Trim leading spaces in variable names when the list is e.g.
pretty-formatted in /etc/login.conf or ~/.login_conf.
PR: 247947
Reviewed by: allanjude
Differential Revision: https://reviews.freebsd.org/D25649
Right now, libthr does not initialize RtldLockInfo.rtli_version when calling
_rtld_thread_init(), which makes versioning the interface troublesome.
Add a workaround: if the calling object of _rtld_thread_init() exports
the "_pli_rtli_version" symbol, then consider rtli_version initialized.
Otherwise, forcibly set it to RTLI_VERSION_ONE, currently defined as
RTLI_VERSION.
Export "_pli_rtli_version" from libthr and properly initialize rtli_version.
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
Differential revision: https://reviews.freebsd.org/D29633
After 3b00222f15, it turns out that clang only supports strict
floating point semantics for SystemZ and x86 at the moment, while for
other architectures it is still experimental.
Therefore, only use -fp-exception-behavior=maytrap on x86 for now,
otherwise this option results in "error: overriding currently
unsupported use of floating point exceptions on this target
[-Werror,-Wunsupported-floating-point-opt]" on other architectures.
Fixes: 3b00222f15
PR: 254911
MFC after: 1 week
When using clang with x86_64 CPUs that support AVX, some floating point
transformations may raise exceptions that would not have been raised by
the original code. To avoid this, use the -fp-exception-behavior=maytrap
flag, introduced in clang 10.0.0.
In particular, this fixes a number of test failures with ctanhf(3) and
ctanf(3), when libm is compiled with -mavx. An unexpected FE_INVALID
exception is then raised, because clang emits vdivps instructions to
perform certain divides. (The vdivps instruction operates on multiple
single-precision float operands simultaneously, but the exceptions may
be influenced by unused parts of the XMM registers. In this particular
case, it was calculating 0 / 0, which results in FE_INVALID.)
If -fp-exception-behavior=maytrap is specified however, clang uses
vdivss instructions instead, which work on one operand, and should not
raise unexpected exceptions.
Reported by: olivier
Reviewed by: arichardson
PR: 254911
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D29686
struct pf_rule had a few counter_u64_t counters. Those couldn't be
usefully comminicated with userspace, so the fields were doubled up in
uint64_t u_* versions.
Now that we use struct pfctl_rule (i.e. a fully userspace version) we
can safely change the structure and remove this wart.
Reviewed by: glebius
MFC after: 4 weeks
Sponsored by: Rubicon Communications, LLC ("Netgate")
Differential Revision: https://reviews.freebsd.org/D29645
Stop using the kernel's struct pf_rule, switch to libpfctl's pfctl_rule.
Now that we use nvlists to communicate with the kernel these structures
can be fully decoupled.
Reviewed by: glebius
MFC after: 4 weeks
Sponsored by: Rubicon Communications, LLC ("Netgate")
Differential Revision: https://reviews.freebsd.org/D29644
Build libnv as position independent code so we can use it from shared
libraries.
MFC after: 4 weeks
Sponsored by: Rubicon Communications, LLC ("Netgate")
Differential Revision: https://reviews.freebsd.org/D29561
This is the same change as d36d681615, but for libc static implementaion
of dl_iterate_phdr().
Reported by: emacsray@gmail.com
PR: 254774
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
Differential revision: https://reviews.freebsd.org/D29623
When compiling parts of math.h with clang using a C standard before C11,
and using -pedantic, it will result in warnings similar to:
bug254714.c:5:11: warning: '_Generic' is a C11 extension [-Wc11-extensions]
return !isfinite(1.0);
^
/usr/include/math.h:111:21: note: expanded from macro 'isfinite'
^
/usr/include/math.h:82:39: note: expanded from macro '__fp_type_select'
^
This is because the block that enables use of _Generic is conditional
not only on C11, but also on whether the compiler advertises support for
C generic selections via __has_extension(c_generic_selections).
To work around the warning without having to pessimize the code, use the
__extension__ keyword, which is supported by both clang and gcc. While
here, remove the check for __clang__, as _Generic has been supported for
a long time by gcc too now.
Reported by: yuri
PR: 254714
MFC after: 1 week
This was only needed on 32-bit arm prior to ARMv6. As we only support
ARMv6 or later remove it.
Reviewed by: mannu
Sponsored by: Innovate UK
Differential Revision: https://reviews.freebsd.org/D29624
In situations when the current file name wasn't the first element on
the list we were cleaning the current name too early.
