volumes. Treat the field as a semaphore protecting availability of
the device for mounting. Do no access devvp->v_rdev without the vnode
lock owned.
Protect change of the devvp->v_bufobj bo_ops vector with the vnode
lock.
Reviewed by: bde
Sponsored by: The FreeBSD Foundation
MFC after: 2 weeks
remounted to writeable after initial read-only. Assign to
dev->si_mountpt earlier to account the accesses done at the mount
time.
Based on submission by: bde
MFC after: 1 week
rounddown2 tends to produce longer lines than the original code
and when the code has a high indentation level it was not really
advantageous to do the replacement.
This tries to strike a balance between readability using the macros
and flexibility of having the expressions, so not everything is
converted.
for limiting disk (actually filesystem) IO.
Note that in some cases these limits are not quite precise. It's ok,
as long as it's within some reasonable bounds.
Testing - and review of the code, in particular the VFS and VM parts - is
very welcome.
MFC after: 1 month
Relnotes: yes
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D5080
into per-mount taskqueue with the private taskqueue processing thread.
This allows to drain the taskqueue on unmount, to ensure that all
TRIMs are finished before mount structures are freed.
But just draining the taskqueue where TRIM biodone geom-up completions
are processed is not enough, since ffs_blkfree(), called by the task,
might result in more writes. Count inflight delayed blkfree's and
pause() unmount until the counter drains as well.
Reported by: Nick Evans <nevans@talkpoint.com>
Tested by: Nick Evans <nevans@talkpoint.com>, pho
Sponsored by: The FreeBSD Foundation
MFC after: 2 weeks
expects that the loop is always exited with the SU lock owned, even on
error.
Reported and tested by: pho
Sponsored by: The FreeBSD Foundation
MFC after: 3 days
allocated. When shortening the length of a file in which the new end
of the file contains a hole, the hole must have a block allocated.
Reported by: Maxim Sobolev
Reviewed by: kib
Tested by: Peter Holm
crash a server that has exported UFS2 by presenting a filehandle
with an inode number that references an uninitialized inode in a
cylinder group. The problem is that UFS2 only initializes blocks
of inodes as they are first allocated and ffs_fhtovp() does not
validate that the inode is in a range of inodes that have been
initialized. Attempting to read an uninitialized inode gets random
data from the disk. When the kernel tries to interpret it as an
inode, panics often arise.
Reported by: Christos Zoulas (from NetBSD)
Reviewed by: kib
a buffer pointer in the event of an error (for some errors it would
return a buffer pointer and for other errors it would not return a
buffer pointer). The cluster_read() function was similarly inconsistent.
Clients of these functions were inconsistent in handling errors.
Some would assume that no buffer was returned after an error and
would thus lose buffers under certain error conditions. Others would
assume that brelse() should always be called after an error and
would thus panic the system under certain error conditions.
To correct both of these problems with minimal code churn, bread()
and cluster_write() now always free the buffer when returning an
error thus ensuring that buffers will never be lost. The brelse()
routine checks for being passed a NULL buffer pointer and silently
returns to avoid panics. Thus both approaches to handling error
returns from bread() and cluster_read() will work correctly.
Future code should be written assuming that bread() and cluster_read()
will never return a buffer with an error, so should not attempt to
brelse() the buffer when an error is returned.
Reviewed by: kib
ast was rescheduled during VFS_SYNC(). It is possible that enough
parallel writes or slow/hung volume result in VFS_SYNC() deferring to
the ast flushing of workqueue.
Reported and tested by: pho
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
the name of a filesystem when setting it as the first parameter to the
getnewvnode() function. Most filesystems call getnewvnode from just one
place so can use a literal string as the first parameter. However, NFS
calls getnewvnode from two places, so we create a global constant string
that can be used by the two instances. This change also collapses two
instances of getnewvnode() in the UFS filesystem to a single call.
Reviewed by: kib
Tested by: Peter Holm
deletions. Ability to do deletions is a strong indication that this
optimization will not help performance. It will only generate extra write
traffic. These devices are typically flash based and have a limited number of
write cycles. In addition, making the file contiguous in LBA space doesn't
improve the access times from flash devices because they have no seek time.
