- Make the socket path random and move it out of /tmp as that's outside ATF's
prescribed path
MFC after: 1 week
Sponsored by: EMC / Isilon Storage Division
- Replace a hardcoded PATH_MAX value with sizeof(path)
- Use path like an array, not a pointer, and always try to unlink it in cleanup
MFC after: 1 week
Sponsored by: EMC / Isilon Storage Division
- Randomize the bind port to allow 2+ consecutive calls in < 10 minutes, and
to also not fail if (for instance) there's a server already listening on port
8080
- Don't leak the listening socket / fds into the child process
- Fix warnings:
-- Remove argc/argv (-Wunused)
-- Mark sig __unused (-Wunused)
-- Mark quit static (-Wmissing-variable-declarations)
MFC after: 1 week
Sponsored by: EMC / Isilon Storage Division
The output is still broken if prove -rv is run and the testcase aborts
prematurely with fail_assertion (the testcase doesn't really conform to TAP
protocol properly, except when it completes fully)
MFC after: 1 week
Sponsored by: EMC / Isilon Storage Division
The testcase fails today on subtest # 9
The output is still broken if prove -rv is run and the testcase aborts
prematurely (the testcase doesn't really conform to TAP protocol properly,
except when it completes fully)
MFC after: 1 week
Sponsored by: EMC / Isilon Storage Division
- Convert errx(-1, ..) to errx(1, ..)
- Move the aio(4) checks to a single function (aio_available); use modfind(2)
instead of depending on SIGSYS (doesn't work when aio(4) support is missing,
not documented in the aio syscall manpages).
- Use aio_available liberally in the testcase functions
- Use mkstemp(3) + unlink(2) instead of mktemp(3)
- Fix some -Wunused warnings
- Bump WARNS to 6
MFC after: 1 week
Submitted by: mjohnston [*]
Sponsored by: EMC / Isilon Storage Division
- Move to ANSI definitions syntax, removing warnings about type promotions.
- Remove __P().
- Staticise everything.
- Remove warnings about unused args for signal handlers.
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
Some users build FreeBSD as non-root in Perforce workspaces. By default,
Perforce sets files read-only unless they're explicitly being edited.
As a result, the -f argument must be used to cp in order to override the
read-only flag when copying source files to object directories. Bare use of
'cp' should be avoided in the future.
Update all current users of 'cp' in the src tree.
Reviewed by: emaste
MFC after: 1 week
Sponsored by: Spectra Logic
- Handle the output from newer versions of openssl md5, similar to what
pjd@ did in r248304
MFC after: 2 weeks
Sponsored by: EMC / Isilon Storage Division
- Remove tools/regression/pjdfstest
- Add upgrade directions for contrib/pjdfstest
- Add a note to UPDATING for the move (the reachover Makefiles are coming
soon)
Functional differences:
- ftruncate testcases are added from upstream (github)
Non-functional differences:
- The copyright for the project has been updated to 2012
- pjd's contact information has been updated
Discussed with: -testing, jmmv, pjd
MFC after: 2 weeks
Sponsored by: EMC / Isilon Storage Division
This mutes warnings with clang
Approved by: rpaulo (mentor)
Reviewed by: das, kargl (both as part of a larger patch)
Phabric: D742
Sponsored by: EMC / Isilon Storage Division
Remove the .t wrappers
Rename all of the TAP test applications from test-<test> to
<test>_test to match the convention described in the TestSuite
wiki page
humanize_number_test.c:
- Fix -Wformat warnings with counter variables
- Fix minor style(9) issues:
-- Header sorting
-- Variable declaration alignment/sorting in main(..)
-- Fit the lines in <80 columns
- Fix an off by one index error in the testcase output [*]
- Remove unnecessary `extern char * optarg;` (this is already provided by
unistd.h)
Phabric: D555
Approved by: jmmv (mentor)
MFC after: 2 weeks
Obtained from: EMC / Isilon Storage Division [*]
Submitted by: Casey Peel <cpeel@isilon.com> [*]
Sponsored by: EMC / Isilon Storage Division
Rename all of the TAP test applications from <test> to <test>_test
to match the convention described in the TestSuite wiki page
Phabric: D538
Approved by: jmmv (mentor)
Sponsored by: EMC / Isilon Storage Division
This includes:
o All directories named *ia64*
o All files named *ia64*
o All ia64-specific code guarded by __ia64__
o All ia64-specific makefile logic
o Mention of ia64 in comments and documentation
This excludes:
o Everything under contrib/
o Everything under crypto/
o sys/xen/interface
o sys/sys/elf_common.h
Discussed at: BSDcan
Update the manpage to reflect this change.