This might cause us to pre-cache the same file twice.
dl_iterate_phdr() dlpi_tls_data should provide the TLS module segment
address, and not the TLS init segment address as it does now.
Reported by: emacsray@gmail.com
PR: 254774
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
Add a new option to pam_unix(8), "emptyok", which makes it not prompt
for password, if it's set to an empty one. It is similar to "nullok",
which makes it not prompt for password if the hash itself is empty.
Reviewed By: markj
Sponsored By: NetApp, Inc.
Sponsored By: Klara, Inc.
Differential Revision: https://reviews.freebsd.org/D27569
The reset is necessary at the beginning of the function, because of
the errno logic in the error path (set errno to EINVAL if not set).
If errno is already set when calling the function, and the function
fails, the previous errno value will be inherited.
Instead of polling nleft[i] (without appropriate memory barriers!) and
using sleep() to detect the exit just call pthread_join() on all threads.
Also replace the use of a mutex that guarding the increments with atomic
fetch_add. This should reduce the runtime of this test on SMP systems.
Finally, remove all the debug printfs unless DEBUG_OUTPUT is set in
the environment.
Test Plan: still fails sometimes on qemu (but maybe less often?)
Reviewed By: jhb
Differential Revision: https://reviews.freebsd.org/D29390
The companion libnetmap changes for the "offsets" kernel support added
in a6d768d845. This includes code to parse the "@offset=NNN"
option that can be appended to the port name by any nmport_* application.
Example:
# pkt-gen -i 'netmap:em0@offset=16'
Without this patch, sh can autocomplete file names but not commands from
$PATH. Use libedit's facility to execute custom function for autocomplete,
but yield to the library's standard autocomplete function when cursor is
not at position 0.
Reviewed by: bapt
Differential Revision: https://reviews.freebsd.org/D29361
POWER architecture CPUs (Book-S) require natural alignment for
cache-inhibited storage accesses. Since we can't know the caching model
for a page ahead of time, always enforce natural alignment in bcopy.
This fixes a SIGBUS when calling the function with misaligned pointers
on POWER7.
Submitted by: Bruno Larsen <bruno.larsen@eldorado.org.br>
Reviewed by: luporl, bdragon (IRC)
MFC after: 1 week
Sponsored by: Eldorado Research Institute (eldorado.org.br)
Differential Revision: https://reviews.freebsd.org/D28776
The error cases (goto fin) of _nsdispatch were missing the unlock.
This change also drops the checks for __isthreaded since the pthread stubs
are already no-ops if threads are not being used. Dropping those conditionals
allows clang's thread safety analysis to deal with the file and also makes
the code a bit more readable. While touching the file also add a few more
assertions in debug mode that the right locks are held.
Reviewed By: markj
Differential Revision: https://reviews.freebsd.org/D29372
The man page says "The feenableexcept(), fedisableexcept(), and
fegetexcept() functions return a bitmap of the exceptions that were
unmasked prior to the call.", so we should return zero not -1.
Reviewed By: mhorne
MFC after: 3 days
Differential Revision: https://reviews.freebsd.org/D29386
- Defined MAXLINE constant (8192 octets by default instead 2048) for
centralized limit setting up. It sets maximum number of characters of
the syslog message. RFC5424 doesn't limit maximum size of the message.
Named after MAXLINE in syslogd(8).
- Fixed size of fmt_cpy buffer up to MAXLINE for rendering formatted
(%m) messages.
- Introduced autoexpansion of sending socket buffer up to MAXLINE.
MFC after: 1 month
Differential Revision: https://reviews.freebsd.org/D27205
After increasing the lib/msun/tests WARNS to 6, this triggers a
compilation error for RISC-V.
Fixes: 87d65c747a ("lib/msun: Allow building tests with WARNS=6")
Reported by: Jenkins
The LLVM bug was fixed a long time ago and with D29076 this test actually
passes now.
Reviewed By: andrew
Differential Revision: https://reviews.freebsd.org/D29092
If long double has more than 64 mantissa bits, using uint64_t to hold the
mantissa bits will truncate the value and result in test failures. To fix
this problem use __uint128_t since all platforms that have
__LDBL_MANT_DIG__ > 64 also have compiler support for 128-bit integers.
Reviewed By: rlibby
Differential Revision: https://reviews.freebsd.org/D29076
I only tested the WARNS=6 change on AArch64 and AMD64, but this file has
unused functions for architectures with LDBL_PREC == 53.
