Commit Graph

2750 Commits

Author SHA1 Message Date
adrian
aaa40bc84a Allow IEEE80211_SUPPORT_SUPERG to be defined _and_ have a working wlan
module.
2013-02-02 02:00:29 +00:00
hselasky
590506ceba Include SMSC driver into default kernel build. 2013-02-01 07:19:19 +00:00
neel
57c1c0e0f9 Delete the "blackhole" driver - it is not needed anymore.
The "blackhole" driver was used in conjunction with bhyve to sequester
pci devices intended for passthru until vmm.ko was loaded. This was
useful at one point because vmm.ko could not be loaded at boot time.

The same functionality can now be achieved by loading vmm.ko via the
loader along with the kernel.

Discussed with:	grehan
Obtained from:	NetApp
2013-02-01 06:40:53 +00:00
pfg
245e35ae97 Clean some 'svn:executable' properties in the tree.
Submitted by:	Christoph Mallon
MFC after:	3 days
2013-01-26 22:08:21 +00:00
delphij
24e0e32487 - Don't include date and time the driver is built, this is useful for
generating binary diffs.
 - Constify a few strings used in the driver.
 - Style changes to make the driver compile with default clang settings.

Approved by:	HighPoint Technologies
MFC after:	3 days
2013-01-22 05:41:34 +00:00
neel
d20dd131b5 IFC @ r245509 2013-01-17 07:04:37 +00:00
np
1e50e232a2 cxgbe(4): Updates to the hardware L2 table management code.
- Add full support for IPv6 addresses.

- Read the size of the L2 table during attach.  Do not assume that PCIe
  physical function 4 of the card has all of the table to itself.

- Use FNV instead of Jenkins to hash L3 addresses and drop the private
  copy of jhash.h from the driver.

MFC after:	1 week
2013-01-14 20:36:22 +00:00
neel
38ad3ee536 IFC @ r244983. 2013-01-04 19:28:32 +00:00
adrian
8445fc8dbf Link if_ath_spectral.c into the build. 2013-01-02 04:00:54 +00:00
adrian
def5e4786f Add missing update to link ar5416_spectral.c into the build. 2013-01-02 01:24:36 +00:00
neel
d8091074f2 IFC @r243836 2012-12-04 04:37:42 +00:00
adrian
11f362bbec Add the btcoex code into the module compilation. 2012-12-03 23:38:08 +00:00
adrian
3464751631 Include if_ath_alq.c, which only gets actually compiled if ATH_DEBUG_ALQ
is enabled.
2012-12-03 23:36:03 +00:00
uqs
5cc79f651e Fix make depend. 2012-12-02 22:18:01 +00:00
jkim
3fd80a8266 Merge ACPICA 20121114. 2012-11-20 21:01:59 +00:00
kib
511a29a5c4 Fix module build after r243245. 2012-11-20 15:23:22 +00:00
ae
37d897b509 Connect ip6_mroute kernel module to the build.
MFC after:	1 week
2012-11-20 14:11:27 +00:00
neel
0e18e1b9de IFC @ r243164 2012-11-17 02:55:47 +00:00
eadler
60660be432 Finish removing unneeded header from agp: opt_bus.h
Approved by:	cperciva
MFC after:	1 week
2012-11-15 20:25:09 +00:00
neel
1a164db277 IFC @ r242940 2012-11-13 07:39:05 +00:00
dim
45f8cc9a6c Redo r242842, now actually fixing the warnings, as follows:
- In sys/ofed/drivers/infiniband/core/cma.c, an enum struct member is
  interpreted as an int, so cast it to an int.
- In sys/ofed/drivers/infiniband/core/ud_header.c, initialize the
  packet_length variable in ib_ud_header_init(), to prevent undefined
  behaviour.
- In sys/ofed/drivers/infiniband/ulp/sdp/sdp_rx.c, call rdma_notify()
  with the correct enum type and value.
- In sys/ofed/include/linux/pci.h, change the PCI_DEVICE and PCI_VDEVICE
  macros to use C99 struct initializers, so additional members can be
  overridden.