- Always set the current position to the first null-byte when opening in append
mode. This makes the implementation compatible with glibc's. Update the test
suite.
Reported by: pho
Approved by: cognet
option. Convert all other uses to MK_CTF=no. Set MK_CTF=no rather than
the indirect WITHOUT_CDDL in filemon regression. It is expected that
NO_CTF will be removed in FreeBSD 12 entirely.
An execute-only fd (opened with O_EXEC) allows neither read() nor write()
and is therefore incompatible with all stdio modes. Therefore, the [EINVAL]
error applies.
Also adjust the similar check in freopen() with a NULL path, even though
this checks an fd which is already from a FILE.
and finish the job. ncurses is now the only Makefile in the tree that
uses it since it wasn't a simple mechanical change, and will be
addressed in a future commit.
Interestingly, the pkill tool lives in bin, not usr.bin. Haven't bothered
to check if this is because the tool moved or because the tests were
originally added in the wrong place.
Note that these tests are for fmake, not bmake, and thus they are not
installed nor run when bmake is selected (the default). Yes, I have
wasted a *ton* of time on moving tests for no real reason other than
ensuring they are not left behind.
But maybe, just maybe, it was not work in vain: the majority of these
tests also work with bmake and the few that don't may point at broken
stuff. For example, the tests for the "archive" feature do not work
with bmake, but bmake's manpage and source tree seem to imply that they
should. So... to be investigated later; need to poke sjg@.
I'm starting with the easy cases. The leftovers need to be looked at a
bit more closely.
Note that this change _does_ modify the code of the old tests. This is
required in order to allow the code to locate the data files in the
source directory instead of the current directory, because Kyua
automatically changes the latter to a temporary directory.
Also note that at least one test is known to be broken here. Actually,
the test is not really broken: it's marked as a TODO but unfortunately
Kyua's TAP parser currently does not understand that. Will have to be
fixed separately.
This change was originally going to only migrate the usr.sbin tests but, as
it turns out, the usr.sbin/sa/ tests require files from usr.bin/lastcomm/
so it's better to just also migrate the latter at the same time. The other
usr.bin tests will be moved separately.
To make these tests work within the test suite, some of them have required
changes to prevent modifying the source directory and instead just rely on
the current directory for file manipulation.
AppleTalk was a network transport protocol for Apple Macintosh devices
in 80s and then 90s. Starting with Mac OS X in 2000 the AppleTalk was
a legacy protocol and primary networking protocol is TCP/IP. The last
Mac OS X release to support AppleTalk happened in 2009. The same year
routing equipment vendors (namely Cisco) end their support.
Thus, AppleTalk won't be supported in FreeBSD 11.0-RELEASE.
IPX was a network transport protocol in Novell's NetWare network operating
system from late 80s and then 90s. The NetWare itself switched to TCP/IP
as default transport in 1998. Later, in this century the Novell Open
Enterprise Server became successor of Novell NetWare. The last release
that claimed to still support IPX was OES 2 in 2007. Routing equipment
vendors (e.g. Cisco) discontinued support for IPX in 2011.
Thus, IPX won't be supported in FreeBSD 11.0-RELEASE.
This function is not public and brooks (initial committer adding the code)
suggests the deletion of the tests (which I don't know if they work)
instead of changing the visibility of the function.
Just replace the simple calls to the library with ad-hoc code. We should
later rewrite these with the ATF libraries anyway, which are part of the
base system.
Tests that cannot be run because a precondition is not met should be
marked as skipped, not failed. Do this for the tests in mdconfig that
first check if the caller user is root.
Small divergences in the output padding made some sa tests fail. Just
trim all whitespace from the outputs and the golden files so comparisons
are less fragile and the tests pass again.
Because bmake is the default make being built, many of the tests here
fail due to differences between the two. Just skip the tests for now
when using fmake.