Reviewed by: mckusick@
of the D_NEWBLK kinds of dependencies (i.e. D_ALLOCDIRECT and
D_ALLOCINDIR), which can exhaust kmem.
Handle excess of D_NEWBLK in the same way as excess of D_INODEDEP and
D_DIRREM, by scheduling ast to flush dependencies, after the thread,
which created new dep, left the VFS/FFS innards. For D_NEWBLK, the
only way to get rid of them is to do full sync, since items are
attached to data blocks of arbitrary vnodes. The check for D_NEWBLK
excess in softdep_ast_cleanup_proc() is unlocked.
For 32bit arches, reduce the total amount of allowed dependencies by
two. It could be considered increasing the limit for 64 bit platforms
with direct maps.
Reported and tested by: pho
Sponsored by: The FreeBSD Foundation
MFC after: 2 weeks
'buf' is inconvenient and has lead me to some irritating to discover
bugs over the years. It also makes it more challenging to refactor
the buf allocation system.
- Move swbuf and declare it as an extern in vfs_bio.c. This is still
not perfect but better than it was before.
- Eliminate the unused ffs function that relied on knowledge of the buf
array.
- Move the shutdown code that iterates over the buf array into vfs_bio.c.
Reviewed by: kib
Sponsored by: EMC / Isilon Storage Division
- Use pointer assignment rather than a combination of pointers and
flags to switch buffers between unmapped and mapped. This eliminates
multiple flags and generally simplifies the logic.
- Eliminate b_saveaddr since it is only used with pager bufs which have
their b_data re-initialized on each allocation.
- Gather up some convenience routines in the buffer cache for
manipulating buf space and buf malloc space.
- Add an inline, buf_mapped(), to standardize checks around unmapped
buffers.
In collaboration with: mlaier
Reviewed by: kib
Tested by: pho (many small revisions ago)
Sponsored by: EMC / Isilon Storage Division
This obviates the need for a MNTK_SUSPENDABLE flag, since passthrough
filesystems like nullfs and unionfs no longer need to inherit this
information from their lower layer(s). This change also restores the
pre-r273336 behaviour of using the presence of a susp_clean VFS method to
request suspension support.
Reviewed by: kib, mjg
Differential Revision: https://reviews.freebsd.org/D2937
* GENERAL
- Update copyright.
- Make kernel options for RANDOM_YARROW and RANDOM_DUMMY. Set
neither to ON, which means we want Fortuna
- If there is no 'device random' in the kernel, there will be NO
random(4) device in the kernel, and the KERN_ARND sysctl will
return nothing. With RANDOM_DUMMY there will be a random(4) that
always blocks.
- Repair kern.arandom (KERN_ARND sysctl). The old version went
through arc4random(9) and was a bit weird.
- Adjust arc4random stirring a bit - the existing code looks a little
suspect.
- Fix the nasty pre- and post-read overloading by providing explictit
functions to do these tasks.
- Redo read_random(9) so as to duplicate random(4)'s read internals.
This makes it a first-class citizen rather than a hack.
- Move stuff out of locked regions when it does not need to be
there.
- Trim RANDOM_DEBUG printfs. Some are excess to requirement, some
behind boot verbose.
- Use SYSINIT to sequence the startup.
- Fix init/deinit sysctl stuff.
- Make relevant sysctls also tunables.
- Add different harvesting "styles" to allow for different requirements
(direct, queue, fast).
- Add harvesting of FFS atime events. This needs to be checked for
weighing down the FS code.
- Add harvesting of slab allocator events. This needs to be checked for
weighing down the allocator code.
- Fix the random(9) manpage.
- Loadable modules are not present for now. These will be re-engineered
when the dust settles.
- Use macros for locks.
- Fix comments.
* src/share/man/...
- Update the man pages.
* src/etc/...
- The startup/shutdown work is done in D2924.
* src/UPDATING
- Add UPDATING announcement.
* src/sys/dev/random/build.sh
- Add copyright.
- Add libz for unit tests.
* src/sys/dev/random/dummy.c
- Remove; no longer needed. Functionality incorporated into randomdev.*.
