in devfs if a particular race condition is hit in the device pager
code.
This was a side effect of change 227530 which changed the device
pager interface to call a new destructor routine for the cdev.
That destructor routine, old_dev_pager_dtor(), takes a VM object
handle.
The object handle is cast to a struct cdev *, and passed into
dev_rel().
That works in most cases, except the case in cdev_pager_allocate()
where there is a race condition between two threads allocating an
object backed by the same device. The loser of the race
deallocates its object at the end of the function.
The problem is that before inserting the object into the
dev_pager_object_list, the object's handle is changed from the
struct cdev pointer to the object's own address. This is to avoid
conflicts with the winner of the race, which already inserted an
object in the list with a handle that is a pointer to the same cdev
structure.
The object is then passed to vm_object_deallocate(), and eventually
makes its way down to old_dev_pager_dtor(). That function passes
the handle pointer (which is actually a VM object, not a struct
cdev as usual) into dev_rel(). dev_rel() decrements the reference
count in the assumed struct cdev (which happens to be 0), and
that triggers the assertion in dev_rel() that the reference count
is greater than or equal to 0.
The fix is to add a cdev pointer to the VM object, and use that
pointer when calling the cdev_pg_dtor() routine.
vm_object.h: Add a struct cdev pointer to the VM object
structure.
device_pager.c: In cdev_pager_allocate(), populate the new cdev
pointer.
In dev_pager_dealloc(), use the new cdev pointer
when calling the object's cdev_pg_dtor() routine.
Reviewed by: kib
Sponsored by: Spectra Logic Corporation
MFC after: 1 week
similar changes had to be made in various places throughout the machine-
independent virtual memory layer to support the new vm object type.
However, in most of these places, it's actually not the type of the vm
object that matters to us but instead certain attributes of its pages.
For example, OBJT_DEVICE, OBJT_MGTDEVICE, and OBJT_SG objects contain
fictitious pages. In other words, in most of these places, we were
testing the vm object's type to determine if it contained fictitious (or
unmanaged) pages.
To both simplify the code in these places and make the addition of future
vm object types easier, this change introduces two new vm object flags
that describe attributes of the vm object's pages, specifically, whether
they are fictitious or unmanaged.
Reviewed and tested by: kib
will be printed once the given zone becomes full and cannot allocate an
item. The warning will not be printed more often than every five minutes.
All UMA warnings can be globally turned off by setting sysctl/tunable
vm.zone_warnings to 0.
Discussed on: arch
Obtained from: WHEEL Systems
MFC after: 2 weeks
Add detail to the comment describing this function. In particular,
describe what MAP_PREFAULT_PARTIAL does.
Eliminate the abrupt change in behavior when the specified address range
grows from MAX_INIT_PT pages to MAX_INIT_PT plus one pages. Instead of
doing nothing, i.e., preloading no mappings whatsoever, map any resident
pages that fall within the start of the specified address range, i.e.,
[addr, addr + ulmin(size, ptoa(MAX_INIT_PT))).
Long ago, the vm object's list of resident pages was not ordered, so
this function had to choose between probing the global hash table of
all resident pages and iterating over the vm object's unordered list of
resident pages. Now, the list is ordered, so there is no reason for
MAP_PREFAULT_PARTIAL to be concerned with the vm object's count of
resident changes.
MFC after: 14 days
sleep, and perform the page allocations with VM_ALLOC_SYSTEM
class. Previously, the allocation was also allowed to completely drain
the reserve of the free pages, being translated to VM_ALLOC_INTERRUPT
request class for vm_page_alloc() and similar functions.
Allow the caller of malloc* to request the 'deep drain' semantic by
providing M_USE_RESERVE flag, now translated to VM_ALLOC_INTERRUPT
class. Previously, it resulted in less aggressive VM_ALLOC_SYSTEM
allocation class.
Centralize the translation of the M_* malloc(9) flags in the single
inline function malloc2vm_flags().
Discussion started by: "Sears, Steven" <Steven.Sears@netapp.com>
Reviewed by: alc, mdf (previous version)
Tested by: pho (previous version)
MFC after: 2 weeks
- Check that an argument is always available, otherwise current map
printing before to recurse is garbage.
- Spit out a message if an argument is not provided.
- Remove unread nlines variable.
