simplify it a bit, and make use of that method to determine if an
interface is a candidate for IPv6 rtsol rather than listing all of the
possible wireless interfaces that should _not_ get rtsol'ed.
This change is only relevant for 8.0+ unless the "wlan mandatory" code
gets ported back to RELENG_7.
using freebsd-update. This applies to using freebsd-update in "upgrade
mode" and normal freebsd-update on a security branch.
The backup kernel will be written to /boot/kernel.old, if the directory
does not exist, or the directory was created by freebsd-update in a
previous backup. Otherwise freebsd-update will generate a new directory
name for use by the backup. By default symbol files are not backed up
to save diskspace and avoid filling up the root partition.
This feature is fully configurable in the freebsd-update config file,
but defaults to enabled.
MFC after: 1 week (stable/7)
Reviewed by: cperciva
Approved by: re (kib)
controllers. Controller, array, and drive status can be checked, basic
attributes can be changed, and arrays and spares can be created and deleted.
Controller firmware can also be flashed.
This does not replace MegaCLI, found in ports, as that is officially sanctioned
and supported by LSI and includes vastly more functionality. However, mfiutil
is open source and guaranteed to provide basic functionality, which can be
especially useful if you have a problem and can't get MegaCLI to work.
Approved by: re
Obtained from: Yahoo! Inc.
top of ZVOLs. The problem is that rc.d/fsck runs before rc.d/zfs. The
latter makes ZVOLs to appear in /dev/. In such case rc.d/fsck cannot
find devfs entry and aborts. We cannot simply move rc.d/zfs before
rc.d/fsck, because we first want kern.hostid to be configured (by
rc.d/hostid). If we won't wait (hostid will be 0) we can reuse disks
which are in use by different systems (eg. in SAN/NAS environment).
We also cannot move rc.d/hostid before rc.d/fsck, because rc.d/hostid on
first system start stores generated kern.hostuuid in /etc/hostid file,
so it needs root file system to be mounted read-write.
The fix is to split rc.d/hostid so that rc.d/hostid (which will now run
before rc.d/fsck) only generates hostid and sets up sysctls, but doesn't
touch root file system and rc.d/hostid_save (which is run after
rc.d/root) and only creates /etc/hostid file.
With that in place, we can move ZVOL initialization to dedicated
rc.d/zvol script which runs before rc.d/fsck.
PR: conf/120194
Reported by: James Snow <snow@teardrop.org>
Reviewed by: brooks
Approved by: re (kib)
MFC after: 2 weeks
The Portsnap buildbox now generates teh bits needed for portsnap to produce
INDEX-8; and it hasn't built INDEX-5 for a long time, although the bits are
still distributed for an INDEX-5 from when FreeBSD 5.x reached its EoL.
Approved by: re (kib)
MFC after: 3 days (INDEX-8 addition only)
2) Point people at the pool website and encourage
people to provide a server in the pool (as a
courtesy to the pool guys).
3) Fix a spelling.
4) Comment out the local clock and include a link
to documentation for use of the local clock on
the ntp.org site.
Approved by: re (kib)
modularize it so that new transports can be created.
Add a transport for SATA
Add a periph+protocol layer for ATA
Add a driver for AHCI-compliant hardware.
Add a maxio field to CAM so that drivers can advertise their max
I/O capability. Modify various drivers so that they are insulated
from the value of MAXPHYS.
The new ATA/SATA code supports AHCI-compliant hardware, and will override
the classic ATA driver if it is loaded as a module at boot time or compiled
into the kernel. The stack now support NCQ (tagged queueing) for increased
performance on modern SATA drives. It also supports port multipliers.
ATA drives are accessed via 'ada' device nodes. ATAPI drives are
accessed via 'cd' device nodes. They can all be enumerated and manipulated
via camcontrol, just like SCSI drives. SCSI commands are not translated to
their ATA equivalents; ATA native commands are used throughout the entire
stack, including camcontrol. See the camcontrol manpage for further
details. Testing this code may require that you update your fstab, and
possibly modify your BIOS to enable AHCI functionality, if available.
