one which runs the actual update. This fixes a bug where there were
a delay in applying the frequency adjustment. In extreme cases this
could result in marginal stability of the kernel-pll.
incremented at the start of the leap second, not after the leap second
has been inserted. This is because at the start of the leap second,
we set the time back one second. This setting back one second is the
moment that the offset changes. The old code set it back after the
leap second, but that's one second too late. The negative leap second
case is handled correctly.
Reviewed by: phk
called. Otherwise (depending on a non-deterministic sort), the timecounter
code can be initialized before the clock rate has been set (on ia64) and it
assumes hz = 100, rather than the real value of 1024. I'm not sure how much
gets upset by this.
Glanced at by: phk
Apply the change as a continuous slew rather than as a series of
discrete steps and make it possible to adjust arbitraryly huge
amounts of time in either direction.
In practice this is done by hooking into the same once-per-second
loop as the NTP PLL and setting a suitable frequency offset deducting
the amount slewed from the remainder. If the remaining delta is
larger than 1 second we slew at 5000PPM (5msec/sec), for a delta
less than a second we slew at 500PPM (500usec/sec) and for the last
one second period we will slew at whatever rate (less than 500PPM)
it takes to eliminate the delta entirely.
The old implementation stepped the clock a number of microseconds
every HZ to acheive the same effect, using the same rates of change.
Eliminate the global variables tickadj, tickdelta and timedelta and
their various use and initializations.
This removes the most significant obstacle to running timecounter and
NTP housekeeping from a timeout rather than hardclock.
general cleanup of the API. The entire API now consists of two functions
similar to the pre-KSE API. The suser() function takes a thread pointer
as its only argument. The td_ucred member of this thread must be valid
so the only valid thread pointers are curthread and a few kernel threads
such as thread0. The suser_cred() function takes a pointer to a struct
ucred as its first argument and an integer flag as its second argument.
The flag is currently only used for the PRISON_ROOT flag.
Discussed on: smp@
The binary format "bintime" is a 32.64 format, it will go to 64.64
when time_t does.
The bintime format is available to consumers of time in the kernel,
and is preferable where timeintervals needs to be accumulated.
This change simplifies much of the magic math inside the timecounters
and improves the frequency and time precision by a couple of bits.
I have not been able to measure a performance difference which was not
a tiny fraction of the standard deviation on the measurements.
Note ALL MODULES MUST BE RECOMPILED
make the kernel aware that there are smaller units of scheduling than the
process. (but only allow one thread per process at this time).
This is functionally equivalent to teh previousl -current except
that there is a thread associated with each process.
Sorry john! (your next MFC will be a doosie!)
Reviewed by: peter@freebsd.org, dillon@freebsd.org
X-MFC after: ha ha ha ha
Make the public interface more systematically named.
Remove the alternate method, it doesn't do any good, only ruins performance.
Add counters to profile the usage of the 8 access functions.
Apply the beer-ware to my code.
The weird +/- counts are caused by two repocopies behind the scenes:
kern/kern_clock.c -> kern/kern_tc.c
sys/time.h -> sys/timetc.h
(thanks peter!)
hardpps() produced offset component. This is tested and behaved
stable with frequency offsets from -338.05 to +499.91 PPM.
Interestingly the machine I tested this on would fail if the clock
were slower than 14.3132 MHz whereas it was perfectly happy to run
at 16.384 MHz, in other words [-340PPM ... +14.4%]
Make pps_shift tweakable with sysctl.
resulted in vastly optimistic offset values reported to userland
(typically a factor 40+ too small). Apart from that, the code had
two sign-bugs.
Apply the hardpps() phase with the right sign with a simply
scaling by integration interval. (This may be too stiff at
long integration intervals, see below).
Allow pps_shiftmax to be reduced again.
Before this, the phase lock in hardpps() were broken, but due to
two bugs mostly cancelling out, it would end up basically working
with a large stochastic component. Now it behaves as one would
expect: smooth and quiet.
It seems that pps_shiftmax above 7..9 somewhere makes the phaselock
too weak to hold onto random walk phase errors from a HP-105 OCXO,
which basically means that it is too weak for real-life use with
such integration times. This is yet to be resolved.
Submitted to: Prof. Dave "NTP" Mills.
Tested by: Terje Mathisen <Terje.Mathisen@hda.hydro.com>
1:
s/suser/suser_xxx/
2:
Add new function: suser(struct proc *), prototyped in <sys/proc.h>.
3:
s/suser_xxx(\([a-zA-Z0-9_]*\)->p_ucred, \&\1->p_acflag)/suser(\1)/
The remaining suser_xxx() calls will be scrutinized and dealt with
later.
There may be some unneeded #include <sys/cred.h>, but they are left
as an exercise for Bruce.
More changes to the suser() API will come along with the "jail" code.
This code is backwards compatible with the older "microkernel" PLL, but
allows ntpd v4 to use nanosecond resolution. Many other improvements.
PPS_SYNC and hardpps() are NOT supported yet.
"time" wasn't a atomic variable, so splfoo() protection were needed
around any access to it, unless you just wanted the seconds part.
Most uses of time.tv_sec now uses the new variable time_second instead.
gettime() changed to getmicrotime(0.
Remove a couple of unneeded splfoo() protections, the new getmicrotime()
is atomic, (until Bruce sets a breakpoint in it).
A couple of places needed random data, so use read_random() instead
of mucking about with time which isn't random.
Add a new nfs_curusec() function.
Mark a couple of bogosities involving the now disappeard time variable.
Update ffs_update() to avoid the weird "== &time" checks, by fixing the
one remaining call that passwd &time as args.
Change profiling in ncr.c to use ticks instead of time. Resolution is
the same.
Add new function "tvtohz()" to avoid the bogus "splfoo(), add time, call
hzto() which subtracts time" sequences.
Reviewed by: bde
Highlights:
* Simple model for underlying hardware.
* Hardware basis for timekeeping can be changed on the fly.
* Only one hardware clock responsible for TOD keeping.
* Provides a real nanotime() function.
* Time granularity: .232E-18 seconds.
* Frequency granularity: .238E-12 s/s
* Frequency adjustment is continuous in time.
* Less overhead for frequency adjustment.
* Improves xntpd performance.
Reviewed by: bde, bde, bde
it in struct proc instead.
This fixes a boatload of compiler warning, and removes a lot of cruft
from the sources.
I have not removed the /*ARGSUSED*/, they will require some looking at.
libkvm, ps and other userland struct proc frobbing programs will need
recompiled.
Move a lot of variables home to their own code (In good time before xmas :-)
Introduce the string descrition of format.
Add a couple more functions to poke into these marvels, while I try to
decide what the correct interface should look like.
Next is adding vars on the fly, and sysctl looking at them too.
Removed a tine bit of defunct and #ifdefed notused code in swapgeneric.
structs and prototypes for syscalls.
Ifdefed duplicated decentralized declarations of args structs. It's
convenient to have this visible but they are hard to maintain. Some
are already different from the central declarations. 4.4lite2 puts
them in comments in the function headers but I wanted to avoid the
large changes for that.
