1600 Commits

Author SHA1 Message Date
tuexen
c2c8b26056 Don't consider the socket when processing an incoming ICMP/ICMP6 packet,
which was triggered by an SCTP packet. Whether a socket exists, is just
not relevant.

Approved by: re (kib)
MFC after: 1 week
2016-06-23 09:13:15 +00:00
ae
7cdbaef028 Fix the NULL pointer dereference for unresolved link layer entries in
the netinet6 code. Copy link layer address only when corresponding entry
has LLE_VALID flag.

PR:		210379
Approved by:	re (kib)
2016-06-22 11:29:21 +00:00
bz
7a1c0b1ad1 Get closer to a VIMAGE network stack teardown from top to bottom rather
than removing the network interfaces first. This change is rather larger
and convoluted as the ordering requirements cannot be separated.

Move the pfil(9) framework to SI_SUB_PROTO_PFIL, move Firewalls and
related modules to their own SI_SUB_PROTO_FIREWALL.
Move initialization of "physical" interfaces to SI_SUB_DRIVERS,
move virtual (cloned) interfaces to SI_SUB_PSEUDO.
Move Multicast to SI_SUB_PROTO_MC.

Re-work parts of multicast initialisation and teardown, not taking the
huge amount of memory into account if used as a module yet.

For interface teardown we try to do as many of them as we can on
SI_SUB_INIT_IF, but for some this makes no sense, e.g., when tunnelling
over a higher layer protocol such as IP. In that case the interface
has to go along (or before) the higher layer protocol is shutdown.

Kernel hhooks need to go last on teardown as they may be used at various
higher layers and we cannot remove them before we cleaned up the higher
layers.

For interface teardown there are multiple paths:
(a) a cloned interface is destroyed (inside a VIMAGE or in the base system),
(b) any interface is moved from a virtual network stack to a different
network stack ("vmove"), or (c) a virtual network stack is being shut down.
All code paths go through if_detach_internal() where we, depending on the
vmove flag or the vnet state, make a decision on how much to shut down;
in case we are destroying a VNET the individual protocol layers will
cleanup their own parts thus we cannot do so again for each interface as
we end up with, e.g., double-frees, destroying locks twice or acquiring
already destroyed locks.
When calling into protocol cleanups we equally have to tell them
whether they need to detach upper layer protocols ("ulp") or not
(e.g., in6_ifdetach()).

Provide or enahnce helper functions to do proper cleanup at a protocol
rather than at an interface level.

Approved by:		re (hrs)
Obtained from:		projects/vnet
Reviewed by:		gnn, jhb
Sponsored by:		The FreeBSD Foundation
MFC after:		2 weeks
Differential Revision:	https://reviews.freebsd.org/D6747
2016-06-21 13:48:49 +00:00
pfg
0f12e1993e Remove the SIOCSIFALIFETIME_IN6 ioctl.
The SIOCSIFALIFETIME_IN6 provided by the kame project is unused,
it can't really be used safely and has been completely removed from
NetBSD and OpenBSD.

Obtained from:	NetBSD (kern/35897)
PR:		210148 (exp-run)
Reviewed by:	ae, hrs
Relnotes:	yes
Approved by:	re (glebius)
Differential Revision:	https://reviews.freebsd.org/D5491
2016-06-13 22:31:16 +00:00
ae
48b268cd67 Cleanup unneded include "opt_ipfw.h".
It was used for conditional build IPFIREWALL_FORWARD support.
But IPFIREWALL_FORWARD option was removed a long time ago.
2016-06-09 05:48:34 +00:00
bz
5baf25edd0 Make KASSERT message more useful by printing the variables on which
we assert.

Obtained from:	projects/vnet
MFC after:	2 weeks
Sponsored by:	The FreeBSD Foundation
2016-06-06 22:34:12 +00:00
bz
aaac6c5a13 Move the callout_reset() to the end of the work not having it stick
before we do anything.

Obtained from:	projects/vnet
MFC after:	2 week
Sponsored by:	The FreeBSD Foundation
2016-06-06 14:01:09 +00:00
bz
69cdb2137c Introduce a per-VNET flag to enable/disable netisr prcessing on that VNET.
Add accessor functions to toggle the state per VNET.
The base system (vnet0) will always enable itself with the normal
registration. We will share the registered protocol handlers in all
VNETs minimising duplication and management.
Upon disabling netisr processing for a VNET drain the netisr queue from
packets for that VNET.