This fixes a pgrep test that assumed that PID 2 was named g_event. This
does not seem to be the case any longer (and I don't know if it ever was
in all possible setups).
Change this test to use the idle loop instead and determine its expected
PID using ps without assuming any specific ID.
First, change the driver to run the installed yacc instead of the one from
/usr/obj (which might not be there), just as we (intend to) do with all
other tests.
Second, regenerate the expected output files from scratch. Based on visual
inspection, the differences seem OK. But this highlights that the tests in
here are too fragile and, possibly, useless: we should be testing the
behavior of the generated program, not the literal output. Something to be
addressed later.
were a little broken and not automatable, with unix_seqpacket_test.
It's coverage is a superset of the old tests and it uses ATF. It
includes test cases for bugs kern/185813 and kern/185812.
PR: kern/185812
PR: kern/185813
Sponsored by: Spectra Logic
MFC after: 2 weeks
- Compile the tests with .t suffix, so prove can use them directly.
- The CHECKX() macro should increment ntest just like the CHECK() macro.
- For consistency remove # from the pwd.t output.
Submitted by: Mariusz Zaborski <oshogbo@FreeBSD.org>
This change is a proof of concept on how to easily integrate existing
tests from the tools/regression/ hierarchy into the /usr/tests/ test
suite and on how to adapt them to the new layout for src.
To achieve these goals, this change:
- Moves tests from tools/regression/bin/<tool>/ to bin/<tool>/tests/.
- Renames the previous regress.sh files to legacy_test.sh.
- Adds Makefiles to build and install the tests and all their supporting
data files into /usr/tests/bin/.
- Plugs the legacy_test test programs into the test suite using the new
TAP backend for Kyua (appearing in 0.8) so that the code of the test
programs does not have to change.
- Registers the new directories in the BSD.test.dist mtree file.
Reviewed by: freebsd-testing
Approved by: rpaulo (mentor)
Although <&0 does nothing, it is a redirection affecting standard input and
should therefore disable the </dev/null redirection implicit in a background
command.
This call should be a sufficiently close approximation of what happens
when a filesystem is unmounted and remounted. To be more specific, it
should test that the data that was in the page cache is the same data
that ends up on a stable storage or in a filesystem's internal cache,
if any.
This will catch the cases where a page with modified data is marked as
a clean page for whatever reason.
While there, make logging of the special events (open+close before
plus invalidation now) more generic and slightly better than the previous
hack.
MFC after: 10 days
This option should be useful for testing if a filesystem uses the
unified buffer / page cache.
Or, if filesystem's emulation of the unified cache works as expected.
This should be the case for e.g. ZFS.
MFC after: 1 week
- Fix ALWAYS_INSTALL to take precedence over the FreeBSD ID checks.
In particular, always install a file where the only change was
the FreeBSD ID even if -F is specified.
- Fix the -F option in the case that the only upstream change is a
change in the FreeBSD ID and the local file is removed.
- Add tests for these two cases.
passed to mergemaster. In this mode, only changes to /etc/master.passwd
and /etc/group are merged to /etc. In addition, it uses a temporary
tree to stage these changes rather than overwriting the existing
'current' and 'previous' trees so that a full update can be run after
a normal installworld has completed.
MFC after: 2 weeks
If job control is not enabled, background jobs started with ... & ignore
SIGINT and SIGQUIT so that they are not affected by such signals that are
intended for the foreground job. However, this should not prevent
reassigning a different action for these signals (as if the shell invocation
inherited these signal actions from its parent).
Austin group issue #751
Example:
{ trap - INT; exec sleep 10; } & wait
A Ctrl+C should terminate the sleep command.
Since so many programs don't check return value, always NUL terminate
the buf...
fix rounding when using base 1024 (the bug that started it all)...
add a set of test cases so we can make sure that things don't break
in the future...
Thanks to Clifton Royston for testing and the test program...
Approved by: re (hrs, glebius)
MFC after: 1 week
Austin Group issue #411 requires 'e' to be accepted before and after 'x',
and encourages accepting the characters in any order, except the initial
'r', 'w' or 'a'.
Given that glibc accepts the characters after r/w/a in any order and that
diagnosing this problem may be hard, change our libc to behave that way as
well.