While touching this file change the LDBL_PREC == 53 checks to i386 checks.
The long double tests should only be disabled for i386 (due to the rather
odd rounding mode that it uses) not all architectures where long double
is the same as double.
PR: 205449
Fixes: 87d65c747a ("lib/msun: Allow building tests with WARNS=6")
Reported by: Jenkins
This warning is very rarely useful (inline is a hint and not mandatory).
This flag results in many warnings being printed when compiling C++
code that uses the standard library with GCC.
This flag was originally added in back in r94332 but the flag is a no-op
in Clang ("This diagnostic flag exists for GCC compatibility, and has no
effect in Clang"). Removing it should make the GCC build output slightly
more readable.
Reviewed By: jrtc27, imp
Differential Revision: https://reviews.freebsd.org/D29235
Some CPUs (e.g. AArch64 QEMU) cannot trap on floating point exceptions and
therefore ignore the writes to the floating point control register inside
feenableexcept(). If no exceptions are enabled after
feenableexcept(FE_ALL_EXCEPT), we can assume that the CPU does not
support exceptions and we can then skip the test.
Reviewed By: dim
Differential Revision: https://reviews.freebsd.org/D29095
These appears to have been resolved by compiling the test with -fno-builtin
and/or using a newer compiler.
PR: 208703
Reviewed By: ngie
Differential Revision: https://reviews.freebsd.org/D28884
This provides better error messages that just an assertion failure and
also makes it easier to mark individual tests as XFAIL.
It was also helpful when coming up with D28786 and D28787.
Differential Revision: https://reviews.freebsd.org/D28798
We want to allow the UEFI firmware to enumerate and assign
addresses to PCI devices so we can boot from NVMe[1]. Address
assignment of PCI BARs is properly handled by the PCI emulation
code in general, but a few specific cases need additional support.
fbuf and passthru map additional objects into the guest physical
address space and so need to handle address updates. Here we add a
callback to emulated PCI devices to inform them of a BAR
configuration change. fbuf and passthru then watch for these BAR
changes and relocate the frame buffer memory segment and passthru
device mmio area respectively.
We also add new VM_MUNMAP_MEMSEG and VM_UNMAP_PPTDEV_MMIO ioctls
to vmm(4) to facilitate the unmapping needed for addres updates.
[1]: https://github.com/freebsd/uefi-edk2/pull/9/
Originally by: scottph
MFC After: 1 week
Sponsored by: Intel Corporation
Reviewed by: grehan
Approved by: philip (mentor)
Differential Revision: https://reviews.freebsd.org/D24066
Summary:
This change currently (partially) duplicates AC1 freqbands as AC2
as they are not fully overlapping.
It then adds the 11ac netband to the "etsi" domain including
"indoor" and "dfs" flags, which we can deal with, as well as
appropriate (round down) maxpower values.
Comments are left for the actual frequency bands as we do use the
centerfreq for the first/last (chansep sized) channel in the
freqband and their "id" name, which can be confusing.
Sponsored-by: Rubicon Communications, LLC ("Netgate")
Reviewed-by: philip, adrian
MFC-after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D25999
In preparation for the move of the database out of base, add one more
path to lookup
Now the default lookup path is
1. base
2. localbase
3. localbase special site for custom terminfo (for ports adding custom
terminfo and avoid potential collision with the general db)
4. termcap
The plan is to allow the terminfo-db to be installed by end users via
a package for people willing to have the support for features from
this database provides. And keep the fallback on termcap for people who
don't want to hear about the terminfo db or how to configure the terminal
if it uses by default the features proposed in the definitions
of the terminfo db.
the first look up path is a window open for a proposal made by glebius@
consisting on creating a tool where the user at install time will select
the feature it want for a given terminal and generate its configurations
based on that. I won't work on it, but it is now posssible and there is
a path where to store those definitions
Now the .pc ends up in the correct package (-dev)
Reviewed by: bapt, emaste
Differential Revision: https://reviews.freebsd.org/D29172
MFC after: 2 weeks
Apparently GCC only supports arithmetic expressions that use static
const variables in initializers starting with GCC8. To keep older
versions happy use a macro instead.
Fixes: 221622ec0c ("lib/msun: Avoid FE_INEXACT for x86 log2l/log10l")
Reported by: Jenkins
Reviewed By: imp
Differential Revision: https://reviews.freebsd.org/D29233
With an out-of-tree Clang, we can use the -resource-dir flag when linking
to point it at the runtime libraries from the current SYSROOT.