Reviewed by:	delphij, Garrett Cooper <yanegomi@gmail.com>
MFC after:	1 week
2012-11-12 22:01:29 +00:00
neel
bc4be3dff1 IFC @ r242684 2012-11-11 03:26:14 +00:00
delphij
078e4805d0 Attempt toward a buildable universe by silenting a few warnings for OFED. 2012-11-10 00:32:47 +00:00
kevlo
16a9f24ab1 Use .PATH instead of VPATH.
Reviewed by:	gnn,rwatson
2012-11-08 01:35:02 +00:00
jhibbits
99d6a5644c Implement DTrace for PowerPC. This includes both 32-bit and 64-bit.
There is one known issue:  Some probes will display an error message along the
lines of:  "Invalid address (0)"

I tested this with both a simple dtrace probe and dtruss on a few different
binaries on 32-bit.  I only compiled 64-bit, did not run it, but I don't expect
problems without the modules loaded.  Volunteers are welcome.

MFC after:	1 month
2012-11-07 23:45:09 +00:00
neel
9631d598cc Corral all the host state associated with the virtual machine into its own file.
This state is independent of the type of hardware assist used so there is
really no need for it to be in Intel-specific code.

Obtained from:	NetApp
2012-10-29 01:51:24 +00:00
nwhitehorn
01aa9b233e Extend dim's hack from r228978: not only clang but gcc on non-x86 platforms
warns about unused variables in this code, so always add -Wno-unused to
the warning flags. Why gcc on x86 *doesn't* warn about this, I will never
know. The code itself should probably be fixed at some point.
2012-10-28 02:15:35 +00:00
nwhitehorn
bd69f4b8ac Don't try to build Linux compatibility stuff on platforms without
COMPAT_LINUX.
2012-10-27 23:14:37 +00:00
nwhitehorn
c04c652a9e drm(4) works just fine on PowerPC, so connect it to the build.
MFC after:	2 weeks
2012-10-27 16:07:38 +00:00
eadler
90e13cd2eb Finish migration of MAINTAINER entries
Approved by:	cperciva
MFC after:	3 days
2012-10-22 02:12:11 +00:00
attilio
ff4947736d It seems that it is preferable to keep support for glabel also for
filesystems that we don't support natively.
Revert part of r241636 to do so.

This patch is not targeted for MFC.

Requested by:	gleb, jhb
2012-10-18 22:18:11 +00:00
attilio
65d8b7120d Disconnect non-MPSAFE SMBFS from the build in preparation for dropping
GIANT from VFS. In addition, disconnect also netsmb, which is a base
requirement for SMBFS.

In the while SMBFS regular users can use FUSE interface and smbnetfs
port to work with their SMBFS partitions.

Also, there are ongoing efforts by vendor to support in-kernel smbfs,
so there are good chances that it will get relinked once properly locked.

This is not targeted for MFC.
2012-10-18 12:04:56 +00:00
attilio
85c1a64cec Disconnect non-MPSAFE NTFS from the build in preparation for dropping
GIANT from VFS. This code is particulary broken and fragile and other
in-kernel implementations around, found in other operating systems,
don't really seem clean and solid enough to be imported at all.
If someone wants to reconsider in-kernel NTFS implementation for
inclusion again, a fair effort for completely fixing and cleaning it
up is expected.

In the while NTFS regular users can use FUSE interface and ntfs-3g
port to work with their NTFS partitions.

This is not targeted for MFC.
2012-10-17 11:30:00 +00:00
attilio
3f4806915e Disconnect non-MPSAFE NWFS from the build in preparation for dropping
GIANT from VFS. In addition, disconnect also netncp, which is a base
requirement for NWFS.

In the possibility of a future maintenance of the code and later
readd to the FreeBSD base, maybe we should think about a better location
for netncp. I'm not entirely sure the / top location is actually right,
however I will let network people to comment on that more specifically.

