EABI ARM kernels or clang-compiled ARM kernels.
This fixes a crash seen in clang-compiled ARM
kernels that include WITNESS.
This code could be easily modified to walk the stack
for current clang-generated code (including EABI)
but Andrew Turner has raised concerns that the
stack frame currently emitted by clang isn't actually
required by EABI so such a change might cause problems
down the road.
In case anyone wants to experiment, the change
to support current clang-compiled kernels
involves simply setting FR_RFP=0 and FR_SCP=1.
functions, reverse the numbering scheme for the levels. The highest
numbered level in the tree now appears near the root instead of the leaves.
Sponsored by: EMC / Isilon Storage Division
With "cached read" HDD testing and multiple ports busy on a SATA
host controller, 3726/3826 PMP will very rarely drop a deferred
R_OK that was intended for the host. Symptom will be all 5 drives
under test will timeout, get reset, and recover.
Submitted by: Rich Futyma <rich.futyma@sanmina.com>
MFC after: 2 weeks
null_hashget() obtains the reference on the nullfs vnode, which must
be dropped.
- Fix a wart which existed from the introduction of the nullfs
caching, do not unlock lower vnode in the nullfs_reclaim_lowervp().
It should be innocent, but now it is also formally safe. Inform the
nullfs_reclaim() about this using the NULLV_NOUNLOCK flag set on
nullfs inode.
- Add a callback to the upper filesystems for the lower vnode
unlinking. When inactivating a nullfs vnode, check if the lower
vnode was unlinked, indicated by nullfs flag NULLV_DROP or VV_NOSYNC
on the lower vnode, and reclaim upper vnode if so. This allows
nullfs to purge cached vnodes for the unlinked lower vnode, avoiding
excessive caching.
Reported by: G??ran L??wkrantz <goran.lowkrantz@ismobile.com>
Tested by: pho
Sponsored by: The FreeBSD Foundation
MFC after: 2 weeks
a non-loss reset.
When the drain functions are called, the holding descriptor and link pointers
are NULLed out.
But when the processq function is called during a non-loss reset, this
doesn't occur. So the next time a DMA occurs, it's chained to a descriptor
that no longer exists and the hardware gets angry.
Tested:
* AR5416, STA mode; use sysctl dev.ath.X.forcebstuck=1 to force a non-loss
reset.
TODO:
* Further AR9380 testing just to check that the behaviour for the EDMA
chips is sane.
PR: kern/178477
before using said node.
The "blessed" way here is to take a node reference before referencing
anything inside the node, otherwise the node can be freed between
the time the pointer is copied/dereferenced and the time the node contents
are used.
This mirrors fixes that I've done elsewhere in the net80211/driver
stack.
PR: kern/178470
the beaglebone-specific .dts file.
Add a new .dts for the BeagleBone Black with more memory,
slightly different pinmux initialization, and with mmchs1
configured (though the latter doesn't quite work yet).
options OCTEON_VENDOR_GEFES to enable support for these boards, to
match changes that GE publishes to the Octeon Simple Executive. Since
board types overlap with other boards, it is unlikely that we will
properly boot on other Octeon boards with OCTEON_VENDOR_GEFES enabled.
Tested extensively on the WANIC 6354, but I retained support for all
the other models. Some features need changes in the base kernel, and
those are in progress.
An array-type stat in vmm.ko is defined as follows:
VMM_STAT_ARRAY(IPIS_SENT, VM_MAXCPU, "ipis sent to vcpu");
It is incremented as follows:
vmm_stat_array_incr(vm, vcpuid, IPIS_SENT, array_index, 1);
And output of 'bhyvectl --get-stats' looks like:
ipis sent to vcpu[0] 3114
ipis sent to vcpu[1] 0
Reviewed by: grehan
Obtained from: NetApp
the Linux tree that they always include this chip in their FDT, so
make support for the ds1337 opt-out rather than opt-in. Now my boards
boot with the correct time.
Convert the structures to C99 style initialisation, which makes it
a lot easier to check that all of them are set and to generate a
derived template from them.
Sponsored by: DARPA, AFRL
MFC after: 2 weeks
assigned conflicting ranges to BARs then leaving the BARs alone could
result in one device stealing mmio accesses intended to go to a second
device. Prior to 233677 the PCI bus driver attempted to handle this case
by clearing the BAR to 0 depending on BARs based at 0 not decoding (which
is not guaranteed to be true). Now when a conflicting BAR is detected the
following steps are taken:
1) If hw.pci.realloc_bars (a new tunable) is enabled (default is enabled),
then ignore the current BAR setting from the firmware and attempt to
allocate a fresh resource range for the BAR.
2) If 1) failed (or was disabled), disable decoding for the relevant
BAR type (e.g. disable mem decoding for a memory BAR) and emit a
warning if booting verbose.
