input routines and take advantage of the new init/continue
interface in libradius. This allows a timely response on
other links in an MP setup while RADIUS requests are in
progress as well as the ability to handle other data from
the peer in parallel. It should also make the future addition
of PAM support trivial.
While I'm in there, validate pap & chap header IDs if
``idcheck'' is enabled (the default) for other FSM packet
types.
NOTE: This involved integrating the generation of chap
challenges and the validation of chap responses
(and commenting what's going on in those routines).
I currently have no way of testing ppps ability
to respond to M$Chap CHALLENGEs correctly, so if
someone could do the honours, it'd be much
appreciated (it *looks* ok!).
Sponsored by: Internet Business Solutions Ltd., Switzerland
Now we know which variables are internal and which need to be
backed to /etc/rc.conf.site. rc.conf is not touched now.
Also kget kernel change information back properly and set up a loader.rc
file to use it.
Previously the foolowing lines would have broken:
controller fdc0 at isa? disable port ? bio
controller fdc0 at isa? disable port 0x100 bio
While this would work:
controller fdc0 at isa? disable port "IO_FD1" bio
The first of the three lines is useful for making placeholder devices
for PCMCIA-floppies, and the second is useful for non-standard hardware.
The failure is a "(null)" string in ioconf.c that the compiler pukes on.
Thanks to: Bruce Evans (bde@freebsd.org)
configured. This isn't strictly necessary according to the
rfc, but it's suggested there....
o Don't forget to include our authname when sending a
CHAP challenge when RADIUS is configured.
o Don't supply the ``16'' representing the chap answer
length to radius_Authenticate() - libradius does this
for us.
o When we successfully authenticate via radius_Authenticate(),
continue with datalink_AuthOk() as expected.
Sponsored by: Internet Business Solutions Ltd., Switzerland
details. Compiling with -DNORADIUS (the default for `release')
removes support.
TODO: The functionality in libradius::rad_send_request() needs
to be supplied as a set of routines so that ppp doesn't
have to wait indefinitely for the radius server(s). Instead,
we need to get a descriptor back, select() on the descriptor,
and ask libradius to service it when necessary.
For now, ppp blocks SIGALRM while in rad_send_request(), so
it misses PAP/CHAP retries & timeouts if they occur.
Only PAP is functional. When CHAP is attempted, libradius
complains that no User-Password has been specified... rfc2138
says that it *mustn't* be used for CHAP :-(
Sponsored by: Internet Business Solutions Ltd., Switzerland
wcarchive. This needs to be updated when:
(a) The directory structure changes on wcarchive
(b) getosreldate() has a new significance
(ie. get ELF packages/get a.out packages)
(c) Branches are changed around
As we stand right now, 3.0-postELFday and 4.0-x all point to the same
directory, but when 4.0 starts to have its own packages, this file will
need to be changed.
Add the much-needed and long-desired ability to force the log rotation
to take place on a specific day or time, and document same. This works
by extending the syntax of the `when' field to allow a restricted
ISO 8601 time specification, and performing the log rotation if newsyslog
is run during the same hour as is specified.
changes:
- Finish migrating zic to its own private.h.
- Fix zic.8 so that it really is written in -mdoc.
- Add four new flags to zic (&document):
-D don't create directories
-u change ownership of newly-created files to user
-g change ownership of newly-created files to group
-m change mode of newly-created files to modespec
These, once proven, can be used to clean up the installation.
Obtained from: ftp://elsie.nci.nih.gov/pub/tzcode1999a.tar.gz (partially)
with minor changes to work around a bug in Cisco's IOS version 12.0 .
3.9-beta3 is much improved over 3.8, and is only labelled "beta" because
of missing features, as opposed to instability or known bugs.
otherwise windows clients will keep resending the
response :-/
It'd be nice if M$ would document this sort of thing !
Problem reported by: Andrzej Tobola <san@tmp.iem.pw.edu.pl>
The previous commit broke mtree(8) when file names using certain 8-bit
characters ended up being encoded with '/', '*', and other shell
metacharacters.
PR: bin/9538
Submitted by: "Eugene M. Kim" <astralblue@usa.net>
Reviewed by: jkoshy
Bug-missed-last-time-by: jkoshy
The remote option allows for automatic package fetching and installation
using the package repository found on wcarchive. Naturally, this site
can be overridden with a enviornment variable.
This code uses getobjformat() and getosreldate(). This means when some event
causes the package to be fetched to change (such as e-day) the logic also
needs to be changed.
Sorta reviewed by: jkh
Code suggestions: peter, jkh, eivind, msmith
Make two digit years specified on the command line represent
the century that the computer currently resides. So 99 means
1999 this year, but 2099 next year.
