h> to provide TTYDEF_*.
These do something else in ksh: name=(...) is an array or compound variable
assignment and the others are extended patterns.
This is the last patch of the ones tested in the exp run.
Exp-run done by: pav (with some other sh(1) changes)
Apart from detecting breakage earlier or at all, this also fixes a segfault
in the testsuite. The "handling" of the breakage left an invalid internal
representation in some cases.
Examples:
echo a; do echo b
echo `) echo a`
echo `date; do do do`
Exp-run done by: pav (with some other sh(1) changes)
subevalvar() incorrectly assumed that CTLESC bytes were present iff the
expansion was quoted. However, they are present iff various processing such
as word splitting is to be done later on.
Example:
v=@$e@$e@$e@
y="${v##*"$e"}"
echo "$y"
failed if $e contained the magic CTLESC byte.
Exp-run done by: pav (with some other sh(1) changes)
The code is inspired by NetBSD sh somewhat, but different because we
preserve the old Almquist/Bourne/Korn ability to have an unquoted part in a
quoted ${v+word}. For example, "${v-"*"}" expands to $v as a single field if
v is set, but generates filenames otherwise.
Note that this is the only place where we split text literally from the
script (the similar ${v=word} assigns to v and then expands $v). The parser
must now add additional markers to allow the expansion code to know whether
arbitrary characters in substitutions are quoted.
Example:
for i in ${$+a b c}; do echo $i; done
Exp-run done by: pav (with some other sh(1) changes)
If double-quote state does not match, treat the '}' literally.
This ensures double-quote state remains the same before and after a
${v+-=?...} which helps with expand.c.
It makes things like
${foo+"\${bar}"}
which I have seen in the wild work as expected.
Exp-run done by: pav (with some other sh(1) changes)
This is a syntax error.
POSIX does not say explicitly whether defining a function with the same name
as a special builtin is allowed, but it does say that it is impossible to
call such a function.
A special builtin can still be overridden with an alias.
This commit is part of a set of changes that will ensure that when
something looks like a special builtin to the parser, it is one. (Not the
other way around, as it remains possible to call a special builtin named
by a variable or other substitution.)
Exp-run done by: pav (with some other sh(1) changes)
Add some conservative checks on function names:
- Disallow expansions or quoting characters; these can only be called via
strange control characters
- Disallow '/'; these functions cannot be called anyway, as exec.c assumes
they are pathnames
- Make the CTL* bytes work properly in function names.
These are syntax errors.
POSIX does not require us to support more than names (letters, digits and
underscores, not starting with a digit), but I do not want to restrict it
that much at this time.
Exp-run done by: pav (with some other sh(1) changes)
This is how ksh93 treats ! within a pipeline and makes the ! in
a | ! b | c
negate the exit status of the pipeline, as if it were
a | { ! b | c; }
Side effect: something like
f() ! a
is now a syntax error, because a function definition takes a command,
not a pipeline.
Exp-run done by: pav (with some other sh(1) changes)
For multi-command pipelines,
1. all commands are direct children of the shell (unlike the original
Bourne shell)
2. all commands are executed in a subshell (unlike the real Korn shell)
MFC after: 1 week
immediately written into the stack after the call. Instead let the caller
manage the "space left".
Previously, growstackstr()'s assumption causes problems with STACKSTRNUL()
where we want to be able to turn a stack into a C string, and later
pretend the NUL is not there.
This fixes a bug in STACKSTRNUL() (that grew the stack) where:
1. STADJUST() called after a STACKSTRNUL() results in an improper adjust.
This can be seen in ${var%pattern} and ${var%%pattern} evaluation.
2. Memory leak in STPUTC() called after a STACKSTRNUL().
Reviewed by: jilles
- Use %t to print ptrdiff_t values.
- Cast a ptrdiff_t value explicitly to int for a field width specifier.
While here, sort includes.
Submitted by: Garrett Cooper
frobbing CFLAGS directly. DEBUG_FLAGS is something that can be specified
on the make command line without having to edit the Makefile directly.
Submitted by: Garrett Cooper
Add directory names directly and sort at the end.
Include bsd.arch.inc.mk so we can, in the future, more easily make arch
dependent changes in /bin (unlikely, but is needed for symmetry).
expr(1) should usually not be used as various forms of parameter expansion
and arithmetic expansion replicate most of its functionality in an easier
way.
getopt(1) should not be used at all in new code. Instead, getopts(1) or
entirely manual parsing should be used.
MFC after: 1 week
The three examples are better done using sh(1) itself these days.
The example
expr -- "$a" : ".*"
is incorrect in the general case, as "$a" may be an operator.
MFC after: 2 weeks
This makes it impossible to use locale-specific characters in variable
names.
Names containing locale-specific characters make scripts only work with the
correct locale setting. Also, they did not even work in many practical cases
because multibyte character sets such as utf-8 are not supported.
This also avoids weirdness if LC_CTYPE is changed in the middle of a script.
are too long. Filenames escaping this test are caught later on,
so the bug doesn't cause any breakage.
Document the correct ustar limitations in pax. As I have no access
to the IEEE 1003.2 spec, I can only assume that the limitations
imposed are in fact correct.
Add regression tests for the filename limitations imposed by pax.
MFC after: 3 weeks
This Almquist extension was disabled long ago.
In pathname generation, components starting with '!!' were treated as
containing wildcards, causing unnecessary readdir (which could fail, causing
pathname generation to fail while it should not).
In our implementation and most others, a break or continue in a dot script
can break or continue a loop outside the dot script. This should cause all
further commands in the dot script to be skipped. However, cmdloop() did not
know about this and continued to parse and execute commands from the dot
script.
As described in the man page, a return in a dot script in a function returns
from the function, not only from the dot script. There was a similar issue
as with break and continue. In various other shells, the return appears to
return from the dot script, but POSIX seems not very clear about this.
The buffer for generated pathnames could be too small in some cases. It
happened to be always at least PATH_MAX long, so there was never an overflow
if the resulting pathnames would be usable.
This bug may be abused if a script subjects input from an untrusted source
to pathname generation, which a bad idea anyhow. Most shell scripts do not
work on untrusted data. secteam@ says no advisory is necessary.
PR: bin/148733
Reported by: Changming Sun snnn119 at gmail com
MFC after: 10 days
This makes a difference if there is a command substitution.
To make this work, evalstring() has been changed to set exitstatus to 0 if
no command was executed (the string contained only whitespace).
Example:
eval $(false); echo $?
should print 0.
