dev_refthread() will return the cdevsw pointer or NULL. If the
return value is non-NULL a threadcount is held which much be released
with dev_relthread(). If the returned cdevsw is NULL no threadcount
is held on the device.
of the number of threads which are inside whatever is behind the
cdevsw for this particular cdev.
Make the device mutex visible through dev_lock() and dev_unlock().
We may want finer granularity later.
Replace spechash_mtx use with dev_lock()/dev_unlock().
and the previously malloc'ed snapshot lock.
Malloc struct snapdata instead of just the lock.
Replace snapshot fields in cdev with pointer to snapdata (saves 16 bytes).
While here, give the private readblock() function a vnode argument
in preparation for moving UFS to access GEOM directly.
a more complete subsystem, and removes the knowlege of how things are
implemented from the drivers. Include locking around filter ops, so a
module like aio will know when not to be unloaded if there are outstanding
knotes using it's filter ops.
Currently, it uses the MTX_DUPOK even though it is not always safe to
aquire duplicate locks. Witness currently doesn't support the ability
to discover if a dup lock is ok (in some cases).
Reviewed by: green, rwatson (both earlier versions)
The big lines are:
NODEV -> NULL
NOUDEV -> NODEV
udev_t -> dev_t
udev2dev() -> findcdev()
Various minor adjustments including handling of userland access to kernel
space struct cdev etc.
This is what we came here for: Hang dev_t's from their cdevsw,
refcount cdevsw and dev_t and generally keep track of things a lot
better than we used to:
Hold a cdevsw reference around all entrances into the device driver,
this will be necessary to safely determine when we can unload driver
code.
Hold a dev_t reference while the device is open.
KASSERT that we do not enter the driver on a non-referenced dev_t.
Remove old D_NAG code, anonymous dev_t's are not a problem now.
When destroy_dev() is called on a referenced dev_t, move it to
dead_cdevsw's list. When the refcount drops, free it.
Check that cdevsw->d_version is correct. If not, set all methods
to the dead_*() methods to prevent entrance into driver. Print
warning on console to this effect. The device driver may still
explode if it is also incompatible with newbus, but in that case
we probably didn't get this far in the first place.
Remove the unused second argument from udev2dev().
Convert all remaining users of makedev() to use udev2dev(). The
semantic difference is that udev2dev() will only locate a pre-existing
dev_t, it will not line makedev() create a new one.
Apart from the tiny well controlled windown in D_PSEUDO drivers,
there should no longer be any "anonymous" dev_t's in the system
now, only dev_t's created with make_dev() and make_dev_alias()
Introduce d_version field in struct cdevsw, this must always be
initialized to D_VERSION.
Flip sense of D_NOGIANT flag to D_NEEDGIANT, this involves removing
four D_NOGIANT flags and adding 145 D_NEEDGIANT flags.
Add missing D_TTY flags to various drivers.
Complete asserts that dev_t's passed to ttyread(), ttywrite(),
ttypoll() and ttykqwrite() have (d_flags & D_TTY) and a struct tty
pointer.
Make ttyread(), ttywrite(), ttypoll() and ttykqwrite() the default
cdevsw methods for D_TTY drivers and remove the explicit initializations
in various drivers cdevsw structures.
This commit adds a couple of functions for pseudodrivers to use for
implementing cloning in a manner we will be able to lock down (shortly).
Basically what happens is that pseudo drivers get a way to ask for
"give me the dev_t with this unit number" or alternatively "give
me a dev_t with the lowest guaranteed free unit number" (there is
unfortunately a lot of non-POLA in the exact numeric value of this
number, just live with it for now)
Managing the unit number space this way removes the need to use
rman(9) to do so in the drivers this greatly simplifies the code in
the drivers because even using rman(9) they still needed to manage
their dev_t's anyway.
I have taken the if_tun, if_tap, snp and nmdm drivers through the
mill, partly because they (ab)used makedev(), but mostly because
together they represent three different problems for device-cloning:
if_tun and snp is the plain case: just give me a device.
if_tap has two kinds of devices, with a flag for device type.
nmdm has paired devices (ala pty) can you can clone either of them.
missing parentheses). Use default handling (trap to debugger) for
udev2dev(x, 1) since it is an error and doesn't happen anywhere in
the sys tree except in bogusly commented out code in coda.
called until DEVFS had a chance to initialize. Since DEVFS is mandatory
and things over in that department coincidentally works from without
any initialization now, this is safe.
do exactly the same as vop_nopoll() for consistency and put a
comment in the two pointing at each other.
Retire seltrue() in favour of no_poll().
Create private default functions in kern_conf.c instead of public
ones.
Change default strategy to return the bio with ENODEV instead of
doing nothing which would lead the bio stranded.
Retire public nullopen() and nullclose() as well as the entire band
of public no{read,write,ioctl,mmap,kqfilter,strategy,poll,dump}
funtions, they are the default actions now.
Move the final two trivial functions from subr_xxx.c to kern_conf.c
and retire the now empty subr_xxx.c
provide no methods does not make any sense, and is not used by any
driver.
It is a pretty hard to come up with even a theoretical concept of
a device driver which would always fail open and close with ENODEV.
Change the defaults to be nullopen() and nullclose() which simply
does nothing.
Remove explicit initializations to these from the drivers which
already used them.
branches:
Initialize struct cdevsw using C99 sparse initializtion and remove
all initializations to default values.
This patch is automatically generated and has been tested by compiling
LINT with all the fields in struct cdevsw in reverse order on alpha,
sparc64 and i386.
Approved by: re(scottl)
To do this, initialize the d_maj member of the cdevsw to MAJOR_AUTO.
When the cdevsw is first passed to make_dev() a free major number
will be assigned.
Until we have a bit more experience with this a printf will announce
this fact.
Major numbers are not reclaimed, so loading/unloading the same
device driver which uses MAJOR_AUTO will eventually deplete the
pool of free major numbers and the system will panic when it can
not allocate one. Still undecided who to invonvenience with the
solution to this.
Retire the "d_dump_t" and use the "dumper_t" type instead.
Dumper_t takes a void * as first arg which is more general than the
dev_t taken by d_dump_t. (Remember: we could have net-dumpers if
somebody wrote us one!)
Define the convention for GEOM controlled disk devices to be that the
first argument to the dumper function is the struct disk pointer.
Change device drivers accordingly.
In devsw() return dead_cdevsw instead of NULL in case the dev_t does not
have a si_devsw.
This may improve our survival chances with devices which go away unexpectedly.
Change the si_name of dev_t's to be a char * and put a private buffer for
holding the name at then end of the struct.
Initialize si_name to point to the private buffer.
Put a KASSERT in geom_disk to prevent overrun on the fake dev_t we still
have to generate for the disk_drivers.
This implicitly removes the need for major numbers, but a number of
drivers still know things they shouldn't need to, and we need to
consider if there are applications which cache major(+minor) gleaned
from stat(2) and rely on it being constant over reboots before we
start assigning random majors.