Tested by: Alex Keda <admin@lissyara.su>
MFC after: 1 week
to 63 bit positions.
Do not fill the save area and do not set the saved bit in the xstate
bit vector for the state which is not marked as enabled in xsave_mask.
Reported and tested by: Jim Ohlstein <jim@ohlste.in>
MFC after: 3 days
irrespective of the setting of lem_rx_process_limit, while
giving a chance to the taskqueue scheduler to act after
each chunk.
This makes lem_rxeof similar to the one in if_em.c and if_igb.c .
if_lem.c and if_em.c: add a sysctl to manually configure the
'itr' moderation register.
Approved by: Jack Vogel
locks. To support this, VNODE locks are created with the LK_IS_VNODE
flag. This flag is propagated down using the LO_IS_VNODE flag.
Note that WITNESS still records the LOR. Only the printing and the
optional entering into the kernel debugger is bypassed with the
WITNESS_NO_VNODE option.
all requested data was sent. The reason is that xfsize <= 0 condition
must not be tested at all if space == loopbytes. Otherwise, the done
is set to 1, and sendfile(2) is aborted too early.
Instead of moving the condition to exiting the inner loop after the
xfersize check, directly check for the completed transfer before the
testing of the available space in the socket buffer, and revert item 1
of r248830. It is arguably another bug to sleep waiting for socket
buffer space (or return EAGAIN for non-blocking socket) if all bytes
are already transferred.
Reported by: pho
Discussed with: scottl, gibbs
Tested by: scottl (stable/9 backport), pho
redefine such operations for different consumers.
This will be used when NUMA support will be finished and numaset
will need to be used.
Sponsored by: EMC / Isilon storage division
Obtained from: jeff
Reviewed by: alc
of "right".)
Flip back on the "always continue TX DMA using the holding descriptor"
code - by always setting ATH_BUF_BUSY and never setting axq_link to NULL.
Since the holding descriptor is accessed via txq->axq_link and _that_
is done behind the TXQ lock rather than the TX path lock, the holding
descriptor stuff itself needs to be behind the TXQ lock.
So, do the mental gymnastics needed to do this.
I've not seen any of the hardware failures that I was seeing when
I last tried to do this.
Tested:
* AR5416, STA mode
Until an ADM6996 driver shows up, this allows for the two switch
ports to be used.
Submitted by: Luiz Otavio O Souza <loos.br@gmail.com>
Reviewed by: ray
* Fix API changes;
* remove unused code;
* Allow some switches to be used that don't expose a set of PHY
registers for the CPU facing port (eg the ADM6996 for the Ubiquiti
Routerstation.)
Submitted by: Luiz Otavio O Souza <loos.br@gmail.com>
Reviewed by: ray
This adds a vlan capability field to etherswitch_info structure and some
definitions of ports flags.
It adds the support to global config parameters which right now is used
only to switch between the vlan modes, but it is intended to be extended
to support the setup of others parameters (STP, mirror, etc.).
Submitted by: Luiz Otavio O Souza <loos.br@gmail.com>
Reviewed by: ray
Use if_initbaudrate() to set baudrate.
Add IFCAP_LINKSTATE to if_capabilities.
Submitted by: David C Somayajulu <davidcs@freebsd.org>
Approved by: George Neville-Neil <gnn@freebsd.org>
do drain (flush_workqueue() in Linux terms) but instead returns true if
the work was removed before it is run, or false otherwise.
Simulate this by removing the taskqueue_drain() and return the value
derived from taskqueue_cancel()'s return value.
This would solve a witness warning caused by calling taskqueue_drain()
with a non-sleepable lock held, like:
taskqueue_drain with the following non-sleepable locks held:
exclusive rw lle (lle) r = 0 (0xfffffe001450b410) locked @
/usr/src/sys/netinet/in.c:1484
KDB: stack backtrace:
db_trace_self_wrapper() at db_trace_self_wrapper+0x2b/frame 0xffffff848d4f7690
kdb_backtrace() at kdb_backtrace+0x39/frame 0xffffff848d4f7740
witness_warn() at witness_warn+0x4a8/frame 0xffffff848d4f7800
taskqueue_drain() at taskqueue_drain+0x3a/frame 0xffffff848d4f7840
set_timeout() at set_timeout+0x4a/frame 0xffffff848d4f7860
netevent_callback() at netevent_callback+0x16/frame 0xffffff848d4f7870
arpintr() at arpintr+0x9b5/frame 0xffffff848d4f7930
This do not affect kernel without OFED compiled in.
Reported by: Garrett Cooper <yaneurabeya gmail com>
(who also tested an earlier version of this patch,
but bugs are mine)
MFC after: 2 weeks