This is not targeted for MFC.
2012-10-17 11:16:17 +00:00
attilio
745884b065 Disconnect non-MPSAFE CODAFS from the build in preparation for dropping
GIANT from VFS.

This is not targeted for MFC.
2012-10-16 10:09:21 +00:00
attilio
7dc3733076 Disconnect non-MPSAFE XFS from the build in preparation for dropping
GIANT from VFS.

This is not targeted for MFC.
2012-10-16 10:04:00 +00:00
attilio
efcca33ac5 Disconnect non-MPSAFE PORTALFS from the build in preparation for dropping
GIANT from VFS.

This is not targeted for MFC.
2012-10-16 09:59:10 +00:00
gonzo
36548e3e1a Split sdhci driver in two parts: sdhci and sdhci_pci.
sdchi encapsulates a generic SD Host Controller logic that relies on
actual hardware driver for register access.

sdhci_pci implements driver for PCI SDHC controllers using new SDHCI
interface

No kernel config modifications are required, but if you load sdhc
as a module you must switch to sdhci_pci instead.
2012-10-16 01:10:43 +00:00
attilio
af2d834e29 Import a FreeBSD port of the FUSE Linux module.
This has been developed during 2 summer of code mandates and being revived
by gnn recently.
The functionality in this commit mirrors entirely content of fusefs-kmod
port, which doesn't need to be installed anymore for -CURRENT setups.

In order to get some sparse technical notes, please refer to:
http://lists.freebsd.org/pipermail/freebsd-fs/2012-March/013876.html

or to the project branch:
svn://svn.freebsd.org/base/projects/fuse/

which also contains granular history of changes happened during port
refinements. This commit does not came from the branch reintegration
itself because it seems svn is not behaving properly for this functionaly
at the moment.

Partly Sponsored by:		Google, Summer of Code program 2005, 2011
Originally submitted by:	ilya, Csaba Henk <csaba-ml AT creo DOT hu >
In collabouration with:		pho
Tested by:			flo, gnn, Gustau Perez,
				Kevin Oberman <rkoberman AT gmail DOT com>
MFC after:			2 months
2012-10-13 23:54:26 +00:00
grehan
789936ed16 Virtio SCSI driver
Submitted by:	Bryan Venteicher  bryanv at daemoninthecloset dot org
Reviewed by:	grehan
2012-10-11 23:41:18 +00:00
obrien
ea2e90dbb4 Restrict the module to varied environments. 2012-10-08 14:08:13 +00:00
neel
bc269b51af Add support for trapping MMIO writes to local apic registers and emulating them.
The default behavior is still to present the local apic to the guest in the
x2apic mode.
2012-09-25 22:31:35 +00:00
pjd
618888b019 Add TRIM support.
The code builds a map of regions that were freed. On every write the
code consults the map and eventually removes ranges that were freed
before, but are now overwritten.

Freed blocks are not TRIMed immediately. There is a tunable that defines
how many txg we should wait with TRIMming freed blocks (64 by default).

There is a low priority thread that TRIMs ranges when the time comes.
During TRIM we keep in-flight ranges on a list to detect colliding
writes - we have to delay writes that collide with in-flight TRIMs in
case something will be reordered and write will reached the disk before
the TRIM. We don't have to do the same for in-flight writes, as
colliding writes just remove ranges to TRIM.

Sponsored by:	multiplay.co.uk

This work includes some important fixes and some improvements obtained
from the zfsonlinux project, including TRIMming entire vdevs on pool
create/add/attach and on pool import for spare and cache vdevs.

Obtained from:	zfsonlinux
Submitted by:	Etienne Dechamps <etienne.dechamps@ovh.net>
2012-09-23 19:40:58 +00:00
jimharris
1a22bd7a4f Add nvme(4) and nvd(4) Makefiles to the tree.
Noticed by:	pluknet
Pointy-hat to:  jimharris
2012-09-17 19:58:02 +00:00
jimharris
802d10fdbc Integrate nvme(4) and nvd(4) into the amd64 and i386 builds.
Sponsored by:	Intel
2012-09-17 19:26:33 +00:00
glebius
0ccf4838d7 o Create directory sys/netpfil, where all packet filters should
reside, and move there ipfw(4) and pf(4).

o Move most modified parts of pf out of contrib.

