Commit Graph

755 Commits

Author SHA1 Message Date
njl
552da4a9e9 Re-add an acpi attachment for the legacy probe that was inadvertently
removed.
2004-10-15 05:13:25 +00:00
yongari
20da9f17e3 Plug possible memory leak in sound DMA buffer handling. It also
changes return code to ENOMEM in case of allocation failure.

Approved by:	jake (mentor), scottl (co-mentor)
Reviewed by:	truckman, matk
2004-10-15 03:50:04 +00:00
yongari
f8db072728 Limit DMA address space to 1GB since the trident audio cards can't
handle DMA addresses located above 1GB. The LBA(loop begin address)
register which holds DMA base address is 32bits register. But the
MSB 2bits are used for other purposes. This effectivly limits the
DMA address space up to 1GB.

Approved by:	jake (mentor)
Reviewed by:	truckman, matk
2004-10-13 06:04:01 +00:00
yongari
5cef8d8d29 Audio drivers failed to detect failure condition and attempted to
assign DMA address to the wrong address. It can cause system lockup
or other mysterious errors. Since most sound cards requires low DMA
address(BUS_SPACE_MAXADDR_24BIT) sndbuf_alloc() would fail when the
audio driver is loaded after long running of operations.

Approved by:	jake (mentor)
Reviewed by:	truckman, matk
2004-10-13 05:45:16 +00:00
njl
3be284e5bb * Remove the acpi attachment from the es1888. It has an identify method
that conjures up the device node so it isn't true PNP.  Noticed by jhb@.

* Add an attachment for esscontrol since it too uses ISA_PNP_PROBE.

* Move an attachment from snd_mss to snd_pnpmss.  The latter is the real
  PNP user.
2004-10-12 01:56:03 +00:00
njl
d1815dce13 Add acpi attachments for ISA sound drivers. This is needed so they'll
probe and attach when ACPI is enabled.

Submitted by:	takawata (sbc fix)
MFC after:	1 day
2004-10-11 19:52:31 +00:00
ps
5c74b9f0fb Add ICH6 support. 2004-09-28 01:32:58 +00:00
des
bdfb27dfb7 Correct the capitalization of "nVidia". 2004-09-21 13:17:55 +00:00
sanpei
47d07987e2 Add support Nvidia nForce2(audio)
PR:		kern/71317
Submitted by:	Mezz <mezz@freebsd.org>
MFC after:	1 week
2004-09-20 07:19:49 +00:00
sanpei
3c09ffb8d9 Add support nForce3 250 audio
PR:		kern/71726
Submitted by:	FUJIMOTO Kou <fujimoto@j.dendai.ac.jp>
MFC after:	1 week
2004-09-20 05:59:17 +00:00
sobomax
708fc8a4b7 Backout the code which tries to use undocumented way to determine if
fm801 has sound capabilities or not. Unfortunately this code doesn't
work as expected.

Submitted by:	many
MFC after:	3 days
2004-09-15 23:47:17 +00:00
truckman
e622ceb592 Change sb_lock() calls to sbc_lockassert() and remove the sb_unlock()
calls in sb_cmd2() and sb_getmixer().  The lock has already be grabbed
before these functions are called.

This is a RELENG_5 candidate.

PR:		71189
Submitted by:	stephane
MFC after:	3 days
2004-09-12 18:19:42 +00:00
truckman
932b912ae2 Convert sndstat_lock from a mutex to an sx lock. sndstat_read()
holds sndstat_lock across a call to uiomove(), which is not legal
to do with a  mutex because of the possibility that the data transfer
could sleep because of a page fault.  It is not possible to just
unlock the mutex for the uiomove() call without introducing another
locking mechanism to prevent the body of sndstat_read() from being
re-entered.  Converting sndstat_lock to an sx lock is the least
complicated change.

This is a candidate for RELENG_5.

LOR:		030
MFC after:	4 days
2004-09-10 09:37:06 +00:00
green
f13126589a The new contigmalloc code is exposing a lot of misuses of busdma memory
allocation. Notably, in this case, the driver tries to allocate several
pieces of memory and then fails if the pieces allocated after the first
do not come after it physically, and within a specific range (8MB I
believe).  Of course, this could just as easily fail for any number of
reasons, but it almost always fails now that contiguous allocations start
at the end of possible specified memory locations rather than the beginning.

Allocate all the possibly-needed memory up front, even though it's a waste,
to get around this.  The least bogus solution would be to take the physical
address from the first allocation and create a new tag that specified that
further allocations must follow it within that 8MB window, then use that
when allocating new channels, but that's left for anyone else that really
feels like doing it.

Tested by:	Erwin Lansing <erwin@lansing.dk>
2004-08-22 18:57:40 +00:00
obrien
1e17828b11 Remove rev 1.50. 2004-07-24 15:30:23 +00:00
tanimura
217e78b745 Rename the sound device drivers:
- `sound'
  The generic sound driver, always required.

