fact that Jenkins hardcodes image sizes to 2GB with the FreeBSD_HEAD
job
This is to stop the unnecessary failure emails because we've gone
over the 2GB limit
MFC after: 1 week
X-MFC with: r295341
Sponsored by: EMC / Isilon Storage Division
With this change, it's possible to redefine rc_conf_files (e.g.,
sysrc rc_conf_files+=/etc/rc.conf.other) and have the boot process
pick up settings in extra files. The sysrc(8) tool can be used to
query/enumerate/find/manage extra files configured in this manner.
Relnotes: yes
For cases where these utilities aren't installed, the tests would fail today
in a non-intuitive manner on sub-testcase #3 in each of the test scripts
MFC after: 1 week
Reviewed by: markj
Sponsored by: EMC / Isilon Storage Division
This would have printed an unknown RISC-V relocation type as a SPARC
relocation.
CID: 1331398
Obtained from: ELF Tool Chain r3283
Sponsored by: The FreeBSD Foundation
Typically <foo>list is used for a structure that holds a list head in
FreeBSD, not for members of a list. As such, rename 'struct aiocblist'
to 'struct kaiocb' (the kernel version of 'struct aiocb').
While here, use more consistent variable names for AIO control blocks:
- Use 'job' instead of 'aiocbe', 'cb', 'cbe', or 'iocb' for kernel job
objects.
- Use 'jobn' instead of 'cbn' for use with TAILQ_FOREACH_SAFE().
- Use 'sjob' and 'sjobn' instead of 'scb' and 'scbn' for fsync jobs.
- Use 'ujob' instead of 'aiocbp', 'job', 'uaiocb', or 'uuaiocb' to hold
a user pointer to a 'struct aiocb'.
- Use 'ujobp' instead of 'aiocbp' for a user pointer to a 'struct aiocb *'.
Reviewed by: kib
Sponsored by: Chelsio Communications
Differential Revision: https://reviews.freebsd.org/D5125
Major changes:
- Add i219/i219(2) hardware support. (Found on Skylake generation and newer
chipsets.)
- Further to the last Skylake support diff, this one also includes support for
the Lewisburg chipset (i219(3)).
- Add a workaround to an igb hardware errata.
All 1G server products need to have IPv6 extension header parsing turned off.
This should be listed in the specification updates for current 1G server
products, e.g. for i350 it's errata #37 in this document:
http://www.intel.com/content/dam/www/public/us/en/documents/specification-updates/ethernet-controller-i350-spec-update.pdf
- Avoton (i354) PHY errata workaround added
And a bunch of minor fixes, as well as #defines for things that the current
em(4)/igb(4) drivers don't implement.
Differential Revision: https://reviews.freebsd.org/D3162
Reviewed by: sbruno, marius, gnn
Approved by: gnn
MFC after: 2 weeks
Sponsored by: Intel Corporation
Fix EFI boot support when presented with multiple valid boot partitions
across multiple devices.
It now prefers to boot from partitions that are present on the underlying
device that the boot1 image was loaded from. This means that it will boot
from the partitions on device the user chose from EFI boot menu in
preference to those on other devices.
Also fixed is the recovery from a failed attempt to boot, from a seemingly
valid partition, by continuing to trying all other available partitions
no matter what the error.
boot1 now use * to signify a partition what was accepted from the preferred
device and + otherwise.
Finally some error messages where improved and DPRINTF's with slowed boot
to aid debugging.
ZFS will still be preferred over UFS when both are available on the boot
device.
Reviewed by: imp
MFC after: 1 week
Sponsored by: Multiplay
Differential Revision: https://reviews.freebsd.org/D5108
We will eventually convert them to use busdma.
Submitted by: Jun Su <junsu microsoft com>
Reviewed by: adrian, sephe, Dexuan Cui <decui microsoft com>
Approved by: adrian (mentor)
MFC after: 1 week
Sponsored by: Microsoft OSTC
Differential Revision: https://reviews.freebsd.org/D5087
And convert rndis non-hot path spinlock to mutex.
Submitted by: Jun Su <junsu microsoft com>
Reviewed by: adrian, sephe
Approved by: adrian (mentor)
MFC after: 1 week
Sponsored by: Microsoft OSTC
Differential Revision: https://reviews.freebsd.org/D5081
HyperV code was ported from Linux. There is an implementation of
work queue called hv_work_queue. In FreeBSD, taskqueue could be
used for the same purpose. Convert all the consumer of hv_work_queue
to use taskqueue, and remove work queue implementation.
Submitted by: Jun Su <junsu microsoft com>
Reviewed by: adrian, Hongjiang Zhang <honzhan microsoft com>
Approved by: adrian (mentor)
MFC after: 1 week
Sponsored by: Microsoft OSTC
Differential Revision: https://reviews.freebsd.org/D4963
It is off by default. This eases more experiment on hn(4).
Reviewed by: adrian, Hongjiang Zhang <honzhan microsoft com>
Approved by: adrian (mentor)
MFC after: 1 week
Sponsored by: Microsoft OSTC
Differential Revision: https://reviews.freebsd.org/D5175
This significantly increases LRO aggregation ratio when there are
large amount of connections (improves reception performance a lot).
