Rework the timeout code to use actual time rather than a DELAY() loop and
to use both typical and maximum to allow logging of timeout failures.
Also correct the erase timeout, it is specified in milliseconds not
microseconds like the other timeouts. Do not invoke DELAY() between
status queries as this adds significant latency which in turn reduced
write performance substantially.
Sanity check timeout values from the hardware.
Implement support for buffered writes (only enabled on Intel/Sharp parts
for now). This yields an order of magnitude speedup on the 64MB Intel
StrataFlash parts we use.
When making a copy of the block to modify, also keep a clean copy around
until we are ready to commit the block and use it to avoid unnecessary
erases. In the non-buffer write case, also use it to avoid
unnecessary writes when the block has not been erased. This yields a
significant speedup when doing things like zeroing a block.
Sponsored by: DARPA, AFRL
Reviewed by: imp (previous version)
set to 15 to indicate that the peer did not send a window scale option
with its SYN. Do not send a window scale option in the SYN|ACK reply
in that case.
performance... Use SSE2 instructions for calculating the XTS tweek
factor... Let the compiler do more work and handle register allocation
by using intrinsics, now only the key schedule is in assembly...
Replace .byte hard coded instructions w/ the proper instructions now
that both clang and gcc support them...
On my machine, pulling the code to userland I saw performance go from
~150MB/sec to 2GB/sec in XTS mode. GELI on GNOP saw a more modest
increase of about 3x due to other system overhead (geom and
opencrypto)...
These changes allow almost full disk io rate w/ geli...
Reviewed by: -current, -security
Thanks to: Mike Hamburg for the XTS tweek algorithm
Initialize the request id for requests in xbb_get_resources()
instead of its previous location in xbb_dispatch_io(). This
guarantees that all request types (e.g. BLKIF_OP_FLUSH_DISKCACHE)
have the front-end specified id recorded.
Submitted by: Roger Pau Monné
Sponsored by: Citrix Systems R&D
* Remove non working code related to SHA224.
* Remove support for non-standardised HMAC-IDs using SHA384 and SHA512.
* Prefer SHA256 over SHA1.
* Minor cleanup.
MFC after: 2 weeks
No functional changes.
sys/i386/xen/mp_machdep.c:
Remove extra newlines.
Group externs, forward delarations, local types, and pcpu data.
Wrap at 80 columns.
Use parens in return statements.
Tab indent members of array initializers.
MFC after: 2 weeks
always wait for provider close. Old algorithm was reported to cause NULL
dereference panic on attempt to close provider after softc destruction.
If not global workaroung in GEOM, that could even cause destruction with
requests still in flight.
date: 2010/02/04 14:10:12; author: sthen; state: Exp; lines: +24 -19;
pf_get_sport() picks a random port from the port range specified in a
nat rule. It should check to see if it's in-use (i.e. matches an existing
PF state), if it is, it cycles sequentially through other ports until
it finds a free one. However the check was being done with the state
keys the wrong way round so it was never actually finding the state
to be in-use.
- switch the keys to correct this, avoiding random state collisions
with nat. Fixes PR 6300 and problems reported by robert@ and viq.
- check pf_get_sport() return code in pf_test(); if port allocation
fails the packet should be dropped rather than sent out untranslated.
Help/ok claudio@.
Some additional changes to 1.12:
- We also need to bzero() the key to zero padding, otherwise key
won't match.
- Collapse two if blocks into one with ||, since both conditions
lead to the same processing.
- Only naddr changes in the cycle, so move initialization of other
fields above the cycle.
- s/u_intXX_t/uintXX_t/g
PR: kern/181690
Submitted by: Olivier Cochard-Labbé <olivier cochard.me>
Sponsored by: Nginx, Inc.
sys/x86/xen/hvm.c:
Do not rely on implicit conversion to boolean in expressions
(e.g. use "if (rc != 0)" instead of "if (rc)".
Line continuations for functions are indented an additional
4 spaces.
Insert an empty line if the function has no local variables.
Prefer separate initializtion statements to initialzing
local variables in their declaration.
Braces that are not necessary may be left out.
MFC after: 2 weeks
of relying on the tvtohz() workaround. The latter has been introduced
lately by jhb@ (r254699) in order to have a fix that can be backported
to STABLE.
Reported by: Vitja Makarov <vitja.makarov at gmail dot com>
Reviewed by: jhb (earlier version)
waiting for an RPC reply from the server while holding the mount
point busy (mnt_lockref incremented). This happens because dounmount()
msleep()s waiting for mnt_lockref to become 0, before calling
VFS_UNMOUNT(). This patch adds a new VFS operation called VFS_PURGE(),
which the NFS client implements as purging RPCs in progress. Making
this call before checking mnt_lockref fixes the problem, by ensuring
that the VOP_xxx() calls will fail and unbusy the mount point.
Reported by: sbruno
Reviewed by: kib
MFC after: 2 weeks
bintime_* related functions. This commit completes what was already done
by theraven@ for bintime_shift, and just uses a single underscore instead
of two (which is a style bug according to Bruce). See r251855 for reference.
Reported by: theraven
Discussed with: bde
Reviewed by: bde
functional state. While CTL is much more superior target from all points,
there is no reason why this code should not work.
Tested with ahc(4) as target side HBA.
MFC after: 2 weeks
This is a significant rewrite of much of the previous driver; lots of
misc. cleanup was also performed, and support for a few other minor
features was also added.
Partial support for the EVENT_IDX feature was added a while ago,
but this commit adds an interface for the device driver to hint
how long (in terms of descriptors) the next interrupt should be
delayed.
The first user of this will be used to reduce VirtIO net's Tx
completion interrupts.
