The cd9660_open() does pass whole path to dirmatch() and we need to
compare only the current path component, not full path.
Additinally, skip over duplicate / (if any) and check if the last component
in the path was meant to be directory (having trailing /). If it is in fact
a file, error out.
Loader does fail to properly match the file name in directory record and
does open file based on prefix match.
For fix, we check the name lengths first.
Reviewed by: allanjude
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D19213
This commit fixes a remaining output buffer overrun in the
single-sector case when there is a non-zero tail.
Reviewed by: allanjude, tsoome
MFC after: 3 months
MFC with: r344226
Differential Revision: https://reviews.freebsd.org/D19220
The bug occurred when a bounce buffer was used and the requested read
size was greater than the size of the bounce buffer. This commit also
rewrites the read logic so that it is easier to systematically verify
all alignment and size cases.
Reviewed by: allanjude, tsoome
MFC after: 3 months
Differential Revision: https://reviews.freebsd.org/D19140
Use recent best practices for Copyright form at the top of
the license:
1. Remove all the All Rights Reserved clauses on our stuff. Where we
piggybacked others, use a separate line to make things clear.
2. Use "Netflix, Inc." everywhere.
3. Use a single line for the copyright for grep friendliness.
4. Use date ranges in all places for our stuff.
Approved by: Netflix Legal (who gave me the form), adrian@ (pmc files)
Since the loader zfs reader does not need to read the dump zvol, we can
just enable the feature.
illumos issue #9051https://www.illumos.org/issues/9051
MFC after: 2 weeks
The reason for this change is that currently, a send/recv
takes many hours to time out.
This is suboptimal in the bootloader because it means for example
that NFS will take hours to fail before allowing subsequent access
methods such as gzip to be tried.
Setting MAXWAIT to 300 seconds (5 minutes) still allows slow
connections of 1Mb to be used to download a 30MB kernel file.
Sponsored by: Netflix
Differential Revision: https://reviews.freebsd.org/D18544
With r342151 I did fix the BIOS version of zfs_probe_dev() from accessing
the whole disk, but the fix was not complete - we actually did not check
if the device name was really for whole disk. Since UEFI version
is only calling the zfs_probe_dev() with partitions and not with whole
disk, the UEFI loader was not able to find the zfs pools.
This update does correct the issue by calling archsw.arch_getdev() to
translate the device name back to dev_desc, and we have whole disk when both
partition and slice values are -1.
Reported by: alvisen_gmail.com
Differential Revision: https://reviews.freebsd.org/D18558
First of all, normal setups can not boot such pools as the tools
do not support installing boot programs.
Secondly, for proper pool configuration detection, we need to checks all
four label copies on disk, 2 from front and 2 from the end of the disk,
but zfs label does not contain the size of the disk - so we depend on
firmware to report the correct disk size or use information from the
partition table.
Without partition table, we only can rely on firmware to report and support
disk IO properly.
There is a specific case: 8TB disks are reported by BIOS to have 4294967295
sectors (0x00000000ffffffff), the sectors reported by OS is 15628053168
(0x00000003a3812ab0), so the reported size is less than actual but is hitting
32-bit max. Unfortuantely the real limit must be even lower because probing
this disk in this system will wnd up with hung system.
UEFI boot of this system seems not to be affected.
Reviewed by: imp
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D18558
superblock has a check-hash error, an error message noting the
superblock check-hash failure is printed and the mount fails. The
administrator then runs fsck to repair the filesystem and when
successful, the filesystem can once again be mounted.
This approach fails if the filesystem in question is a root filesystem
from which you are trying to boot. Here, the loader fails when trying
to access the filesystem to get the kernel to boot. So it is necessary
to allow the loader to ignore the superblock check-hash error and make
a best effort to read the kernel. The filesystem may be suffiently
corrupted that the read attempt fails, but there is no harm in trying
since the loader makes no attempt to write to the filesystem.
Once the kernel is loaded and starts to run, it attempts to mount its
root filesystem. Once again, failure means that it breaks to its prompt
to ask where to get its root filesystem. Unless you have an alternate
root filesystem, you are stuck.
Since the root filesystem is initially mounted read-only, it is
safe to make an attempt to mount the root filesystem with the failed
superblock check-hash. Thus, when asked to mount a root filesystem
with a failed superblock check-hash, the kernel prints a warning
message that the root filesystem superblock check-hash needs repair,
but notes that it is ignoring the error and proceeding. It does
mark the filesystem as needing an fsck which prevents it from being
enabled for writing until fsck has been run on it. The net effect
is that the reboot fails to single user, but at least at that point
the administrator has the tools at hand to fix the problem.
Reported by: Rick Macklem (rmacklem@)
Discussed with: Warner Losh (imp@)
Sponsored by: Netflix
of args data between gptboot/zfsboot and loader(8).
Despite what seems like a lot of changes here, there are no actual
changes in behavior, or in the data layout in the structures involved.
This is just eliminating identical code pasted into multiple locations.
In detail, the changes are...