- `snd_*'
  Device-dependent drivers, named after the sound module names.
  Configure accordingly to your hardware.

In addition, rename the `snd_pcm' module to `sound' in order to sync
with the driver names.

Suggested by:	cg
2004-07-16 04:00:08 +00:00
phk
5c95d686a1 Do a pass over all modules in the kernel and make them return EOPNOTSUPP
for unknown events.

A number of modules return EINVAL in this instance, and I have left
those alone for now and instead taught MOD_QUIESCE to accept this
as "didn't do anything".
2004-07-15 08:26:07 +00:00
marcel
153c72172f Remove DDB. The one user of this macro has been changed to use BVDDB.
Yes, DDB is unrelated to the debugger with the same acronym. Hence,
the change.
2004-07-10 21:13:28 +00:00
marcel
d6d823aef5 s/DDB/BVDDB/g
Note that DDB is unrelated to the debugger with the same acronym.
2004-07-10 21:12:27 +00:00
bms
b9a0ef169c Check the return value of bus_dmamem_alloc() correctly.
Submitted by:	Darron Broad (with cleanups)
2004-07-04 18:40:36 +00:00
netchild
14b36b7b44 Implement SNDCTL_DSP_SETDUPLEX. This may fix sound apps which want to
use full duplex mode.

Approved by:	matk
2004-07-02 15:31:44 +00:00
josef
1317204d7b Fix uninitialized variable, that breaks the build.
Approved by: hmp
Reviewed by: chris
Pointy hat to: josef (for ignoring warning)
2004-06-25 16:34:33 +00:00
josef
ed1e209050 Change the possibility to configure pcm(4) via boot/loader.conf
to use boot/device.hints now

As discussed on cvs-src@

Reviewed by:	Hiten Pandya <hmp@backplane.com>
2004-06-24 17:41:20 +00:00
josef
95e075acdf Enable pcm to read kenv variables to set default values for
mixer channels.

e.g.: pcm0.line=0

to muten input line per default.

Approved by:    cg
Reviewed by:    le, stefanf
Requested by:   Eugene Grosbein <eugen@grosbein.pp.ru> (implicitly)
PR:             kern/63771
2004-06-20 15:38:11 +00:00
phk
40dd98a3bd Second half of the dev_t cleanup.
The big lines are:
	NODEV -> NULL
	NOUDEV -> NODEV
	udev_t -> dev_t
	udev2dev() -> findcdev()

Various minor adjustments including handling of userland access to kernel
space struct cdev etc.
2004-06-17 17:16:53 +00:00
phk
dfd1f7fd50 Do the dreaded s/dev_t/struct cdev */
Bump __FreeBSD_version accordingly.
2004-06-16 09:47:26 +00:00
josef
0cfbda60d5 Improve mapping of relative to absolute volume.
I added bounds checking to the patch and cg improved
the formular.

Submitted by:	Andriy Gapon <avg@icyb.net.ua>
PR:		kern/65485
Approved by:	cg
Reviewed by:	imp, rwatson, le
2004-06-14 15:01:16 +00:00
obrien
79f173407b Add PCI identifier for Dell modified SBLive! card
Submitted by:	Joseph Dunn <joseph@magnesium.net>
2004-06-13 22:12:02 +00:00
truckman
c39a9d561b Nuke a cryptic and useless diagnostic printf(). 2004-06-07 12:25:14 +00:00
mux
c4ab6e1a19 Make the emu10k1 pcm driver INTR_MPSAFE. The locking is modeled
exactly as done in the cmi driver.  I am quite confident this is
safe since I'm runing this for more than two weeks now, on an SMP
box.  A few people tested this patch for me successfully as well.
2004-06-04 16:42:33 +00:00
tanimura
3d7b42f638 Axe the old midi drivers and framework. matk has developed a new
module-friendly midi subsystem to be merged soon.
2004-06-01 06:22:59 +00:00
takawata
d40a25cb50 Devclass have to be shared with same 'pcm' devclass, or
unit management will corrupt.
2004-05-31 11:38:46 +00:00
matk
1e98754d04 Add PCI ID for via 8237.
Submitted by:	Josh Elsasser <jre@vineyard.net>
Approved by:	tanimura (mentor)
PR:		kern/61730
2004-05-26 22:05:50 +00:00
truckman
96d5cf544a Remove extraneous spaces. 2004-05-13 11:33:44 +00:00
truckman
305fdebeb3 Implement sbc_lockassert() and sb_lockassert() functions to allow
proper locking to be checked at runtime.

Remove sb_lock() and sb_unlock() calls from sb_reset_dsp() because the
latter is called from sb_setup() with the lock already held.  Add a
call to sb_lockassert().

Surround the call to sb_reset_dsp() in sb16_attach() with sb_lock()
and sb_unlock() calls.