This moves the path to the clang-internal library directory to a separate
.mk file that can be used by Makefiles that want to find the sanitizer
libraries. I intend to re-use this .mk file for my upcoming changes that
allow building the entire base system with ASAN/UBSAN/MSAN.
Reviewed By: dim
Differential Revision: https://reviews.freebsd.org/D28852
The existing code masked off all bits that it didn't know about. To be
future-proof, we should save and restore the entire fpcr/fpsr registers.
Additionally, the existing fesetenv() was incorrectly setting the rounding
mode in fpsr instead of fpcr.
This patch stores fpcr in the high 32 bits of fenv_t and fpsr in the low
bits instead of trying to interleave them in a single 32-bit field.
Technically, this is an ABI break if you re-compile parts of your code or
pass a fenv_t between DSOs that were compiled with different versions
of fenv.h. However, I believe we should fix this since the existing code
was broken and passing fenv_t across DSOs should rarely happen.
Reviewed By: andrew
Differential Revision: https://reviews.freebsd.org/D29160
This fixes tests/lib/msun/logarithm_test after compiling the test with
-fno-builtin (D28577). Adding invln10_lo + invln10_10 results in
FE_INEXACT (for all inputs) and the same for the log2l invln2_lo + invln2_hi.
This patch avoids FE_INEXACT (for exact results such as 0) by defining a
constant and using that.
Reviewed By: dim
Differential Revision: https://reviews.freebsd.org/D28786
Use errno to print a more descriptive error message when vm_open() fails
libvmm: preserve errno when vm_device_open() fails
vm_destroy() squashes errno by making a dive into sysctlbyname() - we
can safely skip vm_destroy() here since it's not doing any critical
clean up at this point. Replace vm_destroy() with a free() call.
PR: 250671
MFC after: 3 days
Submitted by: marko@apache.org
Reviewed by: grehan
Differential Revision: https://reviews.freebsd.org/D29109
Otherwise, programs compiled with -fprofile-instr-generate will
encounter undefined symbol errors during linking, for example
__llvm_profile_counter_bias, lprofSetRuntimeCounterRelocation and a few
others were missing from the profile library.
Reported by: ota@j.email.ne.jp
PR: 254001
MFC after: 3 days
Define an ifmedia_t type to use for ifmedia words.
Add ifconfig_media_lookup_* functions to lookup ifmedia words by name.
Get media options as an array of option names rather than formatting it
as a comma-delimited list into a buffer.
Sprinkle const on static the static description tables for peace of
mind.
Don't need to zero memory allocated by calloc.
Reviewed by: kp
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D29029
* A logically useless memset() is used to fault in some memory pages.
Change it to explicit_bzero so the compiler won't eliminate it.
* Eliminate the second memset. It made sense in the days of the Big
Kernel Lock, but not in the days of fine-grained SMP and especially
not in the days of VDSO.
MFC after: 2 weeks
Sponsored by: Axcient
Reviewed by: phk
Differential Revision: https://reviews.freebsd.org/D29047
First, r204494 introduced dpcpu_off in struct __kvm and it was allocated
from _kvm_dpcpu_init() but it was not free(3)'ed from kvm_close(3).
Second, r291406 introduced kvm_nlist2(3) and converted kvm_nlist(3) to
use the new function but it did not free the temporary buffer.
Also, check possible calloc(3) failure while I am in the neighborhood.
MFC after: 3 days
Differential Revision: https://reviews.freebsd.org/D29019
The old code had a O(n) loop, where n is the size of /dev/devstat.
Multiply that by another O(n) loop in devstat_mmap for a total of
O(n^2).
This change adds DIOCGMEDIASIZE support to /dev/devstat so userland can
quickly determine the right amount of memory to map, eliminating the
O(n) loop in userland.
This change decreases the time to run "gstat -bI0.001" with 16,384 md
devices from 29.7s to 4.2s.
Also, fix a memory leak first reported as PR 203097.
Sponsored by: Axcient
Reviewed by: mav, imp
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D28968
The name or jid always gets added to the params, and that's enough to
avoid allocating a 0 length params array.
Reported by: kevans
Reviewed by: kevans
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D28778
with the reasoning that the flags did not worked properly, and were not
shipped in a release.
O_RESOLVE_BENEATH is kept as useful.
Reviewed by: markj
Tested by: arichardson, pho
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
Differential revision: https://reviews.freebsd.org/D28907
Parentheses added to HASZERO macro to avoid a GCC warning, and formatted
with clang-format as we have adopted these and don't consider them
'contrib' code.