Update netisr consumers to (de)register on a per-VNET start/teardown using
VNET_SYS(UN)INIT functionality.

The change should be transparent for non-VIMAGE kernels.

Reviewed by:	gnn (, hiren)
Obtained from:	projects/vnet
MFC after:	2 weeks
Sponsored by:	The FreeBSD Foundation
Differential Revision:	https://reviews.freebsd.org/D6691
2016-06-03 13:57:10 +00:00
gnn
d75e0c471e This change re-adds L2 caching for TCP and UDP, as originally added in D4306
but removed due to other changes in the system. Restore the llentry pointer
to the "struct route", and use it to cache the L2 lookup (ARP or ND6) as
appropriate.

Submitted by:	Mike Karels
Differential Revision:	https://reviews.freebsd.org/D6262
2016-06-02 17:51:29 +00:00
markj
8b17712ca6 Exploit r301213 to fix in6 ifaddr locking in pfxlist_onlink_check().
Reviewed by:	ae, hrs
MFC after:	2 weeks
Differential Revision:	https://reviews.freebsd.org/D6639
2016-06-02 17:21:57 +00:00
markj
71ff51c027 Always start IPv6 DAD asynchronously.
Otherwise we transmit the first neighbour solicitation in the context of the
caller of nd6_dad_start(), which can easily result in lock recursion. When
DAD is to be started after some delay, we send the first NS from the DAD
callout handler, so just change the implementation to do this in the
non-delayed case as well.

Reviewed by:	ae, hrs
MFC after:	2 weeks
Differential Revision:	https://reviews.freebsd.org/D6639
2016-06-02 17:17:15 +00:00
bz
fac944a70a The pr_destroy field does not allow us to run the teardown code in a
specific order.  VNET_SYSUNINITs however are doing exactly that.
Thus remove the VIMAGE conditional field from the domain(9) protosw
structure and replace it with VNET_SYSUNINITs.
This also allows us to change some order and to make the teardown functions
file local static.
Also convert divert(4) as it uses the same mechanism ip(4) and ip6(4) use
internally.

Slightly reshuffle the SI_SUB_* fields in kernel.h and add a new ones, e.g.,
for pfil consumers (firewalls), partially for this commit and for others
to come.

Reviewed by:		gnn, tuexen (sctp), jhb (kernel.h)
Obtained from:		projects/vnet
MFC after:		2 weeks
X-MFC:			do not remove pr_destroy
Sponsored by:		The FreeBSD Foundation
Differential Revision:	https://reviews.freebsd.org/D6652
2016-06-01 10:14:04 +00:00
tuexen
525f16040f Add PR_CONNREQUIRED for SOCK_STREAM sockets using SCTP.
This is required to signal connetion setup on non-blocking sockets
via becoming writable. This still allows for implicit connection
setup.

MFC after:	1 week
2016-05-30 18:24:23 +00:00
glebius
bbfa6d2853 Plug route reference underleak that happens with FLOWTABLE after r297225.
Submitted by:	Mike Karels <mike karels.net>
2016-05-27 17:31:02 +00:00
markj
9cb221bdb0 Mark the prefix and default router list sysctl handlers MPSAFE.
MFC after:	2 weeks
2016-05-23 20:18:11 +00:00
markj
86c15ee95b Acquire the nd6 lock in the prefix list sysctl handler.
The nd6 lock will be used to synchronize access to the NDP prefix list.

MFC after:	2 weeks
Tested by:	Jason Wolfe (as part of a larger change)
2016-05-23 20:15:08 +00:00
ae
78161c3462 Remove ip6 adjusting from the place where pointer couldn't be changed.
And add comment after calling PFIL hooks, where it could be changed.
2016-05-20 12:17:40 +00:00
ae
eef5384953 Remove ip6 pointer initialization and strange check from the beginning
of ip6_output(). It isn't used until the first time adjusted.
Remove the comment about adjusting where it is actually initialized.
2016-05-20 12:09:10 +00:00
markj
a09fd6097b Move IPv6 malloc tag definitions into the IPv6 code. 2016-05-20 04:45:08 +00:00
ae
0412106b46 Since PFIL can change destination address, use its always actual value
from mbuf when calculating path mtu. Remove now unused finaldst variable.
Also constify dst argument in ip6_getpmtu() and ip6_getpmtu_ctl().