Reviewed by: adrian
Approved by: adrian (mentor)
MFC after: 1 week
Sponsored by: Microsoft OSTC
Differential Revision: https://reviews.freebsd.org/D5167
hn(4) only has one RX ring currently, so default 8 LRO entries
are too small.
Reviewed by: adrian
Approved by: adrian (mentor)
MFC after: 1 week
Sponsored by: Microsoft OSTC
Differential Revision: https://reviews.freebsd.org/D5166
We lost half of the chimney sending space, because we mis-used
ffs() on a 64 bits mask, where ffsl() should be used.
While I'm here:
- Use system atomic operation instead.
- Stringent chimney sending index assertion.
Reviewed by: adrian
Approved by: adrian (mentor)
MFC after: 1 week
Sponsored by: Microsoft OSTC
Differential Revision: https://reviews.freebsd.org/D5159
It will be shared w/ upcoming ifnet.if_transmit implementaion.
No functional changes.
Reviewed by: adrian
Approved by: adrian (mentor)
MFC after: 1 week
Sponsored by: Microsoft OSTC
Differential Revision: https://reviews.freebsd.org/D5158
So that:
- TCP/IP stack will not do unnecessary IP header checksum for TSO
packets.
- Reduce guest load for non-TSO IP packets.
Reviewed by: adrian
Approved by: adrian (mentor)
MFC after: 1 week
Sponsored by: Microsoft OSTC
Differential Revision: https://reviews.freebsd.org/D5099
- For non-TSO offloading, we don't need to access mbuf to know
which csum offloading is requested, we can just use the
CSUM_{IP,TCP,UDP} in the csum_flags.
- For TSO offloading, we still can depend on CSUM_{TSO4,TSO6}
in the csum_flags to tell whether the TSO packet is an IPv4
TSO packet or an IPv6 TSO packet.
This streamlines csum offloading handling (remove the two goto)
and allows us the nuke the unnecessary get_transport_proto_type().
Reviewed by: adrian, Hongjiang Zhang <honzhan microsoft com>
Approved by: adrian (mentor)
MFC after: 1 week
Sponsored by: Microsoft OSTC
Differential Revision: https://reviews.freebsd.org/D5098
- Record csum features in softc, so we don't need to duplicate the
logic from attach path to ioctl path.
- Protect if_capenable and if_hwassist changes by main lock.
- Prefer turn on/off bits in if_hwassist explicitly instead of using
XOR.
Reviewed by: adrian, Hongjiang Zhang <honzhan microsoft com>
Approved by: adrian (mentor)
MFC after: 1 week
Sponsored by: Microsoft OSTC
Differential Revision: https://reviews.freebsd.org/D5085
a mips big-endian board.
This is (hopefully! ish!) a temporary change until a slightly better way
can be found to express this without a config option.
Tested:
* BUFFALO WZR-HP-G300NH 1stGen (by submitter)
Submitted by: Mori Hiroki <yamori813@yahoo.co.jp>
with interpreter name exactly matching one wanted by the binary. If
no such brand exists, return first brand which accepted the binary by
note.
The change fixes a regression after r292749, where e.g. our two ia32
compat brands, ia32_brand_info and ia32_brand_oinfo, only differ by
the interpeter path and binary matches to a brand by linkage order.
Then old binaries which require /usr/libexec/ld-elf.so.1 but matched
against ia32_brand_info with interp_path /libexec/ld-elf.so.1, were
considered requiring non-standard interpreter name, and magic to force
ld-elf32.so.1 did not happen.
Note that it might make sense to apply the same selection of brands
for other matching criteria, SCO EI_OSABI and 3.x string.
Reported and tested by: dwmalone
Sponsored by: The FreeBSD Foundation
MFC after: 3 days
Add #defines for ATA_WRITE_UNCORRECTABLE48 and its features. Update the
decoding in ATACAM to recognize the new values. Also improve command
decoding for a few other commands (SMART, NOP, SET_FEATURES). Bring the
decoding in ata(4) up to parity with ATACAM.
Reviewed by: mav, imp
MFC after: 1 month
Sponsored by: Panasas, Inc.
Differential Revision: https://reviews.freebsd.org/D5181
also for 82598, which doesn't support it.
The legacy code has a check for it, which was missed when the code for dealing with
CSUM_IP6_* was added. Add the same check for FreeBSD 10 and higher.
Differential Revision: https://reviews.freebsd.org/D5192
ABI of struct fpreg. The FPU emulator operates on the "raw" FPU state
stored in the pcb rather than the "cooked" fpreg state used for ptrace()
and cores.
Reported by: bz
16-byte value. With this the hardware will check if a memory access uses
an incorrectly aligned stack pointer as the base address.
Sponsored by: ABT Systems Ltd
which return -1 as well as on tier 1 archs. Remove block_userspace_access
used only in these implementations.
(1) These functions may be called in interrupt context and pcb_onfault
can be already set in this time. Thus, prior pcb_onfault must be saved
and restored afterwards.
(2) The check that an abort came either from nested interrupt or while
in critical section or holding not sleepable lock must be avoided for
this case.
These functions are called only for profiling reason, so there will be
only small gain by making the code more complex.
export_args on mount update, bzero() is consistent with
vfs_oexport_conv().
Make the code structure more explicit by using switch.
Return EINVAL if export option layout (deduced from size) is unknown.
Based on the submission by: bde
Sponsored by: The FreeBSD Foundation