Tested by:	Bartek Marcinkiewicz <junior AT p233.if.pwr.wroc.pl>
2004-05-13 11:32:54 +00:00
sanpei
40227f903a Add support CS4294
PR:		kern/66280
Submitted by:	Christian Brueffer <chris@unixpages.org>
2004-05-08 03:41:40 +00:00
green
15cb95d464 Don't do malloc(M_WAITOK) for sound buffers while locks are held. 2004-04-29 02:51:59 +00:00
green
5ec8677925 This driver certainly works fine turning INTR_MPSAFE back on. For those
of you with other cards, please do review and test the drivers for
MP-safety and disable Giant in the interrupt routines when you are
sure of proper functionality.
2004-04-21 04:23:51 +00:00
green
4159ce22be The newpcm headers currently #define away INTR_MPSAFE and INTR_TYPE_AV
because they bogusly check for defined(INTR_MPSAFE) -- something which
never was a #define.  Correct the definitions.

This make INTR_TYPE_AV finally get used instead of the lower-priority
INTR_TYPE_TTY, so it's quite possible some improvement will be had
on sound driver performance.  It would also make all the drivers
marked INTR_MPSAFE actually run without Giant (which does seem to
work for me), but:
	INTR_MPSAFE HAS BEEN REMOVED FROM EVERY SOUND DRIVER!
It needs to be re-added on a case-by-case basis since there is no one
who will vouch for which sound drivers, if any, willy actually operate
correctly without Giant, since there hasn't been testing because of
this bug disabling INTR_MPSAFE.

Found by:	"Yuriy Tsibizov" <Yuriy.Tsibizov@gfk.ru>
2004-04-14 14:57:49 +00:00
matk
bc542b543d By default, ich4 has NAMBAR and NABMBAR i/o spaces as
read-only.  Need to enable "legacy support", by poking
into pci config space.  (comment from the patch)

Submited by:	Autrijus Tang <autrijus@autrijus.org>
Approved by:	tanimura (mentor)
2004-03-31 00:11:24 +00:00
marcel
141d659a4f Actually program the list of recording devices in sv_mix_setrecsrc().
This change has not been tested.

This change was triggered by a gcc(1) warning on ia64 at -O2.  The
variable v was not used after being computed, which resulted in enough
dead code elimination (DCE) to confuse the compiler and emit a bogus
warning about the use of the variable i without prior definition. The
variable i is the loop variable.

Submitted by: des
Responsibility: marcel
2004-03-20 04:38:21 +00:00
njl
05a1f56fc9 Convert callers to the new bus_alloc_resource_any(9) API.
Submitted by:	Mark Santcroos <marks@ripe.net>
Reviewed by:	imp, dfr, bde
2004-03-17 17:50:55 +00:00
matk
a8492f84bf Augment /dev/sndstat with the module names, if applicable.
Approved by:	  tanimura (mentor)
2004-03-06 15:52:42 +00:00
truckman
0810203f40 Create a new mutex type for virtual channels. This allows us to get
rid of the MTX_DUPOK flag on channel mutexes, which allows witness to
do a better job of lock order checking.  Nuke snd_chnmtxcreate() since
it is no longer needed.

Tested by:	matk
2004-02-28 19:47:02 +00:00
truckman
9389696e89 Lock channels only as necessary in dsp_ioctl(), and only lock one
channel at a time unless it is actually necessary to lock both.
This avoids problems with lock order reversal and malloc() calls
with a mutex held when lower level code unlocks a channel, calls malloc(),
and relocks the channel.  This also avoids the cost of some  unnecessary
locking and unlocking.

Tested by:	matk
2004-02-28 19:42:48 +00:00
phk
39fb4aef3d Device megapatch 5/6:
Remove the unused second argument from udev2dev().

Convert all remaining users of makedev() to use udev2dev().  The
semantic difference is that udev2dev() will only locate a pre-existing
dev_t, it will not line makedev() create a new one.

Apart from the tiny well controlled windown in D_PSEUDO drivers,
there should no longer be any "anonymous" dev_t's in the system
now, only dev_t's created with make_dev() and make_dev_alias()
2004-02-21 21:32:15 +00:00
phk
ad925439e0 Device megapatch 4/6:
Introduce d_version field in struct cdevsw, this must always be
initialized to D_VERSION.

Flip sense of D_NOGIANT flag to D_NEEDGIANT, this involves removing
four D_NOGIANT flags and adding 145 D_NEEDGIANT flags.
2004-02-21 21:10:55 +00:00
matk
6562bf3d42 Fix a glitch in my last commit and revert to using selwakeuppri
Noticed by:	tanimura
Noticed by:	truckman
2004-02-20 01:24:57 +00:00
matk
c8130a438c Fix a long-standing bug where select on vchans doesn't work
(never wake up) by iterating over them when they exist.

Approved by:	tanimura (mentor)
2004-02-19 01:07:15 +00:00
mr
f2e284bf9e Add dependency to snd_via8233 2004-01-29 14:11:03 +00:00