The following config could crash pfctl:
altq on igb0 fairq bandwidth 1Gb queue { qLink }
queue qLink fairq(default)
That happens because when we're parsing the parent queue (on igb0) it
doesn't have a parent, and the check in eval_pfqueue_fairq() checks
pa->parent rather than parent.
This was changed in eval_pfqueue_hfsc() in
1d34c9dac8, but not for fairq.
Reviewed by: pkelsey
MFC after: 1 week
Sponsored by: Rubicon Communications, LLC ("Netgate")
Differential Revision: https://reviews.freebsd.org/D30346
Floating states get assigned to interface 'all' (V_pfi_all), so when we
try to flush all states for an interface states originally created
through this interface are not flushed. Only if-bound states can be
flushed in this way.
Given that we track the original interface we can check if the state's
interface is 'all', and if so compare to the orig_if instead.
MFC after: 1 week
Sponsored by: Rubicon Communications, LLC ("Netgate")
Differential Revision: https://reviews.freebsd.org/D30246
Track (and display) the interface that created a state, even if it's a
floating state (and thus uses virtual interface 'all').
MFC after: 1 week
Sponsored by: Rubicon Communications, LLC ("Netgate")
Differential Revision: https://reviews.freebsd.org/D30245
Migrate to using the new nvlist-based DIOCGETSTATESNV call to obtain the
states list.
MFC after: 1 week
Sponsored by: Rubicon Communications, LLC ("Netgate")
Differential Revision: https://reviews.freebsd.org/D30244
It's a class0 driver that implements some pcib methods and creates
a pci bus as its children.
The "ofw_pci" name will be used by a new driver that will be a subclass
of the pci bus.
No functional changes intended.
Submitted by: Kornel Duleba <mindal@semihalf.com>
Reviewed by: andrew
Obtained from: Semihalf
Sponsored by: Alstom Group
Differential Revision: https://reviews.freebsd.org/D30226
There is no need to preform any voltage reconfiguration
in case the vccq regulator is not physically attached to the
slot.
Submitted by: Lukasz Hajec <lha@semihalf.com>
Obtained from: Semihalf
Sponsored by: Alstom Group
Differential Revision: https://reviews.freebsd.org/D30355
While here, fix all links to older en_US.ISO8859-1 documentation
in the src/ tree.
PR: 255026
Reported by: Michael Büker <freebsd@michael-bueker.de>
Reviewed by: dbaio
Approved by: blackend (mentor), re (gjb)
MFC after: 10 days
Differential Revision: https://reviews.freebsd.org/D30265
API should work as following:
- periodicaly report Lower-or-EQual bandwidth (LEQ) connections
over kernel socket, if user application registered for such
per-flow notifications
- report Grater-or-EQual (GEQ) bandwidth as soon as it reaches
specified value in configured time window
Custom implementation of callouts was removed. There is no
point of doing calout-wheel here as generic callouts are
doing exactly the same. The performance is not critical
for such reporting, so the biggest concern should be
to have a code which can be easily maintained.
This is ia preparation for locking rework which is highly inefficient.
Approved by: mw
Sponsored by: Stormshield
Obtained from: Semihalf
Differential Revision: https://reviews.freebsd.org/D30210
These were seemingly copied over from icl_soft.
Reviewed by: np
Sponsored by: Chelsio Communications
Differential Revision: https://reviews.freebsd.org/D30268
I botched a few of the changes when rebasing the changes in
4b6ed0758d across the changes in
43bbae1948.
- Move the counter allocations into alloc_ofld_rxq().
- Free the counters freeing an ofld rxq.
Sponsored by: Chelsio Communications
Differential Revision: https://reviews.freebsd.org/D30267
The new Mikrotik 10/25G NIC is mostly compatible with AR8151 hardware,
with few exceptions:
* card supports only 32bit DMA operations
* card does not support write-one-to-clear semantics for interrupt status
register
* MDIO operations can take longer to complete
This patch adds support for Mikrotik 10/25G NIC to the alc driver
while maintaining support for all earlier HW.
The patch was tested with FreeBSD main branch as of commit
f4b38c360e
This was tested on Intel i7-4790K system with Mikrotik 10/25G NIC.
This was tested on Intel i7-4790K system with RB44Ge (AR8151 based 4-port NIC)
to verify backwards compatibility.
PR: 256000
Submitted by: Gatis Peisenieks <gatis@mikrotik.com>
MFC after: 1 week
The most difficult NFSv4 client recovery case happens when the
lease has expired on the server. For NFSv4.0, the client will
receive a NFSERR_EXPIRED reply from the server to indicate this
has happened.
For NFSv4.1/4.2, most RPCs have a Sequence operation and, as such,
the client will receive a NFSERR_BADSESSION reply when the lease
has expired for these RPCs. The client will then call nfscl_recover()
to handle the NFSERR_BADSESSION reply. However, for the expired lease
case, the first reclaim Open will fail with NFSERR_NOGRACE.
This patch recognizes this case and calls nfscl_expireclient()
to handle the recovery from an expired lease.
This patch only affects NFSv4.1/4.2 mounts when the lease
expires on the server, due to a network partitioning that
exceeds the lease duration or similar.
MFC after: 2 weeks
Pass 1b of fsck_ffs runs only when Pass 1 has found duplicate blocks.