Obtained from: musl (snapshot at commit 4d0a82170a25)
Reviewed by: kib (libc integration), mjg (both earlier)
MFC after: 1 month
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D17630
The default behavior for attaching processes to jails is that the jail's
cpuset augments the attaching processes, so that it cannot be used to
escalate a user's ability to take advantage of more CPUs than the
administrator wanted them to.
This is problematic when root needs to manage jails that have disjoint
sets with whatever process is attaching, as this would otherwise result
in a deadlock. Therefore, if we did not have an appropriate common
subset of cpus/domains for our new policy, we now allow the process to
simply take on the jail set *if* it has the privilege to widen its mask
anyways.
With the new logic, root can still usefully cpuset a process that
attaches to a jail with the desire of maintaining the set it was given
pre-attachment while still retaining the ability to manage child jails
without jumping through hoops.
A test has been added to demonstrate the issue; cpuset of a process
down to just the first CPU and attempting to attach to a jail without
access to any of the same CPUs previously resulted in EDEADLK and now
results in taking on the jail's mask for privileged users.
PR: 253724
Reviewed by: jamie (also discussed with)
MFC after: 3 days
Differential Revision: https://reviews.freebsd.org/D28952
This flag has been set on startup since 65618fdda0.
However, This causes some of the math-related tests to fail as they report
zero instead of a tiny number. This fixes at least
/usr/tests/lib/msun/ldexp_test and possibly others.
Additionally, setting this flag prevents printf() from printing subnormal
numbers in decimal form.
See also https://www.openwall.com/lists/musl/2021/02/26/1
PR: 253847
Reviewed By: mmel
Differential Revision: https://reviews.freebsd.org/D28938
This caused LDBL_MANT_DIG to not be defined and therefore the scalbnl
alias was not being emitted for double==long double platforms.
Fixes: 760b2ffc ("Update scalbn* functions to the musl versions")
Reported by: Jenkins
We could just use a C implementation using __builtin_fabs(), but using
this assembly version guarantees that there is no additional prolog/epilog
code. Additionally, clang generates worse code for masking off the top bit
than GCC: https://bugs.llvm.org/show_bug.cgi?id=49377.
This fixes the RISCV64 softfloat world build after cf97d2a1da. That commit
added -fno-builtin to the msun tests which resulted in the first references to
fabs (previously the compiler inlined all calls).
Reviewed By: dim
Reported by: mjg
Differential Revision: https://reviews.freebsd.org/D28994
The only diff compared to musl is a minor change to scalbnl() to replace
musl's union ldshape with union IEEEl2bits.
This fixes the scalbn tests on non-x86 (since x86 has an assembly version
that is used instead).
Musl commit messages:
commit 8c44a060243f04283ca68dad199aab90336141db
Author: Szabolcs Nagy <nsz@port70.net>
Date: Mon Apr 3 02:38:13 2017 +0200
fix scalbn when result is in the subnormal range
in nearest rounding mode scalbn could introduce double rounding error
when an intermediate value and the final result were both in the
subnormal range e.g.
scalbn(0x1.7ffffffffffffp-1, -1073)
returned 0x1p-1073 instead of 0x1p-1074, because the intermediate
computation got rounded to 0x1.8p-1023.
with the fix an intermediate value can only be in the subnormal range
if the final result is 0 which is correct even after double rounding.
(there still can be two roundings so signals may be raised twice, but
that's only observable with trapping exceptions which is not supported.)
commit 2eaed464e2080d8321d3903b71086a1ecfc4ee4a
Author: Szabolcs Nagy <nsz@port70.net>
Date: Wed Sep 4 15:52:54 2013 +0000
math: use float_t and double_t in scalbnf and scalbn
remove STRICT_ASSIGN (c99 semantics is assumed) and use the conventional
union to prepare the scaling factor (so libm.h is no longer needed)
commit 1b77b9072f374bd26eb0574b83a0d5f18d75ec60
Author: Szabolcs Nagy <nsz@port70.net>
Date: Thu Aug 15 10:07:46 2013 +0000
math: minor scalbn*.c simplification
commit c4359e01303da2755fe7e8033826b132eb3659b1
Author: Szabolcs Nagy <nsz@port70.net>
Date: Tue Nov 13 10:55:35 2012 +0100
math: excess precision fix modf, modff, scalbn, scalbnf
old code was correct only if the result was stored (without the
excess precision) or musl was compiled with -ffloat-store.
now we use STRICT_ASSIGN to work around the issue.