* live_entropy_sources.c live_entropy_sources.h
- Remove; content moved.
- move content to randomdev.[ch] and optimise.
* src/sys/dev/random/random_adaptors.c src/sys/dev/random/random_adaptors.h
- Remove; plugability is no longer used. Compile-time algorithm
selection is the way to go.
* src/sys/dev/random/random_harvestq.c src/sys/dev/random/random_harvestq.h
- Add early (re)boot-time randomness caching.
* src/sys/dev/random/randomdev_soft.c src/sys/dev/random/randomdev_soft.h
- Remove; no longer needed.
* src/sys/dev/random/uint128.h
- Provide a fake uint128_t; if a real one ever arrived, we can use
that instead. All that is needed here is N=0, N++, N==0, and some
localised trickery is used to manufacture a 128-bit 0ULLL.
* src/sys/dev/random/unit_test.c src/sys/dev/random/unit_test.h
- Improve unit tests; previously the testing human needed clairvoyance;
now the test will do a basic check of compressibility. Clairvoyant
talent is still a good idea.
- This is still a long way off a proper unit test.
* src/sys/dev/random/fortuna.c src/sys/dev/random/fortuna.h
- Improve messy union to just uint128_t.
- Remove unneeded 'static struct fortuna_start_cache'.
- Tighten up up arithmetic.
- Provide a method to allow eternal junk to be introduced; harden
it against blatant by compress/hashing.
- Assert that locks are held correctly.
- Fix the nasty pre- and post-read overloading by providing explictit
functions to do these tasks.
- Turn into self-sufficient module (no longer requires randomdev_soft.[ch])
* src/sys/dev/random/yarrow.c src/sys/dev/random/yarrow.h
- Improve messy union to just uint128_t.
- Remove unneeded 'staic struct start_cache'.
- Tighten up up arithmetic.
- Provide a method to allow eternal junk to be introduced; harden
it against blatant by compress/hashing.
- Assert that locks are held correctly.
- Fix the nasty pre- and post-read overloading by providing explictit
functions to do these tasks.
- Turn into self-sufficient module (no longer requires randomdev_soft.[ch])
- Fix some magic numbers elsewhere used as FAST and SLOW.
Differential Revision: https://reviews.freebsd.org/D2025
Reviewed by: vsevolod,delphij,rwatson,trasz,jmg
Approved by: so (delphij)
First, on the write error, bufdone() call from ffs_backgroundwrite()
panics because pbrelvp() cleared bp->b_bufobj, while brelse() would
try to re-dirty the copy of the cg buffer. Handle this by setting
B_INVAL for the case of BIO_ERROR.
Second, we must re-dirty the real buffer containing the cylinder group
block data when background write failed. Real cg buffer was already
marked clean in ffs_bufwrite(). After the BV_BKGRDINPROG flag is
cleared on the real cg buffer in ffs_backgroundwrite(), buffer scan
may reuse the buffer at any moment. The result is lost write, and if
the write error was only transient, we get corrupted bitmaps.
We cannot re-dirty the original cg buffer in the
ffs_backgroundwritedone(), since the context is not sleepable,
preventing us from sleeping for origbp' lock. Add BV_BKGDERR flag
(protected by the buffer object lock), which is converted into delayed
write by brelse(), bqrelse() and buffer scan.
In collaboration with: Conrad Meyer <cse.cem@gmail.com>
Reviewed by: mckusick
Sponsored by: The FreeBSD Foundation (kib),
EMC/Isilon storage division (Conrad)
MFC after: 2 weeks
the active vnode list for the given mount point, with the assumption
that vnodes with dirty pages are active. This is enforced by
vinactive() doing vm_object_page_clean() pass over the vnode pages.
The issue is, if vinactive() cannot be called during vput() due to the
vnode being only shared-locked, we might end up with the dirty pages
for the vnode on the free list. Such vnode is invisible to syncer,
and pages are only cleaned on the vnode reactivation. In other words,
the race results in the broken guarantee that user data, written
through the mmap(2), is written to the disk not later than in 30
seconds after the write.
Fix this by keeping the vnode which is freed but still owing
inactivation, on the active list. When syncer loops find such vnode,
it is deactivated and cleaned by the final vput() call.