This code is very experimental at the moment. The userland ABI/API has
changed, so applications will need to be recompiled. It may change
further in the near future. The 'ada' device name may also change as
more infrastructure is completed in this project. The goal is to
eventually put all CAM busses and devices until newbus, allowing for
interesting topology and management options.
Few functional changes will be seen with existing SCSI/SAS/FC drivers,
though the userland ABI has still changed. In the future, transports
specific modules for SAS and FC may appear in order to better support
the topologies and capabilities of these technologies.
The modularization of CAM and the addition of the ATA/SATA modules is
meant to break CAM out of the mold of being specific to SCSI, letting it
grow to be a framework for arbitrary transports and protocols. It also
allows drivers to be written to support discrete hardware without
jeopardizing the stability of non-related hardware. While only an AHCI
driver is provided now, a Silicon Image driver is also in the works.
Drivers for ICH1-4, ICH5-6, PIIX, classic IDE, and any other hardware
is possible and encouraged. Help with new transports is also encouraged.
Submitted by: scottl, mav
Approved by: re
allow them to start after netif. There were too many problems reported
with this change in the short period of time that it lived in HEAD, and
we are too late in the release cycle to properly shake it out.
IMO the issue of having the firewalls up before the network is still a
valid concern, particularly for pf whose default state is wide open.
However properly solving this issue is going to take some investment
on the part of the people who actually use those tools.
This is not a strict reversion of all the changes for r193198 since it
also included some simplification of the BEFORE/REQUIRE logic which is
still valid for ipfilter and ip6fw.
- update for getrlimit(2) manpage;
- support for setting RLIMIT_SWAP in login class;
- addition to the limits(1) and sh and csh limit-setting builtins;
- tuning(7) documentation on the sysctls controlling overcommit.
In collaboration with: pho
Reviewed by: alc
Approved by: re (kensmith)
vt220 will not work better. Even though it probably will remove warnings
about unknown terminal types, a cons25 emulator is not compatible with
vt220 at all.
There is a minor typo in the cons25l7 (':' instead of '|') entry
in src/etc/termcap.small that causes syscons to complain about
bogus characters in /etc/termcap.db.
PR: conf/132777
Submitted by: Nikos Ntarmos <ntarmos@cs.uoi.gr>
MFC after: 1 week
This allows to append custom rules at the end of the file without
risk of confusion that can result when one misses default !ppp line
and doesn't add another program specification and thus subsequent
selector(s) would belong to ppp program block.
Requested by: marck
Submitted by: marck
Approved by: jhb (mentor)
- Remove redundant debugging of consolelog.
- Use `while :', instead of `while [ true ]'. This is done in other
places as well.
Submitted by: Jille Timmermans <jille quis cx> (not jilles)
Reviewed by: jilles
Catalan language is not only spoken in Spain (ca_ES), but also
in Andorra, France and Italy. In Andorra it is the official
language.
(see http://en.wikipedia.org/wiki/Catalan_language#Geographic_distribution)
Add a bunch of symlinks to between ca_ES and ca_AD, ca_FR and ca_IT.
PR: conf/92541
Submitted by: <rmh@io.debian.net>
MFC after: 1 week
This NTP configuration file points to the [012].pool.ntp.org servers,
which will return a list of geographical local NTP servers.
It uses the best-practice options of "iburst" and "maxpoll 9".
It gives examples on how to use the "restrict" commands, which are
unfortunately not working when you use the pool.ntp.org servers.
It sets up a fudge server so any clients syncing against this server
will always be synced even if we lose the master.
The idea of this file was briefly discussed on -net.
PR: conf/58595
Submitted by: Chris Stenton <jacs@gnome.co.uk>
MFC after: 1 week
/etc/rc.d. They use the following new rc variables:
nfsv4_server_enable - set to "YES" to run the experimental server
nfsuserd_enable - set to "YES" to run nfsuserd for NFSv4 client and
server
nfsuserd_flags - command line flags for nfsuserd
nfscbd_enable - set to "YES" to run the experimental nfs client's
NFSv4 callback daemon
nfscbd_flags - command line flags for nfscbd
Reviewed by: dougb
Approved by: kib (mentor)
and -delete (which implies depth-first traversal), avoid using -delete in
favour of -execdir.