Pass 1 only knows that a block is duplicate when it finds the second
instance of its use. The role of Pass 1b is to find the first use
of all the duplicate blocks. It makes a pass over the cylinder groups
looking for these blocks. When moving to the next cylinder group,
Pass 1b failed to properly calculate the starting inode number for
the cylinder group resulting in the above error message when it
tried to read the first inode in the cylinder group.
Reported by: Px
Tested by: Px
PR: 255979
MFC after: 3 days
Sponsored by: Netflix
Remove makefiles, configure files and unused at build time files
to reduce the diff size. Otherwise the diff contains a lot of
unnecessary lines what makes reviewing and merging proccess so hard,
especially for re@.
MFC after: 2 weeks
On Linux, there's a similar set of programs to ours, but that end in the
letters 'sum'. These act basically like FreeBSD versions run with the -r
option. Add code so that when the program ends in 'sum' you get the
linux -r behavior. This is enough to make most things that use sha*sum
work correctly (the -c / --check options, as well as the long args are
not implemented). When running with the -sum programs, ignore -t instead
of running internal speed tests and make -c an error.
Reviewed by: sef, and kp and allanjude (earlier version)
Relnotes: yes
Sponsored by: Netflix
Differential Revision: https://reviews.freebsd.org/D30309
Each packet is counted as 128 bytes by the code, not 125. Not sure
what I was thinking about here 14 years ago. May be just a typo.
Reported by: Dmitry Luhtionov <dmitryluhtionov@gmail.com>
MFC after: 2 weeks
/etc/rc.d/securelevel is supposed to run /etc/rc.d/sysctl lastload
late at boot time to apply /etc/sysctl.conf settings that fail
to apply early. However, this does not work in default configuration
because of kern_securelevel_enable="NO" by default.
Add new script /etc/rc.d/sysctl lastload that starts unconditionally.
Reported by: Marek Zarychta
MFC after: 1 month
While the xin32k clk was implemented in rk3399_cru as a fixed rate
clock, migrate it to rk805 as we will also need the 2nd clock
'rtc_clko_wifi' for SDIO and BT.
Both clocks remain fixed rate, and while the 1st one is always on
(though that is not expressed in the clk framework), the 2nd one
we can toggle on/off.
Reviewed-by: manu
Tested-by: manu
MFC-after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D26870
Recent discussion on the nfsv4@ietf.org mailing list confirmed
that an NFSv4 server should reply to an RPC in less than 1second.
If an NFSv4 RPC requires a delegation be recalled,
the server will attempt a CB_RECALL callback.
If the client is not responsive, the RPC reply will be delayed
until the callback times out.
Without this patch, the timeout is set to 4 seconds (set in
ticks, but used as seconds), resulting in the RPC reply taking over 4sec.
This patch redefines the constant as being in milliseconds and it
implements that for a value of 800msec, to ensure the RPC
reply is sent in less than 1second.
This patch only affects mounts from clients when delegations
are enabled on the server and the client is unresponsive to callbacks.
MFC after: 2 weeks
The Linux NFSv4.1/4.2 client now uses the CLAIM_DELEG_CUR_FH
variant of the Open operation when delegations are recalled and
the client has a local open of the file. This patch adds
support for this variant of Open to the NFSv4.1/4.2 server.
This patch only affects mounts from Linux clients when delegations
are enabled on the server.
MFC after: 2 weeks
The current implement of ip_input() reject packets destined for
169.254.0.0/16, but not those original from 169.254.0.0/16 link-local
addresses.
Fix to fully respect RFC 3927 section 2.7.
PR: 255388
Reviewed by: donner, rgrimes, karels
MFC after: 1 month
Differential Revision: https://reviews.freebsd.org/D29968
Once the final component of the IP address has been parsed, the offset
on the input must not be advanced, as this would remove an unparsed
character from the input.
Submitted by: Markus Stoff
Reviewed by: donner
MFC after: 3 weeks
Differential Revision: https://reviews.freebsd.org/D26489
In order to modify libalias for performance, the existing
functionality must not change. Enforce this.
Reviewed by: kp
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D30307
We dereference so->so_cred to update the per-uid socket buffer
accounting, so the crfree() call must be deferred until after that
point.
PR: 255869
MFC after: 1 week
Since busy state is checked by all blocked writes, stopping a process
which waits in ttydisc_write() causes cascade. Utilize sigdeferstop()
to avoid the issue.
Submitted by: Jakub Piecuch <j.piecuch96@gmail.com>
PR: 255816
MFC after: 1 week
behind USB HUBs are detected and the USB reset counter logic will kick in
preventing enumeration of continuously failing ports.
Submitted by: phk@
Tested by: bz@
PR: 237666
MFC after: 1 week
Sponsored by: Mellanox Technologies // NVIDIA Networking
says it should be max 10 milliseconds.
This may fix some USB enumeration issues:
> usbd_req_re_enumerate: addr=3, set address failed! (USB_ERR_IOERROR, ignored)
> usbd_setup_device_desc: getting device descriptor at addr 3 failed,
Found by: Zhichao1.Li@dell.com
MFC after: 1 week
Sponsored by: Mellanox Technologies // NVIDIA Networking
0 milliseconds and 2 seconds inclusivly. Some style fixes while at it.
The USB specification has minimum values and maximum values,
and not only minimum values.
MFC after: 1 week
Sponsored by: Mellanox Technologies // NVIDIA Networking
The AP startup extern variable declarations are not longer needed,
since PVHv2 uses the native AP startup path using the lapic. Remove
the declaration and make the variables static to mp_machdep.c
Sponsored by: Citrix Systems R&D