Pointed out by: Peter Jeremy <peter.jeremy@auss2.alcatel.com.au>
CALLBACK protocol and end up agreeing CBCP, DTRT and go
into CBCP phase rather than mistakenly terminating as
if CBCP wasn't agreed.
Problem reported by: Alexander Dubinin <alex@nstl.nnov.ru>
+ ECP parallel port chipset FIFO detection
+ DMA+FIFO parallel I/O handled as chipset specific
+ nlpt updated in order to use the above enhanced parallel I/O.
Use 'lptcontrol -e' to use enhanced I/O
+ Various options documented in LINT
+ Full IEEE1284 NIBBLE and BYTE modes support. See ppbus(4) for
an overview of the IEEE1284 standard
+ Detection of PnP parallel devices at boot
+ Read capability added to nlpt driver to get IEEE1284 compliant
printer status with a simple 'cat /dev/lpt0'
+ IEEE1284 peripheral emulation added to BYTE mode. Two computers
may dialog according to IEEE1284 signaling method.
See PERIPH_1284 option and /sys/dev/ppbus/ppi.c
All this code is supposed to provide basic functions for IEEE1284 programming.
ppi.c and nlpt.c may act as examples.
the answer.
If we later get a descriptor exception from select(), we know
that it's a tty (isatty() returns 0 after the exception on a
tty) and remember to call modem_LogicalClose().
The upshot of it all is that descriptor exceptions dont leave
the tty locked any more.
on the ASIX AX88140A chip. Update /sys/conf/files, RELNOTES.TXT,
/sys/i388/i386/userconfig.c, sysinstall/devices.c, GENERIC and LINT
accordingly.
For now, the only board that I know of that uses this chip is the
Alfa Inc. GFC2204. (Its predecessor, the GFC2202, was a DEC tulip card.)
Thanks again to Ulf for obtaining the board for me. If anyone runs
across another, please feel free to update the man page and/or the
release notes. (The same applies for the other drivers.)
FreeBSD should now have support for all of the DEC tulip workalike
chipsets currently on the market (Macronix, Lite-On, Winbond, ASIX).
And unless I'm mistaken, it should also have support for all PCI fast
ethernet chipsets in general (except maybe the SMC FEAST chip, which
nobody seems to ever use, including SMC). Now if only we could convince
3Com, Intel or whoever to cough up some documentation for gigabit
ethernet hardware.
Also updated RELNOTEX.TXT to mention that the SVEC PN102TX is supported
by the Macronix driver (assuming you actually have an SVEC PN102TX with
a Macronix chip on it; I tried to order a PN102TX once and got a box
labeled 'Hawking Technology PN102TX' that had a VIA Rhine board inside
it).
arguments to be numbers. Also use '0' base to allow hex, octal or
decimal numbers.
This was done by me based on ideas in pr 3556, submitted by Uwe
Laubenstein and commented upon by j@uriah.heep.sax.de (J Wunsch).
PR: 3556
The char that the random letters and numbers are being pulled from is
ended with a '\0'. Using sizeof() includes this '\0' in the 'pool' of
possible characters. This patch decrements by one the size so we don't
accidently end the new password prematurly.
and terminate it. This patch ensures passwords will be the correct length of 8,
which is what is implied in the source (but not reflected in the man page).
PR: bin/7817
Reviewed by: Alfred Perlstein <bright@hotjobs.com>
Submitted by: Hiroshi Nishikawa <nis@pluto.dti.ne.jp>
in getopt(). The code was there, the means to use it wasn't.
Also update the usage() statment to reflect reality.
PR: bin/9248
Submitted by: Jos Backus <jbackus@plex.nl>
Forgotten By: dillon
to a hostname. This will help those who keep a cluster of machines all with
the same hostname but different domain names.
PR: bin/9091
Submitted By: Heikki Suonsivu <hsu@clinet.fi>
No Response From: -current mailing list
arithmetic instead of the special macros in PR 8163 or the magic
2's in PR 381. (Rev.1.3 unfortunately fixed only half of the
problems reported in PR 381.)
PR: 381, 8163
Fixed missing DPADD.
Fixed placement of the include of bsd.prog.mk. It annulled
`make checkdpadd', which should have been run to find the broken DPADD.
It just replace u_long with u_int32_t and shouldn't affect on i386.
Without this patch,
- unaligned accesses occur
- permission denied randomly
Submitted by: Hidetoshi Shimokawa <simokawa@sat.t.u-tokyo.ac.jp>
ISDN4BSD is the work of our brand-new comitter: Hellmuth Michaelis,
who has done a tremendous amount of work to bring us this far.
There are still some outstanding issues and files to bring into
the tree, and for now it will be needed to pick up all the extra
docs from the isdn4bsd release.
It is probably also a very good idea to subscribe to the isdn@freebsd.org
mailing list before you try this out.
These files correspond to release "beta Version 0.70.00 / December
1998" from Hellmuth.