This has a side-effect of not removing directories that contain files,
even if we delete all of those files, but IMHO that's a better option
than specifying all possible local filesystem types in this script.
PR: 122811
MFC after: 3 weeks
AUTO are deprecated.' There is no good reason to deprecate them, and
setting this to different values can be useful for custom solutions
and/or one-off configuration problems.
happen right after ypbind, and before anything that uses NIS. The only
change in rcorder accomplished by this patch is make that happen.
PR: conf/117555
Submitted by: John Marshall <john@rwsrv05.mby.riverwillow.net.au>
differently. The output now shows the ruleset and shortens to
slightly different text (using $daily_status_mail_rejects_shorten),
but it should be more descriptive.
PR: 35018
Inspired by: Mikhail Teterin - mi at aldan dot algebra dot com
MFC after: 3 weeks
so that the .h files in src/sys/fs/nfs will be installed under
/usr/include/fs/nfs. This will allow the following utilities to
build, once additions and changes for the experimental nfs subsystem
are committed:
usr.sbin/mountd - Once modified to add support for the
experimental nfs subsystem.
ur.sbin/nfsstat - Once modified to add support for the
experimental nfs subsystem.
usr.sbin/nfscbd - The client side callback daemon for NFSv4.
usr.sbin/nfsuserd - The NFSv4 user/group name<->uid/gid mapping daemon.
usr.sbin/nfsdumpstate - The NFSv4 utility for dumping open/lock state.
usr.sbin/nfsrevoke - The sysadmin command for revoking NFSv4 state.
Approved by: kib (mentor)
(localhost by default) can be successfully looked up. Off by default.
2. New feature: option to create a forwarder configuration file based on
the contents of /etc/resolv.conf. This allows you to utilize a local
resolver for better performance, less network traffic, custom zones, etc.
while still relying on the benefits of your local network resolver.
Off by default.
3. Add named-checkconf into the startup routine. This will prevent named
from trying to start in a situation where it would not be possible to do
so.
During bootup, if /etc/rc.d/savecore detects a core dump file
on the dump device, the core file will be saved, and the crashinfo
script will be run to generate a human-readable report.
This will make it easier for end-users to provide feedback to
developers about kernel crashes.
Reviewed by: jhb
arbitrary commands (outside the jail) associated with said events,
e.g. to bring up/down CARP interfaces representing services run in
jails.
Reviewed by: simon
is set and "natd_enable" is NOT set;
- Accept and pass firewall type to the external firewall script.
Submitted by: Yuri Kurenkov < y -dot- kurenkov -at- init -dot- ru >
MFC after: 3 days
No response from: freebsd-rc
sendmail / postfix etc. may fail to start because DNS is unavailable and /
or the server is unreachable. In the worst case, the machine may become
unusable.
Debugging this issue was far more difficult than it should have been, due
to earlier changes to the rc framework to hide almost all useful information
about the boot process.
Approved by: silence
Even though I increased the amount of pts(4) entries in /etc/ttys some
time ago, I didn't realize back then those entries shouldn't have been
there in the first place.
I just looked at the getttyent() source code and it turns out when you
call setttyent(), it walks through /dev/pts and looks for the device
with the highest number. After you receive EOF's from getttyent(), it
makes up entries for pts(4) devices.
This means that adding entries for pts(4) is somewhat harmful, because
if you now traverse the list, you get redundant entries, so just remove
them.
the jail case specifically. In case we find a proper pre-seeded
devfs in the chroot path (mounted from the base system) permit
starting chrooted else give proper warn/error messages.
PR: conf/103489
Reviewed by: dougb
MFC after: 5 days
time to boot an unplugged system 30 sec. longer for no good reason. Therefore,
add a check to make sure that any DHCP interfaces are plugged in before
waiting.
o no need for special country codes; it's sufficient to use the sku
o no need to specify bands w/ 2.4G frequencies, use the real values
o remove duplicate band specs
the -g and -q options. They do a slightly different thing and
both are necessary when the time difference is large.