Formerly, return always returned from a function if it was called from a
function, even if there was a closer dot script. This was for compatibility
with the Bourne shell which only allowed returning from functions.
Other modern shells and POSIX return from the function or the dot script,
whichever is closest.
Git 1.8.4's rebase --continue depends on the POSIX behaviour.
Reported by: Christoph Mallon, avg
The FFLAGS and OFLAGS now work correctly also for files opened with O_EXEC.
Except possibly fuse, the other users pass values without O_EXEC set. fuse
appears to assume O_EXEC is handled correctly.
Although F_SETFL may not be commonly used for execute-only file descriptors,
F_GETFL may be useful to find the access mode.
As per POSIX, a simple command must have at least one redirection,
assignment word or command word.
These occured in rare cases such as eval "f()" .
The extension of allowing no commands inside { }, if, while, for, etc.
remains.
POSIX does not require ++ and -- in arithmetic. It is probably more useful
to reject them than to treat ++x and --x as x silently.
Note that the behaviour of increment and decrement can be obtained via
(x+=1), ((x+=1)-1), (x-=1) and ((x-=1)+1).
PR: bin/176444
Although using -i with -c does not seem very useful, it seems inappropriate
to read commands from the terminal in this case.
Side effect: if the -s -c extension is used and the -s option is turned off
using 'set +s' during the interactive part, the shell now exits after an
error or interrupt. Note that POSIX only specifies -s as option to sh, not
to set.
See also Austin Group issue #718.
This small utility performs a sequence of atomic operations with random
parameters on an atomic variable. For every type, we also create 16
variables, to ensure that we test the correctness at different
alignments.
This is required by POSIX, at least for pids that are not known child
processes.
Other problems with job specifications still cause wait to abort with
exit status 2.
PR: 176916
This is only part of the PR; the behaviour for unknown/invalid pids/jobs
remains unchanged (aborts the builtin with status 2).
PR: 176916
Submitted by: Vadim Goncharov
I initially thought wchar_t was locale independent, but this seems to be
only the case on Linux. This means that we cannot depend on the *wc*()
routines to implement *c16*() and *c32*(). Instead, use the Citrus
libiconv that is part of libc.
I'll see if there is anything I can do to make the existing functions
somewhat useful in case the system is built without libiconv in the
nearby future. If not, I'll simply remove the broken implementations.
Reviewed by: jilles, gabor
long double versions don't pass yet. (They are rather nit-picky cases,
so there's ongoing discussion with Bruce about whether it is worth the
performance cost.)
because different tests have different ideas about what it means to be
"close enough" to the right answer, depending on the properties of the
function being tested. In the process, I fixed some warnings and
added a few more 'volatile' hacks, which are sufficient to make all
the tests pass at -O2 with clang.
This reverts commit r247274.
As maintainer of sh, I disapprove of this feature addition.
It is too specific and can be done without easily using find(1) or stat(1).
I will add some hints to the test(1) man page shortly.
In general, FreeBSD sh is not the place to invent new shell language
features. This is how it has been maintained and adding features randomly
does not work with that.
The new syntax (e.g. [ FILE1 -ntca FILE2 ]) looks cryptic to me.
In most shells (including our sh), break outside a loop does nothing with
status 0, or at least does not abort. Therefore, scripts sometimes (buggily)
depend on this.
result depend on the cosine and sine of the imaginary part.
Small values are used in the new tests such that cosine and sine are well
defined.
Reviewed by: das
are workarounds for various symptoms of the problem described in clang
bugs 3929, 8100, 8241, 10409, and 12958.
The regression tests did their job: they failed, someone brought it
up on the mailing lists, and then the issue got ignored for 6 months.
Oops. There may still be some regressions for functions we don't have
test coverage for yet.
The <uchar.h> header, part of C11, adds a small number of utility
functions for 16/32-bit "universal" characters, which may or may not be
UTF-16/32. As our wchar_t is already ISO 10646, simply add light-weight
wrappers around wcrtomb() and mbrtowc().
While there, also add (non-yet-standard) _l functions, similar to the
ones we already have for the other locale-dependent functions.
Reviewed by: theraven
If 'e' is used, the kernel must support the recently added pipe2() system
call.