- Move struct zfs_boot_args definition from libsa/zfs/libzfs.h to
i386/common/bootargs.h because it is specific to x86 booting and the
handoff between zfsboot and loader, and has no relation to the zfs
library code in general.
- The geli_boot_args and zfs_boot_args structs both contain an identical
set of member variables containing geli information. Extract this out
to a new geli_boot_data struct, and embed it in the arg-passing structs.
- Provide new routines geli_import_boot_data() and geli_export_boot_data()
that can be shared between gptboot, zfsboot, and loader instead of
pasting identical code into several different .c files.
- Remove some checks for a NULL pointer that can never be true because the
pointer being tested was set using pointer math (kargs + 1) and that can
never result in NULL in this code.
ffs_subr.c requires calculate_crc32c() from libkern. Unfortunately we
cannot just add libkern/crc32.c to libstand because crc32.o is already
compiled from contrib/zlib/crc32.c. Use the include trick to rename
the source.
Note that libstand also provides crc32.c which seems to be unused.
Reviewed by: imp
Sponsored by: The FreeBSD Foundation
Differential revision: https://reviews.freebsd.org/D17677
In current tftp code we drop out-of-order packets; however, we should play
nice and re-send ACK for older data packets we are receiving. This will
hopefully stop server repeating those packets we already have received.
Note we do not answer duplicates from "previous" session (that is, session
with different port number), those will eventually time out.
Differential Revision: https://reviews.freebsd.org/D17087
The name check referred in the comment is not the only possible error source,
we need to validate the result.
Reviewed by: allanjude
Approved by: re (kib)
Differential Revision: https://reviews.freebsd.org/D17081
tftpfile is allocated just above and needs to be freed.
Reviewed by: imp
Approved by: re (kib)
Differential Revision: https://reviews.freebsd.org/D17058
It was possible in some rare circumstances for ngets to behave terribly with
bhyveload and some form of redirecting user input over a pipe.
PR: 198706
Submitted by: Ivan Krivonos <int0dster@gmail.com>
MFC after: 1 week
This moves the bulk of the geli support from lib386/biosdisk.c into a new
geli/gelidev.c which implements a devsw-type device whose dv_strategy()
function handles geli decryption. Support for all arches comes from moving
the taste-and-attach code to the devopen() function in libsa.
After opening any DEVT_DISK device, devopen() calls the new function
geli_probe_and_attach(), which will "attach" the geli code to the open_file
struct by creating a geli_devdesc instance to replace the disk_devdesc
instance in the open_file. That routes all IO for the device through the
geli code.
A new public geli_add_key() function is added, to allow arch/vendor-specific
code to add keys obtained from custom hardware or other sources.
With these changes, geli support will be compiled into all variations of
loader(8) on all arches because the default is WITH_LOADER_GELI.
Relnotes: yes
Sponsored by: Microchip Technology Inc
Differential Revision: https://reviews.freebsd.org/D15743
to it being a common name elsewhere. Rename the old kzip one
to subr_inflate.c.
This actually fixes the build issues on sparc64 that my inclusion of
.PATH ${SYSDIR}/kern created in r336244, so also revert the broken
workaround I committed in r336249.
This slipped passed me because apparently, I never did a clean build.
boot_parse_arg to parse a single arg
boot_parse_cmdline to parse a command line string
boot_parse_args to parse all the args in a vector
boot_howto_to_env Convert howto bits to env vars
boot_env_to_howto Return howto mask mased on what's set in the environment.
All these routines return an int that's the bitmask of the args
translated to RB_* flags. As a special case, the 'S' flag sets the
comconsole_speed env var. Any arg that looks like a=b will set the env
key 'a' to value 'b'. If =b is omitted, 'a' is set to '1'. This
should help us reduce the number of redundant copies of these routines
in the tree. It should also give a more uniform experience between
platforms.
Also, invent a new flag RB_PROBE that's set when 'P' is parsed. On
x86 + BIOS, this means 'probe for the keyboard, and if it's not there
set both RB_MULTIPLE and RB_SERIAL (which means show the output on
both video and serial consoles, but make serial primary). Others it
may be some similar concept of probing, but it's loader dependent
what, exactly, it means.
These routines are suitable for /boot/loader and/or the kernel,
though they may not be suitable for the tightly hand-rolled-for-space
environments like boot2.
Sponsored by: Netflix
Differential Revision: https://reviews.freebsd.org/D16205
Move the libzfs stuff into libsa. There's no need for it to be a
separate library. The separate library adds to the issues of build
ordering that we see from time to time. Move the filesystem support
into libsa, like all the other filesystem support rather than making
zfs the odd-duck out.
Discussed with: allanjude@
Reduce by 1 the number of crazy libraries we need in stand by moving
geli into libsa (where architecturally it belonged all along). This
just moves things around without any code changes.
- jhb implemented UFS write support a little over 16 years ago.
- Update the library name while we're here.
Reviewed by: jhb, rpokala
Differential Revision: https://reviews.freebsd.org/D14476