Noticed by: danger, in the forums
Approved by: roberto
MFC after: 1 week
Note: this is only really necessary because of the ifconfig
logic to add/remove the jail IPs upon start/stop.
Consensus among simon and I is that the logic should
really be factored out from the startup script and put
into a proper management solution.
- We now support starting of no-IP jails.
- Remove the global jail_<jname>_netmask option as it is only
helpful to set netmasks/prefixes for the right address
family and per address.
- Implement jail_<jname>_ip options to support both
address familes with regard to ifconfig logic.
- Implement _multi<n> support suffix to the jail_<jname>_ip
option to configure additional addresses to avoid overlong,
unreadbale jail_<jname>_ip lines with lots of addresses.
Submitted by: initial work from Ruben van Staveren
Discussed on: freebsd-jail in Nov 2008.
Reviewed by: simon, ru (partial, older version)
MFC after: 1 week
rcshutdown_timeout (normally 30s) around re-parented to init, make
sure both go away using pkill -P.
While noone normally notices this for the system shutdown, it helps for
cleanly shutting down trusted jails.
Found without a killall in the base system, which in rc.d/jail normally
ensures that all processes of a jail to be stopped will be killed.
Reviewed by: silence on current@
MFC after: 4 weeks
the suggested ruleset[1].
While here use an IP from the 'test-net' prefix for docs.
PR: kern/130102 ([1] different problem in the end)
Reviewed by: simon
MFC after: 2 weeks
easier to maintain custom rules for non-system things like ACPI hotkeys.
/etc/devd.conf is already set up to check this directory, no change needed there.
newline when it fails to obtain an address via DHCP. This made the next
rc script begin its output on the same line.
PR: conf
Submitted by: Bruce Cran <bruce at cran dot org dot uk>
MFC after: 3 days
it does come back it would probably be better if users who were interested
in slip added appropriate lines instead of this being here unconditionally.
Reminded by: tut <at> nhamon <dot> com <dot> ua
does ever come back it's probably best if its log file be something that
gets added if the user decided they want to run slip instead of having
it here unconditionally.
src/sys/dev/usb2/core/usbdevs
src/sys/dev/usb2/include/urio2_ioctl.h
src/sys/dev/usb2/storage/ustorage2_fs.h
These files are not used any more.
src/usr.sbin/Makefile
src/etc/mtree/BSD.include.dist
src/include/Makefile
src/lib/Makefile
src/share/man/man7/hier.7
src/share/mk/bsd.libnames.mk
src/etc/mtree/BSD.include.dist
Make "usbconfig" and "libusb20" a part of the default build.
src/sys/dev/usb/rio500_usb.h
src/sys/dev/usb2/storage/urio2.c
Use common include file.
src/sys/dev/usb2/bluetooth/ng_ubt2.c
Make USB bluetooth depend on "ng_hci" module.
src/sys/dev/usb2/controller/ehci2.c
src/sys/dev/usb2/controller/ehci2.h
Patches for Marvell EHCI.
src/sys/dev/usb2/core/usb2_busdma.c
Bugfix for 64-bit platforms. Need to unload the previously loaded DMA
map and some cleanup regarding some corner cases.
src/sys/dev/usb2/core/usb2_core.h
src/sys/dev/usb2/core/usb2_dev.c
src/sys/dev/usb2/core/usb2_dev.h
Bugfix for libusb filesystem interface.
New feature: Add support for filtering device data at the expense of the
userland process.
Add some more comments.
Some minor code styling.
Remove unused function, usb2_fifo_get_data_next().
Fix an issue about "fifo_index" being used instead of "ep_index".
src/sys/dev/usb2/core/usb2_device.c
src/sys/dev/usb2/core/usb2_generic.c
Bugfix for Linux USB compat layer. Do not free non-generic FIFOs when
doing an alternate setting.
Cleanup USB IOCTL and USB reference handling.
Fix a corner case where USB-FS was left initialised after
setting a new configuration or alternate setting.
src/sys/dev/usb2/core/usb2_hub.c
Improvement: Check all USB HUB ports by default at least one time.
src/sys/dev/usb2/core/usb2_request.c
Bugfix: Make sure destination ASCII string is properly zero terminated
in all cases.