The use of pipe2() with O_CLOEXEC also fixes race conditions between
concurrent popen() calls from different threads, even if the close-on-exec
flag on the fd of the returned FILE is later cleared (because popen() closes
all file descriptors from earlier popen() calls in the child process).
Therefore, this approach should be used in all cases when pipe2() can be
assumed present.
The old version of popen() rejects "re" and "we" but treats "r+e" like "r+".
This test case sometimes fails because of an EINTR-related race condition.
Fixing this race condition likely requires an extra system call per byte,
which would make the read builtin even slower than it already is, or very
complicated trickery. Therefore, remove the test case for now.
* If read -t times out, return status as if interrupted by SIGALRM
(formerly 1).
* If a trapped signal interrupts read, return status 128+sig (formerly 1).
* If [EINTR] occurs but there is no trap, retry the read (for example
because of a SIGWINCH in interactive mode).
* If a read error occurs, write an error message and return status 2.
As before, a variable assignment error returns 2 and discards the remaining
data read.
Words in shell script are separated by spaces or tabs independent of the
value of IFS. The value of IFS is only relevant for the result of
substitutions. Therefore, there should be a space between 'wordexp' and the
words to be expanded, not an IFS character.
Paranoia might dictate that the shell ignore IFS from the environment (even
though our sh currently uses it), so do not depend on it in the new test
case.
u_long. Before this change it was of type int for syscalls, but prototypes
in sys/stat.h and documentation for chflags(2) and fchflags(2) (but not
for lchflags(2)) stated that it was u_long. Now some related functions
use u_long type for flags (strtofflags(3), fflagstostr(3)).
- Make path argument of type 'const char *' for consistency.
Discussed on: arch
Sponsored by: The FreeBSD Foundation
If syntactically invalid job identifiers are to be taken as jobs that exited
with status 127, this should not apply to options, so that we can add
options later if need be.
This ensures 'return' in a trap returns the correct status to the caller.
If evalskip is not set or if it is overridden by a previous evalskip, keep
the old behaviour of restoring the exit status from before the trap.
routines provide write-only stdio FILE objects that store their data in a
dynamically allocated buffer. They are a string builder interface somewhat
akin to a completely dynamic sbuf.
Reviewed by: bde, jilles (earlier versions)
MFC after: 1 month
access, birth, change and modify times of two files, instead of only
being able to compare modify times. The builtin test in sh(1) will
automagically acquire the same expansion.
Approved by: grog
MFC after: 2 weeks
Quoting the submitter:
- Added tests for SCM_BINTIME, LOCAL_PEERCRED, cmsghdr.cmsg_len
- Code that checks correctness of groups was corrected (getgroups(2) change)
- unix_cmsg.c was completely redesigned and simplified
- Use less timeout value in unix_cmsg.c for faster work
- Added support for not sending data in a message, not sending data and
data array associated with a cmsghdr structure in a message
- Existent tests were improved
- unix_cmsg.t was redesigned and simplified
Correctness of unix_cmsg verified on 7.1-STABLE, 9.1-STABLE and 10-CURRENT.
PR: bin/131567
Submitted by: Andrey Simonenko <simon@comsys.ntu-kpi.kiev.ua>
MFC after: 2 weeks
with the user's namespace.
- Correct size and position variables type from long to size_t.
- Do not set errno to ENOMEM on malloc failure, as malloc already does so.
- Implement the concept of "buffer data length", which mandates what SEEK_END
refers to and the allowed extent for a read.
- Use NULL as read-callback if the buffer is opened in write-only mode.
Conversely, use NULL as write-callback when opened in read-only mode.
- Implement the handling of the ``b'' character in the mode argument. A binary
buffer differs from a text buffer (default mode if ``b'' is omitted) in that
NULL bytes are never appended to writes and that the "buffer data length"
equals to the size of the buffer.
- Remove shall from the man page. Use indicative instead. Also, specify that
the ``b'' flag does not conform with POSIX but is supported by glibc.
- Update the regression test so that the ``b'' functionality and the "buffer
data length" concepts are tested.
- Minor style(9) corrections.
Suggested by: jilles
Reviewed by: cognet
Approved by: cognet