Actual movements:

sys/contrib/pf/net/*.c		-> sys/netpfil/pf/
sys/contrib/pf/net/*.h		-> sys/net/
contrib/pf/pfctl/*.c		-> sbin/pfctl
contrib/pf/pfctl/*.h		-> sbin/pfctl
contrib/pf/pfctl/pfctl.8	-> sbin/pfctl
contrib/pf/pfctl/*.4		-> share/man/man4
contrib/pf/pfctl/*.5		-> share/man/man5

sys/netinet/ipfw		-> sys/netpfil/ipfw

The arguable movement is pf/net/*.h -> sys/net. There are
future plans to refactor pf includes, so I decided not to
break things twice.

Not modified bits of pf left in contrib: authpf, ftp-proxy,
tftp-proxy, pflogd.

The ipfw(4) movement is planned to be merged to stable/9,
to make head and stable match.

Discussed with:		bz, luigi
2012-09-14 11:51:49 +00:00
np
17d9c6b4b5 Update interface to firmware 1.6.2 and include the firmware in the driver.
Obtained from:	Chelsio
MFC after:	1 week
2012-09-13 06:32:52 +00:00
jimharris
3cc562d0f7 Remove some trailing whitespace. 2012-09-12 19:36:54 +00:00
gnn
cea279bc11 Remove scsi_low_pisa.c from the module Makefile to keep in line
with r240325.
2012-09-10 21:57:40 +00:00
glebius
5190d38ee3 Merge the projects/pf/head branch, that was worked on for last six months,
into head. The most significant achievements in the new code:

 o Fine grained locking, thus much better performance.
 o Fixes to many problems in pf, that were specific to FreeBSD port.

New code doesn't have that many ifdefs and much less OpenBSDisms, thus
is more attractive to our developers.

  Those interested in details, can browse through SVN log of the
projects/pf/head branch. And for reference, here is exact list of
revisions merged:

r232043, r232044, r232062, r232148, r232149, r232150, r232298, r232330,
r232332, r232340, r232386, r232390, r232391, r232605, r232655, r232656,
r232661, r232662, r232663, r232664, r232673, r232691, r233309, r233782,
r233829, r233830, r233834, r233835, r233836, r233865, r233866, r233868,
r233873, r234056, r234096, r234100, r234108, r234175, r234187, r234223,
r234271, r234272, r234282, r234307, r234309, r234382, r234384, r234456,
r234486, r234606, r234640, r234641, r234642, r234644, r234651, r235505,
r235506, r235535, r235605, r235606, r235826, r235991, r235993, r236168,
r236173, r236179, r236180, r236181, r236186, r236223, r236227, r236230,
r236252, r236254, r236298, r236299, r236300, r236301, r236397, r236398,
r236399, r236499, r236512, r236513, r236525, r236526, r236545, r236548,
r236553, r236554, r236556, r236557, r236561, r236570, r236630, r236672,
r236673, r236679, r236706, r236710, r236718, r237154, r237155, r237169,
r237314, r237363, r237364, r237368, r237369, r237376, r237440, r237442,
r237751, r237783, r237784, r237785, r237788, r237791, r238421, r238522,
r238523, r238524, r238525, r239173, r239186, r239644, r239652, r239661,
r239773, r240125, r240130, r240131, r240136, r240186, r240196, r240212.

I'd like to thank people who participated in early testing:

Tested by:	Florian Smeets <flo freebsd.org>
Tested by:	Chekaluk Vitaly <artemrts ukr.net>
Tested by:	Ben Wilber <ben desync.com>
Tested by:	Ian FREISLICH <ianf cloudseed.co.za>
2012-09-08 06:41:54 +00:00