Improvement: Skip invalid characters instead of replacing with a dot.
src/sys/dev/usb2/core/usb2_util.c
src/sys/dev/usb2/image/uscanner2.c
Spelling.
src/sys/dev/usb2/include/Makefile
Share "usbdevs" with the old USB stack.
src/sys/dev/usb2/include/usb2_devid.h
src/sys/dev/usb2/include/usb2_devtable.h
Regenerate files.
Alfred: Please fix the RCS tag at the top.
src/sys/dev/usb2/include/usb2_ioctl.h
Fix compilation of "kdump".
src/sys/dev/usb2/serial/ubsa2.c
src/sys/dev/usb2/serial/ugensa2.c
Remove device ID's which will end up in a new 3G driver.
src/sys/dev/usb2/sound/uaudio2.c
Correct a debug printout.
src/sys/dev/usb2/storage/umass2.c
Sync with old USB stack.
src/lib/libusb20/libusb20.3
Add more documentation.
src/lib/libusb20/libusb20.c
Various bugfixes and improvements.
src/usr.sbin/usbconfig/dump.c
src/usr.sbin/usbconfig/usbconfig.c
New commands for dumping strings and doing custom USB requests from
the command line.
Remove keyword requirements from generated files:
"head/sys/dev/usb2/include/usb2_devid.h"
"head/sys/dev/usb2/include/usb2_devtable.h"
and server. This replaces the RPC implementation of the NFS client and
server with the newer RPC implementation originally developed
(actually ported from the userland sunrpc code) to support the NFS
Lock Manager. I have tested this code extensively and I believe it is
stable and that performance is at least equal to the legacy RPC
implementation.
The NFS code currently contains support for both the new RPC
implementation and the older legacy implementation inherited from the
original NFS codebase. The default is to use the new implementation -
add the NFS_LEGACYRPC option to fall back to the old code. When I
merge this support back to RELENG_7, I will probably change this so
that users have to 'opt in' to get the new code.
To use RPCSEC_GSS on either client or server, you must build a kernel
which includes the KGSSAPI option and the crypto device. On the
userland side, you must build at least a new libc, mountd, mount_nfs
and gssd. You must install new versions of /etc/rc.d/gssd and
/etc/rc.d/nfsd and add 'gssd_enable=YES' to /etc/rc.conf.
As long as gssd is running, you should be able to mount an NFS
filesystem from a server that requires RPCSEC_GSS authentication. The
mount itself can happen without any kerberos credentials but all
access to the filesystem will be denied unless the accessing user has
a valid ticket file in the standard place (/tmp/krb5cc_<uid>). There
is currently no support for situations where the ticket file is in a
different place, such as when the user logged in via SSH and has
delegated credentials from that login. This restriction is also
present in Solaris and Linux. In theory, we could improve this in
future, possibly using Brooks Davis' implementation of variant
symlinks.
Supporting RPCSEC_GSS on a server is nearly as simple. You must create
service creds for the server in the form 'nfs/<fqdn>@<REALM>' and
install them in /etc/krb5.keytab. The standard heimdal utility ktutil
makes this fairly easy. After the service creds have been created, you
can add a '-sec=krb5' option to /etc/exports and restart both mountd
and nfsd.
The only other difference an administrator should notice is that nfsd
doesn't fork to create service threads any more. In normal operation,
there will be two nfsd processes, one in userland waiting for TCP
connections and one in the kernel handling requests. The latter
process will create as many kthreads as required - these should be
visible via 'top -H'. The code has some support for varying the number
of service threads according to load but initially at least, nfsd uses
a fixed number of threads according to the value supplied to its '-n'
option.
Sponsored by: Isilon Systems
MFC after: 1 month
but there won't be one so root won't be able to login; edit the installed
file to use /bin/sh in this case.
o while here split csh-related files apart from sh and only install them
when requested
I noticed on a system at home that restarting named(8) causes the
/var/named/dev mount to be moved to the bottom of the mount list,
because it gets remounted. When I received the daily security email this
morning, I was quite amazed to see that the security report listed the
differences, while it was nothing out of the ordinary.