- Use an explicit recursive function, disassociated from the
DB_SHOW_COMMAND() body, in order to make clear prototype and recursion
of the above mentioned function. The code results now much less
obscure.
Submitted by: gianni
was still possible to open for write from the lower filesystem. There
is a symmetric situation where the binary could already has file
descriptors opened for write, but it can be executed from the nullfs
overlay.
Handle the issue by passing one v_writecount reference to the lower
vnode if nullfs vnode has non-zero v_writecount. Note that only one
write reference can be donated, since nullfs only keeps one use
reference on the lower vnode. Always use the lower vnode v_writecount
for the checks.
Introduce the VOP_GET_WRITECOUNT to read v_writecount, which is
currently always bypassed to the lower vnode, and VOP_ADD_WRITECOUNT
to manipulate the v_writecount value, which manages a single bypass
reference to the lower vnode. Caling the VOPs instead of directly
accessing v_writecount provide the fix described in the previous
paragraph.
Tested by: pho
MFC after: 3 weeks
the call to pmap_remove_all() within vm_page_cache() is usually redundant.
This change eliminates that call to pmap_remove_all() and introduces a
call to pmap_remove_all() before vm_page_cache() in the one place where
it didn't already exist.
When iterating over a paging queue, if the object containing the current
page has a zero reference count, then the page can't have any managed
mappings. So, a call to pmap_remove_all() is pointless.
Change a panic() call in vm_page_cache() to a KASSERT().
MFC after: 6 weeks
cache line in order to avoid manual frobbing but using
struct mtx_padalign.
The sole exception being nvme and sxfge drivers, where the author
redefined CACHE_LINE_SIZE manually, so they need to be analyzed and
dealt with separately.
Reviwed by: jimharris, alc
because the queue itself serves no purpose. When a held page is freed,
inserting the page into the hold queue has the side effect of setting the
page's "queue" field to PQ_HOLD. Later, when the page is unheld, it will
be freed because the "queue" field is PQ_HOLD. In other words, PQ_HOLD is
used as a flag, not a queue. So, this change replaces it with a flag.
To accomodate the new page flag, make the page's "flags" field wider and
"oflags" field narrower.
Reviewed by: kib
forked. Otherwise, pagedaemon might reclaim the page without saving
its content into the swap file, resulting in the valid content
replaced by zeroes.
Reported and tested by: pho
Reviewed and comment update by: alc
MFC after: 1 week
In particular, do not lock Giant conditionally when calling into the
filesystem module, remove the VFS_LOCK_GIANT() and related
macros. Stop handling buffers belonging to non-mpsafe filesystems.
The VFS_VERSION is bumped to indicate the interface change which does
not result in the interface signatures changes.
Conducted and reviewed by: attilio
Tested by: pho
vm_page_sleep(). vm_page_sleep() is no longer called with this lock
held.
Eliminate assertions that the page queues lock is NOT held. These
assertions won't translate well to having distinct locks on the active
and inactive page queues, and they really aren't that useful.
MFC after: 3 weeks
Update some of the comments. In particular, use "sleep" in preference to
"block" where appropriate.
Eliminate some unnecessary casts.
Make a few whitespace changes for consistency.
Reviewed by: kib
MFC after: 3 days
If you have a binary on a filesystem which is also mounted over by
nullfs, you could execute the binary from the lower filesystem, or
from the nullfs mount. When executed from lower filesystem, the lower
vnode gets VV_TEXT flag set, and the file cannot be modified while the
binary is active. But, if executed as the nullfs alias, only the
nullfs vnode gets VV_TEXT set, and you still can open the lower vnode
for write.
Add a set of VOPs for the VV_TEXT query, set and clear operations,
which are correctly bypassed to lower vnode.
Tested by: pho (previous version)
MFC after: 2 weeks
queues lock is acquired before the page lock is released, there is no
guarantee that the page will still be in that same page queue when
vm_page_requeue() is called.
Reported by: pho
In collaboration with: kib
MFC after: 3 days
is performed on the vnode mapping which is wired in other address space.
While there, explicitely assert that the page is unwired and zero the
wire_count instead of substract. The condition is rechecked later in
vm_page_free(_toq) already.
Reported and tested by: zont
Reviewed by: alc (previous version)
MFC after: 1 week