Tested by: pho
Sponsored by: The FreeBSD Foundation
MFC after: 2 weeks
softdep_sync() similarly to the regular vnode sync. Allow retry for
both vnode types.
Reported and tested by: pho
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
When deallocate_dependencies() is performed,
softdep_journal_freeblocks() already called cancel_allocdirect() which
should have eliminated direct dependencies for all truncated full
blocks. The indirect dependencies are allowed above, since second-
and third-level dependencies are only dealt with by the code which
frees indirect block, which happens after the inode write.
Discussed with: mckusick, jeff
Reviewed by: jeff
Sponsored by: The FreeBSD Foundation
MFC after: 2 weeks
buildkernel run.
Some of them were write-only under some kernel options, e.g. variables
keeping values only used by CTR() macros. It costs nothing to the
code readability and correctness to eliminate the warnings in those
cases too by removing the local cached values used only for
single-access.
Review: https://reviews.freebsd.org/D2665
Reviewed by: rodrigc
Looked at by: bjk
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
Eliminate it, and simplify code by removing the local dflags variable
always initialized to DEPALLOC.
Noted by: mckusick
Sponsored by: The FreeBSD Foundation
MFC after: 2 weeks
limits in the code which is deep in the call stack, and owns several
critical system resources, like vnode locks. Attempt to wait while
the per-mount softupdate thread cleans up the backlog may deadlock,
because the thread might need to lock the same vnode which is owned by
the waiting thread.
Instead of synchronously waiting for the worker, perform the worker'
tickle and pause until the backlog is cleaned, at the safe point
during return from kernel to usermode. A new ast request to call
softdep_ast_cleanup() is created, the SU code now only checks the size
of queue and schedules ast.
There is no ast delivery for the kernel threads, so they are exempted
from the mechanism, except NFS daemon threads. NFS server loop
explicitely checks for the request, and informs the schedule_cleanup()
that it is capable of handling the requests by the process P2_AST_SU
flag. This is needed because nfsd may be the sole cause of the SU
workqueue overflow. But, to not cause nsfd to spawn additional
threads just because we slow down existing workers, only tickle su
threads, without waiting for the backlog cleanup.
Reviewed by: jhb, mckusick
Tested by: pho
Sponsored by: The FreeBSD Foundation
MFC after: 2 weeks
trying to build a cluster. The limit is tunable using the sysctl
vfs.ffs.maxclustersearch. The current limit is 10 cylinder groups
per block allocation. It was previously limited to the number of
cylinder groups in the filesystem per block allocation. When there
were no clusters of the needed size left, it repeatedly searched
the whole filesystem for a non-existent cluster on every block
allocation. The result was very slow filesystem allocation with
100% CPU utilization. The old behavior can be had by setting
vfs.ffs.maxclustersearch to a huge number (1,000,000).
This change affects only the layout policy routines so is not able
to interfere with the integrity of the filesystem.
Reported by: Dmitry Sivachenko (demon@)
Tested by: Dmitry Sivachenko (demon@)
MFC after: 2 weeks
use VOP_FSYNC() to perform the NFS server's Commit operation.
This patch adds a mnt_kern_flag called MNTK_USES_BCACHE which
is set by file systems that use the buffer cache. If this flag
is not set, the NFS server always does a VOP_FSYNC().
This should be ok for old file system modules that do not set
MNTK_USES_BCACHE, since calling VOP_FSYNC() is correct, although
it might not be optimal for file systems that use the buffer cache.
Reviewed by: kib
MFC after: 2 weeks
sequence is performed on UFS SU+J rootfs:
cp -Rp /sbin/init /sbin/init.old
mv -f /sbin/init.old /sbin/init
Hang occurs on the rootfs unmount. There are two issues:
1. Removed init binary, which is still mapped, creates a reference to
the removed vnode. The inodeblock for such vnode must have active
inodedep, which is (eventually) linked through the unlinked list. This
means that ffs_sync(MNT_SUSPEND) cannot succeed, because number of
softdep workitems for the mp is always > 0. FFS is suspended during
unmount, so unmount just hangs.