Reviewed by:	melifaro
Obtained from:	Yandex LLC
Sponsored by:	Yandex LLC
2016-05-19 12:45:20 +00:00
ae
d1f53cbfea Call RO_RTFREE() when we have detected the change of destination
address, otherwise the old route will be used with new destination.

MFC after:	1 week
2016-05-17 14:06:55 +00:00
markj
a0640b8262 Use Node Information flag names instead of hard-coding their values.
MFC after:	1 week
2016-05-15 03:22:13 +00:00
markj
43beb421e5 Add sysctl descriptions for net.inet6.ip6 and net.inet6.icmp6.
icmp6.redirtimeout, icmp6.nd6_maxnudhint and ip6.rr_prune are left
undocumented as they appear to have no effect. Some existing sysctl
descriptions were modified for consistency and style, and the
ip6.tempvltime and ip6.temppltime handlers were rewritten to be a bit
simpler and to avoid setting the sysctl value before validating it.

MFC after:	3 weeks
2016-05-15 03:18:03 +00:00
markj
c5c6630f07 Remove an always-false error check in the AIFADDR_IN6 handler.
CID:		1250792
MFC after:	1 week
2016-05-15 03:01:40 +00:00
markj
4b9a93dfb3 Remove obsolescent comments from nd6_purge().
MFC after:	1 week
2016-05-09 23:43:12 +00:00
markj
94a1c25725 Clean up callers of nd6_prelist_add().
nd6_prelist_add() sets *newp if and only if it is successful, so there's no
need for code that handles the case where the return value is 0 and
*newp == NULL. Fix some style bugs in nd6_prelist_add() while here.

MFC after:	1 week
2016-05-07 03:41:29 +00:00
markj
557551b31f Remove two useless local variables from prelist_update().
MFC after:	1 week
2016-05-07 03:32:29 +00:00
pfg
d9c9113377 sys/net*: minor spelling fixes.
No functional change.
2016-05-03 18:05:43 +00:00
tuexen
a750782f5b When a client uses UDP encapsulation and lists IP addresses in the INIT
chunk, enable UDP encapsulation for all those addresses.
This helps clients using a userland stack to support multihoming if
they are not behind a NAT.

MFC after: 1 week
2016-05-01 21:48:55 +00:00
tuexen
3e7292aa0b Use correct order of source and destination address and port. 2016-04-29 20:13:35 +00:00
rrs
64e463c093 Complete the UDP tunneling of ICMP msgs to those protocols
interested in having tunneled UDP and finding out about the
ICMP (tested by Michael Tuexen with SCTP.. soon to be using
this feature).

Differential Revision:	http://reviews.freebsd.org/D5875
2016-04-28 15:53:10 +00:00
cem
23a478288f in_lltable_alloc and in6 copy: Don't leak LLE in error path
Fix a memory leak in error conditions introduced in r292978.

Reported by:	Coverity
CIDs:		1347009, 1347010
Sponsored by:	EMC / Isilon Storage Division
2016-04-26 23:13:48 +00:00
loos
cfc8d71705 Fixes the comment to reflect the code.
Sponsored by:	Rubicon Communications (Netgate)
2016-04-25 23:12:39 +00:00
pfg
32dcf3933a Indentation issues.
Contract some lines leftover from r298310.

Mea culpa.
2016-04-20 16:19:44 +00:00
pfg
a7d40a88c9 kernel: use our nitems() macro when it is available through param.h.
No functional change, only trivial cases are done in this sweep,

Discussed in:	freebsd-current
2016-04-19 23:48:27 +00:00
tuexen
f78898772a Address issues found by the XCode code analyzer. 2016-04-18 20:16:41 +00:00
tuexen
42159e8af3 Fix the ICMP6 handling for SCTP.
Keep the IPv4 code in sync.

MFC after:	1 week
2016-04-16 21:34:49 +00:00
pfg
12232f8463 sys/net* : for pointers replace 0 with NULL.
Mostly cosmetical, no functional change.

Found with devel/coccinelle.
2016-04-15 17:30:33 +00:00
ae
3f81fe2ce0 Fix regression introduced in r296986.
Currently we don't keep zoneid in in6_ifaddr structure, because there
is still some code, that doesn't properly initialize sin6_scope_id,
but some functions use sa_equal() for addresses comparison. sa_equal()
compares full sockaddr_in6 structures and such comparison will fail.
For now use zero zoneid in in6ifa_ifwithaddr(). It is safe, because
used address is in embedded form. In future we will use zoneid, so mark it
with XXX comment.