If we just throw the `mount -p' output through sort(1), we'll only
receive notifications about changes to mounts if something has really
changed.
control over the result of buildworld and installworld; this especially
helps packaging systems such as nanobsd
Reviewed by: various (posted to arch)
MFC after: 1 month
This allows the location of the configuration data to be relocated
within the filesystem containing it. A nullfs mount is used in order
to achieve this.
Obtained from: XORP, Inc.
As discussed with Robert Watson on the src-committers list, it is safer
to keep at least some pty(4) entries in /etc/ttys, for applications that
roll their own PTY allocation routine and only search for BSD-style
PTY's.
This means we've now just toggled the amount of entries for pts(4) and
pty(4).
Requested by: rwatson
Because we now use pts(4)-style PTY's exclusively, there is no use for
these entries in /etc/ttys. Right now the pts(4) entries only go from 0
to 255. Because we're going to touch these files anyway, increase the
number to 511.
Discussed with: philip (ex-mentor)
The last half year I've been working on a replacement TTY layer for the
FreeBSD kernel. The new TTY layer was designed to improve the following:
- Improved driver model:
The old TTY layer has a driver model that is not abstract enough to
make it friendly to use. A good example is the output path, where the
device drivers directly access the output buffers. This means that an
in-kernel PPP implementation must always convert network buffers into
TTY buffers.
If a PPP implementation would be built on top of the new TTY layer
(still needs a hooks layer, though), it would allow the PPP
implementation to directly hand the data to the TTY driver.
- Improved hotplugging:
With the old TTY layer, it isn't entirely safe to destroy TTY's from
the system. This implementation has a two-step destructing design,
where the driver first abandons the TTY. After all threads have left
the TTY, the TTY layer calls a routine in the driver, which can be
used to free resources (unit numbers, etc).
The pts(4) driver also implements this feature, which means
posix_openpt() will now return PTY's that are created on the fly.
- Improved performance:
One of the major improvements is the per-TTY mutex, which is expected
to improve scalability when compared to the old Giant locking.
Another change is the unbuffered copying to userspace, which is both
used on TTY device nodes and PTY masters.
Upgrading should be quite straightforward. Unlike previous versions,
existing kernel configuration files do not need to be changed, except
when they reference device drivers that are listed in UPDATING.
Obtained from: //depot/projects/mpsafetty/...
Approved by: philip (ex-mentor)
Discussed: on the lists, at BSDCan, at the DevSummit
Sponsored by: Snow B.V., the Netherlands
dcons(4) fixed by: kan
"workstation" firewall types to be set from rc.conf so that rc.firewall
no longer needs local patching to be usable for those types. For now
I've set the variables in /etc/defaults/rc.conf to the previous defaults
in /etc/rc.firewall.
PR: bin/65258
Submitted by: Valentin Nechayev netch of netch.kiev.ua
Silence from: net
MFC after: 2 weeks
and "mask" variables into a single "net" variable that contains a full
network address (including either a netmask or prefix length at the user's
choice). Update the example settings to match.
MFC after: 2 weeks
- don't run it if net.inet.ip.fw.verbose = 0 as it is pointless
- handle rules without logging limit correctly [1]
(those rules show up without logamount in "ipfw -a list")
PR: conf/126060 [1]
MFC after: 1 month
to allow them to do a "clean" shutdown.
I purposely avoided making changes to network-related stuff since the
system shutting down is pretty conclusive, and there may be complicated
dependencies on the network that I would rather not try to unravel.
I also skipped kerberos-related stuff for the reasons above, and
because I have no way to test it.
The uart(4) driver has the advantage of supporting a wider variety of
hardware on a greater amount of platforms. This driver has already been
the standard on platforms such as ia64, powerpc and sparc64.
I've decided not to change anything on pc98. I'd rather let people from
the pc98 team look at this.