2. As noted above, the inodedep is linked eventually. It is not
linked until the superblock is written. But at the vfs_unmountall()
time, when the rootfs is unmounted, the call is made to
ffs_unmount()->ffs_sync() before vflush(), and ffs_sync() only calls
ffs_sbupdate() after all workitems are flushed. It is masked for
normal system operations, because syncer works in parallel and
eventually flushes superblock. Syncer is stopped when rootfs
unmounted, so ffs_sync() must do sb update on its own.
Correct the issues listed above. For MNT_SUSPEND, count the number of
linked unlinked inodedeps (this is not a typo) and substract the count
of such workitems from the total. For the second issue, the
ffs_sbupdate() is called right after device sync in ffs_sync() loop.
There is third problem, occuring with both SU and SU+J. The
softdep_waitidle() loop, which waits for softdep_flush() thread to
clear the worklist, only waits 20ms max. It seems that the 1 tick,
specified for msleep(9), was a typo.
Add fsync(devvp, MNT_WAIT) call to softdep_waitidle(), which seems to
significantly help the softdep thread, and change the MNT_LAZY update
at the reboot time to MNT_WAIT for similar reasons. Note that
userspace cannot create more work while devvp is flushed, since the
mount point is always suspended before the call to softdep_waitidle()
in unmount or remount path.
PR: 195458
In collaboration with: gjb, pho
Reviewed by: mckusick
Sponsored by: The FreeBSD Foundation
MFC after: 2 weeks
instead of waiting for the FLUSH_* flags. Also, when requesting
flush, do the wakeups unconditionally even when FLUSH_CLEANUP flag was
already set.
Reported and tested by: dim,
"Lundberg, Johannes" <johannes@brilliantservice.co.jp>
Bisected by: dim
MFC after: 2 weeks
thread started and incremented the stat_flush_threads [1].
Unconditionally wakeup softdep_flush threads when needed, do not try
to check wchan, which is racy and breaks abstraction.
Reported by and discussed with: glebius, neel
Tested by: pho
Sponsored by: The FreeBSD Foundation
MFC after: 2 weeks
into namecache, to avoid cache trashing when doing large operations.
E.g., tar archive extraction is not usually followed by access to many
of the files created.
Right now, each VOP_LOOKUP() implementation explicitely knowns about
this quirk and tests for both MAKEENTRY flag presence and op != CREATE
to make the call to cache_enter(). Centralize the handling of the
quirk into VFS, by deciding to cache only by MAKEENTRY flag in VOP.
VFS now sets NOCACHE flag for CREATE namei() calls.
Note that the change in semantic is backward-compatible and could be
merged to the stable branch, and is compatible with non-changed
third-party filesystems which correctly handle MAKEENTRY.
Suggested by: Chris Torek <torek@pi-coral.com>
Reviewed by: mckusick
Tested by: pho
Sponsored by: The FreeBSD Foundation
MFC after: 2 weeks
o Provide a new VOP_GETPAGES_ASYNC(), which works like VOP_GETPAGES(), but
doesn't sleep. It returns immediately, and will execute the I/O done handler
function that must be supplied as argument.
o Provide VOP_GETPAGES_ASYNC() for the FFS, which uses vnode_pager.
o Extend pagertab to support pgo_getpages_async method, and implement this
method for vnode_pager.
Reviewed by: kib
Tested by: pho
Sponsored by: Netflix
Sponsored by: Nginx, Inc.
are not suspended. In particular, on the SU-enabled vulumes, there is
no reason why, between the call to softdep_flushfiles() and
softdep_waitidle(), SU work items cannot be queued.
Correct the condition to trigger the panic by only checking when
forced operation is done. Convert direct panic() call into KASSERT(),
there is no invalid on-disk data structures directly involved, so
follow the usual debugging vs. non-debugging approach.
Reported and tested by: pho
Reviewed by: mckusick
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
two.
nullfs and unionfs need to request suspension if underlying filesystem(s)
use it. Utilize mnt_kern_flag for this purpose.
This is a fixup for 273271.
No strong objections from: kib
Pointy hat to: mjg
MFC after: 2 weeks