Reported by:	kp
Tested by:	kp
2016-04-08 11:13:24 +00:00
gnn
43026a8c5f Unbreak the RSS/PCBGROUp build. 2016-03-31 00:53:23 +00:00
markj
4081472216 Fix the lladdr copy in in6_lltable_dump_entry() after r292978.
This bug caused "ndp -a" to show the wrong link layer address for neighbour
cache entries.

PR:	208067
2016-03-30 00:03:59 +00:00
markj
db6b45eb6c Modify nd6_llinfo_timer() to acquire the nd6 lock before the LLE lock.
When expiring a neighbour cache entry we may need to look up the associated
default router, which requires the nd6 read lock. To avoid an LOR, the nd6
lock should be acquired first.

X-MFC-With:	r296063
Tested by:	Larry Rosenman <ler@lerctr.org> (previous revision)
2016-03-29 19:23:00 +00:00
gnn
c3d5404bbe FreeBSD previously provided route caching for TCP (and UDP). Re-add
route caching for TCP, with some improvements. In particular, invalidate
the route cache if a new route is added, which might be a better match.
The cache is automatically invalidated if the old route is deleted.

Submitted by:	Mike Karels
Reviewed by:	gnn
Differential Revision:	https://reviews.freebsd.org/D4306
2016-03-24 07:54:56 +00:00
bz
d4cf530887 Mfp4 @180378:
Factor out nd6 and in6_attach initialization to their own files.
  Also move destruction into those files though still called from
  the central initialization.

  Sponsored by:	CK Software GmbH
Sponsored by:	The FreeBSD Foundation
MFC after:	2 weeks
Reviewed by:	gnn
Differential Revision:	https://reviews.freebsd.org/D5033
2016-03-22 15:43:47 +00:00
markj
8c873a2b1b Modify defrouter_remove() to perform the router lookup before removal.
This allows some simplification of its callers. No functional change
intended.

Tested by:	Larry Rosenman (as part of a larger change)
MFC after:	1 month
2016-03-17 19:01:44 +00:00
ae
2d399eaa6e Reduce the number of local variables. Remove redundant check that inp
pointer isn't NULL, it is safe, because we are handling IPV6_PKTINFO
socket option in this block of code. Also, use in6ifa_withaddr() instead
of ifa_withaddr().
2016-03-17 11:10:44 +00:00
ae
a3a4fe0039 Change in6_selectsrc() to allow usage of non-local IPv6 addresses in
IPV6_PKTINFO ancillary data when IPV6_BINDANY socket option is set.

Submitted by:	n_hibma
MFC after:	2 weeks
2016-03-17 10:59:30 +00:00
glebius
163857deb4 New way to manage reference counting of mbuf external storage.
The m_ext.ext_cnt pointer becomes a union. It can now hold the refcount
value itself. To tell that m_ext.ext_flags flag EXT_FLAG_EMBREF is used.
The first mbuf to attach a cluster stores the refcount. The further mbufs
to reference the cluster point at refcount in the first mbuf. The first
mbuf is freed only when the last reference is freed.

The benefit over refcounts stored in separate slabs is that now refcounts
of different, unrelated mbufs do not share a cache line.

For EXT_EXTREF mbufs the zone_ext_refcnt is no longer needed, and m_extadd()
becomes void, making widely used M_EXTADD macro safe.

For EXT_SFBUF mbufs the sf_ext_ref() is removed, which was an optimization
exactly against the cache aliasing problem with regular refcounting.

Discussed with:		rrs, rwatson, gnn, hiren, sbruno, np
Reviewed by:		rrs
Differential Revision:	https://reviews.freebsd.org/D5396
Sponsored by:		Netflix
2016-03-01 00:17:14 +00:00
markj
9524b1b571 Lock the NDP default router list and count defrouter references.
This addresses a number of race conditions that can cause crashes as a
result of unsynchronized access to the list.

PR:		206904
Tested by:	Larry Rosenman <ler@lerctr.org>,
		Kevin Bowling <kevin.bowling@kev009.com>
MFC after:	2 months
Differential Revision: https://reviews.freebsd.org/D5315
2016-02-25 20:12:05 +00:00
tuexen
63d9199ac6 Don't leak an address in an error path.
CID:		1351729
MFC after:	3 days
2016-02-23 18:50:34 +00:00