Approved by: philip (mentor), marcel
Give a better example if a user absolutely must use this option, and
suggest they pick something from the ephemeral port range rather than
port 53. This means that the example will not work if it is merely
uncommented, but this will hopefully encourage users to read the comment.
This includes hotkeys support and sysctl variables to control camera
and card reader. These new sysctls don't have CTFLAG_ANYBODY set.
While there add entries to devd.conf related to the Eee volume keys.
Reviewed by: phillip
MFC after: 1 week
Also tested by: lme (previous version)
others. In the case where it displayed warnings it would still return
succesfully. Modify it so that it returns the number of sysctls that
it was not able to set.
Make use of this in rc.d to display only *unsuccessfull* attempts to
set sysctls.
the interface name of interfaces that were configured.
This change has the added benefit that ifn_start() and
ifn_stop() in network.subr no longer write to standard output.
Whether to output and what to output is now handled entirely
in rc.d/netif.
service behind $rc_quiet. Instead, output a warning if the pre-command
routine or the command itself failed. Arguably, it's more useful to know when
a command failed to start than it is to have an endless list of
"Starting ...." lines[1].
[1] - This change actually helped me to discover a bug in rc.d/{lockd,statd}
(fixed in r179941) that used to fail silently before.
documents away from being public accessible. Replace link to
the Bluetooth specification document with the document name.
Pointed out by: SoftLover < slserg at uic dot tula dot ru >
MFC after: 3 days
parts relied on the now removed NET_NEEDS_GIANT.
Most of I4B has been disconnected from the build
since July 2007 in HEAD/RELENG_7.
This is what was removed:
- configuration in /etc/isdn
- examples
- man pages
- kernel configuration
- sys/i4b (drivers, layers, include files)
- user space tools
- i4b support from ppp
- further documentation
Discussed with: rwatson, re
NET_NEEDS_GIANT. netatm has been disconnected from the build for ten
months in HEAD/RELENG_7. Specifics:
- netatm include files
- netatm command line management tools
- libatm
- ATM parts in rescue and sysinstall
- sample configuration files and documents
- kernel support as a module or in NOTES
- netgraph wrapper nodes for netatm
- ctags data for netatm.
- netatm-specific device drivers.
MFC after: 3 weeks
Reviewed by: bz
Discussed with: bms, bz, harti
non-dhcp interfaces to negotiate/associate this will make more sense.
This also correctly gets run after both devd and netif are run so it has
a chance of working.
The rc.initdiskless functionality is used by NanoBSD to allow configuration
files to live on a separate configuration slice, which acts as NVRAM, whilst
the system image is mounted read-only.
Normally, if the remount command fails during boot, this is regarded as
a fatal error. If /conf/T/M/remount_optional is present, this error is
non-fatal. If the file is not present, the default behaviour is unchanged.
This is very useful for people building live CD images using FreeBSD,
where the NVRAM lives somewhere completely differently from the system image,
and may be present on removable media which is not present during the
initial boot.
To preserve the existing behavior of etc/rc.d/netif, add code to wait
up to if_up_delay seconds (30 seconds by default) for a default route to
be configured if there are any dhcp interfaces. This should be extended
to test that the interface is actually up.
X-MFC after:
none or if the file doesn't exist (there's no ntp.conf in the base install).
PR: conf/119592
Submitted by: Renaud Waldura <renaud+freebsd@waldura.org>
MFC after: 1 week
more wlans_<ifn> and create_args_<ifn>
Add documentation for these variants and generally update the wireless
device example.
There is are very short lived shim from vaps_<ifn> which produces
a warning and vap_create_<ifn> which does not. Misuse the MFC
notification service to remind me to remove them.
MFC after: 3 weeks
only work if there's just one interface doing dhcp. This version implements
the same logic as the version in the PR, but uses pgrep to be less verbose.
PR: conf/95905
MFC after: 1 week
mode at boot time. Multiple profiles can be started at the same time.
The whole idea is very similar to the ppp rc script.