(see note 160 in c11 section 6.8.6.4)
commit 666271c105e4137bdfa195e217799d74143370d4
Author: Szabolcs Nagy <nsz@port70.net>
Date: Tue Nov 13 10:30:40 2012 +0100
math: fix scalbn and scalbnf on overflow/underflow
old code was correct only if the result was stored (without the
excess precision) or musl was compiled with -ffloat-store.
(see note 160 in n1570.pdf section 6.8.6.4)
commit 8051e08e10d2b739fcfcbc6bc7466e8d77fa49f1
Author: nsz <nsz@port70.net>
Date: Mon Mar 19 10:54:07 2012 +0100
simplify scalbn*.c implementations
The old scalbn.c was wrong and slow, the new one is just slow.
(scalbn(0x1p+1023,-2097) should give 0x1p-1074, but the old code gave 0)
Reviewed By: dim
Differential Revision: https://reviews.freebsd.org/D28872
Building R on powerpc64 exposed a problem in fpsetmask() whereby we
were not properly clamping the provided mask to the valid range.
This same issue affects powerpc and powerpcspe.
Properly limit the range of bits that can be set via fpsetmask().
While here, use the correct fp_except_t type instead of fp_rnd_t.
Reported by: pkubaj, jhibbits (in IRC)
Sponsored by: Tag1 Consulting, Inc.
MFC after: 1 week
Building R exposed a problem in fpsetmask() whereby we were not properly
clamping the provided mask to the valid range.
R initilizes the mask by calling fpsetmask(~0) on FreeBSD. Since we
recently enabled precise exceptions, this was causing an immediate
SIGFPE because we were attempting to set invalid bits in the fpscr.
Properly limit the range of bits that can be set via fpsetmask().
While here, use the correct fp_except_t type instead of fp_rnd_t.
Reported by: pkubaj (in IRC)
MFC after: 1 week
Sponsored by: Tag1 Consulting, Inc.
This should return -1 with OTHER/ENOMEM set in the handle when malloc
fails, like everywhere else in libifconfig.
Reviewed by: kp
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D28964
Regenerate the list of generated symbols for libifconfig:
```
grep -hr ^ifconfig_sfp_ /usr/obj/usr/src/amd64.amd64/lib/libifconfig \
| sed 's/(.*/;/' | sort -u
```
Spotted by build failures caused by a missing symbol while working on
upgrading libifconfig from internal to private.
Reviewed by: markj
Differential Revision: https://reviews.freebsd.org/D28927
Remove -x flag from sh used to execute MKuserdefs.sh during ncurses
build and stop polluting make -s output
Reviewed by: bapt, manu
Approved by: bapt
Differential Revision: https://reviews.freebsd.org/D28885
Along with the termcap database, ncurses will now lookup for the
terminfo database, note that the terminfo database is being looked
up first and then it fallsback on the termcap one.
While here drop our custom reader for the termcap database, over the
time it is needed maintenance to be able to catchup with changes on ncurses
side.
Install the ncurses tools which are needed to deal with the terminfo
database: tic, infocmp, toe
Replace our termcap only aware tools with the ncurses counterpart:
tput, tabs, tset, clear and reset
In particular they can your the extra capabilities described in the
terminfo database, which does not exist in termcap
Note that to add a new terminfo information to the database from ports
the ports will just need to add their extra information into:
/usr/local/share/site-terminfo/<firstletteroftheterm>/<term>
Tested by: jbeich, manu
This forces the compiler to emit calls to libm functions, instead of
possibly substituting pre-calculated results at compile time, which
should help to actually test those functions.
Reviewed by: emaste, arichardson, ngie
Differential Revision: https://reviews.freebsd.org/D28577
MFC after: 3 days
All supported platforms support thread-local vars and __thread.
Reviewed by: emaste
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D28796
The makefs msdosfs code includes fs/msdosfs/denode.h which directly uses
struct buf from <sys/buf.h> rather than the makefs struct m_buf.
To work around this problem provide a local denode.h that includes
ffs/buf.h and defines buf as an alias for m_buf.
Reviewed By: kib, emaste
Differential Revision: https://reviews.freebsd.org/D28835
I did this without a full vendor update since that would cause too many
conflicts. Since these files now almost match the NetBSD sources the
next git subtree merge should work just fine.
Reviewed By: lwhsu
Differential Revision: https://reviews.freebsd.org/D28797