Document Bluetooth knobs in rc.conf(5)
MFC after: 1 week
and config file
o change default logging options from -q to -s (log to syslog); this
is currently broken for boot-time startup as syslogd is started too
late but that'll be dealt with separately
MFC after: 2 weeks
mountcritremote REQUIREs FILESYSTEMS, and that script REQUIREs zfs,
so this change is a noop. By removing it we make life a little easier
both for rcorder(8) and for debugging down the road.
Approved by: 2 weeks of silence from pjd
per-profile variables of the form ppp_<profile>_unit. No ppp_unit
variable is supported since tying the same unit to more than one profile
won't work.
PR: conf/122127
MFC after: 1 week
to _ when evaluating ppp_<profile>_nat and ppp_<profile>_mode. Document
the per-profile variables.
PR: conf/121452, conf/122127 (partial)
MFC after: 1 week
modifications merged. I had initially expected that people would
put any local changes into /boot/loader.conf, but it turns out that
editing /boot/device.hints is something many people do.
Suggested by: Jaakko Heinonen
MFC after: 1 week
we can remove the file as early as possible, but shut up nextboot at this moment
if the operation is failed, because /boot is not necessarily a part of /; the
newly added second run is placed in rc.d/mountlate after all filesystems were
mounted.
Discussed at: -rc@
Suggestions from: brooks, mtm
MFC after: 1 month
because another command (echo) is executed between the mount command
and the check.
Reported by: Sergey Baturov <sergey@toor.org.ru>
MFC after: 2 weeks
specific one. Instruct it to listen on all interfaces so that enabling
it in rc.conf(5) works "out of the box."
PR: conf/121406
Submited by: trasz
MFC after: 1 week
scripts at boot. This is currently disabled by default. /etc/ddb.conf
contains some potentially reasonable default scripts.
PR: conf/119995
Submitted by: Scot Hetzel <swhetzel at gmail dot com> (Earlier version)
X-MFC after: textdumps
find | sort. As a bonus, this simplifies the logic considerably. Also
remove the bogus "overruning the args to ls" comment and the corresponding
"-n 20" argument to xargs; the whole point with xargs is precisely that it
knows how large the argument list can safely get.
Note that the first run of the updated script may hypotheticall produce
false positives due to differences between find's and sort's sorting
algorithm. I haven't seen this during testing, but others might.
MFC after: 2 weeks
rapid wireless association changes in my experience), there is a race
where dhclient is in the process of exiting due to the link going down
when the link coming up causes devd to try and start a new one. This
results is the link being up, but no dhclient running.
Work around this race by checking a second time after a one second delay
before refusing to start a dhclient instance due to one already being
running.
MFC after: 1 week
out because the rc.conf(5) variable was not enabled. Display a
message that the command wasn't run and offer suggestions on
what the user can do.
Implement a quiet prefix, which will disable some diagnostics. The
fast prefix also implies quiet. During boot we use either fast or
quiet. For shutdown we already use 'faststop'. So, this informational
message should only appear during interactive use.
An additional benefit of having a quiet prefix is that we can start
putting some of our diagnostic messages behind this knob and start
"de-cluttering" the console during boot and shutdown.
during boot and shutdown. I think I'll hide it behind autoboot or
maybe take brooks@ suggestion and implement a different command
prefix for booting/shutdown purposes, but in any case it needs more
thought and attention.
Noticed by: ceri
Pointyhat to: mtm
- Allow IP in firewall_nat_interface, just like natd_interface
- Allow additional configuration parameters passed to ipfw via
firewall_nat_flags
- Document firewall_nat_* in defaults/rc.conf
Tested by: Albert B. Wang <abwang at gmail.com>
MFC after: 1 month
included in the kernel by default. Remove reference to this option
from defaults/rc.conf and rc.conf(5).
PR: conf/119098
Submitted by: Beat Gaetzi
MFC after: 1 week
the rejected mail reports to tally the rejects per blacklist without
providing details about individual sender hosts. The default configuration
keeps the reports in their original form.
MFC after: 1 week
.ICE-unix, .font-unix, .XIM-unix) when purging files from /tmp via the
daily 100.clean-tmps job. If you are logged into an X session longer
than the timeout period (default of 3 days), then this job can delete
the X11 sockets out from under the session without this fix.
MFC after: 3 days
